From: Eric Anholt <eric@anholt.net> To: dri-devel@lists.freedesktop.org, Archit Taneja <architt@codeaurora.org>, Andrzej Hajda <a.hajda@samsung.com>, Laurent Pinchart <Laurent.pinchart@ideasonboard.com>, Thierry Reding <thierry.reding@gmail.com> Cc: linux-kernel@vger.kernel.org, Eric Anholt <eric@anholt.net> Subject: [PATCH 7/8] dt-bindings: Document the Raspberry Pi Touchscreen nodes. Date: Tue, 27 Jun 2017 12:58:38 -0700 [thread overview] Message-ID: <20170627195839.3338-8-eric@anholt.net> (raw) In-Reply-To: <20170627195839.3338-1-eric@anholt.net> This doesn't yet cover input, but the driver does get the display working when the firmware is disabled from talking to our I2C lines. Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Rob Herring <robh@kernel.org> --- .../panel/raspberrypi,7inch-touchscreen.txt | 49 ++++++++++++++++++++++ 1 file changed, 49 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/raspberrypi,7inch-touchscreen.txt diff --git a/Documentation/devicetree/bindings/display/panel/raspberrypi,7inch-touchscreen.txt b/Documentation/devicetree/bindings/display/panel/raspberrypi,7inch-touchscreen.txt new file mode 100644 index 000000000000..e9e19c059260 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/raspberrypi,7inch-touchscreen.txt @@ -0,0 +1,49 @@ +This binding covers the official 7" (800x480) Raspberry Pi touchscreen +panel. + +This DSI panel contains: + +- TC358762 DSI->DPI bridge +- Atmel microcontroller on I2C for power sequencing the DSI bridge and + controlling backlight +- Touchscreen controller on I2C for touch input + +and this binding covers the DSI display parts but not its touch input. + +Required properties: +- compatible: Must be "raspberrypi,7inch-touchscreen-panel" +- reg: Must be "45" +- port: See panel-common.txt + +Example: + +dsi1: dsi@7e700000 { + #address-cells = <1>; + #size-cells = <0>; + <...> + + port { + dsi_out_port: endpoint { + remote-endpoint = <&panel_dsi_port>; + }; + }; +}; + +i2c_dsi: i2c { + compatible = "i2c-gpio"; + #address-cells = <1>; + #size-cells = <0>; + gpios = <&gpio 28 0 + &gpio 29 0>; + + lcd@45 { + compatible = "raspberrypi,7inch-touchscreen-panel"; + reg = <0x45>; + + port { + panel_dsi_port: endpoint { + remote-endpoint = <&dsi_out_port>; + }; + }; + }; +}; -- 2.11.0
WARNING: multiple messages have this Message-ID (diff)
From: Eric Anholt <eric@anholt.net> To: dri-devel@lists.freedesktop.org, Archit Taneja <architt@codeaurora.org>, Andrzej Hajda <a.hajda@samsung.com>, Laurent Pinchart <Laurent.pinchart@ideasonboard.com>, Thierry Reding <thierry.reding@gmail.com> Cc: linux-kernel@vger.kernel.org Subject: [PATCH 7/8] dt-bindings: Document the Raspberry Pi Touchscreen nodes. Date: Tue, 27 Jun 2017 12:58:38 -0700 [thread overview] Message-ID: <20170627195839.3338-8-eric@anholt.net> (raw) In-Reply-To: <20170627195839.3338-1-eric@anholt.net> This doesn't yet cover input, but the driver does get the display working when the firmware is disabled from talking to our I2C lines. Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Rob Herring <robh@kernel.org> --- .../panel/raspberrypi,7inch-touchscreen.txt | 49 ++++++++++++++++++++++ 1 file changed, 49 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/raspberrypi,7inch-touchscreen.txt diff --git a/Documentation/devicetree/bindings/display/panel/raspberrypi,7inch-touchscreen.txt b/Documentation/devicetree/bindings/display/panel/raspberrypi,7inch-touchscreen.txt new file mode 100644 index 000000000000..e9e19c059260 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/raspberrypi,7inch-touchscreen.txt @@ -0,0 +1,49 @@ +This binding covers the official 7" (800x480) Raspberry Pi touchscreen +panel. + +This DSI panel contains: + +- TC358762 DSI->DPI bridge +- Atmel microcontroller on I2C for power sequencing the DSI bridge and + controlling backlight +- Touchscreen controller on I2C for touch input + +and this binding covers the DSI display parts but not its touch input. + +Required properties: +- compatible: Must be "raspberrypi,7inch-touchscreen-panel" +- reg: Must be "45" +- port: See panel-common.txt + +Example: + +dsi1: dsi@7e700000 { + #address-cells = <1>; + #size-cells = <0>; + <...> + + port { + dsi_out_port: endpoint { + remote-endpoint = <&panel_dsi_port>; + }; + }; +}; + +i2c_dsi: i2c { + compatible = "i2c-gpio"; + #address-cells = <1>; + #size-cells = <0>; + gpios = <&gpio 28 0 + &gpio 29 0>; + + lcd@45 { + compatible = "raspberrypi,7inch-touchscreen-panel"; + reg = <0x45>; + + port { + panel_dsi_port: endpoint { + remote-endpoint = <&dsi_out_port>; + }; + }; + }; +}; -- 2.11.0 _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2017-06-27 19:59 UTC|newest] Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top 2017-06-27 19:58 [PATCH 0/8] RPi touchscreen panel driver v4 Eric Anholt 2017-06-27 19:58 ` Eric Anholt 2017-06-27 19:58 ` [PATCH 1/8] drm/vc4: Fix DSI T_INIT timing Eric Anholt 2017-06-27 19:58 ` Eric Anholt 2017-06-29 9:02 ` Andrzej Hajda 2017-06-29 9:02 ` Andrzej Hajda 2017-06-27 19:58 ` [PATCH 2/8] drm/vc4: Fix misleading name of the continuous flag Eric Anholt 2017-06-27 19:58 ` Eric Anholt 2017-06-29 9:03 ` Andrzej Hajda 2017-06-29 9:03 ` Andrzej Hajda 2017-06-27 19:58 ` [PATCH 3/8] drm/vc4: Use drm_mode_vrefresh() in DSI fixup, in case vrefresh is 0 Eric Anholt 2017-06-27 19:58 ` Eric Anholt 2017-06-29 9:24 ` Andrzej Hajda 2017-06-29 9:24 ` Andrzej Hajda 2017-06-27 19:58 ` [PATCH 4/8] drm/bridge: Add a devm_ allocator for panel bridge Eric Anholt 2017-06-27 19:58 ` Eric Anholt 2017-06-29 9:30 ` Andrzej Hajda 2017-06-29 9:30 ` Andrzej Hajda 2017-06-27 19:58 ` [PATCH 5/8] drm/vc4: Delay DSI host registration until the panel has probed Eric Anholt 2017-06-27 19:58 ` Eric Anholt 2017-06-29 9:42 ` Andrzej Hajda 2017-06-29 9:42 ` Andrzej Hajda 2017-06-27 19:58 ` [PATCH 6/8] drm: Allow DSI devices to be registered before the host registers Eric Anholt 2017-06-27 19:58 ` Eric Anholt 2017-06-29 5:03 ` Archit Taneja 2017-06-29 5:03 ` Archit Taneja 2017-06-29 10:39 ` Andrzej Hajda 2017-06-29 10:39 ` Andrzej Hajda 2017-06-29 15:22 ` Eric Anholt 2017-06-29 15:22 ` Eric Anholt 2017-06-30 8:48 ` Andrzej Hajda 2017-06-30 8:48 ` Andrzej Hajda 2017-07-03 10:56 ` Archit Taneja 2017-07-03 10:56 ` Archit Taneja 2017-07-14 23:01 ` Eric Anholt 2017-07-14 23:01 ` Eric Anholt 2017-07-17 13:39 ` Archit Taneja 2017-07-17 13:39 ` Archit Taneja 2017-07-14 22:58 ` Eric Anholt 2017-07-14 22:58 ` Eric Anholt 2017-07-17 4:26 ` Archit Taneja 2017-07-17 4:26 ` Archit Taneja 2017-07-18 20:13 ` Eric Anholt 2017-07-18 20:13 ` Eric Anholt 2017-07-19 3:29 ` Archit Taneja 2017-07-19 3:29 ` Archit Taneja 2017-08-04 9:29 ` Boris Brezillon 2017-08-04 9:29 ` Boris Brezillon 2017-06-27 19:58 ` Eric Anholt [this message] 2017-06-27 19:58 ` [PATCH 7/8] dt-bindings: Document the Raspberry Pi Touchscreen nodes Eric Anholt 2017-06-27 19:58 ` [PATCH 8/8] drm/panel: Add support for the Raspberry Pi 7" Touchscreen Eric Anholt 2017-06-27 19:58 ` Eric Anholt
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20170627195839.3338-8-eric@anholt.net \ --to=eric@anholt.net \ --cc=Laurent.pinchart@ideasonboard.com \ --cc=a.hajda@samsung.com \ --cc=architt@codeaurora.org \ --cc=dri-devel@lists.freedesktop.org \ --cc=linux-kernel@vger.kernel.org \ --cc=thierry.reding@gmail.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.