From: Kalle Valo <kvalo@kernel.org>
To: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Cc: <ath11k@lists.infradead.org>, <linux-wireless@vger.kernel.org>,
Sowmiya Sree Elavalagan <quic_ssreeela@quicinc.com>,
Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Subject: Re: [PATCH] wifi: ath11k: Add support to configure FTM responder role
Date: Tue, 17 Jan 2023 11:56:39 +0000 (UTC) [thread overview]
Message-ID: <167395659797.22891.14339771925238967315.kvalo@kernel.org> (raw)
In-Reply-To: <20221220044435.10506-1-quic_rajkbhag@quicinc.com>
Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> wrote:
> Fine Timing Measurement(FTM) support is used to measure round trip
> time between two nodes.
>
> Enable FTM responder feature using hw_params on supported device.
> Since FTM functionality is offloaded to firmware, adding the
> interface allows user space to enable or disable FTM responder.
> Also add support for advertising the same in extended capabilities.
>
> QCA6390, WCN6855 and WCN6750 do not support this feature.
>
> Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
> Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
>
> Signed-off-by: Sowmiya Sree Elavalagan <quic_ssreeela@quicinc.com>
> Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Patch applied to ath-next branch of ath.git, thanks.
a27c6a5853eb wifi: ath11k: Add support to configure FTM responder role
--
https://patchwork.kernel.org/project/linux-wireless/patch/20221220044435.10506-1-quic_rajkbhag@quicinc.com/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
WARNING: multiple messages have this Message-ID (diff)
From: Kalle Valo <kvalo@kernel.org>
To: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Cc: <ath11k@lists.infradead.org>, <linux-wireless@vger.kernel.org>,
Sowmiya Sree Elavalagan <quic_ssreeela@quicinc.com>,
Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Subject: Re: [PATCH] wifi: ath11k: Add support to configure FTM responder role
Date: Tue, 17 Jan 2023 11:56:39 +0000 (UTC) [thread overview]
Message-ID: <167395659797.22891.14339771925238967315.kvalo@kernel.org> (raw)
In-Reply-To: <20221220044435.10506-1-quic_rajkbhag@quicinc.com>
Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> wrote:
> Fine Timing Measurement(FTM) support is used to measure round trip
> time between two nodes.
>
> Enable FTM responder feature using hw_params on supported device.
> Since FTM functionality is offloaded to firmware, adding the
> interface allows user space to enable or disable FTM responder.
> Also add support for advertising the same in extended capabilities.
>
> QCA6390, WCN6855 and WCN6750 do not support this feature.
>
> Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
> Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
>
> Signed-off-by: Sowmiya Sree Elavalagan <quic_ssreeela@quicinc.com>
> Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Patch applied to ath-next branch of ath.git, thanks.
a27c6a5853eb wifi: ath11k: Add support to configure FTM responder role
--
https://patchwork.kernel.org/project/linux-wireless/patch/20221220044435.10506-1-quic_rajkbhag@quicinc.com/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
--
ath11k mailing list
ath11k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath11k
next prev parent reply other threads:[~2023-01-17 11:56 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-20 4:44 [PATCH] wifi: ath11k: Add support to configure FTM responder role Raj Kumar Bhagat
2022-12-20 4:44 ` Raj Kumar Bhagat
2023-01-17 11:56 ` Kalle Valo [this message]
2023-01-17 11:56 ` Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=167395659797.22891.14339771925238967315.kvalo@kernel.org \
--to=kvalo@kernel.org \
--cc=ath11k@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
--cc=quic_rajkbhag@quicinc.com \
--cc=quic_ssreeela@quicinc.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.