From: Randy Li <ayaka@soulik.info>
To: devicetree@vger.kernel.org
Cc: heiko@sntech.de, robh+dt@kernel.org, mark.rutland@arm.com,
linux@armlinux.org.uk, linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org,
Randy Li <ayaka@soulik.info>
Subject: [PATCH 0/2] the supporting for eDP panel of Firefly
Date: Sun, 7 May 2017 22:46:31 +0800 [thread overview]
Message-ID: <20170507144633.11714-1-ayaka@soulik.info> (raw)
After the IRQ deadlock issue is solved, I can finally offer the supporting
of the eDP panel sold by the T-CHIP Firefly.
I don't think it is necessary to enable two vop for a eDP panel, even
the vop lite is enough for the resolution of this panel.
I have verified those patch with the kmssink from Gstreamer.
but I still got a few warnings message, those message comes from booting time.
[ 10.623207] rockchip-drm display-subsystem: fb0: frame buffer device
[ 10.633680] rockchip-dp ff970000.dp: AUX CH command reply failed!
[ 10.646828] rockchip-dp ff970000.dp: AUX CH command reply failed!
[ 10.647440] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 0
[ 10.663870] rockchip-dp ff970000.dp: Rx Max Link Rate is abnormal :11 !
[ 10.673188] rockchip-dp ff970000.dp: Link Training Clock Recovery success
[ 10.682980] rockchip-dp ff970000.dp: Link Training success!
[ 10.794103] rockchip-dp ff970000.dp: Timeout of video streamclk ok
[ 10.801090] rockchip-dp ff970000.dp: unable to config video
[ 11.330781] EXT4-fs (mmcblk0p7): re-mounted. Opts: data=ordered
You may need the following patch to make PWM backlight work, or merge it
into the bootloader.
ARM: rockchip: rk3288: Switch to use the proper PWM IP
Randy Li (2):
ARM: dts: rockchip: add eDP panel support for Firefly
ARM: dts: rockchip: enable eDP panel at Firefly Release
arch/arm/boot/dts/rk3288-firefly.dts | 28 +++++++++++
arch/arm/boot/dts/rk3288-firefly.dtsi | 92 +++++++++++++++++++++++++++++++++++
2 files changed, 120 insertions(+)
--
2.9.3
WARNING: multiple messages have this Message-ID (diff)
From: Randy Li <ayaka@soulik.info>
To: devicetree@vger.kernel.org
Cc: mark.rutland@arm.com, heiko@sntech.de,
Randy Li <ayaka@soulik.info>,
linux@armlinux.org.uk, linux-kernel@vger.kernel.org,
linux-rockchip@lists.infradead.org, robh+dt@kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 0/2] the supporting for eDP panel of Firefly
Date: Sun, 7 May 2017 22:46:31 +0800 [thread overview]
Message-ID: <20170507144633.11714-1-ayaka@soulik.info> (raw)
After the IRQ deadlock issue is solved, I can finally offer the supporting
of the eDP panel sold by the T-CHIP Firefly.
I don't think it is necessary to enable two vop for a eDP panel, even
the vop lite is enough for the resolution of this panel.
I have verified those patch with the kmssink from Gstreamer.
but I still got a few warnings message, those message comes from booting time.
[ 10.623207] rockchip-drm display-subsystem: fb0: frame buffer device
[ 10.633680] rockchip-dp ff970000.dp: AUX CH command reply failed!
[ 10.646828] rockchip-dp ff970000.dp: AUX CH command reply failed!
[ 10.647440] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 0
[ 10.663870] rockchip-dp ff970000.dp: Rx Max Link Rate is abnormal :11 !
[ 10.673188] rockchip-dp ff970000.dp: Link Training Clock Recovery success
[ 10.682980] rockchip-dp ff970000.dp: Link Training success!
[ 10.794103] rockchip-dp ff970000.dp: Timeout of video streamclk ok
[ 10.801090] rockchip-dp ff970000.dp: unable to config video
[ 11.330781] EXT4-fs (mmcblk0p7): re-mounted. Opts: data=ordered
You may need the following patch to make PWM backlight work, or merge it
into the bootloader.
ARM: rockchip: rk3288: Switch to use the proper PWM IP
Randy Li (2):
ARM: dts: rockchip: add eDP panel support for Firefly
ARM: dts: rockchip: enable eDP panel at Firefly Release
arch/arm/boot/dts/rk3288-firefly.dts | 28 +++++++++++
arch/arm/boot/dts/rk3288-firefly.dtsi | 92 +++++++++++++++++++++++++++++++++++
2 files changed, 120 insertions(+)
--
2.9.3
WARNING: multiple messages have this Message-ID (diff)
From: ayaka@soulik.info (Randy Li)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 0/2] the supporting for eDP panel of Firefly
Date: Sun, 7 May 2017 22:46:31 +0800 [thread overview]
Message-ID: <20170507144633.11714-1-ayaka@soulik.info> (raw)
After the IRQ deadlock issue is solved, I can finally offer the supporting
of the eDP panel sold by the T-CHIP Firefly.
I don't think it is necessary to enable two vop for a eDP panel, even
the vop lite is enough for the resolution of this panel.
I have verified those patch with the kmssink from Gstreamer.
but I still got a few warnings message, those message comes from booting time.
[ 10.623207] rockchip-drm display-subsystem: fb0: frame buffer device
[ 10.633680] rockchip-dp ff970000.dp: AUX CH command reply failed!
[ 10.646828] rockchip-dp ff970000.dp: AUX CH command reply failed!
[ 10.647440] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 0
[ 10.663870] rockchip-dp ff970000.dp: Rx Max Link Rate is abnormal :11 !
[ 10.673188] rockchip-dp ff970000.dp: Link Training Clock Recovery success
[ 10.682980] rockchip-dp ff970000.dp: Link Training success!
[ 10.794103] rockchip-dp ff970000.dp: Timeout of video streamclk ok
[ 10.801090] rockchip-dp ff970000.dp: unable to config video
[ 11.330781] EXT4-fs (mmcblk0p7): re-mounted. Opts: data=ordered
You may need the following patch to make PWM backlight work, or merge it
into the bootloader.
ARM: rockchip: rk3288: Switch to use the proper PWM IP
Randy Li (2):
ARM: dts: rockchip: add eDP panel support for Firefly
ARM: dts: rockchip: enable eDP panel at Firefly Release
arch/arm/boot/dts/rk3288-firefly.dts | 28 +++++++++++
arch/arm/boot/dts/rk3288-firefly.dtsi | 92 +++++++++++++++++++++++++++++++++++
2 files changed, 120 insertions(+)
--
2.9.3
next reply other threads:[~2017-05-07 21:55 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-07 14:46 Randy Li [this message]
2017-05-07 14:46 ` [PATCH 0/2] the supporting for eDP panel of Firefly Randy Li
2017-05-07 14:46 ` Randy Li
2017-05-07 14:46 ` [PATCH 1/2] ARM: dts: rockchip: add eDP panel support for Firefly Randy Li
2017-05-07 14:46 ` Randy Li
2017-05-07 14:46 ` Randy Li
2017-05-07 14:46 ` [PATCH 2/2] ARM: dts: rockchip: enable eDP panel at Firefly Release Randy Li
2017-05-07 14:46 ` Randy Li
2017-05-07 14:46 ` Randy Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170507144633.11714-1-ayaka@soulik.info \
--to=ayaka@soulik.info \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=linux@armlinux.org.uk \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.