All of lore.kernel.org
 help / color / mirror / Atom feed
From: Rob Herring <robh@kernel.org>
To: Linus Walleij <linus.walleij@linaro.org>
Cc: openwrt-devel@openwrt.org, devicetree@vger.kernel.org,
	Florian Fainelli <f.fainelli@gmail.com>,
	Feng-Hsin Chiang <john453@faraday-tech.com>,
	Paulius Zaleckas <paulius.zaleckas@gmail.com>,
	linux-pci@vger.kernel.org,
	Hans Ulli Kroll <ulli.kroll@googlemail.com>,
	Greentime Hu <green.hu@gmail.com>,
	Bjorn Helgaas <bhelgaas@google.com>,
	Janos Laube <janos.dev@gmail.com>,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 1/4 v3] PCI: add DT bindings for Faraday Technology PCI Host Bridge
Date: Thu, 2 Mar 2017 10:31:26 -0600	[thread overview]
Message-ID: <20170302163126.imrelpsfzeucfy3r@rob-hp-laptop> (raw)
In-Reply-To: <20170227190720.31409-1-linus.walleij@linaro.org>

On Mon, Feb 27, 2017 at 08:07:17PM +0100, Linus Walleij wrote:
> This adds device tree bindings for the Faraday technology PCI
> Host Bridge. This IP is found in the Storlink/Storm/Cortina
> Gemini SoC platform.
> 
> Cc: Janos Laube <janos.dev@gmail.com>
> Cc: Paulius Zaleckas <paulius.zaleckas@gmail.com>
> Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com>
> Cc: Florian Fainelli <f.fainelli@gmail.com>
> Cc: devicetree@vger.kernel.org
> Cc: Feng-Hsin Chiang <john453@faraday-tech.com>
> Cc: Greentime Hu <green.hu@gmail.com>
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
> ---
> ChangeLog v2->v3:
> - Reinstate the specific-to-generic bindings also specifying the
>   "cortina,gemini-pci" fixture for the Faraday block.
> - Set compatible to "faraday,ftpci100" and "faraday,ftpci100-dual"
>   this is clearly closer to or equal to what the IP blocks from
>   Faraday are actually named.
> - Add "dma-ranges" property, after deciphering that some hardcoded
>   constants in the driver is really about this.
> ChangeLog v1->v2:
> - Rename from Cortina prefixes to Faraday. This is clearly
>   a Faraday IP block.
> - Support both the version with cascaded interrupts and the
>   "dual" version with 1-to-1 mapped interrupts.
> - Change bus-range to <0x00 0xff>
> - Fix spelling mistake
> - Write a bit about swizzling interrupts on the interrupt
>   controller side
> - Reasonable swizzling in the interrupt mapping example
> 
> This can be merged to the PCI tree whenever it is considered
> fine for inclusion.
> ---
>  .../devicetree/bindings/pci/faraday,ftpci100.txt   | 129 +++++++++++++++++++++
>  1 file changed, 129 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pci/faraday,ftpci100.txt

Acked-by: Rob Herring <robh@kernel.org>

WARNING: multiple messages have this Message-ID (diff)
From: Rob Herring <robh@kernel.org>
To: Linus Walleij <linus.walleij@linaro.org>
Cc: openwrt-devel@openwrt.org, devicetree@vger.kernel.org,
	Florian Fainelli <f.fainelli@gmail.com>,
	Feng-Hsin Chiang <john453@faraday-tech.com>,
	Paulius Zaleckas <paulius.zaleckas@gmail.com>,
	linux-pci@vger.kernel.org,
	Hans Ulli Kroll <ulli.kroll@googlemail.com>,
	Greentime Hu <green.hu@gmail.com>,
	Bjorn Helgaas <bhelgaas@google.com>,
	Janos Laube <janos.dev@gmail.com>,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 1/4 v3] PCI: add DT bindings for Faraday Technology PCI Host Bridge
Date: Thu, 2 Mar 2017 10:31:26 -0600	[thread overview]
Message-ID: <20170302163126.imrelpsfzeucfy3r@rob-hp-laptop> (raw)
In-Reply-To: <20170227190720.31409-1-linus.walleij@linaro.org>

On Mon, Feb 27, 2017 at 08:07:17PM +0100, Linus Walleij wrote:
> This adds device tree bindings for the Faraday technology PCI
> Host Bridge. This IP is found in the Storlink/Storm/Cortina
> Gemini SoC platform.
> 
> Cc: Janos Laube <janos.dev@gmail.com>
> Cc: Paulius Zaleckas <paulius.zaleckas@gmail.com>
> Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com>
> Cc: Florian Fainelli <f.fainelli@gmail.com>
> Cc: devicetree@vger.kernel.org
> Cc: Feng-Hsin Chiang <john453@faraday-tech.com>
> Cc: Greentime Hu <green.hu@gmail.com>
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
> ---
> ChangeLog v2->v3:
> - Reinstate the specific-to-generic bindings also specifying the
>   "cortina,gemini-pci" fixture for the Faraday block.
> - Set compatible to "faraday,ftpci100" and "faraday,ftpci100-dual"
>   this is clearly closer to or equal to what the IP blocks from
>   Faraday are actually named.
> - Add "dma-ranges" property, after deciphering that some hardcoded
>   constants in the driver is really about this.
> ChangeLog v1->v2:
> - Rename from Cortina prefixes to Faraday. This is clearly
>   a Faraday IP block.
> - Support both the version with cascaded interrupts and the
>   "dual" version with 1-to-1 mapped interrupts.
> - Change bus-range to <0x00 0xff>
> - Fix spelling mistake
> - Write a bit about swizzling interrupts on the interrupt
>   controller side
> - Reasonable swizzling in the interrupt mapping example
> 
> This can be merged to the PCI tree whenever it is considered
> fine for inclusion.
> ---
>  .../devicetree/bindings/pci/faraday,ftpci100.txt   | 129 +++++++++++++++++++++
>  1 file changed, 129 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pci/faraday,ftpci100.txt

Acked-by: Rob Herring <robh@kernel.org>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: robh@kernel.org (Rob Herring)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/4 v3] PCI: add DT bindings for Faraday Technology PCI Host Bridge
Date: Thu, 2 Mar 2017 10:31:26 -0600	[thread overview]
Message-ID: <20170302163126.imrelpsfzeucfy3r@rob-hp-laptop> (raw)
In-Reply-To: <20170227190720.31409-1-linus.walleij@linaro.org>

On Mon, Feb 27, 2017 at 08:07:17PM +0100, Linus Walleij wrote:
> This adds device tree bindings for the Faraday technology PCI
> Host Bridge. This IP is found in the Storlink/Storm/Cortina
> Gemini SoC platform.
> 
> Cc: Janos Laube <janos.dev@gmail.com>
> Cc: Paulius Zaleckas <paulius.zaleckas@gmail.com>
> Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com>
> Cc: Florian Fainelli <f.fainelli@gmail.com>
> Cc: devicetree at vger.kernel.org
> Cc: Feng-Hsin Chiang <john453@faraday-tech.com>
> Cc: Greentime Hu <green.hu@gmail.com>
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
> ---
> ChangeLog v2->v3:
> - Reinstate the specific-to-generic bindings also specifying the
>   "cortina,gemini-pci" fixture for the Faraday block.
> - Set compatible to "faraday,ftpci100" and "faraday,ftpci100-dual"
>   this is clearly closer to or equal to what the IP blocks from
>   Faraday are actually named.
> - Add "dma-ranges" property, after deciphering that some hardcoded
>   constants in the driver is really about this.
> ChangeLog v1->v2:
> - Rename from Cortina prefixes to Faraday. This is clearly
>   a Faraday IP block.
> - Support both the version with cascaded interrupts and the
>   "dual" version with 1-to-1 mapped interrupts.
> - Change bus-range to <0x00 0xff>
> - Fix spelling mistake
> - Write a bit about swizzling interrupts on the interrupt
>   controller side
> - Reasonable swizzling in the interrupt mapping example
> 
> This can be merged to the PCI tree whenever it is considered
> fine for inclusion.
> ---
>  .../devicetree/bindings/pci/faraday,ftpci100.txt   | 129 +++++++++++++++++++++
>  1 file changed, 129 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pci/faraday,ftpci100.txt

Acked-by: Rob Herring <robh@kernel.org>

  parent reply	other threads:[~2017-03-02 16:31 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-02-27 19:07 [PATCH 1/4 v3] PCI: add DT bindings for Faraday Technology PCI Host Bridge Linus Walleij
2017-02-27 19:07 ` Linus Walleij
2017-02-27 19:07 ` Linus Walleij
2017-02-27 19:07 ` [PATCH 2/4 v3] PCI: add driver for Faraday Technology " Linus Walleij
2017-02-27 19:07   ` Linus Walleij
2017-02-27 19:07   ` Linus Walleij
2017-02-27 19:07 ` [PATCH 3/4 v3] ARM: gemini: select MIGHT_HAVE_PCI Linus Walleij
2017-02-27 19:07   ` Linus Walleij
2017-02-27 19:07   ` Linus Walleij
2017-03-02 16:29   ` Rob Herring
2017-03-02 16:29     ` Rob Herring
2017-03-02 16:29     ` Rob Herring
2017-03-02 23:31     ` Linus Walleij
2017-03-02 23:31       ` Linus Walleij
2017-03-02 23:31       ` Linus Walleij
2017-02-27 19:07 ` [PATCH 4/4 v3] ARM: dts: add PCI to the Gemini device trees Linus Walleij
2017-02-27 19:07   ` Linus Walleij
2017-02-27 19:07   ` Linus Walleij
2017-03-02 16:31 ` Rob Herring [this message]
2017-03-02 16:31   ` [PATCH 1/4 v3] PCI: add DT bindings for Faraday Technology PCI Host Bridge Rob Herring
2017-03-02 16:31   ` Rob Herring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170302163126.imrelpsfzeucfy3r@rob-hp-laptop \
    --to=robh@kernel.org \
    --cc=bhelgaas@google.com \
    --cc=devicetree@vger.kernel.org \
    --cc=f.fainelli@gmail.com \
    --cc=green.hu@gmail.com \
    --cc=janos.dev@gmail.com \
    --cc=john453@faraday-tech.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=openwrt-devel@openwrt.org \
    --cc=paulius.zaleckas@gmail.com \
    --cc=ulli.kroll@googlemail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.