From: Nishanth Menon <nm@ti.com>
To: Eduardo Valentin <eduardo.valentin@ti.com>
Cc: <swarren@wwwdotorg.org>, <pawel.moll@arm.com>,
<mark.rutland@arm.com>, <ian.campbell@citrix.com>,
<rob.herring@calxeda.com>, <linux@roeck-us.net>,
<rui.zhang@intel.com>, <grant.likely@linaro.org>,
<linux-pm@vger.kernel.org>, <devicetree@vger.kernel.org>,
<lm-sensors@lm-sensors.org>, <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH 6/7] arm: dts: add tmp102 i2c sensor node on dra7-evm
Date: Tue, 1 Oct 2013 17:51:08 -0500 [thread overview]
Message-ID: <20131001225108.GA11885@kahuna> (raw)
In-Reply-To: <1380652344-18819-7-git-send-email-eduardo.valentin@ti.com>
On 14:32-20131001, Eduardo Valentin wrote:
> On dra7-evm there is an tmp102 temperature sensor on i2c bus 1.
> This patch adds its device tree node.
>
> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
> ---
> arch/arm/boot/dts/dra7-evm.dts | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
> diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
> index 21fe16b..3b6c16a 100644
> --- a/arch/arm/boot/dts/dra7-evm.dts
> +++ b/arch/arm/boot/dts/dra7-evm.dts
> @@ -7,6 +7,8 @@
> */
> /dts-v1/;
>
> +#include <dt-bindings/thermal/thermal.h>
> +
^^ needed?
> #include "dra7.dtsi"
>
> / {
> @@ -93,6 +95,12 @@
> pinctrl-names = "default";
> pinctrl-0 = <&i2c1_pins>;
> clock-frequency = <400000>;
could you add an EOL here?
> + tmp102: tmp102@48{
a space before the {?
> + compatible = "ti,tmp102";
> + reg = <0x48>;
> +
> + #thermal-sensor-cells = <0>;
> + };
> };
>
> &i2c2 {
> --
> 1.8.2.1.342.gfa7285d
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pm" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Regards,
Nishanth Menon
WARNING: multiple messages have this Message-ID (diff)
From: Nishanth Menon <nm@ti.com>
To: Eduardo Valentin <eduardo.valentin@ti.com>
Cc: swarren@wwwdotorg.org, pawel.moll@arm.com, mark.rutland@arm.com,
ian.campbell@citrix.com, rob.herring@calxeda.com,
linux@roeck-us.net, rui.zhang@intel.com, grant.likely@linaro.org,
linux-pm@vger.kernel.org, devicetree@vger.kernel.org,
lm-sensors@lm-sensors.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 6/7] arm: dts: add tmp102 i2c sensor node on dra7-evm
Date: Tue, 1 Oct 2013 17:51:08 -0500 [thread overview]
Message-ID: <20131001225108.GA11885@kahuna> (raw)
In-Reply-To: <1380652344-18819-7-git-send-email-eduardo.valentin@ti.com>
On 14:32-20131001, Eduardo Valentin wrote:
> On dra7-evm there is an tmp102 temperature sensor on i2c bus 1.
> This patch adds its device tree node.
>
> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
> ---
> arch/arm/boot/dts/dra7-evm.dts | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
> diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
> index 21fe16b..3b6c16a 100644
> --- a/arch/arm/boot/dts/dra7-evm.dts
> +++ b/arch/arm/boot/dts/dra7-evm.dts
> @@ -7,6 +7,8 @@
> */
> /dts-v1/;
>
> +#include <dt-bindings/thermal/thermal.h>
> +
^^ needed?
> #include "dra7.dtsi"
>
> / {
> @@ -93,6 +95,12 @@
> pinctrl-names = "default";
> pinctrl-0 = <&i2c1_pins>;
> clock-frequency = <400000>;
could you add an EOL here?
> + tmp102: tmp102@48{
a space before the {?
> + compatible = "ti,tmp102";
> + reg = <0x48>;
> +
> + #thermal-sensor-cells = <0>;
> + };
> };
>
> &i2c2 {
> --
> 1.8.2.1.342.gfa7285d
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pm" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Regards,
Nishanth Menon
WARNING: multiple messages have this Message-ID (diff)
From: Nishanth Menon <nm@ti.com>
To: Eduardo Valentin <eduardo.valentin@ti.com>
Cc: swarren@wwwdotorg.org, pawel.moll@arm.com, mark.rutland@arm.com,
ian.campbell@citrix.com, rob.herring@calxeda.com,
linux@roeck-us.net, rui.zhang@intel.com, grant.likely@linaro.org,
linux-pm@vger.kernel.org, devicetree@vger.kernel.org,
lm-sensors@lm-sensors.org, linux-kernel@vger.kernel.org
Subject: Re: [lm-sensors] [PATCH 6/7] arm: dts: add tmp102 i2c sensor node on dra7-evm
Date: Tue, 01 Oct 2013 22:51:08 +0000 [thread overview]
Message-ID: <20131001225108.GA11885@kahuna> (raw)
In-Reply-To: <1380652344-18819-7-git-send-email-eduardo.valentin@ti.com>
On 14:32-20131001, Eduardo Valentin wrote:
> On dra7-evm there is an tmp102 temperature sensor on i2c bus 1.
> This patch adds its device tree node.
>
> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
> ---
> arch/arm/boot/dts/dra7-evm.dts | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
> diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
> index 21fe16b..3b6c16a 100644
> --- a/arch/arm/boot/dts/dra7-evm.dts
> +++ b/arch/arm/boot/dts/dra7-evm.dts
> @@ -7,6 +7,8 @@
> */
> /dts-v1/;
>
> +#include <dt-bindings/thermal/thermal.h>
> +
^^ needed?
> #include "dra7.dtsi"
>
> / {
> @@ -93,6 +95,12 @@
> pinctrl-names = "default";
> pinctrl-0 = <&i2c1_pins>;
> clock-frequency = <400000>;
could you add an EOL here?
> + tmp102: tmp102@48{
a space before the {?
> + compatible = "ti,tmp102";
> + reg = <0x48>;
> +
> + #thermal-sensor-cells = <0>;
> + };
> };
>
> &i2c2 {
> --
> 1.8.2.1.342.gfa7285d
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pm" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Regards,
Nishanth Menon
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
next prev parent reply other threads:[~2013-10-01 22:52 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-01 18:32 [PATCH 0/7] DRA7: DT thermal support Eduardo Valentin
2013-10-01 18:32 ` [lm-sensors] " Eduardo Valentin
2013-10-01 18:32 ` Eduardo Valentin
2013-10-01 18:32 ` [PATCH 1/7] arm: dts: add dra7 DSPEVE thermal data Eduardo Valentin
2013-10-01 18:32 ` [lm-sensors] " Eduardo Valentin
2013-10-01 18:32 ` Eduardo Valentin
2013-10-01 22:37 ` Nishanth Menon
2013-10-01 22:37 ` [lm-sensors] " Nishanth Menon
2013-10-01 22:37 ` Nishanth Menon
2013-10-02 1:27 ` Eduardo Valentin
2013-10-02 1:27 ` [lm-sensors] " Eduardo Valentin
2013-10-02 1:27 ` Eduardo Valentin
2013-10-01 18:32 ` [PATCH 2/7] arm: dts: add dra7 IVA " Eduardo Valentin
2013-10-01 18:32 ` [lm-sensors] " Eduardo Valentin
2013-10-01 18:32 ` Eduardo Valentin
2013-10-01 22:33 ` Nishanth Menon
2013-10-01 22:33 ` [lm-sensors] " Nishanth Menon
2013-10-01 22:33 ` Nishanth Menon
2013-10-02 1:26 ` Eduardo Valentin
2013-10-02 1:26 ` [lm-sensors] " Eduardo Valentin
2013-10-02 1:26 ` Eduardo Valentin
2013-10-01 18:32 ` [PATCH 3/7] arm: dts: dra7: add bandgap entry Eduardo Valentin
2013-10-01 18:32 ` [lm-sensors] " Eduardo Valentin
2013-10-01 18:32 ` Eduardo Valentin
2013-10-01 22:46 ` Nishanth Menon
2013-10-01 22:46 ` [lm-sensors] " Nishanth Menon
2013-10-01 22:46 ` Nishanth Menon
2013-10-02 1:28 ` Eduardo Valentin
2013-10-02 1:28 ` [lm-sensors] " Eduardo Valentin
2013-10-02 1:28 ` Eduardo Valentin
2013-11-06 20:23 ` [PATCHv2 " Eduardo Valentin
2013-11-06 20:23 ` [lm-sensors] " Eduardo Valentin
2013-11-06 20:23 ` Eduardo Valentin
2013-10-01 18:32 ` [PATCH 4/7] arm: dts: add cooling properties on dra7 cpu node Eduardo Valentin
2013-10-01 18:32 ` [lm-sensors] " Eduardo Valentin
2013-10-01 18:32 ` Eduardo Valentin
2013-10-01 18:32 ` [PATCH 5/7] arm: dts: dra7: add thermal data Eduardo Valentin
2013-10-01 18:32 ` [lm-sensors] " Eduardo Valentin
2013-10-01 18:32 ` Eduardo Valentin
2013-10-01 18:32 ` [PATCH 6/7] arm: dts: add tmp102 i2c sensor node on dra7-evm Eduardo Valentin
2013-10-01 18:32 ` [lm-sensors] " Eduardo Valentin
2013-10-01 18:32 ` Eduardo Valentin
2013-10-01 22:51 ` Nishanth Menon [this message]
2013-10-01 22:51 ` [lm-sensors] " Nishanth Menon
2013-10-01 22:51 ` Nishanth Menon
2013-10-02 1:32 ` Eduardo Valentin
2013-10-02 1:32 ` [lm-sensors] " Eduardo Valentin
2013-10-02 1:32 ` Eduardo Valentin
2013-10-01 18:32 ` [PATCH 7/7] arm: dts: add thermal zones info on tmp102 for DRA7-EVM Eduardo Valentin
2013-10-01 18:32 ` [lm-sensors] " Eduardo Valentin
2013-10-01 18:32 ` Eduardo Valentin
2013-10-01 22:58 ` [PATCH 0/7] DRA7: DT thermal support Nishanth Menon
2013-10-01 22:58 ` [lm-sensors] " Nishanth Menon
2013-10-01 22:58 ` Nishanth Menon
2013-10-02 1:45 ` Eduardo Valentin
2013-10-02 1:45 ` [lm-sensors] " Eduardo Valentin
2013-10-02 1:45 ` Eduardo Valentin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20131001225108.GA11885@kahuna \
--to=nm@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=eduardo.valentin@ti.com \
--cc=grant.likely@linaro.org \
--cc=ian.campbell@citrix.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=lm-sensors@lm-sensors.org \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=rob.herring@calxeda.com \
--cc=rui.zhang@intel.com \
--cc=swarren@wwwdotorg.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.