From: Krzysztof Kozlowski <krzk@kernel.org>
To: Wolfgang Wiedmeyer <wolfgang@wiedmeyer.de>
Cc: Krzysztof Kozlowski <krzk@kernel.org>,
kgene@kernel.org, robh+dt@kernel.org, mark.rutland@arm.com,
linux@armlinux.org.uk, javier@osg.samsung.com,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org,
Marek Szyprowski <m.szyprowski@samsung.com>
Subject: Re: [PATCH] ARM: dts: exynos: Add reboot reason support for Trats2
Date: Sun, 25 Sep 2016 09:34:45 +0200 [thread overview]
Message-ID: <20160925073445.GA2469@kozik-lap> (raw)
In-Reply-To: <87fuopvwjy.fsf@machinist.wiedmeyer.de>
On Sat, Sep 24, 2016 at 11:04:49PM +0200, Wolfgang Wiedmeyer wrote:
>
> Krzysztof Kozlowski writes:
>
> > On Thu, Sep 22, 2016 at 08:59:03PM +0200, Wolfgang Wiedmeyer wrote:
> >>
> >> Krzysztof Kozlowski writes:
> >>
> >> > On Thu, Sep 22, 2016 at 06:48:35PM +0200, Wolfgang Wiedmeyer wrote:
> >> >> This allows to reboot the device into recovery mode and into the download
> >> >> mode of the bootloader.
> >> >
> >> > Which bootloader? Probably UBoot... or Samsung stock one? Could you put
> >> > that information here?
> >>
> >> I'm only working with the stock one. I was under the impression that the
> >> stock bootloader cannot be replaced on a i9300 because there's a
> >> signature check. Is UBoot loaded after the stock one on Trats2 or how
> >> does this work? I didn't find information on that.
> >
> > +CC Marek,
> >
> > Trats2 is working with U-Boot. Just U-Boot. However I never converted S3
> > into Trats2 on my own. I always used targets prepared to be "Trats2"
> > type.
>
> It would be awesome to be able to run U-Boot on i9300. Is there a way to
> test this by not risking to brick the device, e.g. by booting from the
> SD card? Then I could send an updated version of the patch that is
> compatible with U-Boot :)
I don't think the stock bootloader supports chaining another bootloader
from SD card. There is a way of booting from SD card by shortening a
resistor but it is an emergency rescue procedure to overwrite existing
bootloader with data from SD card (to restore device). This thread might
be interesting:
http://forum.xda-developers.com/showpost.php?p=47234165&postcount=220
https://smyl.es/samsung-galaxy-iii-s3-gt-i9300-jtag-leaked-document-how-to-repair-soft-bricked-galaxy-s3/
On xda-developers you might find more data about this (including the
procedure for emergency restore from SD card). Somehow people flash and
unbrick their devices when playing with CyanogenMod...
Best regards,
Krzysztof
WARNING: multiple messages have this Message-ID (diff)
From: Krzysztof Kozlowski <krzk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
To: Wolfgang Wiedmeyer <wolfgang-CMKNnOTVkIZM7kwft8N7nw@public.gmane.org>
Cc: Krzysztof Kozlowski
<krzk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
kgene-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org,
linux-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org,
javier-JPH+aEBZ4P+UEJcrhfAQsw@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Marek Szyprowski
<m.szyprowski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
Subject: Re: [PATCH] ARM: dts: exynos: Add reboot reason support for Trats2
Date: Sun, 25 Sep 2016 09:34:45 +0200 [thread overview]
Message-ID: <20160925073445.GA2469@kozik-lap> (raw)
In-Reply-To: <87fuopvwjy.fsf-6RCjNufJqToCV2nOUgGaAMKAMo+5xgj5@public.gmane.org>
On Sat, Sep 24, 2016 at 11:04:49PM +0200, Wolfgang Wiedmeyer wrote:
>
> Krzysztof Kozlowski writes:
>
> > On Thu, Sep 22, 2016 at 08:59:03PM +0200, Wolfgang Wiedmeyer wrote:
> >>
> >> Krzysztof Kozlowski writes:
> >>
> >> > On Thu, Sep 22, 2016 at 06:48:35PM +0200, Wolfgang Wiedmeyer wrote:
> >> >> This allows to reboot the device into recovery mode and into the download
> >> >> mode of the bootloader.
> >> >
> >> > Which bootloader? Probably UBoot... or Samsung stock one? Could you put
> >> > that information here?
> >>
> >> I'm only working with the stock one. I was under the impression that the
> >> stock bootloader cannot be replaced on a i9300 because there's a
> >> signature check. Is UBoot loaded after the stock one on Trats2 or how
> >> does this work? I didn't find information on that.
> >
> > +CC Marek,
> >
> > Trats2 is working with U-Boot. Just U-Boot. However I never converted S3
> > into Trats2 on my own. I always used targets prepared to be "Trats2"
> > type.
>
> It would be awesome to be able to run U-Boot on i9300. Is there a way to
> test this by not risking to brick the device, e.g. by booting from the
> SD card? Then I could send an updated version of the patch that is
> compatible with U-Boot :)
I don't think the stock bootloader supports chaining another bootloader
from SD card. There is a way of booting from SD card by shortening a
resistor but it is an emergency rescue procedure to overwrite existing
bootloader with data from SD card (to restore device). This thread might
be interesting:
http://forum.xda-developers.com/showpost.php?p=47234165&postcount=220
https://smyl.es/samsung-galaxy-iii-s3-gt-i9300-jtag-leaked-document-how-to-repair-soft-bricked-galaxy-s3/
On xda-developers you might find more data about this (including the
procedure for emergency restore from SD card). Somehow people flash and
unbrick their devices when playing with CyanogenMod...
Best regards,
Krzysztof
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: krzk@kernel.org (Krzysztof Kozlowski)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: dts: exynos: Add reboot reason support for Trats2
Date: Sun, 25 Sep 2016 09:34:45 +0200 [thread overview]
Message-ID: <20160925073445.GA2469@kozik-lap> (raw)
In-Reply-To: <87fuopvwjy.fsf@machinist.wiedmeyer.de>
On Sat, Sep 24, 2016 at 11:04:49PM +0200, Wolfgang Wiedmeyer wrote:
>
> Krzysztof Kozlowski writes:
>
> > On Thu, Sep 22, 2016 at 08:59:03PM +0200, Wolfgang Wiedmeyer wrote:
> >>
> >> Krzysztof Kozlowski writes:
> >>
> >> > On Thu, Sep 22, 2016 at 06:48:35PM +0200, Wolfgang Wiedmeyer wrote:
> >> >> This allows to reboot the device into recovery mode and into the download
> >> >> mode of the bootloader.
> >> >
> >> > Which bootloader? Probably UBoot... or Samsung stock one? Could you put
> >> > that information here?
> >>
> >> I'm only working with the stock one. I was under the impression that the
> >> stock bootloader cannot be replaced on a i9300 because there's a
> >> signature check. Is UBoot loaded after the stock one on Trats2 or how
> >> does this work? I didn't find information on that.
> >
> > +CC Marek,
> >
> > Trats2 is working with U-Boot. Just U-Boot. However I never converted S3
> > into Trats2 on my own. I always used targets prepared to be "Trats2"
> > type.
>
> It would be awesome to be able to run U-Boot on i9300. Is there a way to
> test this by not risking to brick the device, e.g. by booting from the
> SD card? Then I could send an updated version of the patch that is
> compatible with U-Boot :)
I don't think the stock bootloader supports chaining another bootloader
from SD card. There is a way of booting from SD card by shortening a
resistor but it is an emergency rescue procedure to overwrite existing
bootloader with data from SD card (to restore device). This thread might
be interesting:
http://forum.xda-developers.com/showpost.php?p=47234165&postcount=220
https://smyl.es/samsung-galaxy-iii-s3-gt-i9300-jtag-leaked-document-how-to-repair-soft-bricked-galaxy-s3/
On xda-developers you might find more data about this (including the
procedure for emergency restore from SD card). Somehow people flash and
unbrick their devices when playing with CyanogenMod...
Best regards,
Krzysztof
next prev parent reply other threads:[~2016-09-25 7:34 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-22 16:48 [PATCH] ARM: dts: exynos: Add reboot reason support for Trats2 Wolfgang Wiedmeyer
2016-09-22 16:48 ` Wolfgang Wiedmeyer
2016-09-22 16:48 ` Wolfgang Wiedmeyer
2016-09-22 17:46 ` Krzysztof Kozlowski
2016-09-22 17:46 ` Krzysztof Kozlowski
2016-09-22 17:46 ` Krzysztof Kozlowski
2016-09-22 18:59 ` Wolfgang Wiedmeyer
2016-09-22 18:59 ` Wolfgang Wiedmeyer
2016-09-22 18:59 ` Wolfgang Wiedmeyer
2016-09-22 20:55 ` Krzysztof Kozlowski
2016-09-22 20:55 ` Krzysztof Kozlowski
2016-09-24 21:04 ` Wolfgang Wiedmeyer
2016-09-24 21:04 ` Wolfgang Wiedmeyer
2016-09-24 21:04 ` Wolfgang Wiedmeyer
2016-09-25 7:34 ` Krzysztof Kozlowski [this message]
2016-09-25 7:34 ` Krzysztof Kozlowski
2016-09-25 7:34 ` Krzysztof Kozlowski
2016-09-26 17:07 ` Krzysztof Kozlowski
2016-09-26 17:07 ` Krzysztof Kozlowski
2016-09-26 17:07 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160925073445.GA2469@kozik-lap \
--to=krzk@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=javier@osg.samsung.com \
--cc=kgene@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=m.szyprowski@samsung.com \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=wolfgang@wiedmeyer.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.