From: Rob Herring <robh@kernel.org>
To: Paul Cercueil <paul@crapouillou.net>
Cc: Ralf Baechle <ralf@linux-mips.org>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@codeaurora.org>,
Paul Burton <paul.burton@imgtec.com>,
Maarten ter Huurne <maarten@treewalker.org>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-mips@linux-mips.org, linux-clk@vger.kernel.org
Subject: Re: [PATCH 05/15] serial: 8250_ingenic: Add support for the JZ4770 SoC
Date: Fri, 9 Jun 2017 09:22:43 -0500 [thread overview]
Message-ID: <20170609142243.wbt6gngfl3pmdnzr@rob-hp-laptop> (raw)
In-Reply-To: <20170607200439.24450-6-paul@crapouillou.net>
On Wed, Jun 07, 2017 at 10:04:29PM +0200, Paul Cercueil wrote:
> The JZ4770 SoC's UART is no different from the other JZ SoCs, so this
> commit simply adds the ingenic,jz4770-uart compatible string.
>
> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
> ---
> Documentation/devicetree/bindings/serial/ingenic,uart.txt | 3 ++-
> drivers/tty/serial/8250/8250_ingenic.c | 5 +++++
> 2 files changed, 7 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/serial/ingenic,uart.txt b/Documentation/devicetree/bindings/serial/ingenic,uart.txt
> index 02cb7fe59cb7..75fd8b314af9 100644
> --- a/Documentation/devicetree/bindings/serial/ingenic,uart.txt
> +++ b/Documentation/devicetree/bindings/serial/ingenic,uart.txt
> @@ -2,7 +2,8 @@
>
> Required properties:
> - compatible : "ingenic,jz4740-uart", "ingenic,jz4760-uart",
> - "ingenic,jz4775-uart" or "ingenic,jz4780-uart"
> + "ingenic,jz4770-uart", "ingenic,jz4775-uart" or
> + "ingenic,jz4780-uart"
If you respin, please reformat to 1 per line.
Acked-by: Rob Herring <robh@kernel.org>
WARNING: multiple messages have this Message-ID (diff)
From: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
To: Paul Cercueil <paul-icTtO2rgO2OTuSrc4Mpeew@public.gmane.org>
Cc: Ralf Baechle <ralf-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org>,
Michael Turquette
<mturquette-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>,
Stephen Boyd <sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>,
Paul Burton <paul.burton-1AXoQHu6uovQT0dZR+AlfA@public.gmane.org>,
Maarten ter Huurne
<maarten-Ph2Y2OKCxY1M656bX5wj8A@public.gmane.org>,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-mips-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org,
linux-clk-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCH 05/15] serial: 8250_ingenic: Add support for the JZ4770 SoC
Date: Fri, 9 Jun 2017 09:22:43 -0500 [thread overview]
Message-ID: <20170609142243.wbt6gngfl3pmdnzr@rob-hp-laptop> (raw)
In-Reply-To: <20170607200439.24450-6-paul-icTtO2rgO2OTuSrc4Mpeew@public.gmane.org>
On Wed, Jun 07, 2017 at 10:04:29PM +0200, Paul Cercueil wrote:
> The JZ4770 SoC's UART is no different from the other JZ SoCs, so this
> commit simply adds the ingenic,jz4770-uart compatible string.
>
> Signed-off-by: Paul Cercueil <paul-icTtO2rgO2OTuSrc4Mpeew@public.gmane.org>
> ---
> Documentation/devicetree/bindings/serial/ingenic,uart.txt | 3 ++-
> drivers/tty/serial/8250/8250_ingenic.c | 5 +++++
> 2 files changed, 7 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/serial/ingenic,uart.txt b/Documentation/devicetree/bindings/serial/ingenic,uart.txt
> index 02cb7fe59cb7..75fd8b314af9 100644
> --- a/Documentation/devicetree/bindings/serial/ingenic,uart.txt
> +++ b/Documentation/devicetree/bindings/serial/ingenic,uart.txt
> @@ -2,7 +2,8 @@
>
> Required properties:
> - compatible : "ingenic,jz4740-uart", "ingenic,jz4760-uart",
> - "ingenic,jz4775-uart" or "ingenic,jz4780-uart"
> + "ingenic,jz4770-uart", "ingenic,jz4775-uart" or
> + "ingenic,jz4780-uart"
If you respin, please reformat to 1 per line.
Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2017-06-09 14:22 UTC|newest]
Thread overview: 109+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-07 20:04 [PATCH 00/15] Ingenic JZ4770 and GCW Zero patchset Paul Cercueil
2017-06-07 20:04 ` Paul Cercueil
2017-06-07 20:04 ` [PATCH 01/15] clk: ingenic: Fix recalc_rate for clocks with fixed divider Paul Cercueil
2017-06-20 15:18 ` [PATCH v2 01/17] clk: ingenic: Use const pointer to clk_ops in struct Paul Cercueil
2017-06-20 15:18 ` [PATCH v2 02/17] clk: ingenic: Fix recalc_rate for clocks with fixed divider Paul Cercueil
2017-06-20 15:18 ` [PATCH v2 03/17] clk: ingenic: support PLLs with no bypass bit Paul Cercueil
2017-06-20 15:18 ` [PATCH v2 04/17] clk: ingenic: Add code to enable/disable PLLs Paul Cercueil
2017-06-20 15:18 ` [PATCH v2 05/17] clk: Add Ingenic jz4770 CGU driver Paul Cercueil
2017-06-20 15:18 ` [PATCH v2 06/17] serial: core: Make uart_parse_options take const char* argument Paul Cercueil
2017-06-20 15:18 ` [PATCH v2 07/17] serial: 8250_ingenic: Add support for the JZ4770 SoC Paul Cercueil
2017-06-20 15:18 ` [PATCH v2 08/17] serial: 8250_ingenic: Parse earlycon options Paul Cercueil
2017-06-20 15:18 ` [PATCH v2 09/17] MIPS: Setup boot_command_line before plat_mem_setup Paul Cercueil
2017-06-20 15:18 ` [PATCH v2 10/17] MIPS: ingenic: Use common cmdline handling code Paul Cercueil
2017-06-20 15:18 ` Paul Cercueil
2017-06-20 15:18 ` [PATCH v2 11/17] MIPS: platform: add machtype IDs for more Ingenic SoCs Paul Cercueil
2017-06-20 15:18 ` [PATCH v2 12/17] MIPS: ingenic: Add machine info for supported boards Paul Cercueil
2017-06-20 15:18 ` [PATCH v2 13/17] MIPS: ingenic: Initial JZ4770 support Paul Cercueil
2017-06-20 15:18 ` [PATCH v2 14/17] MIPS: JZ4770: Work around config2 misreporting associativity Paul Cercueil
2017-06-20 15:18 ` [PATCH v2 15/17] MIPS: JZ4770: Workaround for corrupted DMA transfers Paul Cercueil
2017-06-22 7:21 ` Marcin Nowakowski
2017-06-22 7:21 ` Marcin Nowakowski
2017-06-22 7:21 ` Marcin Nowakowski
2017-06-26 13:32 ` Paul Cercueil
2017-06-20 15:18 ` [PATCH v2 16/17] devicetree/bindings: Add GCW vendor prefix Paul Cercueil
2017-06-20 15:18 ` [PATCH v2 17/17] MIPS: ingenic: Initial GCW Zero support Paul Cercueil
2017-06-21 21:50 ` [PATCH v2 01/17] clk: ingenic: Use const pointer to clk_ops in struct Stephen Boyd
2017-06-26 13:34 ` Paul Cercueil
2017-07-02 16:29 ` [PATCH v3 00/18] JZ4770 support Paul Cercueil
2017-07-02 16:29 ` [PATCH v3 01/18] clk: ingenic: Use const pointer to clk_ops in struct Paul Cercueil
2017-07-12 23:20 ` Stephen Boyd
2017-07-13 10:07 ` [PATCH v3 01/18] clk: ingenic: Use const pointer to clk_ops in struct, Paul Cercueil
2017-07-13 10:07 ` Paul Cercueil
2017-07-13 11:49 ` [PATCH v3 01/18] clk: ingenic: Use const pointer to clk_ops in struct Ralf Baechle
2017-07-13 11:49 ` Ralf Baechle
2017-07-13 17:50 ` Stephen Boyd
2017-07-13 17:50 ` Stephen Boyd
2017-12-28 13:56 ` [PATCH v4 00/15] Ingenic JZ4770 and GCW Zero support Paul Cercueil
2017-12-28 13:56 ` [PATCH v4 01/15] clk: ingenic: Use const pointer to clk_ops in struct Paul Cercueil
2017-12-28 13:56 ` Paul Cercueil
2017-12-28 13:56 ` [PATCH v4 02/15] clk: ingenic: Fix recalc_rate for clocks with fixed divider Paul Cercueil
2017-12-28 18:36 ` Stephen Boyd
2017-12-28 13:56 ` [PATCH v4 03/15] clk: ingenic: support PLLs with no bypass bit Paul Cercueil
2017-12-28 18:36 ` Stephen Boyd
2017-12-28 13:56 ` [PATCH v4 04/15] clk: ingenic: Add code to enable/disable PLLs Paul Cercueil
2017-12-28 18:39 ` Stephen Boyd
2017-12-28 13:56 ` [PATCH v4 05/15] dt-bindings: clock: Add jz4770-cgu.h header Paul Cercueil
2017-12-28 18:36 ` Stephen Boyd
2017-12-28 13:56 ` [PATCH v4 06/15] clk: Add Ingenic jz4770 CGU driver Paul Cercueil
2017-12-28 18:38 ` Stephen Boyd
2017-12-29 12:55 ` Philippe Ombredanne
2017-12-29 12:55 ` Philippe Ombredanne
2017-12-29 12:55 ` Philippe Ombredanne
2017-12-29 15:02 ` Paul Cercueil
2017-12-29 15:02 ` Paul Cercueil
2017-12-29 15:02 ` Paul Cercueil
2017-12-28 13:56 ` [PATCH v4 07/15] MIPS: Setup boot_command_line before plat_mem_setup Paul Cercueil
2017-12-28 13:56 ` [PATCH v4 08/15] MIPS: ingenic: Use common cmdline handling code Paul Cercueil
2017-12-28 13:56 ` Paul Cercueil
2017-12-28 13:56 ` [PATCH v4 09/15] MIPS: platform: add machtype IDs for more Ingenic SoCs Paul Cercueil
2017-12-28 13:56 ` [PATCH v4 10/15] MIPS: ingenic: Add machine info for supported boards Paul Cercueil
2017-12-28 13:56 ` [PATCH v4 11/15] MIPS: ingenic: Initial JZ4770 support Paul Cercueil
2017-12-28 13:56 ` [PATCH v4 12/15] MIPS: JZ4770: Work around config2 misreporting associativity Paul Cercueil
2017-12-28 13:56 ` [PATCH v4 13/15] MIPS: JZ4770: Workaround for corrupted DMA transfers Paul Cercueil
2017-12-28 13:56 ` [PATCH v4 14/15] devicetree/bindings: Add GCW vendor prefix Paul Cercueil
2017-12-28 13:56 ` [PATCH v4 15/15] MIPS: ingenic: Initial GCW Zero support Paul Cercueil
2017-12-28 13:56 ` Paul Cercueil
2017-07-02 16:30 ` [PATCH v3 02/18] clk: ingenic: Fix recalc_rate for clocks with fixed divider Paul Cercueil
2017-07-02 16:30 ` [PATCH v3 03/18] clk: ingenic: support PLLs with no bypass bit Paul Cercueil
2017-07-02 16:30 ` [PATCH v3 04/18] clk: ingenic: Add code to enable/disable PLLs Paul Cercueil
2017-07-02 16:30 ` [PATCH v3 05/18] dt-bindings: clock: Add jz4770-cgu.h header Paul Cercueil
2017-07-02 16:30 ` [PATCH v3 06/18] clk: Add Ingenic jz4770 CGU driver Paul Cercueil
2017-07-02 16:30 ` [PATCH v3 07/18] serial: core: Make uart_parse_options take const char* argument Paul Cercueil
2017-07-02 16:30 ` [PATCH v3 08/18] serial: 8250_ingenic: Add support for the JZ4770 SoC Paul Cercueil
2017-07-02 16:30 ` [PATCH v3 09/18] serial: 8250_ingenic: Parse earlycon options Paul Cercueil
2017-07-02 16:30 ` [PATCH v3 10/18] MIPS: Setup boot_command_line before plat_mem_setup Paul Cercueil
2017-07-02 16:30 ` [PATCH v3 11/18] MIPS: ingenic: Use common cmdline handling code Paul Cercueil
2017-07-02 16:30 ` [PATCH v3 12/18] MIPS: platform: add machtype IDs for more Ingenic SoCs Paul Cercueil
2017-07-02 16:30 ` [PATCH v3 13/18] MIPS: ingenic: Add machine info for supported boards Paul Cercueil
2017-07-02 16:30 ` [PATCH v3 14/18] MIPS: ingenic: Initial JZ4770 support Paul Cercueil
2017-07-02 16:30 ` [PATCH v3 15/18] MIPS: JZ4770: Work around config2 misreporting associativity Paul Cercueil
2017-07-02 16:30 ` [PATCH v3 16/18] MIPS: JZ4770: Workaround for corrupted DMA transfers Paul Cercueil
2017-07-02 16:30 ` [PATCH v3 17/18] devicetree/bindings: Add GCW vendor prefix Paul Cercueil
2017-07-02 16:30 ` [PATCH v3 18/18] MIPS: ingenic: Initial GCW Zero support Paul Cercueil
2017-06-07 20:04 ` [PATCH 02/15] clk: ingenic: support PLLs with no bypass bit Paul Cercueil
2017-06-07 20:04 ` [PATCH 03/15] clk: ingenic: Add code to enable/disable PLLs Paul Cercueil
2017-06-07 20:04 ` [PATCH 04/15] clk: Add Ingenic jz4770 CGU driver Paul Cercueil
2017-06-07 20:59 ` Stephen Boyd
2017-06-07 20:59 ` Stephen Boyd
2017-06-08 8:40 ` Maarten ter Huurne
2017-06-08 21:10 ` Paul Cercueil
2017-06-26 13:50 ` Paul Cercueil
2017-06-26 22:49 ` Stephen Boyd
2017-06-07 20:04 ` [PATCH 05/15] serial: 8250_ingenic: Add support for the JZ4770 SoC Paul Cercueil
2017-06-09 14:22 ` Rob Herring [this message]
2017-06-09 14:22 ` Rob Herring
2017-06-07 20:04 ` [PATCH 06/15] serial: 8250_ingenic: Parse earlycon options Paul Cercueil
2017-06-08 7:31 ` Marcin Nowakowski
2017-06-08 7:31 ` Marcin Nowakowski
2017-06-08 21:12 ` Paul Cercueil
2017-06-07 20:04 ` [PATCH 07/15] MIPS: Setup boot_command_line before plat_mem_setup Paul Cercueil
2017-06-07 20:04 ` [PATCH 08/15] MIPS: ingenic: Use common cmdline handling code Paul Cercueil
2017-06-07 20:04 ` [PATCH 09/15] MIPS: platform: add machtype IDs for more Ingenic SoCs Paul Cercueil
2017-06-07 20:04 ` [PATCH 10/15] MIPS: ingenic: Add machine info for supported boards Paul Cercueil
2017-06-07 20:04 ` [PATCH 11/15] MIPS: ingenic: Initial JZ4770 support Paul Cercueil
2017-06-07 20:04 ` [PATCH 12/15] MIPS: JZ4770: Work around config2 misreporting associativity Paul Cercueil
2017-06-07 20:04 ` [PATCH 13/15] MIPS: JZ4770: Workaround for corrupted DMA transfers Paul Cercueil
2017-06-07 20:04 ` [PATCH 14/15] devicetree/bindings: Add GCW vendor prefix Paul Cercueil
2017-06-09 14:24 ` Rob Herring
2017-06-07 20:04 ` [PATCH 15/15] MIPS: ingenic: Initial GCW Zero support Paul Cercueil
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170609142243.wbt6gngfl3pmdnzr@rob-hp-laptop \
--to=robh@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@linux-mips.org \
--cc=maarten@treewalker.org \
--cc=mturquette@baylibre.com \
--cc=paul.burton@imgtec.com \
--cc=paul@crapouillou.net \
--cc=ralf@linux-mips.org \
--cc=sboyd@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.