All of lore.kernel.org
 help / color / mirror / Atom feed
From: s.hauer@pengutronix.de (Sascha Hauer)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH RFC] i.MX51 Framebuffer support
Date: Wed, 15 Dec 2010 12:24:43 +0100	[thread overview]
Message-ID: <20101215112443.GC6017@pengutronix.de> (raw)
In-Reply-To: <4D088BEE.3030709@bitbox.co.uk>

On Wed, Dec 15, 2010 at 09:35:42AM +0000, Peter Horton wrote:
> On 09/12/2010 13:47, Sascha Hauer wrote:
>>
>> The following series adds i.MX51 framebuffer support based on the IPUv3. It
>> is not perfect but I decided it is good enough to open it for a wider audience
>> and collect first reviews. I tested this on a babbage board using both outputs
>> (VGA/DVI) with different resolutions up to 1680x1050 and different colour depths.
>> I also tested it on one custom board using a fixed display setting.
>>
>
> Good stuff, almost works here :)
>
> Custom board with an HDMI bridge hooked to DI0.
>
> About 50% of power ups fail to show a display because the DE signal is  
> bogus. It appears to be correct for the active window but remains active  
> for the vertical blanking period. If the DE signal is correct we get a  
> good display. I've tried investigating but the IPU section of the manual  
> is unfathomable (and that's just the section on the waveform generator).

I just learned a new word. 'unfathomable' really is the right word for
this ;)
I think it's nearly impossible to write a driver based only on the
datasheet.

>
> Resizing the display to a larger size sometimes shows a square of solid  
> colour on the display, hardware cursor perhaps ?

I don't know, but I can't imagine the hardware cursor gets activated
accidently.

>
> Every now and then changing the video mode causes the kernel to hang  
> hard. Unfortunately this is not very reproduceable.

I'll try to reproduce it here.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

      reply	other threads:[~2010-12-15 11:24 UTC|newest]

Thread overview: 108+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-12-09 13:47 [PATCH RFC] i.MX51 Framebuffer support Sascha Hauer
2010-12-09 13:47 ` Sascha Hauer
2010-12-09 13:47 ` Sascha Hauer
2010-12-09 13:47 ` [PATCH 1/9] ARM i.MX51: Add ipu clock support Sascha Hauer
2010-12-09 13:47   ` Sascha Hauer
2010-12-09 13:47   ` Sascha Hauer
2010-12-15 15:40   ` Arnd Bergmann
2010-12-15 15:40     ` Arnd Bergmann
2010-12-15 15:40     ` Arnd Bergmann
2010-12-15 16:34     ` Russell King - ARM Linux
2010-12-15 16:34       ` Russell King - ARM Linux
2010-12-15 16:34       ` Russell King - ARM Linux
2010-12-15 16:49       ` Arnd Bergmann
2010-12-15 16:49         ` Arnd Bergmann
2010-12-15 16:49         ` Arnd Bergmann
2010-12-15 17:12         ` Russell King - ARM Linux
2010-12-15 17:12           ` Russell King - ARM Linux
2010-12-15 17:12           ` Russell King - ARM Linux
2010-12-09 13:47 ` [PATCH 2/9] ARM i.MX51: rename IPU irqs Sascha Hauer
2010-12-09 13:47   ` Sascha Hauer
2010-12-09 13:47   ` Sascha Hauer
2010-12-09 14:34   ` Uwe Kleine-König
2010-12-09 14:34     ` Uwe Kleine-König
2010-12-09 14:34     ` 
2010-12-09 13:47 ` [PATCH 3/9] Add a mfd IPUv3 driver Sascha Hauer
2010-12-09 13:47   ` Sascha Hauer
2010-12-12  5:21   ` Liu Ying
2010-12-12  5:21     ` Liu Ying
2010-12-13 11:23     ` Sascha Hauer
2010-12-13 11:23       ` Sascha Hauer
2010-12-13 11:23       ` Sascha Hauer
2010-12-14  4:05       ` Liu Ying
2010-12-14  4:05         ` Liu Ying
2010-12-14  4:05         ` Liu Ying
2010-12-14  8:40         ` Sascha Hauer
2010-12-14  8:40           ` Sascha Hauer
2010-12-14  8:40           ` Sascha Hauer
2010-12-14 13:13           ` Liu Ying
2010-12-14 13:13             ` Liu Ying
2010-12-14 13:13             ` Liu Ying
2010-12-09 13:47 ` [PATCH 4/9] fb: export fb mode db table Sascha Hauer
2010-12-09 13:47   ` Sascha Hauer
2010-12-09 13:47   ` Sascha Hauer
2011-01-06  7:26   ` Paul Mundt
2011-01-06  7:26     ` Paul Mundt
2011-01-06  7:26     ` Paul Mundt
2011-01-06 10:04     ` Sascha Hauer
2011-01-06 10:04       ` Sascha Hauer
2011-01-06 10:04       ` Sascha Hauer
2010-12-09 13:47 ` [PATCH 5/9] Add i.MX5 framebuffer driver Sascha Hauer
2010-12-09 13:47   ` Sascha Hauer
2010-12-09 13:47   ` Sascha Hauer
2010-12-12  6:13   ` Liu Ying
2010-12-12  6:13     ` Liu Ying
2010-12-12  6:13     ` Liu Ying
2010-12-13  7:23     ` Lothar Waßmann
2010-12-13  7:23       ` Lothar Waßmann
2010-12-13  7:23       ` Lothar Waßmann
2010-12-13 11:35       ` Liu Ying
2010-12-13 11:35         ` Liu Ying
2010-12-13 11:35         ` Liu Ying
2010-12-13 11:38     ` Sascha Hauer
2010-12-13 11:38       ` Sascha Hauer
2010-12-13 11:38       ` Sascha Hauer
2010-12-14  6:40       ` Liu Ying
2010-12-14  6:40         ` Liu Ying
2010-12-14  6:40         ` Liu Ying
2010-12-14  8:45         ` Sascha Hauer
2010-12-14  8:45           ` Sascha Hauer
2010-12-14  8:45           ` Sascha Hauer
2010-12-14 13:23           ` Liu Ying
2010-12-14 13:23             ` Liu Ying
2010-12-14 13:23             ` Liu Ying
2010-12-15 11:17             ` Sascha Hauer
2010-12-15 11:17               ` Sascha Hauer
2010-12-15 11:17               ` Sascha Hauer
2010-12-09 13:47 ` [PATCH 6/9] ARM i.MX51: Add IPU device support Sascha Hauer
2010-12-09 13:47   ` Sascha Hauer
2010-12-09 13:47   ` Sascha Hauer
2010-12-15 15:49   ` Arnd Bergmann
2010-12-15 15:49     ` Arnd Bergmann
2010-12-15 15:49     ` Arnd Bergmann
2010-12-15 16:26     ` Arnaud Patard
2010-12-15 16:26       ` Arnaud Patard (Rtp)
2010-12-15 16:26       ` Arnaud Patard
2010-12-15 16:29       ` Arnd Bergmann
2010-12-15 16:29         ` Arnd Bergmann
2010-12-15 16:29         ` Arnd Bergmann
2010-12-09 13:47 ` [PATCH 7/9] ARM i.MX5: Allow to increase max zone order Sascha Hauer
2010-12-09 13:47   ` Sascha Hauer
2010-12-09 13:47   ` Sascha Hauer
2010-12-09 13:47 ` [PATCH 8/9] ARM i.MX5: increase dma consistent size for IPU support Sascha Hauer
2010-12-09 13:47   ` Sascha Hauer
2010-12-09 13:47   ` Sascha Hauer
2010-12-09 13:47 ` [PATCH 9/9] ARM i.MX51 babbage: Add framebuffer support Sascha Hauer
2010-12-09 13:47   ` Sascha Hauer
2010-12-09 13:47   ` Sascha Hauer
2010-12-12  1:37   ` Liu Ying
2010-12-12  1:37     ` Liu Ying
2010-12-12  1:37     ` Liu Ying
2010-12-13 11:43     ` Sascha Hauer
2010-12-13 11:43       ` Sascha Hauer
2010-12-13 11:43       ` Sascha Hauer
2010-12-14  6:47       ` Liu Ying
2010-12-14  6:47         ` Liu Ying
2010-12-14  6:47         ` Liu Ying
2010-12-15  9:35 ` [PATCH RFC] i.MX51 Framebuffer support Peter Horton
2010-12-15 11:24   ` Sascha Hauer [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20101215112443.GC6017@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.