From: Anton Vorontsov <anton.vorontsov@linaro.org>
To: Andrew Morton <akpm@linux-foundation.org>,
Russell King <linux@arm.linux.org.uk>,
Jason Wessel <jason.wessel@windriver.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Alan Cox <alan@linux.intel.com>
Cc: "Arve Hjønnevåg" <arve@android.com>,
"Colin Cross" <ccross@android.com>,
"Brian Swetland" <swetland@google.com>,
"John Stultz" <john.stultz@linaro.org>,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linaro-kernel@lists.linaro.org, patches@linaro.org,
kernel-team@android.com, kgdb-bugreport@lists.sourceforge.net,
linux-serial@vger.kernel.org
Subject: [PATCH 07/14] tty/serial/amba-pl011: Implement poll_init callback
Date: Sun, 9 Sep 2012 21:13:46 -0700 [thread overview]
Message-ID: <20120910041346.GG29537@lizard> (raw)
In-Reply-To: <20120910040802.GA1261@lizard>
The callback is used to initialize the hardware, nothing else should be
done, i.e. we should not request interrupts (but we can and do unmask
some of them, as they might be useful for NMI entry).
As a side-effect, the patch also fixes a division by zero[1] when booting
with kgdboc options specified (e.g. kgdboc=ttyAMA0,115200n8). The issue
happens because serial core calls set_termios callback, but the driver
doesn't know clock frequency, and thus cannot calculate proper baud rate
values.
[1]
WARNING: at drivers/tty/serial/serial_core.c:400 uart_get_baud_rate+0xe8/0x14c()
Modules linked in:
[<c0018e50>] (unwind_backtrace+0x0/0xf0) from [<c0020ae8>] (warn_slowpath_common+0x4c/0x64)
[<c0020ae8>] (warn_slowpath_common+0x4c/0x64) from [<c0020b1c>] (warn_slowpath_null+0x1c/0x24)
[<c0020b1c>] (warn_slowpath_null+0x1c/0x24) from [<c0185ed8>] (uart_get_baud_rate+0xe8/0x14c)
[<c0185ed8>] (uart_get_baud_rate+0xe8/0x14c) from [<c0187078>] (pl011_set_termios+0x48/0x278)
[<c0187078>] (pl011_set_termios+0x48/0x278) from [<c01850b0>] (uart_set_options+0xe8/0x114)
[<c01850b0>] (uart_set_options+0xe8/0x114) from [<c0185de4>] (uart_poll_init+0xd4/0xe0)
[<c0185de4>] (uart_poll_init+0xd4/0xe0) from [<c016da8c>] (tty_find_polling_driver+0x100/0x17c)
[<c016da8c>] (tty_find_polling_driver+0x100/0x17c) from [<c0188538>] (configure_kgdboc+0xc8/0x1b8)
[<c0188538>] (configure_kgdboc+0xc8/0x1b8) from [<c00088a4>] (do_one_initcall+0x30/0x168)
[<c00088a4>] (do_one_initcall+0x30/0x168) from [<c033784c>] (do_basic_setup+0x94/0xc8)
[<c033784c>] (do_basic_setup+0x94/0xc8) from [<c03378e0>] (kernel_init+0x60/0xf4)
[<c03378e0>] (kernel_init+0x60/0xf4) from [<c00144a0>] (kernel_thread_exit+0x0/0x8)
---[ end trace 7d41c9186f342c40 ]---
Division by zero in kernel.
[<c0018e50>] (unwind_backtrace+0x0/0xf0) from [<c014546c>] (Ldiv0+0x8/0x10)
[<c014546c>] (Ldiv0+0x8/0x10) from [<c0187098>] (pl011_set_termios+0x68/0x278)
[<c0187098>] (pl011_set_termios+0x68/0x278) from [<c01850b0>] (uart_set_options+0xe8/0x114)
[<c01850b0>] (uart_set_options+0xe8/0x114) from [<c0185de4>] (uart_poll_init+0xd4/0xe0)
[<c0185de4>] (uart_poll_init+0xd4/0xe0) from [<c016da8c>] (tty_find_polling_driver+0x100/0x17c)
[<c016da8c>] (tty_find_polling_driver+0x100/0x17c) from [<c0188538>] (configure_kgdboc+0xc8/0x1b8)
[<c0188538>] (configure_kgdboc+0xc8/0x1b8) from [<c00088a4>] (do_one_initcall+0x30/0x168)
[<c00088a4>] (do_one_initcall+0x30/0x168) from [<c033784c>] (do_basic_setup+0x94/0xc8)
[<c033784c>] (do_basic_setup+0x94/0xc8) from [<c03378e0>] (kernel_init+0x60/0xf4)
[<c03378e0>] (kernel_init+0x60/0xf4) from [<c00144a0>] (kernel_thread_exit+0x0/0x8)
Division by zero in kernel.
[<c0018e50>] (unwind_backtrace+0x0/0xf0) from [<c014546c>] (Ldiv0+0x8/0x10)
[<c014546c>] (Ldiv0+0x8/0x10) from [<c0183a98>] (uart_update_timeout+0x4c/0x5c)
[<c0183a98>] (uart_update_timeout+0x4c/0x5c) from [<c01870f8>] (pl011_set_termios+0xc8/0x278)
[<c01870f8>] (pl011_set_termios+0xc8/0x278) from [<c01850b0>] (uart_set_options+0xe8/0x114)
[<c01850b0>] (uart_set_options+0xe8/0x114) from [<c0185de4>] (uart_poll_init+0xd4/0xe0)
[<c0185de4>] (uart_poll_init+0xd4/0xe0) from [<c016da8c>] (tty_find_polling_driver+0x100/0x17c)
[<c016da8c>] (tty_find_polling_driver+0x100/0x17c) from [<c0188538>] (configure_kgdboc+0xc8/0x1b8)
[<c0188538>] (configure_kgdboc+0xc8/0x1b8) from [<c00088a4>] (do_one_initcall+0x30/0x168)
[<c00088a4>] (do_one_initcall+0x30/0x168) from [<c033784c>] (do_basic_setup+0x94/0xc8)
[<c033784c>] (do_basic_setup+0x94/0xc8) from [<c03378e0>] (kernel_init+0x60/0xf4)
[<c03378e0>] (kernel_init+0x60/0xf4) from [<c00144a0>] (kernel_thread_exit+0x0/0x8)
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
---
drivers/tty/serial/amba-pl011.c | 44 ++++++++++++++++++++++++++++++-----------
1 file changed, 33 insertions(+), 11 deletions(-)
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 3322023..88e2df2 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -1310,10 +1310,9 @@ static void pl011_put_poll_char(struct uart_port *port,
#endif /* CONFIG_CONSOLE_POLL */
-static int pl011_startup(struct uart_port *port)
+static int pl011_hwinit(struct uart_port *port)
{
struct uart_amba_port *uap = (struct uart_amba_port *)port;
- unsigned int cr;
int retval;
/* Optionaly enable pins to be muxed in and configured */
@@ -1338,6 +1337,37 @@ static int pl011_startup(struct uart_port *port)
UART011_RTIS | UART011_RXIS, uap->port.membase + UART011_ICR);
/*
+ * Save interrupts enable mask, and enable RX interrupts in case if
+ * the interrupt is used for NMI entry.
+ */
+ uap->im = readw(uap->port.membase + UART011_IMSC);
+ writew(UART011_RTIM | UART011_RXIM, uap->port.membase + UART011_IMSC);
+
+ if (uap->port.dev->platform_data) {
+ struct amba_pl011_data *plat;
+
+ plat = uap->port.dev->platform_data;
+ if (plat->init)
+ plat->init();
+ }
+ return 0;
+ out:
+ return retval;
+}
+
+static int pl011_startup(struct uart_port *port)
+{
+ struct uart_amba_port *uap = (struct uart_amba_port *)port;
+ unsigned int cr;
+ int retval;
+
+ retval = pl011_hwinit(port);
+ if (retval)
+ goto clk_dis;
+
+ writew(uap->im, uap->port.membase + UART011_IMSC);
+
+ /*
* Allocate the IRQ
*/
retval = request_irq(uap->port.irq, pl011_int, 0, "uart-pl011", uap);
@@ -1396,19 +1426,10 @@ static int pl011_startup(struct uart_port *port)
writew(uap->im, uap->port.membase + UART011_IMSC);
spin_unlock_irq(&uap->port.lock);
- if (uap->port.dev->platform_data) {
- struct amba_pl011_data *plat;
-
- plat = uap->port.dev->platform_data;
- if (plat->init)
- plat->init();
- }
-
return 0;
clk_dis:
clk_disable_unprepare(uap->clk);
- out:
return retval;
}
@@ -1689,6 +1710,7 @@ static struct uart_ops amba_pl011_pops = {
.config_port = pl011_config_port,
.verify_port = pl011_verify_port,
#ifdef CONFIG_CONSOLE_POLL
+ .poll_init = pl011_hwinit,
.poll_get_char = pl011_get_poll_char,
.poll_put_char = pl011_put_poll_char,
#endif
--
1.7.11.5
WARNING: multiple messages have this Message-ID (diff)
From: anton.vorontsov@linaro.org (Anton Vorontsov)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 07/14] tty/serial/amba-pl011: Implement poll_init callback
Date: Sun, 9 Sep 2012 21:13:46 -0700 [thread overview]
Message-ID: <20120910041346.GG29537@lizard> (raw)
In-Reply-To: <20120910040802.GA1261@lizard>
The callback is used to initialize the hardware, nothing else should be
done, i.e. we should not request interrupts (but we can and do unmask
some of them, as they might be useful for NMI entry).
As a side-effect, the patch also fixes a division by zero[1] when booting
with kgdboc options specified (e.g. kgdboc=ttyAMA0,115200n8). The issue
happens because serial core calls set_termios callback, but the driver
doesn't know clock frequency, and thus cannot calculate proper baud rate
values.
[1]
WARNING: at drivers/tty/serial/serial_core.c:400 uart_get_baud_rate+0xe8/0x14c()
Modules linked in:
[<c0018e50>] (unwind_backtrace+0x0/0xf0) from [<c0020ae8>] (warn_slowpath_common+0x4c/0x64)
[<c0020ae8>] (warn_slowpath_common+0x4c/0x64) from [<c0020b1c>] (warn_slowpath_null+0x1c/0x24)
[<c0020b1c>] (warn_slowpath_null+0x1c/0x24) from [<c0185ed8>] (uart_get_baud_rate+0xe8/0x14c)
[<c0185ed8>] (uart_get_baud_rate+0xe8/0x14c) from [<c0187078>] (pl011_set_termios+0x48/0x278)
[<c0187078>] (pl011_set_termios+0x48/0x278) from [<c01850b0>] (uart_set_options+0xe8/0x114)
[<c01850b0>] (uart_set_options+0xe8/0x114) from [<c0185de4>] (uart_poll_init+0xd4/0xe0)
[<c0185de4>] (uart_poll_init+0xd4/0xe0) from [<c016da8c>] (tty_find_polling_driver+0x100/0x17c)
[<c016da8c>] (tty_find_polling_driver+0x100/0x17c) from [<c0188538>] (configure_kgdboc+0xc8/0x1b8)
[<c0188538>] (configure_kgdboc+0xc8/0x1b8) from [<c00088a4>] (do_one_initcall+0x30/0x168)
[<c00088a4>] (do_one_initcall+0x30/0x168) from [<c033784c>] (do_basic_setup+0x94/0xc8)
[<c033784c>] (do_basic_setup+0x94/0xc8) from [<c03378e0>] (kernel_init+0x60/0xf4)
[<c03378e0>] (kernel_init+0x60/0xf4) from [<c00144a0>] (kernel_thread_exit+0x0/0x8)
---[ end trace 7d41c9186f342c40 ]---
Division by zero in kernel.
[<c0018e50>] (unwind_backtrace+0x0/0xf0) from [<c014546c>] (Ldiv0+0x8/0x10)
[<c014546c>] (Ldiv0+0x8/0x10) from [<c0187098>] (pl011_set_termios+0x68/0x278)
[<c0187098>] (pl011_set_termios+0x68/0x278) from [<c01850b0>] (uart_set_options+0xe8/0x114)
[<c01850b0>] (uart_set_options+0xe8/0x114) from [<c0185de4>] (uart_poll_init+0xd4/0xe0)
[<c0185de4>] (uart_poll_init+0xd4/0xe0) from [<c016da8c>] (tty_find_polling_driver+0x100/0x17c)
[<c016da8c>] (tty_find_polling_driver+0x100/0x17c) from [<c0188538>] (configure_kgdboc+0xc8/0x1b8)
[<c0188538>] (configure_kgdboc+0xc8/0x1b8) from [<c00088a4>] (do_one_initcall+0x30/0x168)
[<c00088a4>] (do_one_initcall+0x30/0x168) from [<c033784c>] (do_basic_setup+0x94/0xc8)
[<c033784c>] (do_basic_setup+0x94/0xc8) from [<c03378e0>] (kernel_init+0x60/0xf4)
[<c03378e0>] (kernel_init+0x60/0xf4) from [<c00144a0>] (kernel_thread_exit+0x0/0x8)
Division by zero in kernel.
[<c0018e50>] (unwind_backtrace+0x0/0xf0) from [<c014546c>] (Ldiv0+0x8/0x10)
[<c014546c>] (Ldiv0+0x8/0x10) from [<c0183a98>] (uart_update_timeout+0x4c/0x5c)
[<c0183a98>] (uart_update_timeout+0x4c/0x5c) from [<c01870f8>] (pl011_set_termios+0xc8/0x278)
[<c01870f8>] (pl011_set_termios+0xc8/0x278) from [<c01850b0>] (uart_set_options+0xe8/0x114)
[<c01850b0>] (uart_set_options+0xe8/0x114) from [<c0185de4>] (uart_poll_init+0xd4/0xe0)
[<c0185de4>] (uart_poll_init+0xd4/0xe0) from [<c016da8c>] (tty_find_polling_driver+0x100/0x17c)
[<c016da8c>] (tty_find_polling_driver+0x100/0x17c) from [<c0188538>] (configure_kgdboc+0xc8/0x1b8)
[<c0188538>] (configure_kgdboc+0xc8/0x1b8) from [<c00088a4>] (do_one_initcall+0x30/0x168)
[<c00088a4>] (do_one_initcall+0x30/0x168) from [<c033784c>] (do_basic_setup+0x94/0xc8)
[<c033784c>] (do_basic_setup+0x94/0xc8) from [<c03378e0>] (kernel_init+0x60/0xf4)
[<c03378e0>] (kernel_init+0x60/0xf4) from [<c00144a0>] (kernel_thread_exit+0x0/0x8)
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
---
drivers/tty/serial/amba-pl011.c | 44 ++++++++++++++++++++++++++++++-----------
1 file changed, 33 insertions(+), 11 deletions(-)
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 3322023..88e2df2 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -1310,10 +1310,9 @@ static void pl011_put_poll_char(struct uart_port *port,
#endif /* CONFIG_CONSOLE_POLL */
-static int pl011_startup(struct uart_port *port)
+static int pl011_hwinit(struct uart_port *port)
{
struct uart_amba_port *uap = (struct uart_amba_port *)port;
- unsigned int cr;
int retval;
/* Optionaly enable pins to be muxed in and configured */
@@ -1338,6 +1337,37 @@ static int pl011_startup(struct uart_port *port)
UART011_RTIS | UART011_RXIS, uap->port.membase + UART011_ICR);
/*
+ * Save interrupts enable mask, and enable RX interrupts in case if
+ * the interrupt is used for NMI entry.
+ */
+ uap->im = readw(uap->port.membase + UART011_IMSC);
+ writew(UART011_RTIM | UART011_RXIM, uap->port.membase + UART011_IMSC);
+
+ if (uap->port.dev->platform_data) {
+ struct amba_pl011_data *plat;
+
+ plat = uap->port.dev->platform_data;
+ if (plat->init)
+ plat->init();
+ }
+ return 0;
+ out:
+ return retval;
+}
+
+static int pl011_startup(struct uart_port *port)
+{
+ struct uart_amba_port *uap = (struct uart_amba_port *)port;
+ unsigned int cr;
+ int retval;
+
+ retval = pl011_hwinit(port);
+ if (retval)
+ goto clk_dis;
+
+ writew(uap->im, uap->port.membase + UART011_IMSC);
+
+ /*
* Allocate the IRQ
*/
retval = request_irq(uap->port.irq, pl011_int, 0, "uart-pl011", uap);
@@ -1396,19 +1426,10 @@ static int pl011_startup(struct uart_port *port)
writew(uap->im, uap->port.membase + UART011_IMSC);
spin_unlock_irq(&uap->port.lock);
- if (uap->port.dev->platform_data) {
- struct amba_pl011_data *plat;
-
- plat = uap->port.dev->platform_data;
- if (plat->init)
- plat->init();
- }
-
return 0;
clk_dis:
clk_disable_unprepare(uap->clk);
- out:
return retval;
}
@@ -1689,6 +1710,7 @@ static struct uart_ops amba_pl011_pops = {
.config_port = pl011_config_port,
.verify_port = pl011_verify_port,
#ifdef CONFIG_CONSOLE_POLL
+ .poll_init = pl011_hwinit,
.poll_get_char = pl011_get_poll_char,
.poll_put_char = pl011_put_poll_char,
#endif
--
1.7.11.5
next prev parent reply other threads:[~2012-09-10 4:16 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-10 4:08 [PATCH v5 0/14] KGDB/KDB FIQ (NMI) debugger Anton Vorontsov
2012-09-10 4:08 ` Anton Vorontsov
2012-09-10 4:11 ` [PATCH 01/14] serial/amba-pl011: fix ages old copy-paste errors Anton Vorontsov
2012-09-10 4:11 ` Anton Vorontsov
2012-09-10 4:12 ` [PATCH 02/14] drivers/tty/serial/amba-pl0{10,11}.c: use clk_prepare_enable and clk_disable_unprepare Anton Vorontsov
2012-09-10 4:12 ` Anton Vorontsov
2012-09-10 4:12 ` [PATCH 03/14] kernel/debug: Mask KGDB NMI upon entry Anton Vorontsov
2012-09-10 4:12 ` Anton Vorontsov
2012-09-10 4:13 ` [PATCH 04/14] kdb: Implement disable_nmi command Anton Vorontsov
2012-09-10 4:13 ` Anton Vorontsov
2012-09-10 4:13 ` [PATCH 05/14] kdb: Turn KGDB_KDB=n stubs into static inlines Anton Vorontsov
2012-09-10 4:13 ` Anton Vorontsov
2012-09-10 4:13 ` [PATCH 06/14] tty/serial/core: Introduce poll_init callback Anton Vorontsov
2012-09-10 4:13 ` Anton Vorontsov
2012-09-10 11:13 ` Alan Cox
2012-09-10 11:13 ` Alan Cox
2012-09-10 17:57 ` Anton Vorontsov
2012-09-10 17:57 ` Anton Vorontsov
2012-09-10 19:18 ` Alan Cox
2012-09-10 19:18 ` Alan Cox
2012-09-10 4:13 ` Anton Vorontsov [this message]
2012-09-10 4:13 ` [PATCH 07/14] tty/serial/amba-pl011: Implement " Anton Vorontsov
2012-09-10 4:13 ` [PATCH 08/14] tty/serial/kgdboc: Add and wire up clear_irqs callback Anton Vorontsov
2012-09-10 4:13 ` Anton Vorontsov
2012-09-10 11:16 ` Alan Cox
2012-09-10 11:16 ` Alan Cox
2012-09-10 17:57 ` Anton Vorontsov
2012-09-10 17:57 ` Anton Vorontsov
2012-09-10 19:19 ` Alan Cox
2012-09-10 19:19 ` Alan Cox
2012-09-10 20:13 ` Anton Vorontsov
2012-09-10 20:13 ` Anton Vorontsov
2012-09-10 4:14 ` [PATCH 09/14] tty/serial/amba-pl011: Implement " Anton Vorontsov
2012-09-10 4:14 ` Anton Vorontsov
2012-09-10 11:17 ` Alan Cox
2012-09-10 11:17 ` Alan Cox
2012-09-10 17:56 ` Anton Vorontsov
2012-09-10 17:56 ` Anton Vorontsov
2012-09-10 4:14 ` [PATCH 10/14] tty/serial: Add kgdb_nmi driver Anton Vorontsov
2012-09-10 4:14 ` Anton Vorontsov
2012-09-10 11:11 ` Alan Cox
2012-09-10 11:11 ` Alan Cox
2012-09-10 17:54 ` Anton Vorontsov
2012-09-10 17:54 ` Anton Vorontsov
2012-09-10 4:14 ` [PATCH 11/14] ARM: Move some macros from entry-armv to entry-header Anton Vorontsov
2012-09-10 4:14 ` Anton Vorontsov
2012-09-10 4:14 ` [PATCH 12/14] ARM: Add KGDB/KDB FIQ debugger generic code Anton Vorontsov
2012-09-10 4:14 ` Anton Vorontsov
2012-09-10 4:14 ` [PATCH 13/14] ARM: VIC: Add a couple of low-level FIQ management helpers Anton Vorontsov
2012-09-10 4:14 ` Anton Vorontsov
2012-09-10 4:14 ` [PATCH 14/14] ARM: versatile: Make able to use UART ports for KGDB FIQ debugger Anton Vorontsov
2012-09-10 4:14 ` Anton Vorontsov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120910041346.GG29537@lizard \
--to=anton.vorontsov@linaro.org \
--cc=akpm@linux-foundation.org \
--cc=alan@linux.intel.com \
--cc=arve@android.com \
--cc=ccross@android.com \
--cc=gregkh@linuxfoundation.org \
--cc=jason.wessel@windriver.com \
--cc=john.stultz@linaro.org \
--cc=kernel-team@android.com \
--cc=kgdb-bugreport@lists.sourceforge.net \
--cc=linaro-kernel@lists.linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=patches@linaro.org \
--cc=swetland@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.