From: Maxime Ripard <maxime.ripard@free-electrons.com>
To: Chen-Yu Tsai <wens@csie.org>
Cc: Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@codeaurora.org>,
linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-sunxi@googlegroups.com
Subject: Re: [PATCH 07/11] clk: sunxi-ng: Add A80 Display Engine CCU
Date: Thu, 26 Jan 2017 11:39:28 +0100 [thread overview]
Message-ID: <20170126103928.3kmvymoafsz5jfjm@lukather> (raw)
In-Reply-To: <20170124023230.3990-8-wens@csie.org>
[-- Attachment #1: Type: text/plain, Size: 7556 bytes --]
Hi,
On Tue, Jan 24, 2017 at 10:32:26AM +0800, Chen-Yu Tsai wrote:
> Add support for the display engine clock controls found on the A80.
>
> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
> ---
> .../devicetree/bindings/clock/sun9i-de.txt | 28 ++
> drivers/clk/sunxi-ng/Makefile | 1 +
> drivers/clk/sunxi-ng/ccu-sun9i-a80-de.c | 283 +++++++++++++++++++++
> drivers/clk/sunxi-ng/ccu-sun9i-a80-de.h | 33 +++
> include/dt-bindings/clock/sun9i-a80-de.h | 80 ++++++
> include/dt-bindings/reset/sun9i-a80-de.h | 58 +++++
> 6 files changed, 483 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/clock/sun9i-de.txt
> create mode 100644 drivers/clk/sunxi-ng/ccu-sun9i-a80-de.c
> create mode 100644 drivers/clk/sunxi-ng/ccu-sun9i-a80-de.h
> create mode 100644 include/dt-bindings/clock/sun9i-a80-de.h
> create mode 100644 include/dt-bindings/reset/sun9i-a80-de.h
>
> diff --git a/Documentation/devicetree/bindings/clock/sun9i-de.txt b/Documentation/devicetree/bindings/clock/sun9i-de.txt
> new file mode 100644
> index 000000000000..3a5e6df70677
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/sun9i-de.txt
> @@ -0,0 +1,28 @@
> +Allwinner A80 Display Engine Clock Control Binding
> +------------------------------------
> +
> +Required properties :
> +- compatible: must contain one of the following compatibles:
> + - "allwinner,sun9i-a80-de-clocks"
> +
> +- reg: Must contain the registers base address and length
> +- clocks: phandle to the clocks feeding the display engine subsystem.
> + Three are needed:
> + - "mod": the display engine module clock
> + - "dram": the DRAM bus clock for the system
> + - "bus": the bus clock for the whole display engine subsystem
> +- clock-names: Must contain the clock names described just above
> +- resets: phandle to the reset control for the display engine subsystem.
> +- #clock-cells : must contain 1
> +- #reset-cells : must contain 1
> +
> +Example:
> +de_clocks: clock@03000000 {
> + compatible = "allwinner,sun9i-a80-de-clks";
> + reg = <0x03000000 0x30>;
> + clocks = <&ccu CLK_DE>, <&ccu CLK_SDRAM>, <&ccu CLK_BUS_DE>;
> + clock-names = "mod", "dram", "bus";
> + resets = <&ccu RST_BUS_DE>;
> + #clock-cells = <1>;
> + #reset-cells = <1>;
> +};
> diff --git a/drivers/clk/sunxi-ng/Makefile b/drivers/clk/sunxi-ng/Makefile
> index 8f37ef7fb67d..6feaac0c5600 100644
> --- a/drivers/clk/sunxi-ng/Makefile
> +++ b/drivers/clk/sunxi-ng/Makefile
> @@ -26,4 +26,5 @@ obj-$(CONFIG_SUN8I_A33_CCU) += ccu-sun8i-a33.o
> obj-$(CONFIG_SUN8I_H3_CCU) += ccu-sun8i-h3.o
> obj-$(CONFIG_SUN8I_V3S_CCU) += ccu-sun8i-v3s.o
> obj-$(CONFIG_SUN9I_A80_CCU) += ccu-sun9i-a80.o
> +obj-$(CONFIG_SUN9I_A80_CCU) += ccu-sun9i-a80-de.o
> obj-$(CONFIG_SUN9I_A80_CCU) += ccu-sun9i-a80-usb.o
> diff --git a/drivers/clk/sunxi-ng/ccu-sun9i-a80-de.c b/drivers/clk/sunxi-ng/ccu-sun9i-a80-de.c
> new file mode 100644
> index 000000000000..3fc27db0a49a
> --- /dev/null
> +++ b/drivers/clk/sunxi-ng/ccu-sun9i-a80-de.c
> @@ -0,0 +1,283 @@
> +/*
> + * Copyright (c) 2016 Chen-Yu Tsai. All rights reserved.
> + *
> + * This software is licensed under the terms of the GNU General Public
> + * License version 2, as published by the Free Software Foundation, and
> + * may be copied, distributed, and modified under those terms.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/clk-provider.h>
> +#include <linux/of_address.h>
> +#include <linux/platform_device.h>
> +#include <linux/reset.h>
> +
> +#include "ccu_common.h"
> +#include "ccu_div.h"
> +#include "ccu_gate.h"
> +#include "ccu_reset.h"
> +
> +#include "ccu-sun9i-a80-de.h"
> +
> +static SUNXI_CCU_GATE(fe0_clk, "fe0", "fe0-div",
> + 0x00, BIT(0), 0);
> +static SUNXI_CCU_GATE(fe1_clk, "fe1", "fe1-div",
> + 0x00, BIT(1), 0);
> +static SUNXI_CCU_GATE(fe2_clk, "fe2", "fe2-div",
> + 0x00, BIT(2), 0);
> +static SUNXI_CCU_GATE(iep_deu0_clk, "iep-deu0", "de",
> + 0x00, BIT(4), 0);
> +static SUNXI_CCU_GATE(iep_deu1_clk, "iep-deu1", "de",
> + 0x00, BIT(5), 0);
> +static SUNXI_CCU_GATE(be0_clk, "be0", "be0-div",
> + 0x00, BIT(8), 0);
> +static SUNXI_CCU_GATE(be1_clk, "be1", "be1-div",
> + 0x00, BIT(9), 0);
> +static SUNXI_CCU_GATE(be2_clk, "be2", "be2-div",
> + 0x00, BIT(10), 0);
> +static SUNXI_CCU_GATE(iep_drc0_clk, "iep-drc0", "de",
> + 0x00, BIT(12), 0);
> +static SUNXI_CCU_GATE(iep_drc1_clk, "iep-drc1", "de",
> + 0x00, BIT(13), 0);
> +static SUNXI_CCU_GATE(merge_clk, "merge", "de",
> + 0x00, BIT(20), 0);
> +
> +static SUNXI_CCU_GATE(dram_fe0_clk, "dram-fe0", "sdram",
> + 0x04, BIT(0), 0);
> +static SUNXI_CCU_GATE(dram_fe1_clk, "dram-fe1", "sdram",
> + 0x04, BIT(1), 0);
> +static SUNXI_CCU_GATE(dram_fe2_clk, "dram-fe2", "sdram",
> + 0x04, BIT(2), 0);
> +static SUNXI_CCU_GATE(dram_deu0_clk, "dram-deu0", "sdram",
> + 0x04, BIT(4), 0);
> +static SUNXI_CCU_GATE(dram_deu1_clk, "dram-deu1", "sdram",
> + 0x04, BIT(5), 0);
> +static SUNXI_CCU_GATE(dram_be0_clk, "dram-be0", "sdram",
> + 0x04, BIT(8), 0);
> +static SUNXI_CCU_GATE(dram_be1_clk, "dram-be1", "sdram",
> + 0x04, BIT(9), 0);
> +static SUNXI_CCU_GATE(dram_be2_clk, "dram-be2", "sdram",
> + 0x04, BIT(10), 0);
> +static SUNXI_CCU_GATE(dram_drc0_clk, "dram-drc0", "sdram",
> + 0x04, BIT(12), 0);
> +static SUNXI_CCU_GATE(dram_drc1_clk, "dram-drc1", "sdram",
> + 0x04, BIT(13), 0);
> +
> +static SUNXI_CCU_GATE(bus_fe0_clk, "bus-fe0", "bus-de",
> + 0x08, BIT(0), 0);
> +static SUNXI_CCU_GATE(bus_fe1_clk, "bus-fe1", "bus-de",
> + 0x08, BIT(1), 0);
> +static SUNXI_CCU_GATE(bus_fe2_clk, "bus-fe2", "bus-de",
> + 0x08, BIT(2), 0);
> +static SUNXI_CCU_GATE(bus_deu0_clk, "bus-deu0", "bus-de",
> + 0x08, BIT(4), 0);
> +static SUNXI_CCU_GATE(bus_deu1_clk, "bus-deu1", "bus-de",
> + 0x08, BIT(5), 0);
> +static SUNXI_CCU_GATE(bus_be0_clk, "bus-be0", "bus-de",
> + 0x08, BIT(8), 0);
> +static SUNXI_CCU_GATE(bus_be1_clk, "bus-be1", "bus-de",
> + 0x08, BIT(9), 0);
> +static SUNXI_CCU_GATE(bus_be2_clk, "bus-be2", "bus-de",
> + 0x08, BIT(10), 0);
> +static SUNXI_CCU_GATE(bus_drc0_clk, "bus-drc0", "bus-de",
> + 0x08, BIT(12), 0);
> +static SUNXI_CCU_GATE(bus_drc1_clk, "bus-drc1", "bus-de",
> + 0x08, BIT(13), 0);
> +
> +static SUNXI_CCU_M(fe0_div_clk, "fe0-div", "de", 0x20, 0, 4, 0);
> +static SUNXI_CCU_M(fe1_div_clk, "fe1-div", "de", 0x20, 4, 4, 0);
> +static SUNXI_CCU_M(fe2_div_clk, "fe2-div", "de", 0x20, 8, 4, 0);
> +static SUNXI_CCU_M(be0_div_clk, "be0-div", "de", 0x20, 16, 4, 0);
> +static SUNXI_CCU_M(be1_div_clk, "be1-div", "de", 0x20, 20, 4, 0);
> +static SUNXI_CCU_M(be2_div_clk, "be2-div", "de", 0x20, 24, 4, 0);
I couldn't find any documentation for this CCU.
What are those clocks for, and how the display engine should be using
(ie, which one is it expecting to drive / ungate / etc.)
Thanks!
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 801 bytes --]
WARNING: multiple messages have this Message-ID (diff)
From: maxime.ripard@free-electrons.com (Maxime Ripard)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 07/11] clk: sunxi-ng: Add A80 Display Engine CCU
Date: Thu, 26 Jan 2017 11:39:28 +0100 [thread overview]
Message-ID: <20170126103928.3kmvymoafsz5jfjm@lukather> (raw)
In-Reply-To: <20170124023230.3990-8-wens@csie.org>
Hi,
On Tue, Jan 24, 2017 at 10:32:26AM +0800, Chen-Yu Tsai wrote:
> Add support for the display engine clock controls found on the A80.
>
> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
> ---
> .../devicetree/bindings/clock/sun9i-de.txt | 28 ++
> drivers/clk/sunxi-ng/Makefile | 1 +
> drivers/clk/sunxi-ng/ccu-sun9i-a80-de.c | 283 +++++++++++++++++++++
> drivers/clk/sunxi-ng/ccu-sun9i-a80-de.h | 33 +++
> include/dt-bindings/clock/sun9i-a80-de.h | 80 ++++++
> include/dt-bindings/reset/sun9i-a80-de.h | 58 +++++
> 6 files changed, 483 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/clock/sun9i-de.txt
> create mode 100644 drivers/clk/sunxi-ng/ccu-sun9i-a80-de.c
> create mode 100644 drivers/clk/sunxi-ng/ccu-sun9i-a80-de.h
> create mode 100644 include/dt-bindings/clock/sun9i-a80-de.h
> create mode 100644 include/dt-bindings/reset/sun9i-a80-de.h
>
> diff --git a/Documentation/devicetree/bindings/clock/sun9i-de.txt b/Documentation/devicetree/bindings/clock/sun9i-de.txt
> new file mode 100644
> index 000000000000..3a5e6df70677
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/sun9i-de.txt
> @@ -0,0 +1,28 @@
> +Allwinner A80 Display Engine Clock Control Binding
> +------------------------------------
> +
> +Required properties :
> +- compatible: must contain one of the following compatibles:
> + - "allwinner,sun9i-a80-de-clocks"
> +
> +- reg: Must contain the registers base address and length
> +- clocks: phandle to the clocks feeding the display engine subsystem.
> + Three are needed:
> + - "mod": the display engine module clock
> + - "dram": the DRAM bus clock for the system
> + - "bus": the bus clock for the whole display engine subsystem
> +- clock-names: Must contain the clock names described just above
> +- resets: phandle to the reset control for the display engine subsystem.
> +- #clock-cells : must contain 1
> +- #reset-cells : must contain 1
> +
> +Example:
> +de_clocks: clock at 03000000 {
> + compatible = "allwinner,sun9i-a80-de-clks";
> + reg = <0x03000000 0x30>;
> + clocks = <&ccu CLK_DE>, <&ccu CLK_SDRAM>, <&ccu CLK_BUS_DE>;
> + clock-names = "mod", "dram", "bus";
> + resets = <&ccu RST_BUS_DE>;
> + #clock-cells = <1>;
> + #reset-cells = <1>;
> +};
> diff --git a/drivers/clk/sunxi-ng/Makefile b/drivers/clk/sunxi-ng/Makefile
> index 8f37ef7fb67d..6feaac0c5600 100644
> --- a/drivers/clk/sunxi-ng/Makefile
> +++ b/drivers/clk/sunxi-ng/Makefile
> @@ -26,4 +26,5 @@ obj-$(CONFIG_SUN8I_A33_CCU) += ccu-sun8i-a33.o
> obj-$(CONFIG_SUN8I_H3_CCU) += ccu-sun8i-h3.o
> obj-$(CONFIG_SUN8I_V3S_CCU) += ccu-sun8i-v3s.o
> obj-$(CONFIG_SUN9I_A80_CCU) += ccu-sun9i-a80.o
> +obj-$(CONFIG_SUN9I_A80_CCU) += ccu-sun9i-a80-de.o
> obj-$(CONFIG_SUN9I_A80_CCU) += ccu-sun9i-a80-usb.o
> diff --git a/drivers/clk/sunxi-ng/ccu-sun9i-a80-de.c b/drivers/clk/sunxi-ng/ccu-sun9i-a80-de.c
> new file mode 100644
> index 000000000000..3fc27db0a49a
> --- /dev/null
> +++ b/drivers/clk/sunxi-ng/ccu-sun9i-a80-de.c
> @@ -0,0 +1,283 @@
> +/*
> + * Copyright (c) 2016 Chen-Yu Tsai. All rights reserved.
> + *
> + * This software is licensed under the terms of the GNU General Public
> + * License version 2, as published by the Free Software Foundation, and
> + * may be copied, distributed, and modified under those terms.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/clk-provider.h>
> +#include <linux/of_address.h>
> +#include <linux/platform_device.h>
> +#include <linux/reset.h>
> +
> +#include "ccu_common.h"
> +#include "ccu_div.h"
> +#include "ccu_gate.h"
> +#include "ccu_reset.h"
> +
> +#include "ccu-sun9i-a80-de.h"
> +
> +static SUNXI_CCU_GATE(fe0_clk, "fe0", "fe0-div",
> + 0x00, BIT(0), 0);
> +static SUNXI_CCU_GATE(fe1_clk, "fe1", "fe1-div",
> + 0x00, BIT(1), 0);
> +static SUNXI_CCU_GATE(fe2_clk, "fe2", "fe2-div",
> + 0x00, BIT(2), 0);
> +static SUNXI_CCU_GATE(iep_deu0_clk, "iep-deu0", "de",
> + 0x00, BIT(4), 0);
> +static SUNXI_CCU_GATE(iep_deu1_clk, "iep-deu1", "de",
> + 0x00, BIT(5), 0);
> +static SUNXI_CCU_GATE(be0_clk, "be0", "be0-div",
> + 0x00, BIT(8), 0);
> +static SUNXI_CCU_GATE(be1_clk, "be1", "be1-div",
> + 0x00, BIT(9), 0);
> +static SUNXI_CCU_GATE(be2_clk, "be2", "be2-div",
> + 0x00, BIT(10), 0);
> +static SUNXI_CCU_GATE(iep_drc0_clk, "iep-drc0", "de",
> + 0x00, BIT(12), 0);
> +static SUNXI_CCU_GATE(iep_drc1_clk, "iep-drc1", "de",
> + 0x00, BIT(13), 0);
> +static SUNXI_CCU_GATE(merge_clk, "merge", "de",
> + 0x00, BIT(20), 0);
> +
> +static SUNXI_CCU_GATE(dram_fe0_clk, "dram-fe0", "sdram",
> + 0x04, BIT(0), 0);
> +static SUNXI_CCU_GATE(dram_fe1_clk, "dram-fe1", "sdram",
> + 0x04, BIT(1), 0);
> +static SUNXI_CCU_GATE(dram_fe2_clk, "dram-fe2", "sdram",
> + 0x04, BIT(2), 0);
> +static SUNXI_CCU_GATE(dram_deu0_clk, "dram-deu0", "sdram",
> + 0x04, BIT(4), 0);
> +static SUNXI_CCU_GATE(dram_deu1_clk, "dram-deu1", "sdram",
> + 0x04, BIT(5), 0);
> +static SUNXI_CCU_GATE(dram_be0_clk, "dram-be0", "sdram",
> + 0x04, BIT(8), 0);
> +static SUNXI_CCU_GATE(dram_be1_clk, "dram-be1", "sdram",
> + 0x04, BIT(9), 0);
> +static SUNXI_CCU_GATE(dram_be2_clk, "dram-be2", "sdram",
> + 0x04, BIT(10), 0);
> +static SUNXI_CCU_GATE(dram_drc0_clk, "dram-drc0", "sdram",
> + 0x04, BIT(12), 0);
> +static SUNXI_CCU_GATE(dram_drc1_clk, "dram-drc1", "sdram",
> + 0x04, BIT(13), 0);
> +
> +static SUNXI_CCU_GATE(bus_fe0_clk, "bus-fe0", "bus-de",
> + 0x08, BIT(0), 0);
> +static SUNXI_CCU_GATE(bus_fe1_clk, "bus-fe1", "bus-de",
> + 0x08, BIT(1), 0);
> +static SUNXI_CCU_GATE(bus_fe2_clk, "bus-fe2", "bus-de",
> + 0x08, BIT(2), 0);
> +static SUNXI_CCU_GATE(bus_deu0_clk, "bus-deu0", "bus-de",
> + 0x08, BIT(4), 0);
> +static SUNXI_CCU_GATE(bus_deu1_clk, "bus-deu1", "bus-de",
> + 0x08, BIT(5), 0);
> +static SUNXI_CCU_GATE(bus_be0_clk, "bus-be0", "bus-de",
> + 0x08, BIT(8), 0);
> +static SUNXI_CCU_GATE(bus_be1_clk, "bus-be1", "bus-de",
> + 0x08, BIT(9), 0);
> +static SUNXI_CCU_GATE(bus_be2_clk, "bus-be2", "bus-de",
> + 0x08, BIT(10), 0);
> +static SUNXI_CCU_GATE(bus_drc0_clk, "bus-drc0", "bus-de",
> + 0x08, BIT(12), 0);
> +static SUNXI_CCU_GATE(bus_drc1_clk, "bus-drc1", "bus-de",
> + 0x08, BIT(13), 0);
> +
> +static SUNXI_CCU_M(fe0_div_clk, "fe0-div", "de", 0x20, 0, 4, 0);
> +static SUNXI_CCU_M(fe1_div_clk, "fe1-div", "de", 0x20, 4, 4, 0);
> +static SUNXI_CCU_M(fe2_div_clk, "fe2-div", "de", 0x20, 8, 4, 0);
> +static SUNXI_CCU_M(be0_div_clk, "be0-div", "de", 0x20, 16, 4, 0);
> +static SUNXI_CCU_M(be1_div_clk, "be1-div", "de", 0x20, 20, 4, 0);
> +static SUNXI_CCU_M(be2_div_clk, "be2-div", "de", 0x20, 24, 4, 0);
I couldn't find any documentation for this CCU.
What are those clocks for, and how the display engine should be using
(ie, which one is it expecting to drive / ungate / etc.)
Thanks!
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 801 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20170126/a34655da/attachment-0001.sig>
next prev parent reply other threads:[~2017-01-26 10:39 UTC|newest]
Thread overview: 94+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-24 2:32 [PATCH 00/11] clk: sunxi-ng: Add support for A80 CCUs Chen-Yu Tsai
2017-01-24 2:32 ` Chen-Yu Tsai
2017-01-24 2:32 ` Chen-Yu Tsai
2017-01-24 2:32 ` [PATCH 01/11] clk: sunxi-ng: mux: Fix determine_rate for mux clocks with pre-dividers Chen-Yu Tsai
2017-01-24 2:32 ` Chen-Yu Tsai
2017-01-24 2:32 ` Chen-Yu Tsai
2017-01-26 9:55 ` Maxime Ripard
2017-01-26 9:55 ` Maxime Ripard
2017-01-26 9:55 ` Maxime Ripard
2017-01-26 11:22 ` Chen-Yu Tsai
2017-01-26 11:22 ` Chen-Yu Tsai
2017-01-24 2:32 ` [PATCH 02/11] clk: sunxi-ng: mux: honor CLK_SET_RATE_NO_REPARENT flag Chen-Yu Tsai
2017-01-24 2:32 ` Chen-Yu Tsai
2017-01-24 2:32 ` Chen-Yu Tsai
2017-01-24 2:32 ` [PATCH 03/11] clk: sunxi-ng: mux: Get closest parent rate possible with CLK_SET_RATE_PARENT Chen-Yu Tsai
2017-01-24 2:32 ` Chen-Yu Tsai
2017-01-24 2:32 ` Chen-Yu Tsai
2017-01-24 2:32 ` [PATCH 04/11] clk: sunxi-ng: Support separately grouped PLL lock status register Chen-Yu Tsai
2017-01-24 2:32 ` Chen-Yu Tsai
2017-01-24 2:32 ` Chen-Yu Tsai
2017-01-26 9:57 ` Maxime Ripard
2017-01-26 9:57 ` Maxime Ripard
2017-01-24 2:32 ` [PATCH 05/11] clk: sunxi-ng: Add A80 CCU Chen-Yu Tsai
2017-01-24 2:32 ` Chen-Yu Tsai
2017-01-24 2:32 ` Chen-Yu Tsai
2017-01-27 21:13 ` Rob Herring
2017-01-27 21:13 ` Rob Herring
2017-01-27 21:13 ` Rob Herring
2017-01-24 2:32 ` [PATCH 06/11] clk: sunxi-ng: Add A80 USB CCU Chen-Yu Tsai
2017-01-24 2:32 ` Chen-Yu Tsai
2017-01-24 2:32 ` Chen-Yu Tsai
2017-01-26 10:14 ` Maxime Ripard
2017-01-26 10:14 ` Maxime Ripard
2017-01-26 10:14 ` Maxime Ripard
2017-01-26 11:12 ` [linux-sunxi] " Chen-Yu Tsai
2017-01-26 11:12 ` Chen-Yu Tsai
2017-01-27 8:45 ` Maxime Ripard
2017-01-27 8:45 ` Maxime Ripard
2017-01-27 8:45 ` Maxime Ripard
2017-01-27 21:15 ` Rob Herring
2017-01-27 21:15 ` Rob Herring
2017-01-27 21:15 ` Rob Herring
2017-01-24 2:32 ` [PATCH 07/11] clk: sunxi-ng: Add A80 Display Engine CCU Chen-Yu Tsai
2017-01-24 2:32 ` Chen-Yu Tsai
2017-01-24 2:32 ` Chen-Yu Tsai
2017-01-26 10:39 ` Maxime Ripard [this message]
2017-01-26 10:39 ` Maxime Ripard
2017-01-26 11:20 ` Chen-Yu Tsai
2017-01-26 11:20 ` Chen-Yu Tsai
2017-01-26 11:20 ` Chen-Yu Tsai
2017-01-27 8:58 ` Maxime Ripard
2017-01-27 8:58 ` Maxime Ripard
2017-01-27 8:58 ` Maxime Ripard
2017-01-27 9:26 ` Chen-Yu Tsai
2017-01-27 9:26 ` Chen-Yu Tsai
2017-01-27 9:26 ` Chen-Yu Tsai
2017-01-27 9:42 ` Maxime Ripard
2017-01-27 9:42 ` Maxime Ripard
2017-01-27 9:42 ` Maxime Ripard
2017-01-24 2:32 ` [PATCH 08/11] ARM: dts: sun8i-a23-q8-tablet: Drop pinmux setting for codec PA gpio Chen-Yu Tsai
2017-01-24 2:32 ` Chen-Yu Tsai
2017-01-24 2:32 ` Chen-Yu Tsai
2017-01-26 10:38 ` Maxime Ripard
2017-01-26 10:38 ` Maxime Ripard
2017-01-26 10:38 ` Maxime Ripard
2017-01-26 11:15 ` Chen-Yu Tsai
2017-01-26 11:15 ` Chen-Yu Tsai
2017-01-24 2:32 ` [PATCH 09/11] ARM: dts: sunxi: Remove no longer used pinctrl/sun4i-a10.h header Chen-Yu Tsai
2017-01-24 2:32 ` Chen-Yu Tsai
2017-01-24 2:32 ` Chen-Yu Tsai
2017-01-26 10:21 ` Maxime Ripard
2017-01-26 10:21 ` Maxime Ripard
2017-01-26 10:21 ` Maxime Ripard
2017-01-24 2:32 ` [PATCH 10/11] arm64: dts: allwinner: " Chen-Yu Tsai
2017-01-24 2:32 ` Chen-Yu Tsai
2017-01-24 2:32 ` Chen-Yu Tsai
2017-01-26 10:15 ` Maxime Ripard
2017-01-26 10:15 ` Maxime Ripard
2017-01-26 10:15 ` Maxime Ripard
2017-01-26 11:23 ` Chen-Yu Tsai
2017-01-26 11:23 ` Chen-Yu Tsai
2017-01-26 11:23 ` Chen-Yu Tsai
2017-01-27 8:46 ` Maxime Ripard
2017-01-27 8:46 ` Maxime Ripard
2017-01-27 8:46 ` Maxime Ripard
2017-01-24 2:32 ` [PATCH 11/11] ARM: dts: sun9i: Switch to new clock bindings Chen-Yu Tsai
2017-01-24 2:32 ` Chen-Yu Tsai
2017-01-24 2:32 ` Chen-Yu Tsai
2017-01-24 6:03 ` [linux-sunxi] [PATCH 00/11] clk: sunxi-ng: Add support for A80 CCUs Priit Laes
2017-01-24 6:03 ` Priit Laes
2017-01-24 6:03 ` Priit Laes
2017-01-24 6:03 ` Priit Laes
2017-01-24 6:50 [PATCH 07/11] clk: sunxi-ng: Add A80 Display Engine CCU Icenowy Zheng
2017-01-24 6:50 ` Icenowy Zheng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170126103928.3kmvymoafsz5jfjm@lukather \
--to=maxime.ripard@free-electrons.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=mark.rutland@arm.com \
--cc=mturquette@baylibre.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@codeaurora.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.