From: Peter Ujfalusi <peter.ujfalusi@ti.com> To: <vinod.koul@intel.com>, <dan.j.williams@intel.com> Cc: <dmaengine@vger.kernel.org>, <linux-kernel@vger.kernel.org>, <linux-omap@vger.kernel.org>, <aaro.koskinen@iki.fi>, <tony@atomide.com>, <stable@vger.kernel.org> Subject: [PATCH] dmaengine: omap-dma: Fix dynamic lch_map alocation Date: Mon, 2 Jan 2017 12:07:37 +0200 [thread overview] Message-ID: <20170102100737.11927-1-peter.ujfalusi@ti.com> (raw) The original patch did not done what it was supposed to be doing and even worst it broke legacy boot (OMAP1). The lch_map size should be the number of available logical channels in sDMA and the od->dma_requests should store the number of available DMA request lines usable in sDMA. In legacy mode we do not have a way to get the DMA request count, in that case we use OMAP_SDMA_REQUESTS (127), despite the fact that OMAP1510 have only 31 DMA request line. Fixes: 2d1a9a946fae ("dmaengine: omap-dma: Dynamically allocate memory for lch_map") Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: stable@vger.kernel.org # v4.9 Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> --- drivers/dma/omap-dma.c | 30 +++++++++++++++++++++--------- 1 file changed, 21 insertions(+), 9 deletions(-) diff --git a/drivers/dma/omap-dma.c b/drivers/dma/omap-dma.c index ac68666cd3f4..4ad101a47e0a 100644 --- a/drivers/dma/omap-dma.c +++ b/drivers/dma/omap-dma.c @@ -1452,6 +1452,7 @@ static int omap_dma_probe(struct platform_device *pdev) struct omap_dmadev *od; struct resource *res; int rc, i, irq; + u32 lch_count; od = devm_kzalloc(&pdev->dev, sizeof(*od), GFP_KERNEL); if (!od) @@ -1494,20 +1495,31 @@ static int omap_dma_probe(struct platform_device *pdev) spin_lock_init(&od->lock); spin_lock_init(&od->irq_lock); - if (!pdev->dev.of_node) { - od->dma_requests = od->plat->dma_attr->lch_count; - if (unlikely(!od->dma_requests)) - od->dma_requests = OMAP_SDMA_REQUESTS; - } else if (of_property_read_u32(pdev->dev.of_node, "dma-requests", - &od->dma_requests)) { + /* Number of DMA requests */ + od->dma_requests = OMAP_SDMA_REQUESTS; + if (pdev->dev.of_node && of_property_read_u32(pdev->dev.of_node, + "dma-requests", + &od->dma_requests)) { dev_info(&pdev->dev, "Missing dma-requests property, using %u.\n", OMAP_SDMA_REQUESTS); - od->dma_requests = OMAP_SDMA_REQUESTS; } - od->lch_map = devm_kcalloc(&pdev->dev, od->dma_requests, - sizeof(*od->lch_map), GFP_KERNEL); + /* Number of available logical channels */ + if (!pdev->dev.of_node) { + lch_count = od->plat->dma_attr->lch_count; + if (unlikely(!lch_count)) + lch_count = OMAP_SDMA_CHANNELS; + } else if (of_property_read_u32(pdev->dev.of_node, "dma-channels", + &lch_count)) { + dev_info(&pdev->dev, + "Missing dma-channels property, using %u.\n", + OMAP_SDMA_CHANNELS); + lch_count = OMAP_SDMA_CHANNELS; + } + + od->lch_map = devm_kcalloc(&pdev->dev, lch_count, sizeof(*od->lch_map), + GFP_KERNEL); if (!od->lch_map) return -ENOMEM; -- 2.11.0
WARNING: multiple messages have this Message-ID (diff)
From: Peter Ujfalusi <peter.ujfalusi@ti.com> To: vinod.koul@intel.com, dan.j.williams@intel.com Cc: dmaengine@vger.kernel.org, linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org, aaro.koskinen@iki.fi, tony@atomide.com, stable@vger.kernel.org Subject: [PATCH] dmaengine: omap-dma: Fix dynamic lch_map alocation Date: Mon, 2 Jan 2017 12:07:37 +0200 [thread overview] Message-ID: <20170102100737.11927-1-peter.ujfalusi@ti.com> (raw) The original patch did not done what it was supposed to be doing and even worst it broke legacy boot (OMAP1). The lch_map size should be the number of available logical channels in sDMA and the od->dma_requests should store the number of available DMA request lines usable in sDMA. In legacy mode we do not have a way to get the DMA request count, in that case we use OMAP_SDMA_REQUESTS (127), despite the fact that OMAP1510 have only 31 DMA request line. Fixes: 2d1a9a946fae ("dmaengine: omap-dma: Dynamically allocate memory for lch_map") Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: stable@vger.kernel.org # v4.9 Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> --- drivers/dma/omap-dma.c | 30 +++++++++++++++++++++--------- 1 file changed, 21 insertions(+), 9 deletions(-) diff --git a/drivers/dma/omap-dma.c b/drivers/dma/omap-dma.c index ac68666cd3f4..4ad101a47e0a 100644 --- a/drivers/dma/omap-dma.c +++ b/drivers/dma/omap-dma.c @@ -1452,6 +1452,7 @@ static int omap_dma_probe(struct platform_device *pdev) struct omap_dmadev *od; struct resource *res; int rc, i, irq; + u32 lch_count; od = devm_kzalloc(&pdev->dev, sizeof(*od), GFP_KERNEL); if (!od) @@ -1494,20 +1495,31 @@ static int omap_dma_probe(struct platform_device *pdev) spin_lock_init(&od->lock); spin_lock_init(&od->irq_lock); - if (!pdev->dev.of_node) { - od->dma_requests = od->plat->dma_attr->lch_count; - if (unlikely(!od->dma_requests)) - od->dma_requests = OMAP_SDMA_REQUESTS; - } else if (of_property_read_u32(pdev->dev.of_node, "dma-requests", - &od->dma_requests)) { + /* Number of DMA requests */ + od->dma_requests = OMAP_SDMA_REQUESTS; + if (pdev->dev.of_node && of_property_read_u32(pdev->dev.of_node, + "dma-requests", + &od->dma_requests)) { dev_info(&pdev->dev, "Missing dma-requests property, using %u.\n", OMAP_SDMA_REQUESTS); - od->dma_requests = OMAP_SDMA_REQUESTS; } - od->lch_map = devm_kcalloc(&pdev->dev, od->dma_requests, - sizeof(*od->lch_map), GFP_KERNEL); + /* Number of available logical channels */ + if (!pdev->dev.of_node) { + lch_count = od->plat->dma_attr->lch_count; + if (unlikely(!lch_count)) + lch_count = OMAP_SDMA_CHANNELS; + } else if (of_property_read_u32(pdev->dev.of_node, "dma-channels", + &lch_count)) { + dev_info(&pdev->dev, + "Missing dma-channels property, using %u.\n", + OMAP_SDMA_CHANNELS); + lch_count = OMAP_SDMA_CHANNELS; + } + + od->lch_map = devm_kcalloc(&pdev->dev, lch_count, sizeof(*od->lch_map), + GFP_KERNEL); if (!od->lch_map) return -ENOMEM; -- 2.11.0
next reply other threads:[~2017-01-02 10:07 UTC|newest] Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top 2017-01-02 10:07 Peter Ujfalusi [this message] 2017-01-02 10:07 ` [PATCH] dmaengine: omap-dma: Fix dynamic lch_map alocation Peter Ujfalusi 2017-01-02 10:09 ` Peter Ujfalusi 2017-01-02 10:09 ` Peter Ujfalusi 2017-01-02 10:09 ` Peter Ujfalusi 2017-01-02 10:21 ` Vinod Koul 2017-01-02 10:23 ` Peter Ujfalusi 2017-01-02 10:23 ` Peter Ujfalusi 2017-01-02 10:23 ` Peter Ujfalusi 2017-01-03 3:41 ` Vinod Koul 2017-01-02 19:13 ` Aaro Koskinen
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20170102100737.11927-1-peter.ujfalusi@ti.com \ --to=peter.ujfalusi@ti.com \ --cc=aaro.koskinen@iki.fi \ --cc=dan.j.williams@intel.com \ --cc=dmaengine@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-omap@vger.kernel.org \ --cc=stable@vger.kernel.org \ --cc=tony@atomide.com \ --cc=vinod.koul@intel.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.