[PATCH 5/6] drm/i915: use for_each_intel_connector_iter in intel_display.c

From: Daniel Vetter <daniel.vetter@ffwll.ch>
To: Intel Graphics Development <intel-gfx@lists.freedesktop.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>,
	Thierry Reding <thierry.reding@gmail.com>,
	Daniel Vetter <daniel.vetter@intel.com>
Subject: [PATCH 5/6] drm/i915: use for_each_intel_connector_iter in intel_display.c
Date: Wed,  1 Mar 2017 10:52:25 +0100	[thread overview]
Message-ID: <20170301095226.30584-5-daniel.vetter@ffwll.ch> (raw)
In-Reply-To: <20170301095226.30584-1-daniel.vetter@ffwll.ch>

This gets rid of the last users of for_each_intel_connector(), remove
that too.

At first I wasn't sure whether the 2 loops in the modeset state
checker should instead only loop over the connectors in the atomic
commit. But we never add connectors to an atomic update if they don't
(or won't have) a CRTC assigned, which means there'd be a gap in check
coverage. Hence loop over everything on those too.

v2: Rebase onto the iter_get/put->iter_begin/end rename.

Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
---
 drivers/gpu/drm/i915/i915_drv.h      |  5 -----
 drivers/gpu/drm/i915/intel_display.c | 20 ++++++++++++++++----
 2 files changed, 16 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index eb670d819134..32a67f438021 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -489,11 +489,6 @@ struct i915_hotplug {
 			    &(dev)->mode_config.encoder_list,	\
 			    base.head)
 
-#define for_each_intel_connector(dev, intel_connector)		\
-	list_for_each_entry(intel_connector,			\
-			    &(dev)->mode_config.connector_list,	\
-			    base.head)
-
 #define for_each_intel_connector_iter(intel_connector, iter) \
 	while ((intel_connector = to_intel_connector(drm_connector_list_iter_next(iter))))
 
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 0f30362b4ad8..f6560ab3531d 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -10977,8 +10977,10 @@ static const struct drm_crtc_helper_funcs intel_helper_funcs = {
 static void intel_modeset_update_connector_atomic_state(struct drm_device *dev)
 {
 	struct intel_connector *connector;
+	struct drm_connector_list_iter conn_iter;
 
-	for_each_intel_connector(dev, connector) {
+	drm_connector_list_iter_begin(dev, &conn_iter);
+	for_each_intel_connector_iter(connector, &conn_iter) {
 		if (connector->base.state->crtc)
 			drm_connector_unreference(&connector->base);
 
@@ -10994,6 +10996,7 @@ static void intel_modeset_update_connector_atomic_state(struct drm_device *dev)
 			connector->base.state->crtc = NULL;
 		}
 	}
+	drm_connector_list_iter_end(&conn_iter);
 }
 
 static void
@@ -11899,6 +11902,7 @@ verify_encoder_state(struct drm_device *dev)
 {
 	struct intel_encoder *encoder;
 	struct intel_connector *connector;
+	struct drm_connector_list_iter conn_iter;
 
 	for_each_intel_encoder(dev, encoder) {
 		bool enabled = false;
@@ -11908,7 +11912,8 @@ verify_encoder_state(struct drm_device *dev)
 			      encoder->base.base.id,
 			      encoder->base.name);
 
-		for_each_intel_connector(dev, connector) {
+		drm_connector_list_iter_begin(dev, &conn_iter);
+		for_each_intel_connector_iter(connector, &conn_iter) {
 			if (connector->base.state->best_encoder != &encoder->base)
 				continue;
 			enabled = true;
@@ -11917,6 +11922,7 @@ verify_encoder_state(struct drm_device *dev)
 					encoder->base.crtc,
 			     "connector's crtc doesn't match encoder crtc\n");
 		}
+		drm_connector_list_iter_end(&conn_iter);
 
 		I915_STATE_WARN(!!encoder->base.crtc != enabled,
 		     "encoder's enabled state mismatch "
@@ -15009,6 +15015,7 @@ int intel_modeset_init(struct drm_device *dev)
 static void intel_enable_pipe_a(struct drm_device *dev)
 {
 	struct intel_connector *connector;
+	struct drm_connector_list_iter conn_iter;
 	struct drm_connector *crt = NULL;
 	struct intel_load_detect_pipe load_detect_temp;
 	struct drm_modeset_acquire_ctx *ctx = dev->mode_config.acquire_ctx;
@@ -15016,12 +15023,14 @@ static void intel_enable_pipe_a(struct drm_device *dev)
 	/* We can't just switch on the pipe A, we need to set things up with a
 	 * proper mode and output configuration. As a gross hack, enable pipe A
 	 * by enabling the load detect pipe once. */
-	for_each_intel_connector(dev, connector) {
+	drm_connector_list_iter_begin(dev, &conn_iter);
+	for_each_intel_connector_iter(connector, &conn_iter) {
 		if (connector->encoder->type == INTEL_OUTPUT_ANALOG) {
 			crt = &connector->base;
 			break;
 		}
 	}
+	drm_connector_list_iter_end(&conn_iter);
 
 	if (!crt)
 		return;
@@ -15267,6 +15276,7 @@ static void intel_modeset_readout_hw_state(struct drm_device *dev)
 	struct intel_crtc *crtc;
 	struct intel_encoder *encoder;
 	struct intel_connector *connector;
+	struct drm_connector_list_iter conn_iter;
 	int i;
 
 	dev_priv->active_crtcs = 0;
@@ -15337,7 +15347,8 @@ static void intel_modeset_readout_hw_state(struct drm_device *dev)
 			      pipe_name(pipe));
 	}
 
-	for_each_intel_connector(dev, connector) {
+	drm_connector_list_iter_begin(dev, &conn_iter);
+	for_each_intel_connector_iter(connector, &conn_iter) {
 		if (connector->get_hw_state(connector)) {
 			connector->base.dpms = DRM_MODE_DPMS_ON;
 
@@ -15365,6 +15376,7 @@ static void intel_modeset_readout_hw_state(struct drm_device *dev)
 			      connector->base.base.id, connector->base.name,
 			      enableddisabled(connector->base.encoder));
 	}
+	drm_connector_list_iter_end(&conn_iter);
 
 	for_each_intel_crtc(dev, crtc) {
 		struct intel_crtc_state *crtc_state =
-- 
2.11.0

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
