From: Tony Lindgren <tony@atomide.com> To: linux-arm-kernel@lists.infradead.org Cc: linux-omap@vger.kernel.org, Cory Maccarrone <darkstar6262@gmail.com> Subject: [PATCH 6/9] omap1: I2C mux and clocks for omap7xx Date: Tue, 08 Dec 2009 16:51:09 -0800 [thread overview] Message-ID: <20091209005109.5944.68875.stgit@localhost> (raw) In-Reply-To: <20091209004630.5944.40334.stgit@localhost> From: Cory Maccarrone <darkstar6262@gmail.com> This change adds MUX pin configuration and clocks for I2C support to OMAP 730 and 850-based devices. Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> --- arch/arm/mach-omap1/clock.c | 4 ++-- arch/arm/mach-omap1/i2c.c | 10 ++++++++-- arch/arm/mach-omap1/mux.c | 4 ++++ arch/arm/plat-omap/include/plat/mux.h | 4 ++++ 4 files changed, 18 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index 42cbe20..dc8ca91 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -132,9 +132,9 @@ static struct omap_clk omap_clks[] = { CLK("mmci-omap.1", "ick", &armper_ck.clk, CK_16XX), /* Virtual clocks */ CLK(NULL, "mpu", &virtual_ck_mpu, CK_16XX | CK_1510 | CK_310), - CLK("i2c_omap.1", "fck", &i2c_fck, CK_16XX | CK_1510 | CK_310), + CLK("i2c_omap.1", "fck", &i2c_fck, CK_16XX | CK_1510 | CK_310 | CK_7XX), CLK("i2c_omap.1", "ick", &i2c_ick, CK_16XX), - CLK("i2c_omap.1", "ick", &dummy_ck, CK_1510 | CK_310), + CLK("i2c_omap.1", "ick", &dummy_ck, CK_1510 | CK_310 | CK_7XX), CLK("omap_uwire", "fck", &armxor_ck.clk, CK_16XX | CK_1510 | CK_310), CLK("omap-mcbsp.1", "ick", &dspper_ck, CK_16XX), CLK("omap-mcbsp.1", "ick", &dummy_ck, CK_1510 | CK_310), diff --git a/arch/arm/mach-omap1/i2c.c b/arch/arm/mach-omap1/i2c.c index bc9d12b..1bf4735 100644 --- a/arch/arm/mach-omap1/i2c.c +++ b/arch/arm/mach-omap1/i2c.c @@ -21,13 +21,19 @@ #include <plat/i2c.h> #include <plat/mux.h> +#include <plat/cpu.h> int __init omap_register_i2c_bus(int bus_id, u32 clkrate, struct i2c_board_info const *info, unsigned len) { - omap_cfg_reg(I2C_SDA); - omap_cfg_reg(I2C_SCL); + if (cpu_is_omap7xx()) { + omap_cfg_reg(I2C_7XX_SDA); + omap_cfg_reg(I2C_7XX_SCL); + } else { + omap_cfg_reg(I2C_SDA); + omap_cfg_reg(I2C_SCL); + } return omap_plat_register_i2c_bus(bus_id, clkrate, info, len); } diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c index 5e183cd..07212cc 100644 --- a/arch/arm/mach-omap1/mux.c +++ b/arch/arm/mach-omap1/mux.c @@ -58,6 +58,10 @@ MUX_CFG_7XX("W19_7XX_USB_DCRST", 3, 7, 1, 6, 0, 0) MUX_CFG_7XX("MMC_7XX_CMD", 2, 9, 0, 8, 1, 0) MUX_CFG_7XX("MMC_7XX_CLK", 2, 13, 0, 12, 1, 0) MUX_CFG_7XX("MMC_7XX_DAT0", 2, 17, 0, 16, 1, 0) + +/* I2C interface */ +MUX_CFG_7XX("I2C_7XX_SCL", 5, 1, 0, 0, 1, 0) +MUX_CFG_7XX("I2C_7XX_SDA", 5, 5, 0, 0, 1, 0) }; #define OMAP7XX_PINS_SZ ARRAY_SIZE(omap7xx_pins) #else diff --git a/arch/arm/plat-omap/include/plat/mux.h b/arch/arm/plat-omap/include/plat/mux.h index 8ed5f25..8f069cc 100644 --- a/arch/arm/plat-omap/include/plat/mux.h +++ b/arch/arm/plat-omap/include/plat/mux.h @@ -179,6 +179,10 @@ enum omap7xx_index { MMC_7XX_CMD, MMC_7XX_CLK, MMC_7XX_DAT0, + + /* I2C */ + I2C_7XX_SCL, + I2C_7XX_SDA, }; enum omap1xxx_index {
WARNING: multiple messages have this Message-ID (diff)
From: tony@atomide.com (Tony Lindgren) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 6/9] omap1: I2C mux and clocks for omap7xx Date: Tue, 08 Dec 2009 16:51:09 -0800 [thread overview] Message-ID: <20091209005109.5944.68875.stgit@localhost> (raw) In-Reply-To: <20091209004630.5944.40334.stgit@localhost> From: Cory Maccarrone <darkstar6262@gmail.com> This change adds MUX pin configuration and clocks for I2C support to OMAP 730 and 850-based devices. Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> --- arch/arm/mach-omap1/clock.c | 4 ++-- arch/arm/mach-omap1/i2c.c | 10 ++++++++-- arch/arm/mach-omap1/mux.c | 4 ++++ arch/arm/plat-omap/include/plat/mux.h | 4 ++++ 4 files changed, 18 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index 42cbe20..dc8ca91 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -132,9 +132,9 @@ static struct omap_clk omap_clks[] = { CLK("mmci-omap.1", "ick", &armper_ck.clk, CK_16XX), /* Virtual clocks */ CLK(NULL, "mpu", &virtual_ck_mpu, CK_16XX | CK_1510 | CK_310), - CLK("i2c_omap.1", "fck", &i2c_fck, CK_16XX | CK_1510 | CK_310), + CLK("i2c_omap.1", "fck", &i2c_fck, CK_16XX | CK_1510 | CK_310 | CK_7XX), CLK("i2c_omap.1", "ick", &i2c_ick, CK_16XX), - CLK("i2c_omap.1", "ick", &dummy_ck, CK_1510 | CK_310), + CLK("i2c_omap.1", "ick", &dummy_ck, CK_1510 | CK_310 | CK_7XX), CLK("omap_uwire", "fck", &armxor_ck.clk, CK_16XX | CK_1510 | CK_310), CLK("omap-mcbsp.1", "ick", &dspper_ck, CK_16XX), CLK("omap-mcbsp.1", "ick", &dummy_ck, CK_1510 | CK_310), diff --git a/arch/arm/mach-omap1/i2c.c b/arch/arm/mach-omap1/i2c.c index bc9d12b..1bf4735 100644 --- a/arch/arm/mach-omap1/i2c.c +++ b/arch/arm/mach-omap1/i2c.c @@ -21,13 +21,19 @@ #include <plat/i2c.h> #include <plat/mux.h> +#include <plat/cpu.h> int __init omap_register_i2c_bus(int bus_id, u32 clkrate, struct i2c_board_info const *info, unsigned len) { - omap_cfg_reg(I2C_SDA); - omap_cfg_reg(I2C_SCL); + if (cpu_is_omap7xx()) { + omap_cfg_reg(I2C_7XX_SDA); + omap_cfg_reg(I2C_7XX_SCL); + } else { + omap_cfg_reg(I2C_SDA); + omap_cfg_reg(I2C_SCL); + } return omap_plat_register_i2c_bus(bus_id, clkrate, info, len); } diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c index 5e183cd..07212cc 100644 --- a/arch/arm/mach-omap1/mux.c +++ b/arch/arm/mach-omap1/mux.c @@ -58,6 +58,10 @@ MUX_CFG_7XX("W19_7XX_USB_DCRST", 3, 7, 1, 6, 0, 0) MUX_CFG_7XX("MMC_7XX_CMD", 2, 9, 0, 8, 1, 0) MUX_CFG_7XX("MMC_7XX_CLK", 2, 13, 0, 12, 1, 0) MUX_CFG_7XX("MMC_7XX_DAT0", 2, 17, 0, 16, 1, 0) + +/* I2C interface */ +MUX_CFG_7XX("I2C_7XX_SCL", 5, 1, 0, 0, 1, 0) +MUX_CFG_7XX("I2C_7XX_SDA", 5, 5, 0, 0, 1, 0) }; #define OMAP7XX_PINS_SZ ARRAY_SIZE(omap7xx_pins) #else diff --git a/arch/arm/plat-omap/include/plat/mux.h b/arch/arm/plat-omap/include/plat/mux.h index 8ed5f25..8f069cc 100644 --- a/arch/arm/plat-omap/include/plat/mux.h +++ b/arch/arm/plat-omap/include/plat/mux.h @@ -179,6 +179,10 @@ enum omap7xx_index { MMC_7XX_CMD, MMC_7XX_CLK, MMC_7XX_DAT0, + + /* I2C */ + I2C_7XX_SCL, + I2C_7XX_SDA, }; enum omap1xxx_index {
next prev parent reply other threads:[~2009-12-09 0:51 UTC|newest] Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top 2009-12-09 0:49 [PATCH 0/9] Few more omap patches for v2.6.33 merge window Tony Lindgren 2009-12-09 0:49 ` Tony Lindgren 2009-12-09 0:49 ` [PATCH 1/9] omap: use smc91x_platdata to setup smc91x Tony Lindgren 2009-12-09 0:49 ` Tony Lindgren 2009-12-09 2:13 ` Tony Lindgren 2009-12-09 2:13 ` Tony Lindgren 2009-12-09 0:50 ` [PATCH 2/9] smc91x: remove OMAP specific bits Tony Lindgren 2009-12-09 0:50 ` Tony Lindgren 2009-12-09 0:50 ` [PATCH 3/9] omap1: Use gen_nand Tony Lindgren 2009-12-09 0:50 ` Tony Lindgren 2009-12-09 0:50 ` [PATCH 4/9] omap1: DMA: move LCD related code from plat-omap to mach-omap1 Tony Lindgren 2009-12-09 0:50 ` Tony Lindgren 2009-12-09 0:50 ` [PATCH 5/9] omap1: Add omap7xx USB support Tony Lindgren 2009-12-09 0:50 ` Tony Lindgren 2009-12-09 0:51 ` Tony Lindgren [this message] 2009-12-09 0:51 ` [PATCH 6/9] omap1: I2C mux and clocks for omap7xx Tony Lindgren 2009-12-09 0:51 ` [PATCH 7/9] omap3: Board file of Always Innovating OMAP3-based Touch Book Tony Lindgren 2009-12-09 0:51 ` Tony Lindgren 2009-12-09 0:51 ` [PATCH 8/9] omap3: Defconfig " Tony Lindgren 2009-12-09 0:51 ` Tony Lindgren 2009-12-09 0:51 ` [PATCH 9/9] omap3: pandora: board file updates for .33 Tony Lindgren 2009-12-09 0:51 ` Tony Lindgren
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20091209005109.5944.68875.stgit@localhost \ --to=tony@atomide.com \ --cc=darkstar6262@gmail.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-omap@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.