From: Helmut Klein <hgkr.klein@gmail.com>
To: unlisted-recipients:; (no To-header on input)
Cc: Helmut Klein <hgkr.klein@gmail.com>,
linux-clk@vger.kernel.org, linux-serial@vger.kernel.org,
linux-amlogic@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org
Subject: [PATCH v3 0/4] tty/serial: meson_uart: add support for core clock handling
Date: Fri, 31 Mar 2017 18:54:33 +0200 [thread overview]
Message-ID: <20170331165437.26227-1-hgkr.klein@gmail.com> (raw)
To be able to use the three none AO uarts of the meson gx SoCs (uart_A,
uart_B & uart_C), the core clock has to be enabled (see chapter 22.3 of
the public s905 data sheet).
At least the u-boot of my s905 based media player (netxeon minimx-g)
doesn't do this. so the driver must enable the clock.
This patch set does:
- exposes the UART clock ids to the dtb
- adds documentation for the dt-bindings of meson_uart
- adds the core clock handling to the driver
- adds the core clock handling to meson-gxbb.dtsi and meson-gxl.dtsi
The patchset is based on the branch "master" of the repository in [1]
Changes since v2
- mail subjects reworked
- add clocks/clock-names to the documentation
- add core clock handling to meson-gxbb.dtsi & meson-gxl.dtsi
Changes since v1
- use git to produce the patch set
- added the clock ids for uart_B and uart_C
[1] git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic.git
Helmut Klein (4):
clk: meson: gxbb: expose CLKID_UARTx
dt-bindings: meson_uart: add documentation for meson UARTs
tty/serial: meson_uart: add the core clock handling to the driver
ARM64: dts: meson-gx: add core clock support for uart_A, uart_B and
uart_C
.../bindings/serial/amlogic,meson_uart.txt | 30 ++++++++++++++++++++++
arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 15 +++++++++++
arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 15 +++++++++++
drivers/clk/meson/gxbb.h | 6 ++---
drivers/tty/serial/meson_uart.c | 10 ++++++++
include/dt-bindings/clock/gxbb-clkc.h | 3 +++
6 files changed, 76 insertions(+), 3 deletions(-)
create mode 100644 Documentation/devicetree/bindings/serial/amlogic,meson_uart.txt
--
2.11.0
WARNING: multiple messages have this Message-ID (diff)
From: Helmut Klein <hgkr.klein@gmail.com>
Cc: Helmut Klein <hgkr.klein@gmail.com>,
linux-clk@vger.kernel.org, linux-serial@vger.kernel.org,
linux-amlogic@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org
Subject: [PATCH v3 0/4] tty/serial: meson_uart: add support for core clock handling
Date: Fri, 31 Mar 2017 18:54:33 +0200 [thread overview]
Message-ID: <20170331165437.26227-1-hgkr.klein@gmail.com> (raw)
To be able to use the three none AO uarts of the meson gx SoCs (uart_A,
uart_B & uart_C), the core clock has to be enabled (see chapter 22.3 of
the public s905 data sheet).
At least the u-boot of my s905 based media player (netxeon minimx-g)
doesn't do this. so the driver must enable the clock.
This patch set does:
- exposes the UART clock ids to the dtb
- adds documentation for the dt-bindings of meson_uart
- adds the core clock handling to the driver
- adds the core clock handling to meson-gxbb.dtsi and meson-gxl.dtsi
The patchset is based on the branch "master" of the repository in [1]
Changes since v2
- mail subjects reworked
- add clocks/clock-names to the documentation
- add core clock handling to meson-gxbb.dtsi & meson-gxl.dtsi
Changes since v1
- use git to produce the patch set
- added the clock ids for uart_B and uart_C
[1] git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic.git
Helmut Klein (4):
clk: meson: gxbb: expose CLKID_UARTx
dt-bindings: meson_uart: add documentation for meson UARTs
tty/serial: meson_uart: add the core clock handling to the driver
ARM64: dts: meson-gx: add core clock support for uart_A, uart_B and
uart_C
.../bindings/serial/amlogic,meson_uart.txt | 30 ++++++++++++++++++++++
arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 15 +++++++++++
arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 15 +++++++++++
drivers/clk/meson/gxbb.h | 6 ++---
drivers/tty/serial/meson_uart.c | 10 ++++++++
include/dt-bindings/clock/gxbb-clkc.h | 3 +++
6 files changed, 76 insertions(+), 3 deletions(-)
create mode 100644 Documentation/devicetree/bindings/serial/amlogic,meson_uart.txt
--
2.11.0
WARNING: multiple messages have this Message-ID (diff)
From: hgkr.klein@gmail.com (Helmut Klein)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 0/4] tty/serial: meson_uart: add support for core clock handling
Date: Fri, 31 Mar 2017 18:54:33 +0200 [thread overview]
Message-ID: <20170331165437.26227-1-hgkr.klein@gmail.com> (raw)
To be able to use the three none AO uarts of the meson gx SoCs (uart_A,
uart_B & uart_C), the core clock has to be enabled (see chapter 22.3 of
the public s905 data sheet).
At least the u-boot of my s905 based media player (netxeon minimx-g)
doesn't do this. so the driver must enable the clock.
This patch set does:
- exposes the UART clock ids to the dtb
- adds documentation for the dt-bindings of meson_uart
- adds the core clock handling to the driver
- adds the core clock handling to meson-gxbb.dtsi and meson-gxl.dtsi
The patchset is based on the branch "master" of the repository in [1]
Changes since v2
- mail subjects reworked
- add clocks/clock-names to the documentation
- add core clock handling to meson-gxbb.dtsi & meson-gxl.dtsi
Changes since v1
- use git to produce the patch set
- added the clock ids for uart_B and uart_C
[1] git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic.git
Helmut Klein (4):
clk: meson: gxbb: expose CLKID_UARTx
dt-bindings: meson_uart: add documentation for meson UARTs
tty/serial: meson_uart: add the core clock handling to the driver
ARM64: dts: meson-gx: add core clock support for uart_A, uart_B and
uart_C
.../bindings/serial/amlogic,meson_uart.txt | 30 ++++++++++++++++++++++
arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 15 +++++++++++
arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 15 +++++++++++
drivers/clk/meson/gxbb.h | 6 ++---
drivers/tty/serial/meson_uart.c | 10 ++++++++
include/dt-bindings/clock/gxbb-clkc.h | 3 +++
6 files changed, 76 insertions(+), 3 deletions(-)
create mode 100644 Documentation/devicetree/bindings/serial/amlogic,meson_uart.txt
--
2.11.0
WARNING: multiple messages have this Message-ID (diff)
From: hgkr.klein@gmail.com (Helmut Klein)
To: linus-amlogic@lists.infradead.org
Subject: [PATCH v3 0/4] tty/serial: meson_uart: add support for core clock handling
Date: Fri, 31 Mar 2017 18:54:33 +0200 [thread overview]
Message-ID: <20170331165437.26227-1-hgkr.klein@gmail.com> (raw)
To be able to use the three none AO uarts of the meson gx SoCs (uart_A,
uart_B & uart_C), the core clock has to be enabled (see chapter 22.3 of
the public s905 data sheet).
At least the u-boot of my s905 based media player (netxeon minimx-g)
doesn't do this. so the driver must enable the clock.
This patch set does:
- exposes the UART clock ids to the dtb
- adds documentation for the dt-bindings of meson_uart
- adds the core clock handling to the driver
- adds the core clock handling to meson-gxbb.dtsi and meson-gxl.dtsi
The patchset is based on the branch "master" of the repository in [1]
Changes since v2
- mail subjects reworked
- add clocks/clock-names to the documentation
- add core clock handling to meson-gxbb.dtsi & meson-gxl.dtsi
Changes since v1
- use git to produce the patch set
- added the clock ids for uart_B and uart_C
[1] git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic.git
Helmut Klein (4):
clk: meson: gxbb: expose CLKID_UARTx
dt-bindings: meson_uart: add documentation for meson UARTs
tty/serial: meson_uart: add the core clock handling to the driver
ARM64: dts: meson-gx: add core clock support for uart_A, uart_B and
uart_C
.../bindings/serial/amlogic,meson_uart.txt | 30 ++++++++++++++++++++++
arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 15 +++++++++++
arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 15 +++++++++++
drivers/clk/meson/gxbb.h | 6 ++---
drivers/tty/serial/meson_uart.c | 10 ++++++++
include/dt-bindings/clock/gxbb-clkc.h | 3 +++
6 files changed, 76 insertions(+), 3 deletions(-)
create mode 100644 Documentation/devicetree/bindings/serial/amlogic,meson_uart.txt
--
2.11.0
next reply other threads:[~2017-03-31 16:54 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-31 16:54 Helmut Klein [this message]
2017-03-31 16:54 ` [PATCH v3 0/4] tty/serial: meson_uart: add support for core clock handling Helmut Klein
2017-03-31 16:54 ` Helmut Klein
2017-03-31 16:54 ` Helmut Klein
2017-03-31 16:54 ` [PATCH v3 1/4] dt-bindings: clock: gxbb: expose UART clocks Helmut Klein
2017-03-31 16:54 ` Helmut Klein
2017-03-31 16:54 ` Helmut Klein
2017-03-31 16:54 ` Helmut Klein
2017-04-04 8:40 ` Michael Turquette
2017-04-04 8:40 ` Michael Turquette
2017-04-04 8:40 ` Michael Turquette
2017-04-04 8:40 ` Michael Turquette
2017-04-04 8:40 ` Michael Turquette
2017-05-23 9:17 ` Neil Armstrong
2017-05-23 9:17 ` Neil Armstrong
2017-05-23 9:17 ` Neil Armstrong
2017-05-23 9:17 ` Neil Armstrong
2017-03-31 16:54 ` [PATCH v3 2/4] dt-binding: meson_uart: add documentation for the UARTs of amlogic Helmut Klein
2017-03-31 16:54 ` Helmut Klein
2017-03-31 16:54 ` Helmut Klein
2017-04-03 16:52 ` Rob Herring
2017-04-03 16:52 ` Rob Herring
2017-04-03 16:52 ` Rob Herring
2017-05-05 21:43 ` Martin Blumenstingl
2017-05-05 21:43 ` Martin Blumenstingl
2017-05-05 21:43 ` Martin Blumenstingl
2017-05-05 21:43 ` Martin Blumenstingl
2017-03-31 16:54 ` [PATCH v3 3/4] tty/serial: meson_uart: add the core clock handling to the driver Helmut Klein
2017-03-31 16:54 ` Helmut Klein
2017-03-31 16:54 ` Helmut Klein
2017-04-03 14:57 ` Jerome Brunet
2017-04-03 14:57 ` Jerome Brunet
2017-04-03 14:57 ` Jerome Brunet
2017-04-03 15:31 ` Kevin Hilman
2017-04-03 15:31 ` Kevin Hilman
2017-04-03 15:31 ` Kevin Hilman
2017-04-03 15:31 ` Kevin Hilman
2017-03-31 16:54 ` [PATCH v3 4/4] ARM64: dts: meson-gx: add core clock support for uart_A, uart_B and uart_C Helmut Klein
2017-03-31 16:54 ` Helmut Klein
2017-03-31 16:54 ` Helmut Klein
2017-04-03 15:44 ` [PATCH v3 0/4] tty/serial: meson_uart: add support for core clock handling Kevin Hilman
2017-04-03 15:44 ` Kevin Hilman
2017-04-03 15:44 ` Kevin Hilman
2017-04-03 15:44 ` Kevin Hilman
2017-05-23 8:37 ` Neil Armstrong
2017-05-23 8:37 ` Neil Armstrong
2017-05-23 8:37 ` Neil Armstrong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170331165437.26227-1-hgkr.klein@gmail.com \
--to=hgkr.klein@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.