From: Maxime Ripard <maxime.ripard@free-electrons.com> To: Chen-Yu Tsai <wens@csie.org> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>, Zhang Rui <rui.zhang@intel.com>, Eduardo Valentin <edubezval@gmail.com>, Hans de Goede <hdegoede@redhat.com>, linux-input@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-pm@vger.kernel.org Subject: Re: [PATCH 08/17] ARM: dts: sun7i: cubieboard2: add axp209 regulator nodes Date: Tue, 6 Jan 2015 17:11:02 +0100 [thread overview] Message-ID: <20150106161102.GV7853@lukather> (raw) In-Reply-To: <1420511727-8242-9-git-send-email-wens@csie.org> [-- Attachment #1: Type: text/plain, Size: 2259 bytes --] Hi, On Tue, Jan 06, 2015 at 10:35:18AM +0800, Chen-Yu Tsai wrote: > This patch adds the regulator nodes for the axp209 by including > the axp209 dtsi. As the inputs of these regulators are from the > axp209's PS output, which is basically just a mux over the 2 > inputs, it is considered to be unregulated. Thus we do not provide > input supply properties for them. > > The regulator names and constraints are based on the board > schematics and the SoC datasheet. > > DCDC2 is used as the cpu power supply. This patch also references > it from the cpu node. > > Also get rid of axp209 properties already set in axp209.dtsi. > > Signed-off-by: Chen-Yu Tsai <wens@csie.org> > --- > arch/arm/boot/dts/axp209.dtsi | 4 ++++ > arch/arm/boot/dts/sun7i-a20-cubieboard2.dts | 35 +++++++++++++++++++++++++---- > 2 files changed, 35 insertions(+), 4 deletions(-) > > diff --git a/arch/arm/boot/dts/axp209.dtsi b/arch/arm/boot/dts/axp209.dtsi > index 3c38cbafe285..fec3364b2110 100644 > --- a/arch/arm/boot/dts/axp209.dtsi > +++ b/arch/arm/boot/dts/axp209.dtsi > @@ -54,6 +54,10 @@ > */ > > &axp209 { > + compatible = "x-powers,axp209"; > + interrupt-controller; > + #interrupt-cells = <1>; > + This should be in your patch adding the AXP DTSI. > regulators { > /* Default work frequency for buck regulators */ > x-powers,dcdc-freq = <1500>; > diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts > index 53680983461a..61e61c0eb829 100644 > --- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts > +++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts > @@ -84,13 +84,9 @@ > status = "okay"; > > axp209: pmic@34 { > - compatible = "x-powers,axp209"; > reg = <0x34>; > interrupt-parent = <&nmi_intc>; > interrupts = <0 8>; > - > - interrupt-controller; > - #interrupt-cells = <1>; > }; > }; > > @@ -141,3 +137,34 @@ > status = "okay"; > }; > }; > + > +/include/ "axp209.dtsi" We've switched to preprocessor includes, please use them instead. Thanks! Maxime -- Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com [-- Attachment #2: Digital signature --] [-- Type: application/pgp-signature, Size: 819 bytes --]
WARNING: multiple messages have this Message-ID (diff)
From: maxime.ripard@free-electrons.com (Maxime Ripard) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 08/17] ARM: dts: sun7i: cubieboard2: add axp209 regulator nodes Date: Tue, 6 Jan 2015 17:11:02 +0100 [thread overview] Message-ID: <20150106161102.GV7853@lukather> (raw) In-Reply-To: <1420511727-8242-9-git-send-email-wens@csie.org> Hi, On Tue, Jan 06, 2015 at 10:35:18AM +0800, Chen-Yu Tsai wrote: > This patch adds the regulator nodes for the axp209 by including > the axp209 dtsi. As the inputs of these regulators are from the > axp209's PS output, which is basically just a mux over the 2 > inputs, it is considered to be unregulated. Thus we do not provide > input supply properties for them. > > The regulator names and constraints are based on the board > schematics and the SoC datasheet. > > DCDC2 is used as the cpu power supply. This patch also references > it from the cpu node. > > Also get rid of axp209 properties already set in axp209.dtsi. > > Signed-off-by: Chen-Yu Tsai <wens@csie.org> > --- > arch/arm/boot/dts/axp209.dtsi | 4 ++++ > arch/arm/boot/dts/sun7i-a20-cubieboard2.dts | 35 +++++++++++++++++++++++++---- > 2 files changed, 35 insertions(+), 4 deletions(-) > > diff --git a/arch/arm/boot/dts/axp209.dtsi b/arch/arm/boot/dts/axp209.dtsi > index 3c38cbafe285..fec3364b2110 100644 > --- a/arch/arm/boot/dts/axp209.dtsi > +++ b/arch/arm/boot/dts/axp209.dtsi > @@ -54,6 +54,10 @@ > */ > > &axp209 { > + compatible = "x-powers,axp209"; > + interrupt-controller; > + #interrupt-cells = <1>; > + This should be in your patch adding the AXP DTSI. > regulators { > /* Default work frequency for buck regulators */ > x-powers,dcdc-freq = <1500>; > diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts > index 53680983461a..61e61c0eb829 100644 > --- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts > +++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts > @@ -84,13 +84,9 @@ > status = "okay"; > > axp209: pmic at 34 { > - compatible = "x-powers,axp209"; > reg = <0x34>; > interrupt-parent = <&nmi_intc>; > interrupts = <0 8>; > - > - interrupt-controller; > - #interrupt-cells = <1>; > }; > }; > > @@ -141,3 +137,34 @@ > status = "okay"; > }; > }; > + > +/include/ "axp209.dtsi" We've switched to preprocessor includes, please use them instead. Thanks! Maxime -- Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20150106/c2eb17ee/attachment.sig>
next prev parent reply other threads:[~2015-01-06 16:11 UTC|newest] Thread overview: 82+ messages / expand[flat|nested] mbox.gz Atom feed top 2015-01-06 2:35 [PATCH 00/17] ARM: sunxi: Support cpufreq on sun[457]i Chen-Yu Tsai 2015-01-06 2:35 ` Chen-Yu Tsai 2015-01-06 2:35 ` [PATCH 01/17] ARM: sunxi: Register cpufreq-dt for sun[45678]i Chen-Yu Tsai 2015-01-06 2:35 ` Chen-Yu Tsai 2015-01-06 15:55 ` Maxime Ripard 2015-01-06 15:55 ` Maxime Ripard 2015-01-07 9:07 ` Chen-Yu Tsai 2015-01-07 9:07 ` Chen-Yu Tsai 2015-01-07 10:01 ` Viresh Kumar 2015-01-07 10:01 ` Viresh Kumar 2015-01-07 10:23 ` Maxime Ripard 2015-01-07 10:23 ` Maxime Ripard 2015-01-06 2:35 ` [PATCH 02/17] clk: sunxi: Propagate rate changes to parent for mux clocks Chen-Yu Tsai 2015-01-06 2:35 ` Chen-Yu Tsai 2015-01-06 16:00 ` Maxime Ripard 2015-01-06 16:00 ` Maxime Ripard 2015-01-06 2:35 ` [PATCH 03/17] Input: sun4i-ts: Add thermal zone sensor support Chen-Yu Tsai 2015-01-06 2:35 ` Chen-Yu Tsai 2015-01-06 15:24 ` Eduardo Valentin 2015-01-06 15:24 ` Eduardo Valentin 2015-01-07 16:24 ` Chen-Yu Tsai 2015-01-07 16:24 ` Chen-Yu Tsai 2015-01-08 13:33 ` Chen-Yu Tsai 2015-01-08 13:33 ` Chen-Yu Tsai 2015-01-09 18:07 ` Eduardo Valentin 2015-01-09 18:07 ` Eduardo Valentin 2015-01-09 18:24 ` Chen-Yu Tsai 2015-01-09 18:24 ` Chen-Yu Tsai 2015-01-06 2:35 ` [PATCH 04/17] ARM: dts: sunxi: Add dtsi for AXP209 PMIC Chen-Yu Tsai 2015-01-06 2:35 ` Chen-Yu Tsai 2015-01-06 15:58 ` Maxime Ripard 2015-01-06 15:58 ` Maxime Ripard 2015-01-06 19:09 ` Chen-Yu Tsai 2015-01-06 19:09 ` Chen-Yu Tsai 2015-01-06 2:35 ` [PATCH 05/17] ARM: dts: sunxi: Enable thermal sensor support for RTP on sun[457]i Chen-Yu Tsai 2015-01-06 2:35 ` Chen-Yu Tsai 2015-01-06 15:25 ` Eduardo Valentin 2015-01-06 15:25 ` Eduardo Valentin 2015-01-06 15:52 ` Maxime Ripard 2015-01-06 15:52 ` Maxime Ripard 2015-01-06 2:35 ` [PATCH 06/17] ARM: dts: sun7i: Add cpu clock reference and operating points to dtsi Chen-Yu Tsai 2015-01-06 2:35 ` Chen-Yu Tsai 2015-01-06 16:07 ` Maxime Ripard 2015-01-06 16:07 ` Maxime Ripard 2015-01-06 2:35 ` [PATCH 07/17] ARM: dts: sun7i: Add cpu thermal zones " Chen-Yu Tsai 2015-01-06 2:35 ` Chen-Yu Tsai 2015-01-06 15:28 ` Eduardo Valentin 2015-01-06 15:28 ` Eduardo Valentin 2015-01-06 2:35 ` [PATCH 08/17] ARM: dts: sun7i: cubieboard2: add axp209 regulator nodes Chen-Yu Tsai 2015-01-06 2:35 ` Chen-Yu Tsai 2015-01-06 16:11 ` Maxime Ripard [this message] 2015-01-06 16:11 ` Maxime Ripard 2015-01-06 2:35 ` [PATCH 09/17] ARM: dts: sun7i: cubietruck: " Chen-Yu Tsai 2015-01-06 2:35 ` Chen-Yu Tsai 2015-01-06 2:35 ` [PATCH 10/17] ARM: dts: sun5i: Add cpu clock reference and operating points to dtsi Chen-Yu Tsai 2015-01-06 2:35 ` Chen-Yu Tsai 2015-01-06 2:35 ` [PATCH 11/17] ARM: dts: sun5i: Add cpu thermal zones " Chen-Yu Tsai 2015-01-06 2:35 ` Chen-Yu Tsai 2015-01-06 15:30 ` Eduardo Valentin 2015-01-06 15:30 ` Eduardo Valentin 2015-01-06 2:35 ` [PATCH 12/17] ARM: dts: sun5i: hsg-h702: add axp209 regulator nodes Chen-Yu Tsai 2015-01-06 2:35 ` Chen-Yu Tsai 2015-01-06 2:35 ` [PATCH 13/17] ARM: dts: sun4i: Add cpu clock reference and operating points to dtsi Chen-Yu Tsai 2015-01-06 2:35 ` Chen-Yu Tsai 2015-01-06 2:35 ` [PATCH 14/17] ARM: dts: sun4i: Add cpu thermal zones " Chen-Yu Tsai 2015-01-06 2:35 ` Chen-Yu Tsai 2015-01-06 15:29 ` Eduardo Valentin 2015-01-06 15:29 ` Eduardo Valentin 2015-01-06 2:35 ` [PATCH 15/17] ARM: dts: sun4i: cubieboard: add axp209 regulator nodes Chen-Yu Tsai 2015-01-06 2:35 ` Chen-Yu Tsai 2015-01-06 2:35 ` [PATCH 16/17] ARM: sunxi_defconfig: Enable TOUCHSCREEN_SUN4I, CPUFREQ_DT, CPU_THERMAL Chen-Yu Tsai 2015-01-06 2:35 ` Chen-Yu Tsai 2015-01-06 15:32 ` Eduardo Valentin 2015-01-06 15:32 ` Eduardo Valentin 2015-01-06 16:13 ` Maxime Ripard 2015-01-06 16:13 ` Maxime Ripard 2015-01-06 2:35 ` [PATCH 17/17] ARM: multi_v7_defconfig: Enable TOUCHSCREEN_SUN4I, CPU_THERMAL Chen-Yu Tsai 2015-01-06 2:35 ` Chen-Yu Tsai 2015-01-06 15:31 ` Eduardo Valentin 2015-01-06 15:31 ` Eduardo Valentin 2015-01-06 16:12 ` Maxime Ripard 2015-01-06 16:12 ` Maxime Ripard
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20150106161102.GV7853@lukather \ --to=maxime.ripard@free-electrons.com \ --cc=dmitry.torokhov@gmail.com \ --cc=edubezval@gmail.com \ --cc=hdegoede@redhat.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-input@vger.kernel.org \ --cc=linux-pm@vger.kernel.org \ --cc=rui.zhang@intel.com \ --cc=wens@csie.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.