From: Maxime Ripard <maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
To: Carlo Caione <carlo-KA+7E9HrN00dnm+yROfE0A@public.gmane.org>
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org,
hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org,
emilio-0Z03zUJReD5OxF6Tv1QG9Q@public.gmane.org,
wens-jdAy2FN1RRM@public.gmane.org,
sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org,
dmitry.torokhov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
linux-input-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-doc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
boris.brezillon-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org
Subject: Re: [PATCH v4 7/9] ARM: sun7i/sun4i: dt: Add AXP209 support to various boards
Date: Mon, 14 Apr 2014 11:52:56 +0200 [thread overview]
Message-ID: <20140414095256.GA28585@lukather> (raw)
In-Reply-To: <1397209093-10077-8-git-send-email-carlo-KA+7E9HrN00dnm+yROfE0A@public.gmane.org>
[-- Attachment #1: Type: text/plain, Size: 7318 bytes --]
Hi Carlo,
On Fri, Apr 11, 2014 at 11:38:11AM +0200, Carlo Caione wrote:
> Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
> Signed-off-by: Carlo Caione <carlo-KA+7E9HrN00dnm+yROfE0A@public.gmane.org>
> ---
>
> In all the DTs the min and max microvolt allowed for each regulator are actually
> the min and max voltage possible for the regulator itself. This is not safe but
> we do not have the ranges allowed for each board and the original Allwinner
> driver does exactly this way.
>
> AXP20x has the so called Power Path Management (IPS) that can select the proper
> power supply according to the status of the external power and the Li-battery
> status. The output of the IPS block is usually a 5V fixed voltage used as
> input supply for all the other regulators. This fixed voltage is represented
> in the DT as a fixed voltage regulator in the "regulator" subnode.
>
> arch/arm/boot/dts/sun4i-a10-a1000.dts | 69 +++++++++++++++++++++++
> arch/arm/boot/dts/sun4i-a10-cubieboard.dts | 69 +++++++++++++++++++++++
> arch/arm/boot/dts/sun4i-a10-hackberry.dts | 75 +++++++++++++++++++++++++
> arch/arm/boot/dts/sun4i-a10-inet97fv2.dts | 69 +++++++++++++++++++++++
> arch/arm/boot/dts/sun4i-a10-mini-xplus.dts | 75 +++++++++++++++++++++++++
> arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts | 75 +++++++++++++++++++++++++
> arch/arm/boot/dts/sun4i-a10-pcduino.dts | 69 +++++++++++++++++++++++
> arch/arm/boot/dts/sun7i-a20-cubieboard2.dts | 70 +++++++++++++++++++++++
> arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 70 +++++++++++++++++++++++
> arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts | 70 +++++++++++++++++++++++
That looks like a lot of them. Did you test all of them?
Are all those regulators you define used on all these boards?
> 10 files changed, 711 insertions(+)
>
> diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts
> index fa746aea..029a880 100644
> --- a/arch/arm/boot/dts/sun4i-a10-a1000.dts
> +++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts
> @@ -88,6 +88,75 @@
> pinctrl-names = "default";
> pinctrl-0 = <&i2c0_pins_a>;
> status = "okay";
> + #address-cells = <1>;
> + #size-cells = <0>;
That should be in the DTSI.
> + axp209: pmic@34 {
> + compatible = "x-powers,axp209";
> + reg = <0x34>;
> + interrupts = <0>;
> +
> + interrupt-controller;
> + #interrupt-cells = <1>;
> +
> + acin-supply = <&axp_ipsout_reg>;
> + vin2-supply = <&axp_ipsout_reg>;
> + vin3-supply = <&axp_ipsout_reg>;
> + ldo24in-supply = <&axp_ipsout_reg>;
> + ldo3in-supply = <&axp_ipsout_reg>;
> + ldo5in-supply = <&axp_ipsout_reg>;
> +
> + regulators {
> + compatible = "x-powers,axp20x-reg";
I told you a few times already, but don't introduce pattern-matching
compatibles.
> +
> + x-powers,dcdc-freq = <1500>;
> +
> + axp_ipsout_reg: axp_ipsout {
> + compatible = "regulator-fixed";
> + regulator-name = "axp-ipsout";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + regulator-always-on;
> + };
> +
> + axp_vcore_reg: dcdc2 {
> + regulator-min-microvolt = <700000>;
> + regulator-max-microvolt = <2275000>;
> + regulator-always-on;
> + };
> +
> + axp_ddr_reg: dcdc3 {
> + regulator-min-microvolt = <700000>;
> + regulator-max-microvolt = <3500000>;
> + regulator-always-on;
> + };
> +
> + axp_rtc_reg: ldo1 {
> + regulator-always-on;
> + };
> +
> + axp_analog_reg: ldo2 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> + axp_pll_reg: ldo3 {
> + regulator-min-microvolt = <700000>;
> + regulator-max-microvolt = <3500000>;
> + };
> +
> + axp_hdmi_reg: ldo4 {
> + regulator-min-microvolt = <1250000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + axp_mic_reg: ldo5 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + };
> + };
> + };
> };
> };
>
> diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
> index 4684cbe..635fd4b 100644
> --- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
> +++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
> @@ -80,6 +80,75 @@
> pinctrl-names = "default";
> pinctrl-0 = <&i2c0_pins_a>;
> status = "okay";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + axp209: pmic@34 {
> + compatible = "x-powers,axp209";
> + reg = <0x34>;
> + interrupts = <0>;
> +
> + interrupt-controller;
> + #interrupt-cells = <1>;
> +
> + acin-supply = <&axp_ipsout_reg>;
> + vin2-supply = <&axp_ipsout_reg>;
> + vin3-supply = <&axp_ipsout_reg>;
> + ldo24in-supply = <&axp_ipsout_reg>;
> + ldo3in-supply = <&axp_ipsout_reg>;
> + ldo5in-supply = <&axp_ipsout_reg>;
> +
> + regulators {
> + compatible = "x-powers,axp20x-reg";
> +
> + x-powers,dcdc-freq = <1500>;
> +
> + axp_ipsout_reg: axp_ipsout {
> + compatible = "regulator-fixed";
> + regulator-name = "axp-ipsout";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + regulator-always-on;
> + };
> +
> + axp_vcore_reg: dcdc2 {
> + regulator-min-microvolt = <700000>;
> + regulator-max-microvolt = <2275000>;
> + regulator-always-on;
> + };
> +
> + axp_ddr_reg: dcdc3 {
> + regulator-min-microvolt = <700000>;
> + regulator-max-microvolt = <3500000>;
> + regulator-always-on;
> + };
> +
> + axp_rtc_reg: ldo1 {
> + regulator-always-on;
> + };
> +
> + axp_analog_reg: ldo2 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> + axp_pll_reg: ldo3 {
> + regulator-min-microvolt = <700000>;
> + regulator-max-microvolt = <3500000>;
> + };
> +
> + axp_hdmi_reg: ldo4 {
> + regulator-min-microvolt = <1250000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + axp_mic_reg: ldo5 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + };
> + };
> + };
> };
>
> i2c1: i2c@01c2b000 {
> diff --git a/arch/arm/boot/dts/sun4i-a10-hackberry.dts b/arch/arm/boot/dts/sun4i-a10-hackberry.dts
> index d7c17e4..8f2db9c 100644
> --- a/arch/arm/boot/dts/sun4i-a10-hackberry.dts
> +++ b/arch/arm/boot/dts/sun4i-a10-hackberry.dts
> @@ -82,6 +82,81 @@
> pinctrl-0 = <&uart0_pins_a>;
> status = "okay";
> };
> +
> + i2c0: i2c@01c2ac00 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c0_pins_a>;
> + status = "okay";
That should be in a separate patch.
These comments apply to most of the changes here. Make sure you edit
all of them.
Thanks!
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]
WARNING: multiple messages have this Message-ID (diff)
From: maxime.ripard@free-electrons.com (Maxime Ripard)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 7/9] ARM: sun7i/sun4i: dt: Add AXP209 support to various boards
Date: Mon, 14 Apr 2014 11:52:56 +0200 [thread overview]
Message-ID: <20140414095256.GA28585@lukather> (raw)
In-Reply-To: <1397209093-10077-8-git-send-email-carlo@caione.org>
Hi Carlo,
On Fri, Apr 11, 2014 at 11:38:11AM +0200, Carlo Caione wrote:
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> Signed-off-by: Carlo Caione <carlo@caione.org>
> ---
>
> In all the DTs the min and max microvolt allowed for each regulator are actually
> the min and max voltage possible for the regulator itself. This is not safe but
> we do not have the ranges allowed for each board and the original Allwinner
> driver does exactly this way.
>
> AXP20x has the so called Power Path Management (IPS) that can select the proper
> power supply according to the status of the external power and the Li-battery
> status. The output of the IPS block is usually a 5V fixed voltage used as
> input supply for all the other regulators. This fixed voltage is represented
> in the DT as a fixed voltage regulator in the "regulator" subnode.
>
> arch/arm/boot/dts/sun4i-a10-a1000.dts | 69 +++++++++++++++++++++++
> arch/arm/boot/dts/sun4i-a10-cubieboard.dts | 69 +++++++++++++++++++++++
> arch/arm/boot/dts/sun4i-a10-hackberry.dts | 75 +++++++++++++++++++++++++
> arch/arm/boot/dts/sun4i-a10-inet97fv2.dts | 69 +++++++++++++++++++++++
> arch/arm/boot/dts/sun4i-a10-mini-xplus.dts | 75 +++++++++++++++++++++++++
> arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts | 75 +++++++++++++++++++++++++
> arch/arm/boot/dts/sun4i-a10-pcduino.dts | 69 +++++++++++++++++++++++
> arch/arm/boot/dts/sun7i-a20-cubieboard2.dts | 70 +++++++++++++++++++++++
> arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 70 +++++++++++++++++++++++
> arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts | 70 +++++++++++++++++++++++
That looks like a lot of them. Did you test all of them?
Are all those regulators you define used on all these boards?
> 10 files changed, 711 insertions(+)
>
> diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts
> index fa746aea..029a880 100644
> --- a/arch/arm/boot/dts/sun4i-a10-a1000.dts
> +++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts
> @@ -88,6 +88,75 @@
> pinctrl-names = "default";
> pinctrl-0 = <&i2c0_pins_a>;
> status = "okay";
> + #address-cells = <1>;
> + #size-cells = <0>;
That should be in the DTSI.
> + axp209: pmic at 34 {
> + compatible = "x-powers,axp209";
> + reg = <0x34>;
> + interrupts = <0>;
> +
> + interrupt-controller;
> + #interrupt-cells = <1>;
> +
> + acin-supply = <&axp_ipsout_reg>;
> + vin2-supply = <&axp_ipsout_reg>;
> + vin3-supply = <&axp_ipsout_reg>;
> + ldo24in-supply = <&axp_ipsout_reg>;
> + ldo3in-supply = <&axp_ipsout_reg>;
> + ldo5in-supply = <&axp_ipsout_reg>;
> +
> + regulators {
> + compatible = "x-powers,axp20x-reg";
I told you a few times already, but don't introduce pattern-matching
compatibles.
> +
> + x-powers,dcdc-freq = <1500>;
> +
> + axp_ipsout_reg: axp_ipsout {
> + compatible = "regulator-fixed";
> + regulator-name = "axp-ipsout";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + regulator-always-on;
> + };
> +
> + axp_vcore_reg: dcdc2 {
> + regulator-min-microvolt = <700000>;
> + regulator-max-microvolt = <2275000>;
> + regulator-always-on;
> + };
> +
> + axp_ddr_reg: dcdc3 {
> + regulator-min-microvolt = <700000>;
> + regulator-max-microvolt = <3500000>;
> + regulator-always-on;
> + };
> +
> + axp_rtc_reg: ldo1 {
> + regulator-always-on;
> + };
> +
> + axp_analog_reg: ldo2 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> + axp_pll_reg: ldo3 {
> + regulator-min-microvolt = <700000>;
> + regulator-max-microvolt = <3500000>;
> + };
> +
> + axp_hdmi_reg: ldo4 {
> + regulator-min-microvolt = <1250000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + axp_mic_reg: ldo5 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + };
> + };
> + };
> };
> };
>
> diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
> index 4684cbe..635fd4b 100644
> --- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
> +++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
> @@ -80,6 +80,75 @@
> pinctrl-names = "default";
> pinctrl-0 = <&i2c0_pins_a>;
> status = "okay";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + axp209: pmic at 34 {
> + compatible = "x-powers,axp209";
> + reg = <0x34>;
> + interrupts = <0>;
> +
> + interrupt-controller;
> + #interrupt-cells = <1>;
> +
> + acin-supply = <&axp_ipsout_reg>;
> + vin2-supply = <&axp_ipsout_reg>;
> + vin3-supply = <&axp_ipsout_reg>;
> + ldo24in-supply = <&axp_ipsout_reg>;
> + ldo3in-supply = <&axp_ipsout_reg>;
> + ldo5in-supply = <&axp_ipsout_reg>;
> +
> + regulators {
> + compatible = "x-powers,axp20x-reg";
> +
> + x-powers,dcdc-freq = <1500>;
> +
> + axp_ipsout_reg: axp_ipsout {
> + compatible = "regulator-fixed";
> + regulator-name = "axp-ipsout";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + regulator-always-on;
> + };
> +
> + axp_vcore_reg: dcdc2 {
> + regulator-min-microvolt = <700000>;
> + regulator-max-microvolt = <2275000>;
> + regulator-always-on;
> + };
> +
> + axp_ddr_reg: dcdc3 {
> + regulator-min-microvolt = <700000>;
> + regulator-max-microvolt = <3500000>;
> + regulator-always-on;
> + };
> +
> + axp_rtc_reg: ldo1 {
> + regulator-always-on;
> + };
> +
> + axp_analog_reg: ldo2 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> + axp_pll_reg: ldo3 {
> + regulator-min-microvolt = <700000>;
> + regulator-max-microvolt = <3500000>;
> + };
> +
> + axp_hdmi_reg: ldo4 {
> + regulator-min-microvolt = <1250000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + axp_mic_reg: ldo5 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + };
> + };
> + };
> };
>
> i2c1: i2c at 01c2b000 {
> diff --git a/arch/arm/boot/dts/sun4i-a10-hackberry.dts b/arch/arm/boot/dts/sun4i-a10-hackberry.dts
> index d7c17e4..8f2db9c 100644
> --- a/arch/arm/boot/dts/sun4i-a10-hackberry.dts
> +++ b/arch/arm/boot/dts/sun4i-a10-hackberry.dts
> @@ -82,6 +82,81 @@
> pinctrl-0 = <&uart0_pins_a>;
> status = "okay";
> };
> +
> + i2c0: i2c at 01c2ac00 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c0_pins_a>;
> + status = "okay";
That should be in a separate patch.
These comments apply to most of the changes here. Make sure you edit
all of them.
Thanks!
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140414/8e5946b5/attachment.sig>
next prev parent reply other threads:[~2014-04-14 9:52 UTC|newest]
Thread overview: 74+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-11 9:38 [PATCH v4 0/9] mfd: AXP20x: Add support for AXP202 and AXP209 Carlo Caione
2014-04-11 9:38 ` Carlo Caione
[not found] ` <1397209093-10077-1-git-send-email-carlo-KA+7E9HrN00dnm+yROfE0A@public.gmane.org>
2014-04-11 9:38 ` [PATCH v4 1/9] mfd: AXP20x: Add mfd driver for AXP20x PMIC Carlo Caione
2014-04-11 9:38 ` Carlo Caione
[not found] ` <1397209093-10077-2-git-send-email-carlo-KA+7E9HrN00dnm+yROfE0A@public.gmane.org>
2014-04-11 11:25 ` Arnd Bergmann
2014-04-11 11:25 ` Arnd Bergmann
2014-04-11 12:03 ` [linux-sunxi] " Carlo Caione
2014-04-11 12:03 ` Carlo Caione
2014-04-11 12:09 ` Mark Brown
2014-04-11 12:09 ` Mark Brown
[not found] ` <20140411120908.GC28800-GFdadSzt00ze9xe1eoZjHA@public.gmane.org>
2014-04-11 13:16 ` Arnd Bergmann
2014-04-11 13:16 ` Arnd Bergmann
2014-04-16 15:43 ` Lee Jones
2014-04-16 15:43 ` Lee Jones
2014-04-16 15:44 ` Lee Jones
2014-04-16 15:44 ` Lee Jones
2014-04-11 9:38 ` [PATCH v4 2/9] dt-bindings: add vendor-prefix for X-Powers Carlo Caione
2014-04-11 9:38 ` Carlo Caione
2014-04-11 9:38 ` [PATCH v4 3/9] mfd: AXP20x: Add bindings documentation Carlo Caione
2014-04-11 9:38 ` Carlo Caione
2014-04-11 9:38 ` [PATCH v4 4/9] input: misc: Add driver for AXP20x Power Enable Key Carlo Caione
2014-04-11 9:38 ` Carlo Caione
[not found] ` <1397209093-10077-5-git-send-email-carlo-KA+7E9HrN00dnm+yROfE0A@public.gmane.org>
2014-04-13 8:17 ` Dmitry Torokhov
2014-04-13 8:17 ` Dmitry Torokhov
2014-04-17 12:07 ` [linux-sunxi] " Carlo Caione
2014-04-17 12:07 ` Carlo Caione
2014-04-11 9:38 ` [PATCH v4 5/9] input: misc: Add ABI docs for AXP20x PEK Carlo Caione
2014-04-11 9:38 ` Carlo Caione
2014-04-11 9:38 ` [PATCH v4 6/9] regulator: AXP20x: Add support for regulators subsystem Carlo Caione
2014-04-11 9:38 ` Carlo Caione
[not found] ` <1397209093-10077-7-git-send-email-carlo-KA+7E9HrN00dnm+yROfE0A@public.gmane.org>
2014-04-11 12:23 ` Mark Brown
2014-04-11 12:23 ` Mark Brown
2014-04-11 12:29 ` [linux-sunxi] " Carlo Caione
2014-04-11 12:29 ` Carlo Caione
2014-05-15 18:03 ` Boris BREZILLON
2014-05-15 18:03 ` Boris BREZILLON
[not found] ` <5375015A.10701-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
2014-05-15 18:18 ` Mark Brown
2014-05-15 18:18 ` Mark Brown
2014-05-16 7:40 ` Carlo Caione
2014-05-16 7:40 ` [linux-sunxi] " Carlo Caione
2014-04-11 9:38 ` [PATCH v4 7/9] ARM: sun7i/sun4i: dt: Add AXP209 support to various boards Carlo Caione
2014-04-11 9:38 ` Carlo Caione
[not found] ` <1397209093-10077-8-git-send-email-carlo-KA+7E9HrN00dnm+yROfE0A@public.gmane.org>
2014-04-11 12:29 ` Mark Brown
2014-04-11 12:29 ` Mark Brown
2014-04-11 13:04 ` Carlo Caione
2014-04-11 13:04 ` Carlo Caione
[not found] ` <CAOQ7t2Y2B7f+eZApDHKiKm9=bOXo6oUA2RLY7ENn7qPLQEboMA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-04-11 16:18 ` Mark Brown
2014-04-11 16:18 ` Mark Brown
[not found] ` <20140411161813.GF28800-GFdadSzt00ze9xe1eoZjHA@public.gmane.org>
2014-04-17 10:06 ` Carlo Caione
2014-04-17 10:06 ` Carlo Caione
[not found] ` <CAOQ7t2YO_MjUZkkoEe1Grft+fVttWoOro85Sru2P3LXbx8Kjbg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-04-18 15:15 ` Mark Brown
2014-04-18 15:15 ` Mark Brown
[not found] ` <20140418151551.GZ12304-GFdadSzt00ze9xe1eoZjHA@public.gmane.org>
2014-04-23 20:25 ` Carlo Caione
2014-04-23 20:25 ` Carlo Caione
[not found] ` <20140423202546.GA3890-OP/Sd6KM9CusbfqNwF1Yyl6hYfS7NtTn@public.gmane.org>
2014-04-24 13:30 ` Mark Brown
2014-04-24 13:30 ` Mark Brown
2014-04-24 16:35 ` Charles Keepax
2014-04-24 16:35 ` Charles Keepax
[not found] ` <20140424163523.GB25663-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>
2014-04-24 16:58 ` Charles Keepax
2014-04-24 16:58 ` Charles Keepax
[not found] ` <20140424165847.GC25663-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>
2014-04-24 17:12 ` Mark Brown
2014-04-24 17:12 ` Mark Brown
2014-04-14 9:52 ` Maxime Ripard [this message]
2014-04-14 9:52 ` Maxime Ripard
2014-04-14 10:02 ` Carlo Caione
2014-04-14 10:02 ` [linux-sunxi] " Carlo Caione
[not found] ` <CAOQ7t2ZybF=dm-NBQ3niN7gb-Asgwz5CW-VSkOzWR6t2NCaA8w-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-04-14 10:20 ` Hans de Goede
2014-04-14 10:20 ` [linux-sunxi] " Hans de Goede
[not found] ` <534BB670.8030102-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2014-04-14 11:16 ` Mark Brown
2014-04-14 11:16 ` [linux-sunxi] " Mark Brown
2014-04-11 9:38 ` [PATCH v4 8/9] ARM: sunxi: Add AXP20x support in defconfig Carlo Caione
2014-04-11 9:38 ` Carlo Caione
2014-04-11 9:38 ` [PATCH v4 9/9] ARM: sunxi: Add AXP20x support multi_v7_defconfig Carlo Caione
2014-04-11 9:38 ` Carlo Caione
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140414095256.GA28585@lukather \
--to=maxime.ripard-wi1+55scjutkeb57/3fjtnbpr1lh4cv8@public.gmane.org \
--cc=boris.brezillon-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org \
--cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=carlo-KA+7E9HrN00dnm+yROfE0A@public.gmane.org \
--cc=dmitry.torokhov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=emilio-0Z03zUJReD5OxF6Tv1QG9Q@public.gmane.org \
--cc=hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
--cc=lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-doc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-input-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org \
--cc=sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org \
--cc=wens-jdAy2FN1RRM@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.