From: Lee Jones <lee.jones@linaro.org> To: Stanimir Varbanov <svarbanov@mm-sol.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>, Pawel Moll <pawel.moll@arm.com>, Rob Herring <robh+dt@kernel.org>, Kumar Gala <galak@codeaurora.org>, Mark Rutland <mark.rutland@arm.com>, Grant Likely <grant.likely@linaro.org>, Samuel Ortiz <sameo@linux.intel.com>, linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, Courtney Cavin <courtney.cavin@sonymobile.com>, Bjorn Andersson <bjorn.andersson@sonymobile.com>, Josh Cartwright <joshc@codeaurora.org>, Stephen Boyd <sboyd@codeaurora.org>, David Collins <collinsd@codeaurora.org> Subject: Re: [PATCH v4 1/3] mfd: add support for Qualcomm SPMI PMICs Date: Wed, 24 Sep 2014 10:12:50 +0100 [thread overview] Message-ID: <20140924091250.GK17801@lee--X1> (raw) In-Reply-To: <1406903450-27283-2-git-send-email-svarbanov@mm-sol.com> On Fri, 01 Aug 2014, Stanimir Varbanov wrote: > From: Josh Cartwright <joshc@codeaurora.org> > > The Qualcomm SPMI PMIC chips are components used with the > Snapdragon 800 series SoC family. This driver exists > largely as a glue mfd component, it exists to be an owner > of an SPMI regmap for children devices described in > device tree. > > Signed-off-by: Josh Cartwright <joshc@codeaurora.org> > Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com> > Acked-by: Lee Jones <lee.jones@linaro.org> > --- > drivers/mfd/Kconfig | 15 +++++++++ > drivers/mfd/Makefile | 1 + > drivers/mfd/qcom-spmi-pmic.c | 67 ++++++++++++++++++++++++++++++++++++++++++ > 3 files changed, 83 insertions(+), 0 deletions(-) > create mode 100644 drivers/mfd/qcom-spmi-pmic.c Applied, thanks. > diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig > index 6cc4b6a..abfe12a 100644 > --- a/drivers/mfd/Kconfig > +++ b/drivers/mfd/Kconfig > @@ -524,6 +524,21 @@ config MFD_PM8921_CORE > Say M here if you want to include support for PM8921 chip as a module. > This will build a module called "pm8921-core". > > +config MFD_SPMI_PMIC > + tristate "Qualcomm SPMI PMICs" > + depends on ARCH_QCOM || COMPILE_TEST > + depends on OF > + depends on SPMI > + select REGMAP_SPMI > + help > + This enables support for the Qualcomm SPMI PMICs. > + These PMICs are currently used with the Snapdragon 800 series of > + SoCs. Note, that this will only be useful paired with descriptions > + of the independent functions as children nodes in the device tree. > + > + Say M here if you want to include support for the SPMI PMIC > + series as a module. The module will be called "qcom-spmi-pmic". > + > config MFD_RDC321X > tristate "RDC R-321x southbridge" > select MFD_CORE > diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile > index 8afedba..0e7f32e 100644 > --- a/drivers/mfd/Makefile > +++ b/drivers/mfd/Makefile > @@ -153,6 +153,7 @@ obj-$(CONFIG_MFD_SI476X_CORE) += si476x-core.o > obj-$(CONFIG_MFD_CS5535) += cs5535-mfd.o > obj-$(CONFIG_MFD_OMAP_USB_HOST) += omap-usb-host.o omap-usb-tll.o > obj-$(CONFIG_MFD_PM8921_CORE) += pm8921-core.o ssbi.o > +obj-$(CONFIG_MFD_SPMI_PMIC) += qcom-spmi-pmic.o > obj-$(CONFIG_TPS65911_COMPARATOR) += tps65911-comparator.o > obj-$(CONFIG_MFD_TPS65090) += tps65090.o > obj-$(CONFIG_MFD_AAT2870_CORE) += aat2870-core.o > diff --git a/drivers/mfd/qcom-spmi-pmic.c b/drivers/mfd/qcom-spmi-pmic.c > new file mode 100644 > index 0000000..4b8beb2 > --- /dev/null > +++ b/drivers/mfd/qcom-spmi-pmic.c > @@ -0,0 +1,67 @@ > +/* > + * Copyright (c) 2014, The Linux Foundation. All rights reserved. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 and > + * only version 2 as published by the Free Software Foundation. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + */ > + > +#include <linux/kernel.h> > +#include <linux/module.h> > +#include <linux/spmi.h> > +#include <linux/regmap.h> > +#include <linux/of_platform.h> > + > +static const struct regmap_config spmi_regmap_config = { > + .reg_bits = 16, > + .val_bits = 8, > + .max_register = 0xffff, > + .fast_io = true, > +}; > + > +static int pmic_spmi_probe(struct spmi_device *sdev) > +{ > + struct device_node *root = sdev->dev.of_node; > + struct regmap *regmap; > + > + regmap = devm_regmap_init_spmi_ext(sdev, &spmi_regmap_config); > + if (IS_ERR(regmap)) > + return PTR_ERR(regmap); > + > + return of_platform_populate(root, NULL, NULL, &sdev->dev); > +} > + > +static void pmic_spmi_remove(struct spmi_device *sdev) > +{ > + of_platform_depopulate(&sdev->dev); > +} > + > +static const struct of_device_id pmic_spmi_id_table[] = { > + { .compatible = "qcom,spmi-pmic" }, > + { .compatible = "qcom,pm8941" }, > + { .compatible = "qcom,pm8841" }, > + { .compatible = "qcom,pma8084" }, > + { } > +}; > +MODULE_DEVICE_TABLE(of, pmic_spmi_id_table); > + > +static struct spmi_driver pmic_spmi_driver = { > + .probe = pmic_spmi_probe, > + .remove = pmic_spmi_remove, > + .driver = { > + .name = "pmic-spmi", > + .of_match_table = pmic_spmi_id_table, > + }, > +}; > +module_spmi_driver(pmic_spmi_driver); > + > +MODULE_DESCRIPTION("Qualcomm SPMI PMIC driver"); > +MODULE_ALIAS("spmi:spmi-pmic"); > +MODULE_LICENSE("GPL v2"); > +MODULE_AUTHOR("Josh Cartwright <joshc@codeaurora.org>"); > +MODULE_AUTHOR("Stanimir Varbanov <svarbanov@mm-sol.com>"); -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog
WARNING: multiple messages have this Message-ID (diff)
From: lee.jones@linaro.org (Lee Jones) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v4 1/3] mfd: add support for Qualcomm SPMI PMICs Date: Wed, 24 Sep 2014 10:12:50 +0100 [thread overview] Message-ID: <20140924091250.GK17801@lee--X1> (raw) In-Reply-To: <1406903450-27283-2-git-send-email-svarbanov@mm-sol.com> On Fri, 01 Aug 2014, Stanimir Varbanov wrote: > From: Josh Cartwright <joshc@codeaurora.org> > > The Qualcomm SPMI PMIC chips are components used with the > Snapdragon 800 series SoC family. This driver exists > largely as a glue mfd component, it exists to be an owner > of an SPMI regmap for children devices described in > device tree. > > Signed-off-by: Josh Cartwright <joshc@codeaurora.org> > Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com> > Acked-by: Lee Jones <lee.jones@linaro.org> > --- > drivers/mfd/Kconfig | 15 +++++++++ > drivers/mfd/Makefile | 1 + > drivers/mfd/qcom-spmi-pmic.c | 67 ++++++++++++++++++++++++++++++++++++++++++ > 3 files changed, 83 insertions(+), 0 deletions(-) > create mode 100644 drivers/mfd/qcom-spmi-pmic.c Applied, thanks. > diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig > index 6cc4b6a..abfe12a 100644 > --- a/drivers/mfd/Kconfig > +++ b/drivers/mfd/Kconfig > @@ -524,6 +524,21 @@ config MFD_PM8921_CORE > Say M here if you want to include support for PM8921 chip as a module. > This will build a module called "pm8921-core". > > +config MFD_SPMI_PMIC > + tristate "Qualcomm SPMI PMICs" > + depends on ARCH_QCOM || COMPILE_TEST > + depends on OF > + depends on SPMI > + select REGMAP_SPMI > + help > + This enables support for the Qualcomm SPMI PMICs. > + These PMICs are currently used with the Snapdragon 800 series of > + SoCs. Note, that this will only be useful paired with descriptions > + of the independent functions as children nodes in the device tree. > + > + Say M here if you want to include support for the SPMI PMIC > + series as a module. The module will be called "qcom-spmi-pmic". > + > config MFD_RDC321X > tristate "RDC R-321x southbridge" > select MFD_CORE > diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile > index 8afedba..0e7f32e 100644 > --- a/drivers/mfd/Makefile > +++ b/drivers/mfd/Makefile > @@ -153,6 +153,7 @@ obj-$(CONFIG_MFD_SI476X_CORE) += si476x-core.o > obj-$(CONFIG_MFD_CS5535) += cs5535-mfd.o > obj-$(CONFIG_MFD_OMAP_USB_HOST) += omap-usb-host.o omap-usb-tll.o > obj-$(CONFIG_MFD_PM8921_CORE) += pm8921-core.o ssbi.o > +obj-$(CONFIG_MFD_SPMI_PMIC) += qcom-spmi-pmic.o > obj-$(CONFIG_TPS65911_COMPARATOR) += tps65911-comparator.o > obj-$(CONFIG_MFD_TPS65090) += tps65090.o > obj-$(CONFIG_MFD_AAT2870_CORE) += aat2870-core.o > diff --git a/drivers/mfd/qcom-spmi-pmic.c b/drivers/mfd/qcom-spmi-pmic.c > new file mode 100644 > index 0000000..4b8beb2 > --- /dev/null > +++ b/drivers/mfd/qcom-spmi-pmic.c > @@ -0,0 +1,67 @@ > +/* > + * Copyright (c) 2014, The Linux Foundation. All rights reserved. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 and > + * only version 2 as published by the Free Software Foundation. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + */ > + > +#include <linux/kernel.h> > +#include <linux/module.h> > +#include <linux/spmi.h> > +#include <linux/regmap.h> > +#include <linux/of_platform.h> > + > +static const struct regmap_config spmi_regmap_config = { > + .reg_bits = 16, > + .val_bits = 8, > + .max_register = 0xffff, > + .fast_io = true, > +}; > + > +static int pmic_spmi_probe(struct spmi_device *sdev) > +{ > + struct device_node *root = sdev->dev.of_node; > + struct regmap *regmap; > + > + regmap = devm_regmap_init_spmi_ext(sdev, &spmi_regmap_config); > + if (IS_ERR(regmap)) > + return PTR_ERR(regmap); > + > + return of_platform_populate(root, NULL, NULL, &sdev->dev); > +} > + > +static void pmic_spmi_remove(struct spmi_device *sdev) > +{ > + of_platform_depopulate(&sdev->dev); > +} > + > +static const struct of_device_id pmic_spmi_id_table[] = { > + { .compatible = "qcom,spmi-pmic" }, > + { .compatible = "qcom,pm8941" }, > + { .compatible = "qcom,pm8841" }, > + { .compatible = "qcom,pma8084" }, > + { } > +}; > +MODULE_DEVICE_TABLE(of, pmic_spmi_id_table); > + > +static struct spmi_driver pmic_spmi_driver = { > + .probe = pmic_spmi_probe, > + .remove = pmic_spmi_remove, > + .driver = { > + .name = "pmic-spmi", > + .of_match_table = pmic_spmi_id_table, > + }, > +}; > +module_spmi_driver(pmic_spmi_driver); > + > +MODULE_DESCRIPTION("Qualcomm SPMI PMIC driver"); > +MODULE_ALIAS("spmi:spmi-pmic"); > +MODULE_LICENSE("GPL v2"); > +MODULE_AUTHOR("Josh Cartwright <joshc@codeaurora.org>"); > +MODULE_AUTHOR("Stanimir Varbanov <svarbanov@mm-sol.com>"); -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org ? Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog
next prev parent reply other threads:[~2014-09-24 9:12 UTC|newest] Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top 2014-08-01 14:30 [PATCH v4 0/3] Support for Qualcomm QPNP PMIC's Stanimir Varbanov 2014-08-01 14:30 ` Stanimir Varbanov 2014-08-01 14:30 ` [PATCH v4 1/3] mfd: add support for Qualcomm SPMI PMICs Stanimir Varbanov 2014-08-01 14:30 ` Stanimir Varbanov 2014-09-24 9:12 ` Lee Jones [this message] 2014-09-24 9:12 ` Lee Jones [not found] ` <1406903450-27283-1-git-send-email-svarbanov-NEYub+7Iv8PQT0dZR+AlfA@public.gmane.org> 2014-08-01 14:30 ` [PATCH v4 2/3] mfd: document DT bindings " Stanimir Varbanov 2014-08-01 14:30 ` Stanimir Varbanov 2014-08-01 14:30 ` Stanimir Varbanov 2014-08-04 13:51 ` Stanimir Varbanov 2014-08-04 13:51 ` Stanimir Varbanov 2014-09-24 9:14 ` Lee Jones 2014-09-24 9:14 ` Lee Jones 2014-08-01 14:30 ` [PATCH v4 3/3] ARM: dts: qcom: add pm8941 and pm8841 PMICs device nodes Stanimir Varbanov 2014-08-01 14:30 ` Stanimir Varbanov 2014-08-01 14:30 ` Stanimir Varbanov 2014-08-05 7:20 ` [PATCH v4 0/3] Support for Qualcomm QPNP PMIC's Pramod Gurav 2014-08-05 7:20 ` Pramod Gurav 2014-08-05 12:00 ` Stanimir Varbanov 2014-08-05 12:00 ` Stanimir Varbanov 2014-09-23 12:33 ` Stanimir Varbanov 2014-09-23 12:33 ` Stanimir Varbanov
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20140924091250.GK17801@lee--X1 \ --to=lee.jones@linaro.org \ --cc=bjorn.andersson@sonymobile.com \ --cc=collinsd@codeaurora.org \ --cc=courtney.cavin@sonymobile.com \ --cc=devicetree@vger.kernel.org \ --cc=galak@codeaurora.org \ --cc=grant.likely@linaro.org \ --cc=ijc+devicetree@hellion.org.uk \ --cc=joshc@codeaurora.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-arm-msm@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=mark.rutland@arm.com \ --cc=pawel.moll@arm.com \ --cc=robh+dt@kernel.org \ --cc=sameo@linux.intel.com \ --cc=sboyd@codeaurora.org \ --cc=svarbanov@mm-sol.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.