From: Maxime Ripard <maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
To: Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Daniel Vetter
<daniel.vetter-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>,
David Airlie <airlied-cv59FeDIM0c@public.gmane.org>
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Boris Brezillon
<boris.brezillon-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>,
Laurent Pinchart
<laurent.pinchart-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org>,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org,
Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>,
Maxime Ripard
<maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
Subject: [PATCH v2 5/7] ARM: sun5i: a13-olinuxino: Enable VGA bridge
Date: Wed, 20 Jul 2016 11:58:55 +0200 [thread overview]
Message-ID: <20160720095857.12297-6-maxime.ripard@free-electrons.com> (raw)
In-Reply-To: <20160720095857.12297-1-maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
Now that we have support for the VGA bridges using our DRM driver, enable
the display engine for the Olimex A13-Olinuxino.
Signed-off-by: Maxime Ripard <maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
---
arch/arm/boot/dts/sun5i-a13-olinuxino.dts | 60 +++++++++++++++++++++++++++++++
1 file changed, 60 insertions(+)
diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
index b3c234c65ea1..1f87b481e9b2 100644
--- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
+++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
@@ -72,6 +72,53 @@
default-state = "on";
};
};
+
+ bridge {
+ compatible = "dumb-vga-bridge";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ vga_bridge_in: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&tcon0_out_vga>;
+ };
+ };
+
+ port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ vga_bridge_out: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&vga_con_in>;
+ };
+ };
+ };
+ };
+
+ vga {
+ compatible = "vga-connector";
+
+ port {
+ vga_con_in: endpoint {
+ remote-endpoint = <&vga_bridge_out>;
+ };
+ };
+ };
+};
+
+&be0 {
+ status = "okay";
};
&ehci0 {
@@ -211,6 +258,19 @@
status = "okay";
};
+&tcon0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_rgb666_pins>;
+ status = "okay";
+};
+
+&tcon0_out {
+ tcon0_out_vga: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&vga_bridge_in>;
+ };
+};
+
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins_b>;
--
2.9.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: maxime.ripard@free-electrons.com (Maxime Ripard)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 5/7] ARM: sun5i: a13-olinuxino: Enable VGA bridge
Date: Wed, 20 Jul 2016 11:58:55 +0200 [thread overview]
Message-ID: <20160720095857.12297-6-maxime.ripard@free-electrons.com> (raw)
In-Reply-To: <20160720095857.12297-1-maxime.ripard@free-electrons.com>
Now that we have support for the VGA bridges using our DRM driver, enable
the display engine for the Olimex A13-Olinuxino.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
arch/arm/boot/dts/sun5i-a13-olinuxino.dts | 60 +++++++++++++++++++++++++++++++
1 file changed, 60 insertions(+)
diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
index b3c234c65ea1..1f87b481e9b2 100644
--- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
+++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
@@ -72,6 +72,53 @@
default-state = "on";
};
};
+
+ bridge {
+ compatible = "dumb-vga-bridge";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ vga_bridge_in: endpoint at 0 {
+ reg = <0>;
+ remote-endpoint = <&tcon0_out_vga>;
+ };
+ };
+
+ port at 1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ vga_bridge_out: endpoint at 0 {
+ reg = <0>;
+ remote-endpoint = <&vga_con_in>;
+ };
+ };
+ };
+ };
+
+ vga {
+ compatible = "vga-connector";
+
+ port {
+ vga_con_in: endpoint {
+ remote-endpoint = <&vga_bridge_out>;
+ };
+ };
+ };
+};
+
+&be0 {
+ status = "okay";
};
&ehci0 {
@@ -211,6 +258,19 @@
status = "okay";
};
+&tcon0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_rgb666_pins>;
+ status = "okay";
+};
+
+&tcon0_out {
+ tcon0_out_vga: endpoint at 0 {
+ reg = <0>;
+ remote-endpoint = <&vga_bridge_in>;
+ };
+};
+
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins_b>;
--
2.9.0
next prev parent reply other threads:[~2016-07-20 9:58 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-20 9:58 [PATCH v2 0/7] drm: Add Support for Passive RGB to VGA bridges Maxime Ripard
2016-07-20 9:58 ` Maxime Ripard
[not found] ` <20160720095857.12297-1-maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
2016-07-20 9:58 ` [PATCH v2 1/7] drm/sun4i: Store TCON's device structure pointer Maxime Ripard
2016-07-20 9:58 ` Maxime Ripard
2016-07-20 9:58 ` [PATCH v2 2/7] drm/sun4i: Move panel retrieval in RGB connector Maxime Ripard
2016-07-20 9:58 ` Maxime Ripard
2016-07-20 9:58 ` [PATCH v2 3/7] drm/sun4i: Add bridge support Maxime Ripard
2016-07-20 9:58 ` Maxime Ripard
2016-07-20 9:58 ` [PATCH v2 4/7] drm/bridge: Add RGB to VGA " Maxime Ripard
2016-07-20 9:58 ` Maxime Ripard
[not found] ` <20160720095857.12297-5-maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
2016-07-20 19:34 ` Rob Herring
2016-07-20 19:34 ` Rob Herring
2016-07-21 9:53 ` Archit Taneja
2016-07-21 9:53 ` Archit Taneja
2016-08-22 13:37 ` Maxime Ripard
2016-08-22 13:37 ` Maxime Ripard
2016-07-20 9:58 ` Maxime Ripard [this message]
2016-07-20 9:58 ` [PATCH v2 5/7] ARM: sun5i: a13-olinuxino: Enable VGA bridge Maxime Ripard
2016-07-20 9:58 ` [PATCH v2 6/7] ARM: multi_v7: enable " Maxime Ripard
2016-07-20 9:58 ` Maxime Ripard
2016-07-20 9:58 ` [PATCH v2 7/7] ARM: sunxi: Enable " Maxime Ripard
2016-07-20 9:58 ` Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160720095857.12297-6-maxime.ripard@free-electrons.com \
--to=maxime.ripard-wi1+55scjutkeb57/3fjtnbpr1lh4cv8@public.gmane.org \
--cc=airlied-cv59FeDIM0c@public.gmane.org \
--cc=boris.brezillon-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org \
--cc=daniel.vetter-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
--cc=laurent.pinchart-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=wens-jdAy2FN1RRM@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.