All of lore.kernel.org
 help / color / mirror / Atom feed
From: Eduardo Valentin <edubezval@gmail.com>
To: Rajendra Nayak <rnayak@codeaurora.org>
Cc: agross@codeaurora.org, linux-arm-msm@vger.kernel.org,
	linux-pm@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	rui.zhang@intel.com, sboyd@codeaurora.org,
	srinivas.kandagatla@linaro.org, nrajan@codeaurora.org,
	lina.iyer@linaro.org, punit.agrawal@arm.com
Subject: Re: [PATCH v4 0/8] qcom: Add support for TSENS driver
Date: Mon, 2 Nov 2015 12:13:47 -0800	[thread overview]
Message-ID: <20151102201345.GA4238@localhost.localdomain> (raw)
In-Reply-To: <1444383670-32693-1-git-send-email-rnayak@codeaurora.org>

Rajendra,

On Fri, Oct 09, 2015 at 03:11:02PM +0530, Rajendra Nayak wrote:
> Patches 1/8 to 4/8 will need to go via the thermal tree/Eduardo.
> Patches 5/8 to 8/8 will need to go via qcom-msm tree/Andy.
> 
> Eduardo, can you please take a look at the patches and let me
> know if you see any issues.
> 

Thanks for your taking this over. I am assuming this superseeds the
work by Narendran.

Thanks.

> Current set of patches apply on 4.3-rc4. Need to pull in clk-next
> (for a dependent patch) to be able to test on ifc6410 board.
> 
> Changes since v3:
> * Dropped 'clk: qcom: create virtual child device for TSENS' which
> is picked up by Stephen
> * Updated GCC bindings with optional TSENS properties
> 
> Changes since v2:
> * Minor review fixes from Stephen/Punit and rebase on 4.3-rc4
> 
> Changes since v1:
> * Created virtual tsens device from gcc driver for 8960,
> with DT having a single node for gcc and tsens
> * Minor fixes with rebasing on 4.3-rc1
> 
> Changes since RFC:
> * Added support for 8916 and 8084
> * Based off the latest nvmem framework patches [1]
> * Minor review fixes for comments mostly from Lina
> 
> This is an attempt to have a single TSENS driver for
> the different versions of the TSENS IP that exist, on
> different qcom msm/apq SoCs'
> Support is added for msm8916, msm8960 and msm8974 families.
> 
> A lot of the work is based of original code from Stephen Boyd
> and Siddartha Mohanadoss. I have also picked some of what
> Narendran Rajan did in his attempt to upstream the support
> for 8960 family. I could not keep the original authorship on
> any of the patches because I ended up moving the code around
> quite a bit in an effort to have a single driver for the
> various devices. I would be glad to change the authorship
> for any of the patches if needed.
> 
> Rajendra Nayak (8):
>   thermal: qcom: tsens: Add a skeletal TSENS drivers
>   thermal: qcom: tsens-8916: Add support for 8916 family of SoCs
>   thermal: qcom: tsens-8974: Add support for 8974 family of SoCs
>   thermal: qcom: tsens-8960: Add support for 8960 family of SoCs
>   arm: dts: msm8974: Add thermal zones, tsens and qfprom nodes
>   arm: dts: apq8064: Add thermal zones, tsens and qfprom nodes
>   arm: dts: apq8084: Add thermal zones, tsens and qfprom nodes
>   arm64: dts: msm8916: Add thermal zones, tsens and qfprom nodes
> 
>  .../devicetree/bindings/clock/qcom,gcc.txt         |  20 ++
>  .../devicetree/bindings/thermal/qcom-tsens.txt     |  33 +++
>  arch/arm/boot/dts/qcom-apq8064.dtsi                | 101 +++++++
>  arch/arm/boot/dts/qcom-apq8084.dtsi                | 105 ++++++++
>  arch/arm/boot/dts/qcom-msm8974.dtsi                | 105 ++++++++
>  arch/arm64/boot/dts/qcom/msm8916.dtsi              |  66 +++++
>  drivers/thermal/Kconfig                            |   5 +
>  drivers/thermal/Makefile                           |   1 +
>  drivers/thermal/qcom/Kconfig                       |  10 +
>  drivers/thermal/qcom/Makefile                      |   2 +
>  drivers/thermal/qcom/tsens-8916.c                  | 107 ++++++++
>  drivers/thermal/qcom/tsens-8960.c                  | 291 +++++++++++++++++++++
>  drivers/thermal/qcom/tsens-8974.c                  | 239 +++++++++++++++++
>  drivers/thermal/qcom/tsens-common.c                | 130 +++++++++
>  drivers/thermal/qcom/tsens.c                       | 206 +++++++++++++++
>  drivers/thermal/qcom/tsens.h                       |  69 +++++
>  16 files changed, 1490 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/thermal/qcom-tsens.txt
>  create mode 100644 drivers/thermal/qcom/Kconfig
>  create mode 100644 drivers/thermal/qcom/Makefile
>  create mode 100644 drivers/thermal/qcom/tsens-8916.c
>  create mode 100644 drivers/thermal/qcom/tsens-8960.c
>  create mode 100644 drivers/thermal/qcom/tsens-8974.c
>  create mode 100644 drivers/thermal/qcom/tsens-common.c
>  create mode 100644 drivers/thermal/qcom/tsens.c
>  create mode 100644 drivers/thermal/qcom/tsens.h
> 
> -- 
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
> of Code Aurora Forum, hosted by The Linux Foundation
> 

WARNING: multiple messages have this Message-ID (diff)
From: edubezval@gmail.com (Eduardo Valentin)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 0/8] qcom: Add support for TSENS driver
Date: Mon, 2 Nov 2015 12:13:47 -0800	[thread overview]
Message-ID: <20151102201345.GA4238@localhost.localdomain> (raw)
In-Reply-To: <1444383670-32693-1-git-send-email-rnayak@codeaurora.org>

Rajendra,

On Fri, Oct 09, 2015 at 03:11:02PM +0530, Rajendra Nayak wrote:
> Patches 1/8 to 4/8 will need to go via the thermal tree/Eduardo.
> Patches 5/8 to 8/8 will need to go via qcom-msm tree/Andy.
> 
> Eduardo, can you please take a look at the patches and let me
> know if you see any issues.
> 

Thanks for your taking this over. I am assuming this superseeds the
work by Narendran.

Thanks.

> Current set of patches apply on 4.3-rc4. Need to pull in clk-next
> (for a dependent patch) to be able to test on ifc6410 board.
> 
> Changes since v3:
> * Dropped 'clk: qcom: create virtual child device for TSENS' which
> is picked up by Stephen
> * Updated GCC bindings with optional TSENS properties
> 
> Changes since v2:
> * Minor review fixes from Stephen/Punit and rebase on 4.3-rc4
> 
> Changes since v1:
> * Created virtual tsens device from gcc driver for 8960,
> with DT having a single node for gcc and tsens
> * Minor fixes with rebasing on 4.3-rc1
> 
> Changes since RFC:
> * Added support for 8916 and 8084
> * Based off the latest nvmem framework patches [1]
> * Minor review fixes for comments mostly from Lina
> 
> This is an attempt to have a single TSENS driver for
> the different versions of the TSENS IP that exist, on
> different qcom msm/apq SoCs'
> Support is added for msm8916, msm8960 and msm8974 families.
> 
> A lot of the work is based of original code from Stephen Boyd
> and Siddartha Mohanadoss. I have also picked some of what
> Narendran Rajan did in his attempt to upstream the support
> for 8960 family. I could not keep the original authorship on
> any of the patches because I ended up moving the code around
> quite a bit in an effort to have a single driver for the
> various devices. I would be glad to change the authorship
> for any of the patches if needed.
> 
> Rajendra Nayak (8):
>   thermal: qcom: tsens: Add a skeletal TSENS drivers
>   thermal: qcom: tsens-8916: Add support for 8916 family of SoCs
>   thermal: qcom: tsens-8974: Add support for 8974 family of SoCs
>   thermal: qcom: tsens-8960: Add support for 8960 family of SoCs
>   arm: dts: msm8974: Add thermal zones, tsens and qfprom nodes
>   arm: dts: apq8064: Add thermal zones, tsens and qfprom nodes
>   arm: dts: apq8084: Add thermal zones, tsens and qfprom nodes
>   arm64: dts: msm8916: Add thermal zones, tsens and qfprom nodes
> 
>  .../devicetree/bindings/clock/qcom,gcc.txt         |  20 ++
>  .../devicetree/bindings/thermal/qcom-tsens.txt     |  33 +++
>  arch/arm/boot/dts/qcom-apq8064.dtsi                | 101 +++++++
>  arch/arm/boot/dts/qcom-apq8084.dtsi                | 105 ++++++++
>  arch/arm/boot/dts/qcom-msm8974.dtsi                | 105 ++++++++
>  arch/arm64/boot/dts/qcom/msm8916.dtsi              |  66 +++++
>  drivers/thermal/Kconfig                            |   5 +
>  drivers/thermal/Makefile                           |   1 +
>  drivers/thermal/qcom/Kconfig                       |  10 +
>  drivers/thermal/qcom/Makefile                      |   2 +
>  drivers/thermal/qcom/tsens-8916.c                  | 107 ++++++++
>  drivers/thermal/qcom/tsens-8960.c                  | 291 +++++++++++++++++++++
>  drivers/thermal/qcom/tsens-8974.c                  | 239 +++++++++++++++++
>  drivers/thermal/qcom/tsens-common.c                | 130 +++++++++
>  drivers/thermal/qcom/tsens.c                       | 206 +++++++++++++++
>  drivers/thermal/qcom/tsens.h                       |  69 +++++
>  16 files changed, 1490 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/thermal/qcom-tsens.txt
>  create mode 100644 drivers/thermal/qcom/Kconfig
>  create mode 100644 drivers/thermal/qcom/Makefile
>  create mode 100644 drivers/thermal/qcom/tsens-8916.c
>  create mode 100644 drivers/thermal/qcom/tsens-8960.c
>  create mode 100644 drivers/thermal/qcom/tsens-8974.c
>  create mode 100644 drivers/thermal/qcom/tsens-common.c
>  create mode 100644 drivers/thermal/qcom/tsens.c
>  create mode 100644 drivers/thermal/qcom/tsens.h
> 
> -- 
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
> of Code Aurora Forum, hosted by The Linux Foundation
> 

  parent reply	other threads:[~2015-11-02 20:13 UTC|newest]

Thread overview: 46+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-10-09  9:41 [PATCH v4 0/8] qcom: Add support for TSENS driver Rajendra Nayak
2015-10-09  9:41 ` Rajendra Nayak
2015-10-09  9:41 ` [PATCH v4 1/8] thermal: qcom: tsens: Add a skeletal TSENS drivers Rajendra Nayak
2015-10-09  9:41   ` Rajendra Nayak
2015-11-02 20:30   ` Eduardo Valentin
2015-11-02 20:30     ` Eduardo Valentin
2015-11-05  6:53     ` Rajendra Nayak
2015-11-05  6:53       ` Rajendra Nayak
2015-11-30  7:09       ` Rajendra Nayak
2015-11-30  7:09         ` Rajendra Nayak
2015-12-10 14:58         ` Rajendra Nayak
2015-12-10 14:58           ` Rajendra Nayak
2015-11-02 21:09   ` Eduardo Valentin
2015-11-02 21:09     ` Eduardo Valentin
2015-10-09  9:41 ` [PATCH v4 2/8] thermal: qcom: tsens-8916: Add support for 8916 family of SoCs Rajendra Nayak
2015-10-09  9:41   ` Rajendra Nayak
2015-11-02 20:42   ` Eduardo Valentin
2015-11-02 20:42     ` Eduardo Valentin
2015-11-05  7:10     ` Rajendra Nayak
2015-11-05  7:10       ` Rajendra Nayak
2015-10-09  9:41 ` [PATCH v4 3/8] thermal: qcom: tsens-8974: Add support for 8974 " Rajendra Nayak
2015-10-09  9:41   ` Rajendra Nayak
2015-10-09  9:41 ` [PATCH v4 4/8] thermal: qcom: tsens-8960: Add support for 8960 " Rajendra Nayak
2015-10-09  9:41   ` Rajendra Nayak
2015-11-02 20:51   ` Eduardo Valentin
2015-11-02 20:51     ` Eduardo Valentin
2015-11-05  8:05     ` Rajendra Nayak
2015-11-05  8:05       ` Rajendra Nayak
2015-10-09  9:41 ` [PATCH v4 5/8] arm: dts: msm8974: Add thermal zones, tsens and qfprom nodes Rajendra Nayak
2015-10-09  9:41   ` Rajendra Nayak
2015-10-09  9:41 ` [PATCH v4 6/8] arm: dts: apq8064: " Rajendra Nayak
2015-10-09  9:41   ` Rajendra Nayak
2015-10-09  9:41 ` [PATCH v4 7/8] arm: dts: apq8084: " Rajendra Nayak
2015-10-09  9:41   ` Rajendra Nayak
2015-10-09  9:41 ` [PATCH v4 8/8] arm64: dts: msm8916: " Rajendra Nayak
2015-10-09  9:41   ` Rajendra Nayak
2015-11-02 20:13 ` Eduardo Valentin [this message]
2015-11-02 20:13   ` [PATCH v4 0/8] qcom: Add support for TSENS driver Eduardo Valentin
2015-11-02 20:14   ` Eduardo Valentin
2015-11-02 20:14     ` Eduardo Valentin
2015-11-05  6:51   ` Rajendra Nayak
2015-11-05  6:51     ` Rajendra Nayak
2015-11-02 20:54 ` Eduardo Valentin
2015-11-02 20:54   ` Eduardo Valentin
2015-11-05  8:09   ` Rajendra Nayak
2015-11-05  8:09     ` Rajendra Nayak

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20151102201345.GA4238@localhost.localdomain \
    --to=edubezval@gmail.com \
    --cc=agross@codeaurora.org \
    --cc=lina.iyer@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=nrajan@codeaurora.org \
    --cc=punit.agrawal@arm.com \
    --cc=rnayak@codeaurora.org \
    --cc=rui.zhang@intel.com \
    --cc=sboyd@codeaurora.org \
    --cc=srinivas.kandagatla@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.