From: Tony Lindgren <tony@atomide.com>
To: linux-arm-kernel@lists.infradead.org
Cc: linux-omap@vger.kernel.org
Subject: [PATCH 13/11] ARM: OMAP2+: Fix relative includes for serial.h
Date: Wed, 31 Oct 2012 15:08:39 -0700 [thread overview]
Message-ID: <20121031220838.GC15766@atomide.com> (raw)
In-Reply-To: <20121030234852.25936.12482.stgit@muffinssi.local>
As discussed on linux-arm-kernel, we want to avoid
relative includes for the arch/arm/*omap* code:
http://www.spinics.net/lists/linux-omap/msg80520.html
Fix serial.h by moving it to mach/serial.h.
Signed-off-by: Tony Lindgren <tony@atomide.com>
diff --git a/arch/arm/mach-omap2/include/mach/debug-macro.S b/arch/arm/mach-omap2/include/mach/debug-macro.S
index 4b5cbdf..cfaed13 100644
--- a/arch/arm/mach-omap2/include/mach/debug-macro.S
+++ b/arch/arm/mach-omap2/include/mach/debug-macro.S
@@ -13,7 +13,7 @@
#include <linux/serial_reg.h>
-#include <../mach-omap2/serial.h>
+#include <mach/serial.h>
#define UART_OFFSET(addr) ((addr) & 0x00ffffff)
diff --git a/arch/arm/mach-omap2/include/mach/serial.h b/arch/arm/mach-omap2/include/mach/serial.h
new file mode 100644
index 0000000..70eda00
--- /dev/null
+++ b/arch/arm/mach-omap2/include/mach/serial.h
@@ -0,0 +1,103 @@
+/*
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support- Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * Memory entry used for the DEBUG_LL UART configuration, relative to
+ * start of RAM. See also uncompress.h and debug-macro.S.
+ *
+ * Note that using a memory location for storing the UART configuration
+ * has at least two limitations:
+ *
+ * 1. Kernel uncompress code cannot overlap OMAP_UART_INFO as the
+ * uncompress code could then partially overwrite itself
+ * 2. We assume printascii is called at least once before paging_init,
+ * and addruart has a chance to read OMAP_UART_INFO
+ */
+#define OMAP_UART_INFO_OFS 0x3ffc
+
+/* OMAP2 serial ports */
+#define OMAP2_UART1_BASE 0x4806a000
+#define OMAP2_UART2_BASE 0x4806c000
+#define OMAP2_UART3_BASE 0x4806e000
+
+/* OMAP3 serial ports */
+#define OMAP3_UART1_BASE OMAP2_UART1_BASE
+#define OMAP3_UART2_BASE OMAP2_UART2_BASE
+#define OMAP3_UART3_BASE 0x49020000
+#define OMAP3_UART4_BASE 0x49042000 /* Only on 36xx */
+#define OMAP3_UART4_AM35XX_BASE 0x4809E000 /* Only on AM35xx */
+
+/* OMAP4 serial ports */
+#define OMAP4_UART1_BASE OMAP2_UART1_BASE
+#define OMAP4_UART2_BASE OMAP2_UART2_BASE
+#define OMAP4_UART3_BASE 0x48020000
+#define OMAP4_UART4_BASE 0x4806e000
+
+/* TI81XX serial ports */
+#define TI81XX_UART1_BASE 0x48020000
+#define TI81XX_UART2_BASE 0x48022000
+#define TI81XX_UART3_BASE 0x48024000
+
+/* AM3505/3517 UART4 */
+#define AM35XX_UART4_BASE 0x4809E000 /* Only on AM3505/3517 */
+
+/* AM33XX serial port */
+#define AM33XX_UART1_BASE 0x44E09000
+
+/* OMAP5 serial ports */
+#define OMAP5_UART1_BASE OMAP2_UART1_BASE
+#define OMAP5_UART2_BASE OMAP2_UART2_BASE
+#define OMAP5_UART3_BASE OMAP4_UART3_BASE
+#define OMAP5_UART4_BASE OMAP4_UART4_BASE
+#define OMAP5_UART5_BASE 0x48066000
+#define OMAP5_UART6_BASE 0x48068000
+
+/* External port on Zoom2/3 */
+#define ZOOM_UART_BASE 0x10000000
+#define ZOOM_UART_VIRT 0xfa400000
+
+#define OMAP_PORT_SHIFT 2
+#define ZOOM_PORT_SHIFT 1
+
+#define OMAP24XX_BASE_BAUD (48000000/16)
+
+/*
+ * DEBUG_LL port encoding stored into the UART1 scratchpad register by
+ * decomp_setup in uncompress.h
+ */
+#define OMAP2UART1 21
+#define OMAP2UART2 22
+#define OMAP2UART3 23
+#define OMAP3UART1 OMAP2UART1
+#define OMAP3UART2 OMAP2UART2
+#define OMAP3UART3 33
+#define OMAP3UART4 34 /* Only on 36xx */
+#define OMAP4UART1 OMAP2UART1
+#define OMAP4UART2 OMAP2UART2
+#define OMAP4UART3 43
+#define OMAP4UART4 44
+#define TI81XXUART1 81
+#define TI81XXUART2 82
+#define TI81XXUART3 83
+#define AM33XXUART1 84
+#define OMAP5UART3 OMAP4UART3
+#define OMAP5UART4 OMAP4UART4
+#define ZOOM_UART 95 /* Only on zoom2/3 */
+
+#ifndef __ASSEMBLER__
+
+struct omap_board_data;
+struct omap_uart_port_info;
+
+extern void omap_serial_init(void);
+extern void omap_serial_board_init(struct omap_uart_port_info *platform_data);
+extern void omap_serial_init_port(struct omap_board_data *bdata,
+ struct omap_uart_port_info *platform_data);
+#endif
diff --git a/arch/arm/mach-omap2/include/mach/uncompress.h b/arch/arm/mach-omap2/include/mach/uncompress.h
index 28d1ec0..8e3546d 100644
--- a/arch/arm/mach-omap2/include/mach/uncompress.h
+++ b/arch/arm/mach-omap2/include/mach/uncompress.h
@@ -23,7 +23,7 @@
#include <asm/memory.h>
#include <asm/mach-types.h>
-#include <../mach-omap2/serial.h>
+#include <mach/serial.h>
#define MDR1_MODE_MASK 0x07
diff --git a/arch/arm/mach-omap2/serial.h b/arch/arm/mach-omap2/serial.h
index 6a68062..c4014f0 100644
--- a/arch/arm/mach-omap2/serial.h
+++ b/arch/arm/mach-omap2/serial.h
@@ -1,112 +1 @@
-/*
- * arch/arm/plat-omap/include/mach/serial.h
- *
- * Copyright (C) 2009 Texas Instruments
- * Added OMAP4 support- Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_SERIAL_H
-#define __ASM_ARCH_SERIAL_H
-
-#include <linux/init.h>
-
-/*
- * Memory entry used for the DEBUG_LL UART configuration, relative to
- * start of RAM. See also uncompress.h and debug-macro.S.
- *
- * Note that using a memory location for storing the UART configuration
- * has at least two limitations:
- *
- * 1. Kernel uncompress code cannot overlap OMAP_UART_INFO as the
- * uncompress code could then partially overwrite itself
- * 2. We assume printascii is called at least once before paging_init,
- * and addruart has a chance to read OMAP_UART_INFO
- */
-#define OMAP_UART_INFO_OFS 0x3ffc
-
-/* OMAP2 serial ports */
-#define OMAP2_UART1_BASE 0x4806a000
-#define OMAP2_UART2_BASE 0x4806c000
-#define OMAP2_UART3_BASE 0x4806e000
-
-/* OMAP3 serial ports */
-#define OMAP3_UART1_BASE OMAP2_UART1_BASE
-#define OMAP3_UART2_BASE OMAP2_UART2_BASE
-#define OMAP3_UART3_BASE 0x49020000
-#define OMAP3_UART4_BASE 0x49042000 /* Only on 36xx */
-#define OMAP3_UART4_AM35XX_BASE 0x4809E000 /* Only on AM35xx */
-
-/* OMAP4 serial ports */
-#define OMAP4_UART1_BASE OMAP2_UART1_BASE
-#define OMAP4_UART2_BASE OMAP2_UART2_BASE
-#define OMAP4_UART3_BASE 0x48020000
-#define OMAP4_UART4_BASE 0x4806e000
-
-/* TI81XX serial ports */
-#define TI81XX_UART1_BASE 0x48020000
-#define TI81XX_UART2_BASE 0x48022000
-#define TI81XX_UART3_BASE 0x48024000
-
-/* AM3505/3517 UART4 */
-#define AM35XX_UART4_BASE 0x4809E000 /* Only on AM3505/3517 */
-
-/* AM33XX serial port */
-#define AM33XX_UART1_BASE 0x44E09000
-
-/* OMAP5 serial ports */
-#define OMAP5_UART1_BASE OMAP2_UART1_BASE
-#define OMAP5_UART2_BASE OMAP2_UART2_BASE
-#define OMAP5_UART3_BASE OMAP4_UART3_BASE
-#define OMAP5_UART4_BASE OMAP4_UART4_BASE
-#define OMAP5_UART5_BASE 0x48066000
-#define OMAP5_UART6_BASE 0x48068000
-
-/* External port on Zoom2/3 */
-#define ZOOM_UART_BASE 0x10000000
-#define ZOOM_UART_VIRT 0xfa400000
-
-#define OMAP_PORT_SHIFT 2
-#define ZOOM_PORT_SHIFT 1
-
-#define OMAP24XX_BASE_BAUD (48000000/16)
-
-/*
- * DEBUG_LL port encoding stored into the UART1 scratchpad register by
- * decomp_setup in uncompress.h
- */
-#define OMAP2UART1 21
-#define OMAP2UART2 22
-#define OMAP2UART3 23
-#define OMAP3UART1 OMAP2UART1
-#define OMAP3UART2 OMAP2UART2
-#define OMAP3UART3 33
-#define OMAP3UART4 34 /* Only on 36xx */
-#define OMAP4UART1 OMAP2UART1
-#define OMAP4UART2 OMAP2UART2
-#define OMAP4UART3 43
-#define OMAP4UART4 44
-#define TI81XXUART1 81
-#define TI81XXUART2 82
-#define TI81XXUART3 83
-#define AM33XXUART1 84
-#define OMAP5UART3 OMAP4UART3
-#define OMAP5UART4 OMAP4UART4
-#define ZOOM_UART 95 /* Only on zoom2/3 */
-
-#ifndef __ASSEMBLER__
-
-struct omap_board_data;
-struct omap_uart_port_info;
-
-extern void omap_serial_init(void);
-extern void omap_serial_board_init(struct omap_uart_port_info *platform_data);
-extern void omap_serial_init_port(struct omap_board_data *bdata,
- struct omap_uart_port_info *platform_data);
-#endif
-
-#endif
+#include <mach/serial.h>
WARNING: multiple messages have this Message-ID (diff)
From: tony@atomide.com (Tony Lindgren)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 13/11] ARM: OMAP2+: Fix relative includes for serial.h
Date: Wed, 31 Oct 2012 15:08:39 -0700 [thread overview]
Message-ID: <20121031220838.GC15766@atomide.com> (raw)
In-Reply-To: <20121030234852.25936.12482.stgit@muffinssi.local>
As discussed on linux-arm-kernel, we want to avoid
relative includes for the arch/arm/*omap* code:
http://www.spinics.net/lists/linux-omap/msg80520.html
Fix serial.h by moving it to mach/serial.h.
Signed-off-by: Tony Lindgren <tony@atomide.com>
diff --git a/arch/arm/mach-omap2/include/mach/debug-macro.S b/arch/arm/mach-omap2/include/mach/debug-macro.S
index 4b5cbdf..cfaed13 100644
--- a/arch/arm/mach-omap2/include/mach/debug-macro.S
+++ b/arch/arm/mach-omap2/include/mach/debug-macro.S
@@ -13,7 +13,7 @@
#include <linux/serial_reg.h>
-#include <../mach-omap2/serial.h>
+#include <mach/serial.h>
#define UART_OFFSET(addr) ((addr) & 0x00ffffff)
diff --git a/arch/arm/mach-omap2/include/mach/serial.h b/arch/arm/mach-omap2/include/mach/serial.h
new file mode 100644
index 0000000..70eda00
--- /dev/null
+++ b/arch/arm/mach-omap2/include/mach/serial.h
@@ -0,0 +1,103 @@
+/*
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support- Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * Memory entry used for the DEBUG_LL UART configuration, relative to
+ * start of RAM. See also uncompress.h and debug-macro.S.
+ *
+ * Note that using a memory location for storing the UART configuration
+ * has at least two limitations:
+ *
+ * 1. Kernel uncompress code cannot overlap OMAP_UART_INFO as the
+ * uncompress code could then partially overwrite itself
+ * 2. We assume printascii is called at least once before paging_init,
+ * and addruart has a chance to read OMAP_UART_INFO
+ */
+#define OMAP_UART_INFO_OFS 0x3ffc
+
+/* OMAP2 serial ports */
+#define OMAP2_UART1_BASE 0x4806a000
+#define OMAP2_UART2_BASE 0x4806c000
+#define OMAP2_UART3_BASE 0x4806e000
+
+/* OMAP3 serial ports */
+#define OMAP3_UART1_BASE OMAP2_UART1_BASE
+#define OMAP3_UART2_BASE OMAP2_UART2_BASE
+#define OMAP3_UART3_BASE 0x49020000
+#define OMAP3_UART4_BASE 0x49042000 /* Only on 36xx */
+#define OMAP3_UART4_AM35XX_BASE 0x4809E000 /* Only on AM35xx */
+
+/* OMAP4 serial ports */
+#define OMAP4_UART1_BASE OMAP2_UART1_BASE
+#define OMAP4_UART2_BASE OMAP2_UART2_BASE
+#define OMAP4_UART3_BASE 0x48020000
+#define OMAP4_UART4_BASE 0x4806e000
+
+/* TI81XX serial ports */
+#define TI81XX_UART1_BASE 0x48020000
+#define TI81XX_UART2_BASE 0x48022000
+#define TI81XX_UART3_BASE 0x48024000
+
+/* AM3505/3517 UART4 */
+#define AM35XX_UART4_BASE 0x4809E000 /* Only on AM3505/3517 */
+
+/* AM33XX serial port */
+#define AM33XX_UART1_BASE 0x44E09000
+
+/* OMAP5 serial ports */
+#define OMAP5_UART1_BASE OMAP2_UART1_BASE
+#define OMAP5_UART2_BASE OMAP2_UART2_BASE
+#define OMAP5_UART3_BASE OMAP4_UART3_BASE
+#define OMAP5_UART4_BASE OMAP4_UART4_BASE
+#define OMAP5_UART5_BASE 0x48066000
+#define OMAP5_UART6_BASE 0x48068000
+
+/* External port on Zoom2/3 */
+#define ZOOM_UART_BASE 0x10000000
+#define ZOOM_UART_VIRT 0xfa400000
+
+#define OMAP_PORT_SHIFT 2
+#define ZOOM_PORT_SHIFT 1
+
+#define OMAP24XX_BASE_BAUD (48000000/16)
+
+/*
+ * DEBUG_LL port encoding stored into the UART1 scratchpad register by
+ * decomp_setup in uncompress.h
+ */
+#define OMAP2UART1 21
+#define OMAP2UART2 22
+#define OMAP2UART3 23
+#define OMAP3UART1 OMAP2UART1
+#define OMAP3UART2 OMAP2UART2
+#define OMAP3UART3 33
+#define OMAP3UART4 34 /* Only on 36xx */
+#define OMAP4UART1 OMAP2UART1
+#define OMAP4UART2 OMAP2UART2
+#define OMAP4UART3 43
+#define OMAP4UART4 44
+#define TI81XXUART1 81
+#define TI81XXUART2 82
+#define TI81XXUART3 83
+#define AM33XXUART1 84
+#define OMAP5UART3 OMAP4UART3
+#define OMAP5UART4 OMAP4UART4
+#define ZOOM_UART 95 /* Only on zoom2/3 */
+
+#ifndef __ASSEMBLER__
+
+struct omap_board_data;
+struct omap_uart_port_info;
+
+extern void omap_serial_init(void);
+extern void omap_serial_board_init(struct omap_uart_port_info *platform_data);
+extern void omap_serial_init_port(struct omap_board_data *bdata,
+ struct omap_uart_port_info *platform_data);
+#endif
diff --git a/arch/arm/mach-omap2/include/mach/uncompress.h b/arch/arm/mach-omap2/include/mach/uncompress.h
index 28d1ec0..8e3546d 100644
--- a/arch/arm/mach-omap2/include/mach/uncompress.h
+++ b/arch/arm/mach-omap2/include/mach/uncompress.h
@@ -23,7 +23,7 @@
#include <asm/memory.h>
#include <asm/mach-types.h>
-#include <../mach-omap2/serial.h>
+#include <mach/serial.h>
#define MDR1_MODE_MASK 0x07
diff --git a/arch/arm/mach-omap2/serial.h b/arch/arm/mach-omap2/serial.h
index 6a68062..c4014f0 100644
--- a/arch/arm/mach-omap2/serial.h
+++ b/arch/arm/mach-omap2/serial.h
@@ -1,112 +1 @@
-/*
- * arch/arm/plat-omap/include/mach/serial.h
- *
- * Copyright (C) 2009 Texas Instruments
- * Added OMAP4 support- Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_SERIAL_H
-#define __ASM_ARCH_SERIAL_H
-
-#include <linux/init.h>
-
-/*
- * Memory entry used for the DEBUG_LL UART configuration, relative to
- * start of RAM. See also uncompress.h and debug-macro.S.
- *
- * Note that using a memory location for storing the UART configuration
- * has at least two limitations:
- *
- * 1. Kernel uncompress code cannot overlap OMAP_UART_INFO as the
- * uncompress code could then partially overwrite itself
- * 2. We assume printascii is called at least once before paging_init,
- * and addruart has a chance to read OMAP_UART_INFO
- */
-#define OMAP_UART_INFO_OFS 0x3ffc
-
-/* OMAP2 serial ports */
-#define OMAP2_UART1_BASE 0x4806a000
-#define OMAP2_UART2_BASE 0x4806c000
-#define OMAP2_UART3_BASE 0x4806e000
-
-/* OMAP3 serial ports */
-#define OMAP3_UART1_BASE OMAP2_UART1_BASE
-#define OMAP3_UART2_BASE OMAP2_UART2_BASE
-#define OMAP3_UART3_BASE 0x49020000
-#define OMAP3_UART4_BASE 0x49042000 /* Only on 36xx */
-#define OMAP3_UART4_AM35XX_BASE 0x4809E000 /* Only on AM35xx */
-
-/* OMAP4 serial ports */
-#define OMAP4_UART1_BASE OMAP2_UART1_BASE
-#define OMAP4_UART2_BASE OMAP2_UART2_BASE
-#define OMAP4_UART3_BASE 0x48020000
-#define OMAP4_UART4_BASE 0x4806e000
-
-/* TI81XX serial ports */
-#define TI81XX_UART1_BASE 0x48020000
-#define TI81XX_UART2_BASE 0x48022000
-#define TI81XX_UART3_BASE 0x48024000
-
-/* AM3505/3517 UART4 */
-#define AM35XX_UART4_BASE 0x4809E000 /* Only on AM3505/3517 */
-
-/* AM33XX serial port */
-#define AM33XX_UART1_BASE 0x44E09000
-
-/* OMAP5 serial ports */
-#define OMAP5_UART1_BASE OMAP2_UART1_BASE
-#define OMAP5_UART2_BASE OMAP2_UART2_BASE
-#define OMAP5_UART3_BASE OMAP4_UART3_BASE
-#define OMAP5_UART4_BASE OMAP4_UART4_BASE
-#define OMAP5_UART5_BASE 0x48066000
-#define OMAP5_UART6_BASE 0x48068000
-
-/* External port on Zoom2/3 */
-#define ZOOM_UART_BASE 0x10000000
-#define ZOOM_UART_VIRT 0xfa400000
-
-#define OMAP_PORT_SHIFT 2
-#define ZOOM_PORT_SHIFT 1
-
-#define OMAP24XX_BASE_BAUD (48000000/16)
-
-/*
- * DEBUG_LL port encoding stored into the UART1 scratchpad register by
- * decomp_setup in uncompress.h
- */
-#define OMAP2UART1 21
-#define OMAP2UART2 22
-#define OMAP2UART3 23
-#define OMAP3UART1 OMAP2UART1
-#define OMAP3UART2 OMAP2UART2
-#define OMAP3UART3 33
-#define OMAP3UART4 34 /* Only on 36xx */
-#define OMAP4UART1 OMAP2UART1
-#define OMAP4UART2 OMAP2UART2
-#define OMAP4UART3 43
-#define OMAP4UART4 44
-#define TI81XXUART1 81
-#define TI81XXUART2 82
-#define TI81XXUART3 83
-#define AM33XXUART1 84
-#define OMAP5UART3 OMAP4UART3
-#define OMAP5UART4 OMAP4UART4
-#define ZOOM_UART 95 /* Only on zoom2/3 */
-
-#ifndef __ASSEMBLER__
-
-struct omap_board_data;
-struct omap_uart_port_info;
-
-extern void omap_serial_init(void);
-extern void omap_serial_board_init(struct omap_uart_port_info *platform_data);
-extern void omap_serial_init_port(struct omap_board_data *bdata,
- struct omap_uart_port_info *platform_data);
-#endif
-
-#endif
+#include <mach/serial.h>
next prev parent reply other threads:[~2012-10-31 22:08 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-30 23:52 [PATCH 00/11] Fix relative includes for omaps introduced by recent clean-up Tony Lindgren
2012-10-30 23:52 ` Tony Lindgren
2012-10-30 23:52 ` [PATCH 01/11] ARM: OMAP: Split sram.h to local headers and minimal shared header Tony Lindgren
2012-10-30 23:52 ` Tony Lindgren
2012-10-30 23:52 ` [PATCH 02/11] ARM: OMAP: Introduce common omap_map_sram() and omap_sram_reset() Tony Lindgren
2012-10-30 23:52 ` Tony Lindgren
2012-10-30 23:52 ` [PATCH 03/11] ARM: OMAP: Move omap1 specific code to local sram.c Tony Lindgren
2012-10-30 23:52 ` Tony Lindgren
2012-10-30 23:52 ` [PATCH 04/11] ARM: OMAP: Move omap2+ specific parts of sram.c to mach-omap2 Tony Lindgren
2012-10-30 23:52 ` Tony Lindgren
2012-10-31 22:40 ` Tony Lindgren
2012-10-31 22:40 ` Tony Lindgren
2012-10-30 23:52 ` [PATCH 05/11] ARM: OMAP: Make plat-omap/i2c.c port checks local Tony Lindgren
2012-10-30 23:52 ` Tony Lindgren
2012-10-30 23:52 ` [PATCH 06/11] ARM: OMAP: Fix relative includes for shared i2c.h file Tony Lindgren
2012-10-30 23:52 ` Tony Lindgren
2012-10-30 23:52 ` [PATCH 07/11] ARM: OMAP: Move omap-pm-noop.c local to mach-omap2 Tony Lindgren
2012-10-30 23:52 ` Tony Lindgren
2012-10-31 20:58 ` Tony Lindgren
2012-10-31 20:58 ` Tony Lindgren
2012-10-31 23:02 ` Laurent Pinchart
2012-10-31 23:02 ` Laurent Pinchart
2012-10-31 23:11 ` Tony Lindgren
2012-10-31 23:11 ` Tony Lindgren
2012-11-07 22:04 ` Jon Hunter
2012-11-07 22:04 ` Jon Hunter
2012-11-07 22:18 ` Tony Lindgren
2012-11-07 22:18 ` Tony Lindgren
2012-10-30 23:52 ` [PATCH 08/11] ARM: OMAP: Remove plat-omap/common.h Tony Lindgren
2012-10-30 23:52 ` Tony Lindgren
2012-10-30 23:53 ` [PATCH 09/11] ARM: OMAP: Fix relative includes for debug-devices.h Tony Lindgren
2012-10-30 23:53 ` Tony Lindgren
2012-10-31 0:05 ` Paul Walmsley
2012-10-31 0:05 ` Paul Walmsley
2012-10-30 23:53 ` [PATCH 10/11] ARM: OMAP: Remove cpu_is_omap usage from plat-omap/dma.c Tony Lindgren
2012-10-30 23:53 ` Tony Lindgren
2012-10-30 23:53 ` [PATCH 11/11] ARM: OMAP1: Remove relative includes Tony Lindgren
2012-10-30 23:53 ` Tony Lindgren
2012-10-31 21:11 ` Tony Lindgren
2012-10-31 21:11 ` Tony Lindgren
2012-10-31 21:52 ` [PATCH 12/11] ARM: OMAP: Fix relative includes for fpga.h Tony Lindgren
2012-10-31 21:52 ` Tony Lindgren
2012-11-12 10:47 ` Benoit Cousson
2012-11-12 10:47 ` Benoit Cousson
2012-11-12 21:34 ` Tony Lindgren
2012-11-12 21:34 ` Tony Lindgren
2012-10-31 22:08 ` Tony Lindgren [this message]
2012-10-31 22:08 ` [PATCH 13/11] ARM: OMAP2+: Fix relative includes for serial.h Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20121031220838.GC15766@atomide.com \
--to=tony@atomide.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.