From: linux@arm.linux.org.uk (Russell King - ARM Linux)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] arm/imx: use Kconfig choice for low-level debug UART selection
Date: Tue, 22 Nov 2011 20:24:25 +0000 [thread overview]
Message-ID: <20111122202425.GD9581@n2100.arm.linux.org.uk> (raw)
In-Reply-To: <20111122164707.GJ6624@sirena.org.uk>
On Tue, Nov 22, 2011 at 04:47:07PM +0000, Mark Brown wrote:
> On Tue, Nov 22, 2011 at 05:38:12PM +0100, Uwe Kleine-K?nig wrote:
> > On Tue, Nov 22, 2011 at 03:48:38PM +0000, Russell King - ARM Linux wrote:
>
> > > > Ah, I see the problem. It's more subtile than just failure to build: it
> > > > autoselects DEBUG_ICEDCC then.
>
> > > At this point, I think the right answer is to remove the option in
> > > linux-next, and tell anyone who complains that they need to convert
> > > their platform properly. (We're going to need them converted in this
> > > way anyway for the single zImage project.)
>
> > I agree.
>
> It'd be nice if things could be arranged so that the build breaks rather
> than selecting ICEDCC on unconverted platforms - when you run into the
> problem it's not that easy to diagnose.
Well, we could leave the choice as is, and make the NONE option cause a
#error.
next prev parent reply other threads:[~2011-11-22 20:24 UTC|newest]
Thread overview: 86+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-16 21:41 [PATCH 1/3] ARM: debug: use kconfig choice for selecting DEBUG_LL UART Will Deacon
2011-08-16 21:41 ` [PATCH 2/3] ARM: plat-samsung: use Kconfig choice for debug UART selection Will Deacon
2011-10-10 11:56 ` Thomas Abraham
2011-10-10 11:56 ` Thomas Abraham
2011-10-10 12:23 ` Will Deacon
2011-10-10 12:23 ` Will Deacon
2011-10-10 12:35 ` Thomas Abraham
2011-10-10 12:35 ` Thomas Abraham
2011-10-10 13:34 ` Will Deacon
2011-10-10 13:34 ` Will Deacon
2011-10-10 13:38 ` Thomas Abraham
2011-10-10 13:38 ` Thomas Abraham
2011-08-16 21:41 ` [PATCH 3/3] ARM: realview: " Will Deacon
2011-08-18 4:06 ` [PATCH 1/3] ARM: debug: use kconfig choice for selecting DEBUG_LL UART Nicolas Pitre
2011-08-18 9:33 ` Will Deacon
2011-08-18 16:11 ` Shawn Guo
2011-08-18 16:07 ` Will Deacon
2011-08-19 4:59 ` Shawn Guo
2011-08-19 11:08 ` Will Deacon
2011-08-19 11:37 ` Shawn Guo
2011-08-19 12:32 ` Will Deacon
2011-08-19 15:49 ` Nicolas Pitre
2011-08-21 9:14 ` Russell King - ARM Linux
2011-08-21 17:35 ` Nicolas Pitre
2011-08-21 18:26 ` Russell King - ARM Linux
2011-08-21 19:02 ` Nicolas Pitre
2011-08-21 19:18 ` Russell King - ARM Linux
2011-08-21 19:22 ` Russell King - ARM Linux
2011-08-21 20:07 ` Nicolas Pitre
2011-08-21 20:54 ` Russell King - ARM Linux
2011-08-21 21:00 ` Nicolas Pitre
2011-08-21 21:29 ` Russell King - ARM Linux
2011-08-21 22:00 ` Nicolas Pitre
2011-08-21 19:53 ` Nicolas Pitre
2011-09-06 9:28 ` Tony Lindgren
2011-09-06 9:37 ` Russell King - ARM Linux
2011-09-06 10:27 ` Tony Lindgren
2011-09-06 10:52 ` Russell King - ARM Linux
2011-09-06 11:01 ` Tony Lindgren
2011-09-06 11:07 ` Russell King - ARM Linux
2011-09-06 19:45 ` Uwe Kleine-König
2011-08-19 14:54 ` Nicolas Pitre
2011-08-19 4:56 ` [PATCH] arm/imx: use Kconfig choice for low-level debug UART selection Shawn Guo
2011-08-19 6:35 ` Sascha Hauer
2011-08-19 7:00 ` Shawn Guo
2011-08-19 11:09 ` Will Deacon
2011-08-19 11:39 ` Sascha Hauer
2011-08-19 12:35 ` Will Deacon
2011-08-19 17:15 ` Sascha Hauer
2011-08-21 9:18 ` Russell King - ARM Linux
2011-08-21 11:25 ` Will Deacon
2011-08-21 17:59 ` Nicolas Pitre
2011-08-21 18:17 ` Russell King - ARM Linux
2011-08-21 18:28 ` Nicolas Pitre
2011-08-21 18:33 ` Russell King - ARM Linux
2011-11-22 8:58 ` Uwe Kleine-König
2011-11-22 11:50 ` Will Deacon
2011-11-22 13:02 ` Uwe Kleine-König
2011-11-22 13:20 ` Will Deacon
2011-11-22 13:30 ` Uwe Kleine-König
2011-11-22 15:48 ` Russell King - ARM Linux
2011-11-22 16:38 ` Uwe Kleine-König
2011-11-22 16:47 ` Mark Brown
2011-11-22 17:13 ` Uwe Kleine-König
2011-11-22 20:24 ` Russell King - ARM Linux [this message]
2011-11-22 21:19 ` Arnd Bergmann
2011-11-22 23:00 ` Mark Brown
2011-11-23 10:57 ` Will Deacon
2011-09-15 17:34 ` [PATCH 1/3] ARM: debug: use kconfig choice for selecting DEBUG_LL UART Stephen Boyd
2011-09-16 11:41 ` Will Deacon
2011-09-19 18:01 ` [PATCH 1/2] ARM: debug: Add CLSP711X_UART1 config choice Stephen Boyd
2011-09-19 18:01 ` Stephen Boyd
2011-09-19 18:01 ` [PATCH 2/2] ARM: debug: Move DEBUG_ICEDCC into the DEBUG_LL choice Stephen Boyd
2011-09-19 18:01 ` Stephen Boyd
2011-09-19 21:25 ` [PATCH 1/2] ARM: debug: Add CLSP711X_UART1 config choice Will Deacon
2011-09-19 21:25 ` Will Deacon
2011-09-19 22:12 ` Stephen Boyd
2011-09-19 22:12 ` Stephen Boyd
2011-09-19 22:41 ` Russell King - ARM Linux
2011-09-19 22:41 ` Russell King - ARM Linux
2011-09-19 22:55 ` Stephen Boyd
2011-09-19 22:55 ` Stephen Boyd
2011-11-22 20:42 ` Russell King - ARM Linux
2011-11-22 20:42 ` Russell King - ARM Linux
2011-09-19 23:14 ` Will Deacon
2011-09-19 23:14 ` Will Deacon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20111122202425.GD9581@n2100.arm.linux.org.uk \
--to=linux@arm.linux.org.uk \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.