From: Stefan Agner <stefan@agner.ch>
To: lee.jones@linaro.org, lgirdwood@gmail.com, broonie@kernel.org,
khilman@baylibre.com, carlo@caione.org
Cc: b.galvani@gmail.com, max.oss.09@gmail.com, marcel@ziswiler.com,
linux@armlinux.org.uk, galak@codeaurora.org,
ijc+devicetree@hellion.org.uk, mark.rutland@arm.com,
pawel.moll@arm.com, robh+dt@kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-amlogic@lists.infradead.org, Stefan Agner <stefan@agner.ch>
Subject: [PATCH 0/5] regulator: add Ricoh RN5T567 PMIC support
Date: Sat, 4 Jun 2016 17:17:43 -0700 [thread overview]
Message-ID: <20160605001749.4062-1-stefan@agner.ch> (raw)
This patchset adds RN5T567 PMIC support which is used on the
Toradex Colibri iMX7S/iMX7D modules. The existing RN5T618 is from
the same family, hence this patchset uses the same driver and adds
variant support.
The Colibris currently do not use the PMIC's power off capabilities,
hence this patchset also makes the use of system-power-controller
property mandatory if the power off capabilties are required.
Stefan Agner (5):
ARM: dts: meson: minix-neo-x8: define PMIC as power controller
mfd: add Ricoh RN5T567 PMIC support
regulator: rn5t618: add RN5T567 PMIC support
mfd: rn5t618: register power off callback optionally
mfd: rn5t618: register restart handler
Documentation/devicetree/bindings/mfd/rn5t618.txt | 19 +++---
arch/arm/boot/dts/meson8-minix-neo-x8.dts | 1 +
drivers/mfd/Kconfig | 7 ++-
drivers/mfd/rn5t618.c | 70 +++++++++++++++++++----
drivers/regulator/Kconfig | 5 +-
drivers/regulator/rn5t618-regulator.c | 40 +++++++++++--
include/linux/mfd/rn5t618.h | 13 +++++
7 files changed, 126 insertions(+), 29 deletions(-)
--
2.8.3
WARNING: multiple messages have this Message-ID (diff)
From: Stefan Agner <stefan-XLVq0VzYD2Y@public.gmane.org>
To: lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
khilman-rdvid1DuHRBWk0Htik3J/w@public.gmane.org,
carlo-KA+7E9HrN00dnm+yROfE0A@public.gmane.org
Cc: b.galvani-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
max.oss.09-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
marcel-mitwqZ+T+m9Wk0Htik3J/w@public.gmane.org,
linux-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org,
galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org,
pawel.moll-5wv7dgnIgG8@public.gmane.org,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-amlogic-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
Stefan Agner <stefan-XLVq0VzYD2Y@public.gmane.org>
Subject: [PATCH 0/5] regulator: add Ricoh RN5T567 PMIC support
Date: Sat, 4 Jun 2016 17:17:43 -0700 [thread overview]
Message-ID: <20160605001749.4062-1-stefan@agner.ch> (raw)
This patchset adds RN5T567 PMIC support which is used on the
Toradex Colibri iMX7S/iMX7D modules. The existing RN5T618 is from
the same family, hence this patchset uses the same driver and adds
variant support.
The Colibris currently do not use the PMIC's power off capabilities,
hence this patchset also makes the use of system-power-controller
property mandatory if the power off capabilties are required.
Stefan Agner (5):
ARM: dts: meson: minix-neo-x8: define PMIC as power controller
mfd: add Ricoh RN5T567 PMIC support
regulator: rn5t618: add RN5T567 PMIC support
mfd: rn5t618: register power off callback optionally
mfd: rn5t618: register restart handler
Documentation/devicetree/bindings/mfd/rn5t618.txt | 19 +++---
arch/arm/boot/dts/meson8-minix-neo-x8.dts | 1 +
drivers/mfd/Kconfig | 7 ++-
drivers/mfd/rn5t618.c | 70 +++++++++++++++++++----
drivers/regulator/Kconfig | 5 +-
drivers/regulator/rn5t618-regulator.c | 40 +++++++++++--
include/linux/mfd/rn5t618.h | 13 +++++
7 files changed, 126 insertions(+), 29 deletions(-)
--
2.8.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: stefan@agner.ch (Stefan Agner)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 0/5] regulator: add Ricoh RN5T567 PMIC support
Date: Sat, 4 Jun 2016 17:17:43 -0700 [thread overview]
Message-ID: <20160605001749.4062-1-stefan@agner.ch> (raw)
This patchset adds RN5T567 PMIC support which is used on the
Toradex Colibri iMX7S/iMX7D modules. The existing RN5T618 is from
the same family, hence this patchset uses the same driver and adds
variant support.
The Colibris currently do not use the PMIC's power off capabilities,
hence this patchset also makes the use of system-power-controller
property mandatory if the power off capabilties are required.
Stefan Agner (5):
ARM: dts: meson: minix-neo-x8: define PMIC as power controller
mfd: add Ricoh RN5T567 PMIC support
regulator: rn5t618: add RN5T567 PMIC support
mfd: rn5t618: register power off callback optionally
mfd: rn5t618: register restart handler
Documentation/devicetree/bindings/mfd/rn5t618.txt | 19 +++---
arch/arm/boot/dts/meson8-minix-neo-x8.dts | 1 +
drivers/mfd/Kconfig | 7 ++-
drivers/mfd/rn5t618.c | 70 +++++++++++++++++++----
drivers/regulator/Kconfig | 5 +-
drivers/regulator/rn5t618-regulator.c | 40 +++++++++++--
include/linux/mfd/rn5t618.h | 13 +++++
7 files changed, 126 insertions(+), 29 deletions(-)
--
2.8.3
WARNING: multiple messages have this Message-ID (diff)
From: stefan@agner.ch (Stefan Agner)
To: linus-amlogic@lists.infradead.org
Subject: [PATCH 0/5] regulator: add Ricoh RN5T567 PMIC support
Date: Sat, 4 Jun 2016 17:17:43 -0700 [thread overview]
Message-ID: <20160605001749.4062-1-stefan@agner.ch> (raw)
This patchset adds RN5T567 PMIC support which is used on the
Toradex Colibri iMX7S/iMX7D modules. The existing RN5T618 is from
the same family, hence this patchset uses the same driver and adds
variant support.
The Colibris currently do not use the PMIC's power off capabilities,
hence this patchset also makes the use of system-power-controller
property mandatory if the power off capabilties are required.
Stefan Agner (5):
ARM: dts: meson: minix-neo-x8: define PMIC as power controller
mfd: add Ricoh RN5T567 PMIC support
regulator: rn5t618: add RN5T567 PMIC support
mfd: rn5t618: register power off callback optionally
mfd: rn5t618: register restart handler
Documentation/devicetree/bindings/mfd/rn5t618.txt | 19 +++---
arch/arm/boot/dts/meson8-minix-neo-x8.dts | 1 +
drivers/mfd/Kconfig | 7 ++-
drivers/mfd/rn5t618.c | 70 +++++++++++++++++++----
drivers/regulator/Kconfig | 5 +-
drivers/regulator/rn5t618-regulator.c | 40 +++++++++++--
include/linux/mfd/rn5t618.h | 13 +++++
7 files changed, 126 insertions(+), 29 deletions(-)
--
2.8.3
next reply other threads:[~2016-06-05 0:18 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-05 0:17 Stefan Agner [this message]
2016-06-05 0:17 ` [PATCH 0/5] regulator: add Ricoh RN5T567 PMIC support Stefan Agner
2016-06-05 0:17 ` Stefan Agner
2016-06-05 0:17 ` Stefan Agner
2016-06-05 0:17 ` [PATCH 1/5] ARM: dts: meson: minix-neo-x8: define PMIC as power controller Stefan Agner
2016-06-05 0:17 ` Stefan Agner
2016-06-05 0:17 ` Stefan Agner
2016-06-05 0:17 ` Stefan Agner
2016-06-29 18:05 ` Applied "ARM: dts: meson: minix-neo-x8: define PMIC as power controller" to the regulator tree Mark Brown
2016-06-29 18:05 ` Mark Brown
2016-06-29 18:05 ` Mark Brown
2016-06-29 18:05 ` Mark Brown
2016-06-05 0:17 ` [PATCH 2/5] mfd: add Ricoh RN5T567 PMIC support Stefan Agner
2016-06-05 0:17 ` Stefan Agner
2016-06-05 0:17 ` Stefan Agner
2016-06-05 0:17 ` Stefan Agner
2016-06-05 0:17 ` [PATCH 3/5] regulator: rn5t618: Add " Stefan Agner
2016-06-05 0:17 ` Stefan Agner
2016-06-05 0:17 ` Stefan Agner
2016-06-29 18:05 ` Applied "regulator: rn5t618: Add RN5T567 PMIC support" to the regulator tree Mark Brown
2016-06-29 18:05 ` Mark Brown
2016-06-29 18:05 ` Mark Brown
2016-06-29 18:05 ` Mark Brown
2016-06-05 0:17 ` [PATCH 3/5] regulator: rn5t618: add RN5T567 PMIC support Stefan Agner
2016-06-05 0:17 ` Stefan Agner
2016-06-05 0:17 ` Stefan Agner
2016-06-06 17:35 ` Mark Brown
2016-06-06 17:35 ` Mark Brown
2016-06-06 17:35 ` Mark Brown
2016-06-06 17:47 ` Stefan Agner
2016-06-06 17:47 ` Stefan Agner
2016-06-06 17:47 ` Stefan Agner
2016-06-06 17:47 ` Stefan Agner
2016-06-06 18:04 ` Mark Brown
2016-06-06 18:04 ` Mark Brown
2016-06-06 18:04 ` Mark Brown
2016-06-05 0:17 ` [PATCH 4/5] mfd: rn5t618: register power off callback optionally Stefan Agner
2016-06-05 0:17 ` Stefan Agner
2016-06-05 0:17 ` Stefan Agner
2016-06-05 0:17 ` [PATCH 5/5] mfd: rn5t618: register restart handler Stefan Agner
2016-06-05 0:17 ` Stefan Agner
2016-06-05 0:17 ` Stefan Agner
2016-06-05 1:24 ` kbuild test robot
2016-06-05 1:24 ` kbuild test robot
2016-06-05 1:24 ` kbuild test robot
2016-06-05 1:24 ` kbuild test robot
2016-06-05 2:52 ` Stefan Agner
2016-06-05 2:52 ` Stefan Agner
2016-06-05 2:52 ` Stefan Agner
2016-06-05 2:52 ` Stefan Agner
2016-06-06 13:25 ` Marcel Ziswiler
2016-06-06 13:25 ` Marcel Ziswiler
2016-06-06 13:25 ` Marcel Ziswiler
2016-06-06 17:19 ` Stefan Agner
2016-06-06 17:19 ` Stefan Agner
2016-06-06 17:19 ` Stefan Agner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160605001749.4062-1-stefan@agner.ch \
--to=stefan@agner.ch \
--cc=b.galvani@gmail.com \
--cc=broonie@kernel.org \
--cc=carlo@caione.org \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=khilman@baylibre.com \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=marcel@ziswiler.com \
--cc=mark.rutland@arm.com \
--cc=max.oss.09@gmail.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.