From: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> To: Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Masami Hiramatsu <mhiramat@kernel.org> Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Subject: [PATCH 4/9] ARM: dts: uniphier: Rename gpio-hog node Date: Mon, 4 Jul 2022 09:20:21 +0900 [thread overview] Message-ID: <1656894026-15707-5-git-send-email-hayashi.kunihiko@socionext.com> (raw) In-Reply-To: <1656894026-15707-1-git-send-email-hayashi.kunihiko@socionext.com> According to gpio-hog schema, should add the suffix "-hog" to the node names including gpio-hog to fix the following warning. uniphier-pro4-ref.dtb: gpio@55000000: 'xirq2' does not match any of the regexes: '^.+-hog(-[0-9+)?$', 'pinctrl-[0-9]+' From schema: Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml This applies to the devicetree for LD4, LD6b, Pro4 and sLD8 SoCs. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> --- arch/arm/boot/dts/uniphier-ld4-ref.dts | 2 +- arch/arm/boot/dts/uniphier-ld6b-ref.dts | 2 +- arch/arm/boot/dts/uniphier-pro4-ref.dts | 2 +- arch/arm/boot/dts/uniphier-sld8-ref.dts | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/uniphier-ld4-ref.dts b/arch/arm/boot/dts/uniphier-ld4-ref.dts index c46c2e8a10a7..e2d25c9160bd 100644 --- a/arch/arm/boot/dts/uniphier-ld4-ref.dts +++ b/arch/arm/boot/dts/uniphier-ld4-ref.dts @@ -56,7 +56,7 @@ &serial3 { }; &gpio { - xirq1 { + xirq1-hog { gpio-hog; gpios = <UNIPHIER_GPIO_IRQ(1) 0>; input; diff --git a/arch/arm/boot/dts/uniphier-ld6b-ref.dts b/arch/arm/boot/dts/uniphier-ld6b-ref.dts index 5bc7fe11b517..4f5e8848cecf 100644 --- a/arch/arm/boot/dts/uniphier-ld6b-ref.dts +++ b/arch/arm/boot/dts/uniphier-ld6b-ref.dts @@ -60,7 +60,7 @@ &serial2 { }; &gpio { - xirq4 { + xirq4-hog { gpio-hog; gpios = <UNIPHIER_GPIO_IRQ(4) 0>; input; diff --git a/arch/arm/boot/dts/uniphier-pro4-ref.dts b/arch/arm/boot/dts/uniphier-pro4-ref.dts index 3b9b61314d01..cc2cae935b5d 100644 --- a/arch/arm/boot/dts/uniphier-pro4-ref.dts +++ b/arch/arm/boot/dts/uniphier-pro4-ref.dts @@ -59,7 +59,7 @@ &serial2 { }; &gpio { - xirq2 { + xirq2-hog { gpio-hog; gpios = <UNIPHIER_GPIO_IRQ(2) 0>; input; diff --git a/arch/arm/boot/dts/uniphier-sld8-ref.dts b/arch/arm/boot/dts/uniphier-sld8-ref.dts index 6db949ec7411..b73647bafc63 100644 --- a/arch/arm/boot/dts/uniphier-sld8-ref.dts +++ b/arch/arm/boot/dts/uniphier-sld8-ref.dts @@ -56,7 +56,7 @@ &serial3 { }; &gpio { - xirq0 { + xirq0-hog { gpio-hog; gpios = <UNIPHIER_GPIO_IRQ(0) 0>; input; -- 2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> To: Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Masami Hiramatsu <mhiramat@kernel.org> Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Subject: [PATCH 4/9] ARM: dts: uniphier: Rename gpio-hog node Date: Mon, 4 Jul 2022 09:20:21 +0900 [thread overview] Message-ID: <1656894026-15707-5-git-send-email-hayashi.kunihiko@socionext.com> (raw) In-Reply-To: <1656894026-15707-1-git-send-email-hayashi.kunihiko@socionext.com> According to gpio-hog schema, should add the suffix "-hog" to the node names including gpio-hog to fix the following warning. uniphier-pro4-ref.dtb: gpio@55000000: 'xirq2' does not match any of the regexes: '^.+-hog(-[0-9+)?$', 'pinctrl-[0-9]+' From schema: Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml This applies to the devicetree for LD4, LD6b, Pro4 and sLD8 SoCs. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> --- arch/arm/boot/dts/uniphier-ld4-ref.dts | 2 +- arch/arm/boot/dts/uniphier-ld6b-ref.dts | 2 +- arch/arm/boot/dts/uniphier-pro4-ref.dts | 2 +- arch/arm/boot/dts/uniphier-sld8-ref.dts | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/uniphier-ld4-ref.dts b/arch/arm/boot/dts/uniphier-ld4-ref.dts index c46c2e8a10a7..e2d25c9160bd 100644 --- a/arch/arm/boot/dts/uniphier-ld4-ref.dts +++ b/arch/arm/boot/dts/uniphier-ld4-ref.dts @@ -56,7 +56,7 @@ &serial3 { }; &gpio { - xirq1 { + xirq1-hog { gpio-hog; gpios = <UNIPHIER_GPIO_IRQ(1) 0>; input; diff --git a/arch/arm/boot/dts/uniphier-ld6b-ref.dts b/arch/arm/boot/dts/uniphier-ld6b-ref.dts index 5bc7fe11b517..4f5e8848cecf 100644 --- a/arch/arm/boot/dts/uniphier-ld6b-ref.dts +++ b/arch/arm/boot/dts/uniphier-ld6b-ref.dts @@ -60,7 +60,7 @@ &serial2 { }; &gpio { - xirq4 { + xirq4-hog { gpio-hog; gpios = <UNIPHIER_GPIO_IRQ(4) 0>; input; diff --git a/arch/arm/boot/dts/uniphier-pro4-ref.dts b/arch/arm/boot/dts/uniphier-pro4-ref.dts index 3b9b61314d01..cc2cae935b5d 100644 --- a/arch/arm/boot/dts/uniphier-pro4-ref.dts +++ b/arch/arm/boot/dts/uniphier-pro4-ref.dts @@ -59,7 +59,7 @@ &serial2 { }; &gpio { - xirq2 { + xirq2-hog { gpio-hog; gpios = <UNIPHIER_GPIO_IRQ(2) 0>; input; diff --git a/arch/arm/boot/dts/uniphier-sld8-ref.dts b/arch/arm/boot/dts/uniphier-sld8-ref.dts index 6db949ec7411..b73647bafc63 100644 --- a/arch/arm/boot/dts/uniphier-sld8-ref.dts +++ b/arch/arm/boot/dts/uniphier-sld8-ref.dts @@ -56,7 +56,7 @@ &serial3 { }; &gpio { - xirq0 { + xirq0-hog { gpio-hog; gpios = <UNIPHIER_GPIO_IRQ(0) 0>; input; -- 2.25.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-07-04 0:21 UTC|newest] Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-07-04 0:20 [PATCH 0/9] Update UniPhier armv7 devicetree Kunihiko Hayashi 2022-07-04 0:20 ` Kunihiko Hayashi 2022-07-04 0:20 ` [PATCH 1/9] ARM: dts: uniphier: Fix USB interrupts for PXs2 SoC Kunihiko Hayashi 2022-07-04 0:20 ` Kunihiko Hayashi 2022-07-04 0:20 ` [PATCH 2/9] ARM: dts: uniphier: Rename pvtctl node to thermal-sensor Kunihiko Hayashi 2022-07-04 0:20 ` Kunihiko Hayashi 2022-07-04 0:20 ` [PATCH 3/9] ARM: dts: uniphier: Rename usb-phy node to usb-glue Kunihiko Hayashi 2022-07-04 0:20 ` Kunihiko Hayashi 2022-07-04 0:20 ` Kunihiko Hayashi [this message] 2022-07-04 0:20 ` [PATCH 4/9] ARM: dts: uniphier: Rename gpio-hog node Kunihiko Hayashi 2022-07-04 0:20 ` [PATCH 5/9] ARM: dts: uniphier: Use GIC interrupt definitions Kunihiko Hayashi 2022-07-04 0:20 ` Kunihiko Hayashi 2022-07-04 0:20 ` [PATCH 6/9] ARM: dts: uniphier: Add ahci controller and glue layer nodes for Pro4 Kunihiko Hayashi 2022-07-04 0:20 ` Kunihiko Hayashi 2022-07-04 0:20 ` [PATCH 7/9] ARM: dts: uniphier: Add ahci controller and glue layer nodes for PXs2 Kunihiko Hayashi 2022-07-04 0:20 ` Kunihiko Hayashi 2022-07-04 0:20 ` [PATCH 8/9] ARM: dts: uniphier: Move interrupt-parent property to each child node in uniphier-support-card Kunihiko Hayashi 2022-07-04 0:20 ` Kunihiko Hayashi 2022-07-04 0:20 ` [PATCH 9/9] ARM: dts: uniphier: Remove compatible "snps,dw-pcie-ep" from Pro5 pcie-ep node Kunihiko Hayashi 2022-07-04 0:20 ` Kunihiko Hayashi 2022-07-30 11:58 ` Arnd Bergmann 2022-07-30 11:58 ` Arnd Bergmann 2022-08-02 8:33 ` Krzysztof Kozlowski 2022-08-02 8:33 ` Krzysztof Kozlowski 2022-08-02 13:10 ` Kunihiko Hayashi 2022-08-02 13:10 ` Kunihiko Hayashi 2022-08-03 6:11 ` Krzysztof Kozlowski 2022-08-03 6:11 ` Krzysztof Kozlowski 2022-08-04 6:26 ` Kunihiko Hayashi 2022-08-04 6:26 ` Kunihiko Hayashi
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1656894026-15707-5-git-send-email-hayashi.kunihiko@socionext.com \ --to=hayashi.kunihiko@socionext.com \ --cc=devicetree@vger.kernel.org \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=mhiramat@kernel.org \ --cc=robh+dt@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.