From: Geert Uytterhoeven <geert+renesas@glider.be> To: "Magnus Damm" <magnus.damm@gmail.com>, "Niklas Söderlund" <niklas.soderlund+renesas@ragnatech.se> Cc: linux-renesas-soc@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Geert Uytterhoeven <geert+renesas@glider.be> Subject: [PATCH 1/3] ARM: dts: renesas: r8a73a4: Add TMU nodes Date: Tue, 19 Mar 2024 17:29:05 +0100 [thread overview] Message-ID: <1a60832f3ba37afb4a5791f4e5db4610ab31beb3.1710864964.git.geert+renesas@glider.be> (raw) In-Reply-To: <cover.1710864964.git.geert+renesas@glider.be> Add device nodes for the Timer Units (TMU) on the R-Mobile APE6 SoC, and the clocks serving them. Note that TMU channels 1 and 2 are not added, as their interrupts are not wired to the interrupt controller for the AP-System Core (INTC-SYS), only to the interrupt controller for the AP-Realtime Core (INTC-RT). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- arch/arm/boot/dts/renesas/r8a73a4.dtsi | 37 +++++++++++++++++++++++ include/dt-bindings/clock/r8a73a4-clock.h | 4 +++ 2 files changed, 41 insertions(+) diff --git a/arch/arm/boot/dts/renesas/r8a73a4.dtsi b/arch/arm/boot/dts/renesas/r8a73a4.dtsi index ac654ff45d0e9a9c..9a2ae282a46ba4b1 100644 --- a/arch/arm/boot/dts/renesas/r8a73a4.dtsi +++ b/arch/arm/boot/dts/renesas/r8a73a4.dtsi @@ -60,6 +60,32 @@ timer { <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; }; + tmu0: timer@e61e0000 { + compatible = "renesas,tmu-r8a73a4", "renesas,tmu"; + reg = <0 0xe61e0000 0 0x30>; + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2"; + clocks = <&mstp1_clks R8A73A4_CLK_TMU0>; + clock-names = "fck"; + power-domains = <&pd_c5>; + status = "disabled"; + }; + + tmu3: timer@fff80000 { + compatible = "renesas,tmu-r8a73a4", "renesas,tmu"; + reg = <0 0xfff80000 0 0x30>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2"; + clocks = <&mstp1_clks R8A73A4_CLK_TMU3>; + clock-names = "fck"; + power-domains = <&pd_a3r>; + status = "disabled"; + }; + dbsc1: memory-controller@e6790000 { compatible = "renesas,dbsc-r8a73a4"; reg = <0 0xe6790000 0 0x10000>; @@ -654,6 +680,17 @@ extal1_div2_clk: extal1_div2 { }; /* Gate clocks */ + mstp1_clks: mstp1_clks@e6150134 { + compatible = "renesas,r8a73a4-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>; + clocks = <&cp_clk>, <&mp_clk>; + #clock-cells = <1>; + clock-indices = < + R8A73A4_CLK_TMU0 R8A73A4_CLK_TMU3 + >; + clock-output-names = + "tmu0", "tmu3"; + }; mstp2_clks: mstp2_clks@e6150138 { compatible = "renesas,r8a73a4-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150138 0 4>, <0 0xe6150040 0 4>; diff --git a/include/dt-bindings/clock/r8a73a4-clock.h b/include/dt-bindings/clock/r8a73a4-clock.h index 1ec4827b80916054..655440a3e7c6868a 100644 --- a/include/dt-bindings/clock/r8a73a4-clock.h +++ b/include/dt-bindings/clock/r8a73a4-clock.h @@ -24,6 +24,10 @@ #define R8A73A4_CLK_ZS 14 #define R8A73A4_CLK_HP 15 +/* MSTP1 */ +#define R8A73A4_CLK_TMU0 25 +#define R8A73A4_CLK_TMU3 21 + /* MSTP2 */ #define R8A73A4_CLK_DMAC 18 #define R8A73A4_CLK_SCIFB3 17 -- 2.34.1
WARNING: multiple messages have this Message-ID (diff)
From: Geert Uytterhoeven <geert+renesas@glider.be> To: "Magnus Damm" <magnus.damm@gmail.com>, "Niklas Söderlund" <niklas.soderlund+renesas@ragnatech.se> Cc: linux-renesas-soc@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Geert Uytterhoeven <geert+renesas@glider.be> Subject: [PATCH 1/3] ARM: dts: renesas: r8a73a4: Add TMU nodes Date: Tue, 19 Mar 2024 17:29:05 +0100 [thread overview] Message-ID: <1a60832f3ba37afb4a5791f4e5db4610ab31beb3.1710864964.git.geert+renesas@glider.be> (raw) In-Reply-To: <cover.1710864964.git.geert+renesas@glider.be> Add device nodes for the Timer Units (TMU) on the R-Mobile APE6 SoC, and the clocks serving them. Note that TMU channels 1 and 2 are not added, as their interrupts are not wired to the interrupt controller for the AP-System Core (INTC-SYS), only to the interrupt controller for the AP-Realtime Core (INTC-RT). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- arch/arm/boot/dts/renesas/r8a73a4.dtsi | 37 +++++++++++++++++++++++ include/dt-bindings/clock/r8a73a4-clock.h | 4 +++ 2 files changed, 41 insertions(+) diff --git a/arch/arm/boot/dts/renesas/r8a73a4.dtsi b/arch/arm/boot/dts/renesas/r8a73a4.dtsi index ac654ff45d0e9a9c..9a2ae282a46ba4b1 100644 --- a/arch/arm/boot/dts/renesas/r8a73a4.dtsi +++ b/arch/arm/boot/dts/renesas/r8a73a4.dtsi @@ -60,6 +60,32 @@ timer { <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; }; + tmu0: timer@e61e0000 { + compatible = "renesas,tmu-r8a73a4", "renesas,tmu"; + reg = <0 0xe61e0000 0 0x30>; + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2"; + clocks = <&mstp1_clks R8A73A4_CLK_TMU0>; + clock-names = "fck"; + power-domains = <&pd_c5>; + status = "disabled"; + }; + + tmu3: timer@fff80000 { + compatible = "renesas,tmu-r8a73a4", "renesas,tmu"; + reg = <0 0xfff80000 0 0x30>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2"; + clocks = <&mstp1_clks R8A73A4_CLK_TMU3>; + clock-names = "fck"; + power-domains = <&pd_a3r>; + status = "disabled"; + }; + dbsc1: memory-controller@e6790000 { compatible = "renesas,dbsc-r8a73a4"; reg = <0 0xe6790000 0 0x10000>; @@ -654,6 +680,17 @@ extal1_div2_clk: extal1_div2 { }; /* Gate clocks */ + mstp1_clks: mstp1_clks@e6150134 { + compatible = "renesas,r8a73a4-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>; + clocks = <&cp_clk>, <&mp_clk>; + #clock-cells = <1>; + clock-indices = < + R8A73A4_CLK_TMU0 R8A73A4_CLK_TMU3 + >; + clock-output-names = + "tmu0", "tmu3"; + }; mstp2_clks: mstp2_clks@e6150138 { compatible = "renesas,r8a73a4-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150138 0 4>, <0 0xe6150040 0 4>; diff --git a/include/dt-bindings/clock/r8a73a4-clock.h b/include/dt-bindings/clock/r8a73a4-clock.h index 1ec4827b80916054..655440a3e7c6868a 100644 --- a/include/dt-bindings/clock/r8a73a4-clock.h +++ b/include/dt-bindings/clock/r8a73a4-clock.h @@ -24,6 +24,10 @@ #define R8A73A4_CLK_ZS 14 #define R8A73A4_CLK_HP 15 +/* MSTP1 */ +#define R8A73A4_CLK_TMU0 25 +#define R8A73A4_CLK_TMU3 21 + /* MSTP2 */ #define R8A73A4_CLK_DMAC 18 #define R8A73A4_CLK_SCIFB3 17 -- 2.34.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2024-03-19 16:29 UTC|newest] Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top 2024-03-19 16:29 [PATCH 0/3] ARM: dts: renesas: Add more TMU support Geert Uytterhoeven 2024-03-19 16:29 ` Geert Uytterhoeven 2024-03-19 16:29 ` Geert Uytterhoeven [this message] 2024-03-19 16:29 ` [PATCH 1/3] ARM: dts: renesas: r8a73a4: Add TMU nodes Geert Uytterhoeven 2024-03-19 22:42 ` Niklas Söderlund 2024-03-19 22:42 ` Niklas Söderlund 2024-03-20 9:33 ` Krzysztof Kozlowski 2024-03-20 9:33 ` Krzysztof Kozlowski 2024-03-20 10:06 ` Geert Uytterhoeven 2024-03-20 10:06 ` Geert Uytterhoeven 2024-03-19 16:29 ` [PATCH 2/3] ARM: dts: renesas: rzg1: " Geert Uytterhoeven 2024-03-19 16:29 ` Geert Uytterhoeven 2024-03-19 16:29 ` [PATCH 3/3] ARM: dts: renesas: rcar-gen2: " Geert Uytterhoeven 2024-03-19 16:29 ` Geert Uytterhoeven 2024-03-19 22:55 ` Niklas Söderlund 2024-03-19 22:55 ` Niklas Söderlund 2024-03-20 7:31 ` Wolfram Sang 2024-03-20 7:31 ` Wolfram Sang 2024-03-20 7:08 ` [PATCH 0/3] ARM: dts: renesas: Add more TMU support Wolfram Sang 2024-03-20 7:08 ` Wolfram Sang 2024-03-20 8:03 ` Geert Uytterhoeven 2024-03-20 8:03 ` Geert Uytterhoeven 2024-03-20 8:34 ` Wolfram Sang 2024-03-20 8:34 ` Wolfram Sang 2024-03-20 10:09 ` Geert Uytterhoeven 2024-03-20 10:09 ` Geert Uytterhoeven 2024-03-21 10:17 ` Geert Uytterhoeven 2024-03-21 10:17 ` Geert Uytterhoeven
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1a60832f3ba37afb4a5791f4e5db4610ab31beb3.1710864964.git.geert+renesas@glider.be \ --to=geert+renesas@glider.be \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-renesas-soc@vger.kernel.org \ --cc=magnus.damm@gmail.com \ --cc=niklas.soderlund+renesas@ragnatech.se \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.