From: Russell King - ARM Linux <linux@armlinux.org.uk>
To: Sudeep Holla <sudeep.holla@arm.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Olof Johansson <olof@lixom.net>,
linux-amlogic@lists.infradead.org,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 0/8] firmware: arm_scpi: add support for legacy SCPI protocol
Date: Tue, 8 Nov 2016 16:13:31 +0000 [thread overview]
Message-ID: <20161108161331.GV1041@n2100.armlinux.org.uk> (raw)
In-Reply-To: <e83e8462-6d63-7253-f69c-afb507463bba@arm.com>
On Tue, Nov 08, 2016 at 04:08:38PM +0000, Sudeep Holla wrote:
> I will focus on this and see what's happening. I have issue with network
> on my setup with debug build and Linaro guys are not seeing it. I revert
> to release build of UEFI for that. Anyways one suggestion I have right
> now is to erase the second partition of NOR flash where the old UEFI
> config is placed and it could be conflicting with the new UEFI image.
>
> Cmd> flash
>
>
> Switching on main power...
> PMIC RAM configuration (pms_v105.bin)...
> IOFPGA config: PASSED
> Enabling usb remote...
>
>
> Flash> ERASERANGE 0x0BFC0000 0x0BFF0000
>
> I will looking into that further.
Still behaves the same, stopping at:
FV2 Hob 0xFE07B000 - 0xFE8253BF
--
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.
WARNING: multiple messages have this Message-ID (diff)
From: linux@armlinux.org.uk (Russell King - ARM Linux)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 0/8] firmware: arm_scpi: add support for legacy SCPI protocol
Date: Tue, 8 Nov 2016 16:13:31 +0000 [thread overview]
Message-ID: <20161108161331.GV1041@n2100.armlinux.org.uk> (raw)
In-Reply-To: <e83e8462-6d63-7253-f69c-afb507463bba@arm.com>
On Tue, Nov 08, 2016 at 04:08:38PM +0000, Sudeep Holla wrote:
> I will focus on this and see what's happening. I have issue with network
> on my setup with debug build and Linaro guys are not seeing it. I revert
> to release build of UEFI for that. Anyways one suggestion I have right
> now is to erase the second partition of NOR flash where the old UEFI
> config is placed and it could be conflicting with the new UEFI image.
>
> Cmd> flash
>
>
> Switching on main power...
> PMIC RAM configuration (pms_v105.bin)...
> IOFPGA config: PASSED
> Enabling usb remote...
>
>
> Flash> ERASERANGE 0x0BFC0000 0x0BFF0000
>
> I will looking into that further.
Still behaves the same, stopping at:
FV2 Hob 0xFE07B000 - 0xFE8253BF
--
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.
WARNING: multiple messages have this Message-ID (diff)
From: linux@armlinux.org.uk (Russell King - ARM Linux)
To: linus-amlogic@lists.infradead.org
Subject: [PATCH 0/8] firmware: arm_scpi: add support for legacy SCPI protocol
Date: Tue, 8 Nov 2016 16:13:31 +0000 [thread overview]
Message-ID: <20161108161331.GV1041@n2100.armlinux.org.uk> (raw)
In-Reply-To: <e83e8462-6d63-7253-f69c-afb507463bba@arm.com>
On Tue, Nov 08, 2016 at 04:08:38PM +0000, Sudeep Holla wrote:
> I will focus on this and see what's happening. I have issue with network
> on my setup with debug build and Linaro guys are not seeing it. I revert
> to release build of UEFI for that. Anyways one suggestion I have right
> now is to erase the second partition of NOR flash where the old UEFI
> config is placed and it could be conflicting with the new UEFI image.
>
> Cmd> flash
>
>
> Switching on main power...
> PMIC RAM configuration (pms_v105.bin)...
> IOFPGA config: PASSED
> Enabling usb remote...
>
>
> Flash> ERASERANGE 0x0BFC0000 0x0BFF0000
>
> I will looking into that further.
Still behaves the same, stopping at:
FV2 Hob 0xFE07B000 - 0xFE8253BF
--
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.
next prev parent reply other threads:[~2016-11-08 16:13 UTC|newest]
Thread overview: 116+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-03 4:52 [PATCH 0/8] firmware: arm_scpi: add support for legacy SCPI protocol Sudeep Holla
2016-11-03 4:52 ` Sudeep Holla
2016-11-03 4:52 ` Sudeep Holla
2016-11-03 4:52 ` Sudeep Holla
2016-11-03 4:52 ` [PATCH v5 1/8] firmware: arm_scpi: add command indirection to support legacy commands Sudeep Holla
2016-11-03 4:52 ` Sudeep Holla
2016-11-03 4:52 ` Sudeep Holla
2016-11-03 4:52 ` [PATCH v5 2/8] firmware: arm_scpi: increase MAX_DVFS_OPPS to 16 entries Sudeep Holla
2016-11-03 4:52 ` Sudeep Holla
2016-11-03 4:52 ` Sudeep Holla
2016-11-03 4:52 ` Sudeep Holla
2016-11-03 4:52 ` [PATCH v5 3/8] firmware: arm_scpi: add alternative legacy structures, functions and macros Sudeep Holla
2016-11-03 4:52 ` Sudeep Holla
2016-11-03 4:52 ` Sudeep Holla
2016-11-03 4:52 ` Sudeep Holla
2016-11-03 4:52 ` [PATCH v5 4/8] firmware: arm_scpi: allow firmware with get_capabilities not implemented Sudeep Holla
2016-11-03 4:52 ` Sudeep Holla
2016-11-03 4:52 ` Sudeep Holla
2016-11-03 4:52 ` Sudeep Holla
2016-11-03 4:52 ` [PATCH v5 5/8] Documentation: bindings: decouple juno specific details from generic binding Sudeep Holla
2016-11-03 4:52 ` Sudeep Holla
2016-11-03 4:52 ` Sudeep Holla
2016-11-10 1:18 ` Rob Herring
2016-11-10 1:18 ` Rob Herring
2016-11-10 1:18 ` Rob Herring
2016-11-03 4:52 ` [PATCH v5 6/8] Documentation: bindings: add compatible specific to legacy SCPI protocol Sudeep Holla
2016-11-03 4:52 ` Sudeep Holla
2016-11-03 4:52 ` Sudeep Holla
2016-11-08 14:32 ` Sudeep Holla
2016-11-08 14:32 ` Sudeep Holla
2016-11-08 14:32 ` Sudeep Holla
2016-11-08 14:32 ` Sudeep Holla
2016-11-10 1:22 ` Rob Herring
2016-11-10 1:22 ` Rob Herring
2016-11-10 1:22 ` Rob Herring
2016-11-10 1:22 ` Rob Herring
2016-11-10 10:26 ` Sudeep Holla
2016-11-10 10:26 ` Sudeep Holla
2016-11-10 10:26 ` Sudeep Holla
2016-11-10 10:26 ` Sudeep Holla
2016-11-10 14:12 ` Rob Herring
2016-11-10 14:12 ` Rob Herring
2016-11-10 14:12 ` Rob Herring
2016-11-10 14:12 ` Rob Herring
2016-11-10 14:34 ` Sudeep Holla
2016-11-10 14:34 ` Sudeep Holla
2016-11-10 14:34 ` Sudeep Holla
2016-11-10 14:34 ` Sudeep Holla
2016-11-10 19:03 ` Olof Johansson
2016-11-10 19:03 ` Olof Johansson
2016-11-10 19:03 ` Olof Johansson
2016-11-10 19:03 ` Olof Johansson
2016-11-11 7:48 ` Sudeep Holla
2016-11-11 7:48 ` Sudeep Holla
2016-11-11 7:48 ` Sudeep Holla
2016-11-11 7:48 ` Sudeep Holla
2016-11-11 13:34 ` Rob Herring
2016-11-11 13:34 ` Rob Herring
2016-11-11 13:34 ` Rob Herring
2016-11-11 13:34 ` Rob Herring
2016-11-11 14:19 ` Sudeep Holla
2016-11-11 14:19 ` Sudeep Holla
2016-11-11 14:19 ` Sudeep Holla
2016-11-11 14:19 ` Sudeep Holla
2016-11-15 16:36 ` Sudeep Holla
2016-11-15 16:36 ` Sudeep Holla
2016-11-15 16:36 ` Sudeep Holla
2016-11-15 16:36 ` Sudeep Holla
2016-11-03 4:52 ` [PATCH v5 7/8] Documentation: bindings: Add support for Amlogic GXBB " Sudeep Holla
2016-11-03 4:52 ` Sudeep Holla
2016-11-03 4:52 ` Sudeep Holla
2016-11-03 4:52 ` Sudeep Holla
2016-11-10 1:23 ` Rob Herring
2016-11-10 1:23 ` Rob Herring
2016-11-10 1:23 ` Rob Herring
2016-11-10 1:23 ` Rob Herring
2016-11-03 4:52 ` [PATCH v5 8/8] firmware: arm_scpi: add support for legacy SCPI compatible Sudeep Holla
2016-11-03 4:52 ` Sudeep Holla
2016-11-03 4:52 ` Sudeep Holla
2016-11-03 9:12 ` [PATCH 0/8] firmware: arm_scpi: add support for legacy SCPI protocol Neil Armstrong
2016-11-03 9:12 ` Neil Armstrong
2016-11-03 9:12 ` Neil Armstrong
2016-11-08 14:51 ` Russell King - ARM Linux
2016-11-08 14:51 ` Russell King - ARM Linux
2016-11-08 14:51 ` Russell King - ARM Linux
2016-11-08 14:51 ` Russell King - ARM Linux
2016-11-08 15:11 ` Sudeep Holla
2016-11-08 15:11 ` Sudeep Holla
2016-11-08 15:11 ` Sudeep Holla
2016-11-08 15:11 ` Sudeep Holla
2016-11-08 15:40 ` Russell King - ARM Linux
2016-11-08 15:40 ` Russell King - ARM Linux
2016-11-08 15:40 ` Russell King - ARM Linux
2016-11-08 16:06 ` Russell King - ARM Linux
2016-11-08 16:06 ` Russell King - ARM Linux
2016-11-08 16:06 ` Russell King - ARM Linux
2016-11-08 17:37 ` Sudeep Holla
2016-11-08 17:37 ` Sudeep Holla
2016-11-08 17:37 ` Sudeep Holla
2016-11-08 17:46 ` Russell King - ARM Linux
2016-11-08 17:46 ` Russell King - ARM Linux
2016-11-08 17:46 ` Russell King - ARM Linux
2016-11-21 15:04 ` Ryan Harkin
2016-11-21 15:04 ` Ryan Harkin
2016-11-21 15:04 ` Ryan Harkin
2016-11-21 15:04 ` Ryan Harkin
2016-11-21 15:12 ` Sudeep Holla
2016-11-21 15:12 ` Sudeep Holla
2016-11-21 15:12 ` Sudeep Holla
2016-11-21 15:12 ` Sudeep Holla
2016-11-08 16:08 ` Sudeep Holla
2016-11-08 16:08 ` Sudeep Holla
2016-11-08 16:08 ` Sudeep Holla
2016-11-08 16:13 ` Russell King - ARM Linux [this message]
2016-11-08 16:13 ` Russell King - ARM Linux
2016-11-08 16:13 ` Russell King - ARM Linux
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161108161331.GV1041@n2100.armlinux.org.uk \
--to=linux@armlinux.org.uk \
--cc=devicetree@vger.kernel.org \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=narmstrong@baylibre.com \
--cc=olof@lixom.net \
--cc=sudeep.holla@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.