From: Hans Verkuil <hverkuil-qWit8jRvyhVmR6Xm/wNWPw@public.gmane.org> To: linux-media-u79uwXL29TY76Z2rM5mHXA@public.gmane.org Cc: Daniel Vetter <daniel.vetter-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>, Russell King <linux-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org>, dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org, linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Krzysztof Kozlowski <krzk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>, Inki Dae <inki.dae-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>, Marek Szyprowski <m.szyprowski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>, Javier Martinez Canillas <javier-JPH+aEBZ4P+UEJcrhfAQsw@public.gmane.org>, Benjamin Gaignard <benjamin.gaignard-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>, Hans Verkuil <hans.verkuil-FYB4Gu1CFyUAvxtiuMwx3w@public.gmane.org>, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org Subject: [PATCHv4 8/9] stih-cec: add HPD notifier support Date: Mon, 6 Feb 2017 11:29:50 +0100 [thread overview] Message-ID: <20170206102951.12623-9-hverkuil@xs4all.nl> (raw) In-Reply-To: <20170206102951.12623-1-hverkuil-qWit8jRvyhVmR6Xm/wNWPw@public.gmane.org> From: Benjamin Gaignard <benjamin.gaignard-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> By using the HPD notifier framework there is no longer any reason to manually set the physical address. This was the one blocking issue that prevented this driver from going out of staging, so do this move as well. Update the bindings documentation the new hdmi phandle. Signed-off-by: Benjamin Gaignard <benjamin.gaignard-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> Signed-off-by: Hans Verkuil <hans.verkuil-FYB4Gu1CFyUAvxtiuMwx3w@public.gmane.org> CC: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org --- .../devicetree/bindings/media/stih-cec.txt | 2 ++ drivers/media/platform/Kconfig | 10 +++++++ drivers/media/platform/Makefile | 1 + .../st-cec => media/platform/sti/cec}/Makefile | 0 .../st-cec => media/platform/sti/cec}/stih-cec.c | 31 +++++++++++++++++++--- drivers/staging/media/Kconfig | 2 -- drivers/staging/media/Makefile | 1 - drivers/staging/media/st-cec/Kconfig | 8 ------ drivers/staging/media/st-cec/TODO | 7 ----- 9 files changed, 41 insertions(+), 21 deletions(-) rename drivers/{staging/media/st-cec => media/platform/sti/cec}/Makefile (100%) rename drivers/{staging/media/st-cec => media/platform/sti/cec}/stih-cec.c (93%) delete mode 100644 drivers/staging/media/st-cec/Kconfig delete mode 100644 drivers/staging/media/st-cec/TODO diff --git a/Documentation/devicetree/bindings/media/stih-cec.txt b/Documentation/devicetree/bindings/media/stih-cec.txt index 71c4b2f4bcef..7d82121d148a 100644 --- a/Documentation/devicetree/bindings/media/stih-cec.txt +++ b/Documentation/devicetree/bindings/media/stih-cec.txt @@ -9,6 +9,7 @@ Required properties: - pinctrl-names: Contains only one value - "default" - pinctrl-0: Specifies the pin control groups used for CEC hardware. - resets: Reference to a reset controller + - st,hdmi-handle: Phandle to the HMDI controller Example for STIH407: @@ -22,4 +23,5 @@ sti-cec@094a087c { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_cec0_default>; resets = <&softreset STIH407_LPM_SOFTRESET>; + st,hdmi-handle = <&hdmi>; }; diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig index 9920726f14d2..46db8a32a931 100644 --- a/drivers/media/platform/Kconfig +++ b/drivers/media/platform/Kconfig @@ -422,6 +422,16 @@ config VIDEO_SAMSUNG_S5P_CEC CEC bus is present in the HDMI connector and enables communication between compatible devices. +config VIDEO_STI_HDMI_CEC + tristate "STMicroelectronics STiH4xx HDMI CEC driver" + depends on VIDEO_DEV && MEDIA_CEC_SUPPORT && (ARCH_STI || COMPILE_TEST) + select HPD_NOTIFIER + ---help--- + This is a driver for STIH4xx HDMI CEC interface. It uses the + generic CEC framework interface. + CEC bus is present in the HDMI connector and enables communication + between compatible devices. + endif #V4L_CEC_DRIVERS menuconfig V4L_TEST_DRIVERS diff --git a/drivers/media/platform/Makefile b/drivers/media/platform/Makefile index ad3bf22bfeae..01b689c10f69 100644 --- a/drivers/media/platform/Makefile +++ b/drivers/media/platform/Makefile @@ -39,6 +39,7 @@ obj-$(CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC) += exynos-gsc/ obj-$(CONFIG_VIDEO_STI_BDISP) += sti/bdisp/ obj-$(CONFIG_VIDEO_STI_HVA) += sti/hva/ obj-$(CONFIG_DVB_C8SECTPFE) += sti/c8sectpfe/ +obj-$(CONFIG_VIDEO_STI_HDMI_CEC) += sti/cec/ obj-$(CONFIG_BLACKFIN) += blackfin/ diff --git a/drivers/staging/media/st-cec/Makefile b/drivers/media/platform/sti/cec/Makefile similarity index 100% rename from drivers/staging/media/st-cec/Makefile rename to drivers/media/platform/sti/cec/Makefile diff --git a/drivers/staging/media/st-cec/stih-cec.c b/drivers/media/platform/sti/cec/stih-cec.c similarity index 93% rename from drivers/staging/media/st-cec/stih-cec.c rename to drivers/media/platform/sti/cec/stih-cec.c index 3c25638a9610..e50e916837fd 100644 --- a/drivers/staging/media/st-cec/stih-cec.c +++ b/drivers/media/platform/sti/cec/stih-cec.c @@ -1,6 +1,4 @@ /* - * drivers/staging/media/st-cec/stih-cec.c - * * STIH4xx CEC driver * Copyright (C) STMicroelectronic SA 2016 * @@ -10,11 +8,13 @@ * (at your option) any later version. */ #include <linux/clk.h> +#include <linux/hpd-notifier.h> #include <linux/interrupt.h> #include <linux/kernel.h> #include <linux/mfd/syscon.h> #include <linux/module.h> #include <linux/of.h> +#include <linux/of_platform.h> #include <linux/platform_device.h> #include <media/cec.h> @@ -129,6 +129,7 @@ struct stih_cec { void __iomem *regs; int irq; u32 irq_status; + struct hpd_notifier *notifier; }; static int stih_cec_adap_enable(struct cec_adapter *adap, bool enable) @@ -303,12 +304,29 @@ static int stih_cec_probe(struct platform_device *pdev) struct device *dev = &pdev->dev; struct resource *res; struct stih_cec *cec; + struct device_node *np; + struct platform_device *hdmi_dev; int ret; cec = devm_kzalloc(dev, sizeof(*cec), GFP_KERNEL); if (!cec) return -ENOMEM; + np = of_parse_phandle(pdev->dev.of_node, "st,hdmi-handle", 0); + + if (!np) { + dev_err(&pdev->dev, "Failed to find hdmi node in device tree\n"); + return -ENODEV; + } + + hdmi_dev = of_find_device_by_node(np); + if (!hdmi_dev) + return -EPROBE_DEFER; + + cec->notifier = hpd_notifier_get(&hdmi_dev->dev); + if (!cec->notifier) + return -ENOMEM; + cec->dev = dev; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -335,7 +353,7 @@ static int stih_cec_probe(struct platform_device *pdev) cec->adap = cec_allocate_adapter(&sti_cec_adap_ops, cec, CEC_NAME, CEC_CAP_LOG_ADDRS | CEC_CAP_PASSTHROUGH | - CEC_CAP_PHYS_ADDR | CEC_CAP_TRANSMIT, 1); + CEC_CAP_TRANSMIT, 1); ret = PTR_ERR_OR_ZERO(cec->adap); if (ret) return ret; @@ -346,12 +364,19 @@ static int stih_cec_probe(struct platform_device *pdev) return ret; } + cec_register_hpd_notifier(cec->adap, cec->notifier); + platform_set_drvdata(pdev, cec); return 0; } static int stih_cec_remove(struct platform_device *pdev) { + struct stih_cec *cec = platform_get_drvdata(pdev); + + cec_unregister_adapter(cec->adap); + hpd_notifier_put(cec->notifier); + return 0; } diff --git a/drivers/staging/media/Kconfig b/drivers/staging/media/Kconfig index 1b7804cf4c51..d4f50f02c76e 100644 --- a/drivers/staging/media/Kconfig +++ b/drivers/staging/media/Kconfig @@ -30,6 +30,4 @@ source "drivers/staging/media/omap4iss/Kconfig" # Keep LIRC at the end, as it has sub-menus source "drivers/staging/media/lirc/Kconfig" -source "drivers/staging/media/st-cec/Kconfig" - endif diff --git a/drivers/staging/media/Makefile b/drivers/staging/media/Makefile index e11afbf99452..4c9bb23c9628 100644 --- a/drivers/staging/media/Makefile +++ b/drivers/staging/media/Makefile @@ -3,4 +3,3 @@ obj-$(CONFIG_DVB_CXD2099) += cxd2099/ obj-$(CONFIG_LIRC_STAGING) += lirc/ obj-$(CONFIG_VIDEO_DM365_VPFE) += davinci_vpfe/ obj-$(CONFIG_VIDEO_OMAP4) += omap4iss/ -obj-$(CONFIG_VIDEO_STI_HDMI_CEC) += st-cec/ diff --git a/drivers/staging/media/st-cec/Kconfig b/drivers/staging/media/st-cec/Kconfig deleted file mode 100644 index c04283db58d6..000000000000 --- a/drivers/staging/media/st-cec/Kconfig +++ /dev/null @@ -1,8 +0,0 @@ -config VIDEO_STI_HDMI_CEC - tristate "STMicroelectronics STiH4xx HDMI CEC driver" - depends on VIDEO_DEV && MEDIA_CEC_SUPPORT && (ARCH_STI || COMPILE_TEST) - ---help--- - This is a driver for STIH4xx HDMI CEC interface. It uses the - generic CEC framework interface. - CEC bus is present in the HDMI connector and enables communication - between compatible devices. diff --git a/drivers/staging/media/st-cec/TODO b/drivers/staging/media/st-cec/TODO deleted file mode 100644 index c61289742c5c..000000000000 --- a/drivers/staging/media/st-cec/TODO +++ /dev/null @@ -1,7 +0,0 @@ -This driver requires that userspace sets the physical address. -However, this should be passed on from the corresponding -ST HDMI driver. - -We have to wait until the HDMI notifier framework has been merged -in order to handle this gracefully, until that time this driver -has to remain in staging. -- 2.11.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: Hans Verkuil <hverkuil@xs4all.nl> To: linux-media@vger.kernel.org Cc: Daniel Vetter <daniel.vetter@intel.com>, Russell King <linux@armlinux.org.uk>, dri-devel@lists.freedesktop.org, linux-samsung-soc@vger.kernel.org, Krzysztof Kozlowski <krzk@kernel.org>, Inki Dae <inki.dae@samsung.com>, Marek Szyprowski <m.szyprowski@samsung.com>, Javier Martinez Canillas <javier@osg.samsung.com>, Benjamin Gaignard <benjamin.gaignard@linaro.org>, Hans Verkuil <hans.verkuil@cisco.com>, devicetree@vger.kernel.org Subject: [PATCHv4 8/9] stih-cec: add HPD notifier support Date: Mon, 6 Feb 2017 11:29:50 +0100 [thread overview] Message-ID: <20170206102951.12623-9-hverkuil@xs4all.nl> (raw) In-Reply-To: <20170206102951.12623-1-hverkuil@xs4all.nl> From: Benjamin Gaignard <benjamin.gaignard@linaro.org> By using the HPD notifier framework there is no longer any reason to manually set the physical address. This was the one blocking issue that prevented this driver from going out of staging, so do this move as well. Update the bindings documentation the new hdmi phandle. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> CC: devicetree@vger.kernel.org --- .../devicetree/bindings/media/stih-cec.txt | 2 ++ drivers/media/platform/Kconfig | 10 +++++++ drivers/media/platform/Makefile | 1 + .../st-cec => media/platform/sti/cec}/Makefile | 0 .../st-cec => media/platform/sti/cec}/stih-cec.c | 31 +++++++++++++++++++--- drivers/staging/media/Kconfig | 2 -- drivers/staging/media/Makefile | 1 - drivers/staging/media/st-cec/Kconfig | 8 ------ drivers/staging/media/st-cec/TODO | 7 ----- 9 files changed, 41 insertions(+), 21 deletions(-) rename drivers/{staging/media/st-cec => media/platform/sti/cec}/Makefile (100%) rename drivers/{staging/media/st-cec => media/platform/sti/cec}/stih-cec.c (93%) delete mode 100644 drivers/staging/media/st-cec/Kconfig delete mode 100644 drivers/staging/media/st-cec/TODO diff --git a/Documentation/devicetree/bindings/media/stih-cec.txt b/Documentation/devicetree/bindings/media/stih-cec.txt index 71c4b2f4bcef..7d82121d148a 100644 --- a/Documentation/devicetree/bindings/media/stih-cec.txt +++ b/Documentation/devicetree/bindings/media/stih-cec.txt @@ -9,6 +9,7 @@ Required properties: - pinctrl-names: Contains only one value - "default" - pinctrl-0: Specifies the pin control groups used for CEC hardware. - resets: Reference to a reset controller + - st,hdmi-handle: Phandle to the HMDI controller Example for STIH407: @@ -22,4 +23,5 @@ sti-cec@094a087c { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_cec0_default>; resets = <&softreset STIH407_LPM_SOFTRESET>; + st,hdmi-handle = <&hdmi>; }; diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig index 9920726f14d2..46db8a32a931 100644 --- a/drivers/media/platform/Kconfig +++ b/drivers/media/platform/Kconfig @@ -422,6 +422,16 @@ config VIDEO_SAMSUNG_S5P_CEC CEC bus is present in the HDMI connector and enables communication between compatible devices. +config VIDEO_STI_HDMI_CEC + tristate "STMicroelectronics STiH4xx HDMI CEC driver" + depends on VIDEO_DEV && MEDIA_CEC_SUPPORT && (ARCH_STI || COMPILE_TEST) + select HPD_NOTIFIER + ---help--- + This is a driver for STIH4xx HDMI CEC interface. It uses the + generic CEC framework interface. + CEC bus is present in the HDMI connector and enables communication + between compatible devices. + endif #V4L_CEC_DRIVERS menuconfig V4L_TEST_DRIVERS diff --git a/drivers/media/platform/Makefile b/drivers/media/platform/Makefile index ad3bf22bfeae..01b689c10f69 100644 --- a/drivers/media/platform/Makefile +++ b/drivers/media/platform/Makefile @@ -39,6 +39,7 @@ obj-$(CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC) += exynos-gsc/ obj-$(CONFIG_VIDEO_STI_BDISP) += sti/bdisp/ obj-$(CONFIG_VIDEO_STI_HVA) += sti/hva/ obj-$(CONFIG_DVB_C8SECTPFE) += sti/c8sectpfe/ +obj-$(CONFIG_VIDEO_STI_HDMI_CEC) += sti/cec/ obj-$(CONFIG_BLACKFIN) += blackfin/ diff --git a/drivers/staging/media/st-cec/Makefile b/drivers/media/platform/sti/cec/Makefile similarity index 100% rename from drivers/staging/media/st-cec/Makefile rename to drivers/media/platform/sti/cec/Makefile diff --git a/drivers/staging/media/st-cec/stih-cec.c b/drivers/media/platform/sti/cec/stih-cec.c similarity index 93% rename from drivers/staging/media/st-cec/stih-cec.c rename to drivers/media/platform/sti/cec/stih-cec.c index 3c25638a9610..e50e916837fd 100644 --- a/drivers/staging/media/st-cec/stih-cec.c +++ b/drivers/media/platform/sti/cec/stih-cec.c @@ -1,6 +1,4 @@ /* - * drivers/staging/media/st-cec/stih-cec.c - * * STIH4xx CEC driver * Copyright (C) STMicroelectronic SA 2016 * @@ -10,11 +8,13 @@ * (at your option) any later version. */ #include <linux/clk.h> +#include <linux/hpd-notifier.h> #include <linux/interrupt.h> #include <linux/kernel.h> #include <linux/mfd/syscon.h> #include <linux/module.h> #include <linux/of.h> +#include <linux/of_platform.h> #include <linux/platform_device.h> #include <media/cec.h> @@ -129,6 +129,7 @@ struct stih_cec { void __iomem *regs; int irq; u32 irq_status; + struct hpd_notifier *notifier; }; static int stih_cec_adap_enable(struct cec_adapter *adap, bool enable) @@ -303,12 +304,29 @@ static int stih_cec_probe(struct platform_device *pdev) struct device *dev = &pdev->dev; struct resource *res; struct stih_cec *cec; + struct device_node *np; + struct platform_device *hdmi_dev; int ret; cec = devm_kzalloc(dev, sizeof(*cec), GFP_KERNEL); if (!cec) return -ENOMEM; + np = of_parse_phandle(pdev->dev.of_node, "st,hdmi-handle", 0); + + if (!np) { + dev_err(&pdev->dev, "Failed to find hdmi node in device tree\n"); + return -ENODEV; + } + + hdmi_dev = of_find_device_by_node(np); + if (!hdmi_dev) + return -EPROBE_DEFER; + + cec->notifier = hpd_notifier_get(&hdmi_dev->dev); + if (!cec->notifier) + return -ENOMEM; + cec->dev = dev; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -335,7 +353,7 @@ static int stih_cec_probe(struct platform_device *pdev) cec->adap = cec_allocate_adapter(&sti_cec_adap_ops, cec, CEC_NAME, CEC_CAP_LOG_ADDRS | CEC_CAP_PASSTHROUGH | - CEC_CAP_PHYS_ADDR | CEC_CAP_TRANSMIT, 1); + CEC_CAP_TRANSMIT, 1); ret = PTR_ERR_OR_ZERO(cec->adap); if (ret) return ret; @@ -346,12 +364,19 @@ static int stih_cec_probe(struct platform_device *pdev) return ret; } + cec_register_hpd_notifier(cec->adap, cec->notifier); + platform_set_drvdata(pdev, cec); return 0; } static int stih_cec_remove(struct platform_device *pdev) { + struct stih_cec *cec = platform_get_drvdata(pdev); + + cec_unregister_adapter(cec->adap); + hpd_notifier_put(cec->notifier); + return 0; } diff --git a/drivers/staging/media/Kconfig b/drivers/staging/media/Kconfig index 1b7804cf4c51..d4f50f02c76e 100644 --- a/drivers/staging/media/Kconfig +++ b/drivers/staging/media/Kconfig @@ -30,6 +30,4 @@ source "drivers/staging/media/omap4iss/Kconfig" # Keep LIRC at the end, as it has sub-menus source "drivers/staging/media/lirc/Kconfig" -source "drivers/staging/media/st-cec/Kconfig" - endif diff --git a/drivers/staging/media/Makefile b/drivers/staging/media/Makefile index e11afbf99452..4c9bb23c9628 100644 --- a/drivers/staging/media/Makefile +++ b/drivers/staging/media/Makefile @@ -3,4 +3,3 @@ obj-$(CONFIG_DVB_CXD2099) += cxd2099/ obj-$(CONFIG_LIRC_STAGING) += lirc/ obj-$(CONFIG_VIDEO_DM365_VPFE) += davinci_vpfe/ obj-$(CONFIG_VIDEO_OMAP4) += omap4iss/ -obj-$(CONFIG_VIDEO_STI_HDMI_CEC) += st-cec/ diff --git a/drivers/staging/media/st-cec/Kconfig b/drivers/staging/media/st-cec/Kconfig deleted file mode 100644 index c04283db58d6..000000000000 --- a/drivers/staging/media/st-cec/Kconfig +++ /dev/null @@ -1,8 +0,0 @@ -config VIDEO_STI_HDMI_CEC - tristate "STMicroelectronics STiH4xx HDMI CEC driver" - depends on VIDEO_DEV && MEDIA_CEC_SUPPORT && (ARCH_STI || COMPILE_TEST) - ---help--- - This is a driver for STIH4xx HDMI CEC interface. It uses the - generic CEC framework interface. - CEC bus is present in the HDMI connector and enables communication - between compatible devices. diff --git a/drivers/staging/media/st-cec/TODO b/drivers/staging/media/st-cec/TODO deleted file mode 100644 index c61289742c5c..000000000000 --- a/drivers/staging/media/st-cec/TODO +++ /dev/null @@ -1,7 +0,0 @@ -This driver requires that userspace sets the physical address. -However, this should be passed on from the corresponding -ST HDMI driver. - -We have to wait until the HDMI notifier framework has been merged -in order to handle this gracefully, until that time this driver -has to remain in staging. -- 2.11.0
next prev parent reply other threads:[~2017-02-06 10:29 UTC|newest] Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top 2017-02-06 10:29 [PATCHv4 0/9] video/exynos/sti/cec: add HPD state notifier & use in drivers Hans Verkuil 2017-02-06 10:29 ` Hans Verkuil 2017-02-06 10:29 ` [PATCHv4 1/9] video: add hotplug detect notifier support Hans Verkuil 2017-02-06 13:08 ` Andrzej Hajda 2017-02-06 13:08 ` Andrzej Hajda 2017-02-27 16:08 ` Daniel Vetter 2017-02-27 16:08 ` Daniel Vetter 2017-02-27 17:04 ` Russell King - ARM Linux 2017-02-27 17:21 ` Hans Verkuil 2017-02-27 17:21 ` Hans Verkuil 2017-02-27 17:46 ` Russell King - ARM Linux 2017-02-28 8:51 ` Daniel Vetter 2017-02-28 8:51 ` Daniel Vetter 2017-02-28 9:23 ` Hans Verkuil 2017-02-28 9:23 ` Hans Verkuil 2017-02-28 9:45 ` Daniel Vetter 2017-02-28 9:45 ` Daniel Vetter 2017-02-06 10:29 ` [PATCHv4 2/9] exynos_hdmi: add HPD " Hans Verkuil 2017-02-06 10:29 ` Hans Verkuil 2017-02-06 10:29 ` [PATCHv4 3/9] cec: integrate " Hans Verkuil 2017-02-06 10:29 ` Hans Verkuil 2017-02-06 10:29 ` [PATCHv4 4/9] ARM: dts: exynos: add HDMI controller phandle to exynos4.dtsi Hans Verkuil 2017-02-06 10:29 ` Hans Verkuil 2017-02-06 10:29 ` [PATCHv4 6/9] s5p-cec: add hpd-notifier support, move out of staging Hans Verkuil 2017-02-06 10:29 ` [PATCHv4 7/9] sti: hdmi: add HPD notifier support Hans Verkuil [not found] ` <20170206102951.12623-1-hverkuil-qWit8jRvyhVmR6Xm/wNWPw@public.gmane.org> 2017-02-06 10:29 ` [PATCHv4 5/9] s5p-cec.txt: document the HDMI controller phandle Hans Verkuil 2017-02-06 10:29 ` Hans Verkuil 2017-02-06 10:29 ` Hans Verkuil [this message] 2017-02-06 10:29 ` [PATCHv4 8/9] stih-cec: add HPD notifier support Hans Verkuil 2017-02-08 23:17 ` Rob Herring 2017-02-08 23:17 ` Rob Herring 2017-02-06 10:29 ` [PATCHv4 9/9] arm: sti: update sti-cec for " Hans Verkuil 2017-02-06 10:29 ` Hans Verkuil
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20170206102951.12623-9-hverkuil@xs4all.nl \ --to=hverkuil-qwit8jrvyhvmr6xm/wnwpw@public.gmane.org \ --cc=benjamin.gaignard-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \ --cc=daniel.vetter-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \ --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \ --cc=dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \ --cc=hans.verkuil-FYB4Gu1CFyUAvxtiuMwx3w@public.gmane.org \ --cc=inki.dae-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org \ --cc=javier-JPH+aEBZ4P+UEJcrhfAQsw@public.gmane.org \ --cc=krzk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \ --cc=linux-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org \ --cc=linux-media-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \ --cc=linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \ --cc=m.szyprowski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.