From: Andrew Lunn <andrew@lunn.ch>
To: linux-kernel-dev@beckhoff.com
Cc: robh+dt@kernel.org, mark.rutland@arm.com,
devicetree@vger.kernel.org,
"Patrick Brünn" <p.bruenn@beckhoff.com>,
linux@armlinux.org.uk, linux-kernel@vger.kernel.org,
kernel@pengutronix.de, fabio.estevam@nxp.com,
shawnguo@kernel.org, linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH] ARM: dts: imx: add CX9020 Embedded PC device tree
Date: Wed, 12 Jul 2017 16:42:39 +0200 [thread overview]
Message-ID: <20170712144239.GC2557@lunn.ch> (raw)
In-Reply-To: <20170712090408.12212-1-linux-kernel-dev@beckhoff.com>
On Wed, Jul 12, 2017 at 11:04:08AM +0200, linux-kernel-dev@beckhoff.com wrote:
> From: Patrick Brünn <p.bruenn@beckhoff.com>
>
> The CX9020 differs from i.MX53 Quick Start Board by:
> - use uart2 instead of uart1
> - DVI-D connector instead of VGA
> - no audio
> - CCAT FPGA connected to emi
> - enable rtc
>
> Signed-off-by: Patrick Brünn <p.bruenn@beckhoff.com>
> ---
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/imx53-cx9020.dts | 377 +++++++++++++++++++++++++++++++++++++
> 2 files changed, 378 insertions(+)
> create mode 100644 arch/arm/boot/dts/imx53-cx9020.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 9c5e1d944d1c..ea60698f9783 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -340,6 +340,7 @@ dtb-$(CONFIG_SOC_IMX53) += \
> imx53-ard.dtb \
> imx53-m53evk.dtb \
> imx53-mba53.dtb \
> + imx53-cx9020.dtb \
> imx53-qsb.dtb \
> imx53-qsrb.dtb \
> imx53-smd.dtb \
Hi Patrick
It appears this list is in alphabetic order...
Andrew
WARNING: multiple messages have this Message-ID (diff)
From: Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
To: linux-kernel-dev-QonKdJ6Bx35Wk0Htik3J/w@public.gmane.org
Cc: robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
"Patrick Brünn"
<p.bruenn-QonKdJ6Bx35Wk0Htik3J/w@public.gmane.org>,
linux-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org,
fabio.estevam-3arQi8VN3Tc@public.gmane.org,
shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: Re: [PATCH] ARM: dts: imx: add CX9020 Embedded PC device tree
Date: Wed, 12 Jul 2017 16:42:39 +0200 [thread overview]
Message-ID: <20170712144239.GC2557@lunn.ch> (raw)
In-Reply-To: <20170712090408.12212-1-linux-kernel-dev-QonKdJ6Bx35Wk0Htik3J/w@public.gmane.org>
On Wed, Jul 12, 2017 at 11:04:08AM +0200, linux-kernel-dev-QonKdJ6Bx35Wk0Htik3J/w@public.gmane.org wrote:
> From: Patrick Brünn <p.bruenn-QonKdJ6Bx35Wk0Htik3J/w@public.gmane.org>
>
> The CX9020 differs from i.MX53 Quick Start Board by:
> - use uart2 instead of uart1
> - DVI-D connector instead of VGA
> - no audio
> - CCAT FPGA connected to emi
> - enable rtc
>
> Signed-off-by: Patrick Brünn <p.bruenn-QonKdJ6Bx35Wk0Htik3J/w@public.gmane.org>
> ---
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/imx53-cx9020.dts | 377 +++++++++++++++++++++++++++++++++++++
> 2 files changed, 378 insertions(+)
> create mode 100644 arch/arm/boot/dts/imx53-cx9020.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 9c5e1d944d1c..ea60698f9783 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -340,6 +340,7 @@ dtb-$(CONFIG_SOC_IMX53) += \
> imx53-ard.dtb \
> imx53-m53evk.dtb \
> imx53-mba53.dtb \
> + imx53-cx9020.dtb \
> imx53-qsb.dtb \
> imx53-qsrb.dtb \
> imx53-smd.dtb \
Hi Patrick
It appears this list is in alphabetic order...
Andrew
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: andrew@lunn.ch (Andrew Lunn)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: dts: imx: add CX9020 Embedded PC device tree
Date: Wed, 12 Jul 2017 16:42:39 +0200 [thread overview]
Message-ID: <20170712144239.GC2557@lunn.ch> (raw)
In-Reply-To: <20170712090408.12212-1-linux-kernel-dev@beckhoff.com>
On Wed, Jul 12, 2017 at 11:04:08AM +0200, linux-kernel-dev at beckhoff.com wrote:
> From: Patrick Br?nn <p.bruenn@beckhoff.com>
>
> The CX9020 differs from i.MX53 Quick Start Board by:
> - use uart2 instead of uart1
> - DVI-D connector instead of VGA
> - no audio
> - CCAT FPGA connected to emi
> - enable rtc
>
> Signed-off-by: Patrick Br?nn <p.bruenn@beckhoff.com>
> ---
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/imx53-cx9020.dts | 377 +++++++++++++++++++++++++++++++++++++
> 2 files changed, 378 insertions(+)
> create mode 100644 arch/arm/boot/dts/imx53-cx9020.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 9c5e1d944d1c..ea60698f9783 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -340,6 +340,7 @@ dtb-$(CONFIG_SOC_IMX53) += \
> imx53-ard.dtb \
> imx53-m53evk.dtb \
> imx53-mba53.dtb \
> + imx53-cx9020.dtb \
> imx53-qsb.dtb \
> imx53-qsrb.dtb \
> imx53-smd.dtb \
Hi Patrick
It appears this list is in alphabetic order...
Andrew
next prev parent reply other threads:[~2017-07-12 14:42 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-12 9:04 [PATCH] ARM: dts: imx: add CX9020 Embedded PC device tree linux-kernel-dev
2017-07-12 9:04 ` linux-kernel-dev at beckhoff.com
2017-07-12 9:04 ` linux-kernel-dev
2017-07-12 9:46 ` Mark Rutland
2017-07-12 9:46 ` Mark Rutland
2017-07-12 9:46 ` Mark Rutland
2017-07-12 11:46 ` Patrick Brünn
2017-07-12 11:46 ` Patrick Brünn
2017-07-12 11:46 ` Patrick Brünn
2017-07-12 14:42 ` Andrew Lunn [this message]
2017-07-12 14:42 ` Andrew Lunn
2017-07-12 14:42 ` Andrew Lunn
2017-07-13 3:00 ` Patrick Brünn
2017-07-13 3:00 ` Patrick Brünn
2017-07-13 3:00 ` Patrick Brünn
2017-07-13 11:04 ` [PATCH v2 0/2] Add CX9020 " linux-kernel-dev
2017-07-13 11:04 ` linux-kernel-dev at beckhoff.com
2017-07-13 11:04 ` linux-kernel-dev
2017-07-13 11:04 ` [PATCH v2 1/2] ARM: dts: imx: add CX9020 Embedded PC " linux-kernel-dev
2017-07-13 11:04 ` linux-kernel-dev at beckhoff.com
2017-07-13 11:04 ` linux-kernel-dev
2017-07-13 11:04 ` [PATCH v2 2/2] drm/panel: simple: Add support for ddc-only panel linux-kernel-dev
2017-07-14 14:15 ` Rob Herring
2017-07-14 14:15 ` Rob Herring
2017-07-13 11:13 ` [PATCH v3 0/2] Add CX9020 device tree linux-kernel-dev
2017-07-13 11:13 ` linux-kernel-dev at beckhoff.com
2017-07-13 11:13 ` linux-kernel-dev-QonKdJ6Bx35Wk0Htik3J/w
2017-07-13 11:13 ` [PATCH v3 1/2] ARM: dts: imx: add CX9020 Embedded PC " linux-kernel-dev
2017-07-13 11:13 ` linux-kernel-dev at beckhoff.com
2017-07-13 11:13 ` linux-kernel-dev
2017-07-14 2:16 ` Shawn Guo
2017-07-14 2:16 ` Shawn Guo
2017-07-14 2:16 ` Shawn Guo
2017-07-13 11:13 ` [PATCH v3 2/2] drm/panel: simple: Add support for ddc-only panel linux-kernel-dev
[not found] ` <20170712090408.12212-1-linux-kernel-dev-QonKdJ6Bx35Wk0Htik3J/w@public.gmane.org>
2017-07-21 4:06 ` [PATCH v4 0/2] ARM: dts: imx: add CX9020 Embedded PC device tree linux-kernel-dev-QonKdJ6Bx35Wk0Htik3J/w
2017-07-21 4:06 ` linux-kernel-dev at beckhoff.com
2017-07-21 4:06 ` [PATCH v4 1/2] dt-bindings: arm: Add entry for Beckhoff CX9020 linux-kernel-dev
2017-07-21 4:06 ` linux-kernel-dev-QonKdJ6Bx35Wk0Htik3J/w
2017-07-24 20:28 ` Rob Herring
2017-07-24 20:28 ` Rob Herring
2017-07-21 4:06 ` [PATCH v4 2/2] ARM: dts: imx: add CX9020 Embedded PC device tree linux-kernel-dev
2017-07-21 4:06 ` linux-kernel-dev at beckhoff.com
2017-07-21 4:06 ` linux-kernel-dev-QonKdJ6Bx35Wk0Htik3J/w
2017-07-25 7:59 ` Shawn Guo
2017-07-25 7:59 ` Shawn Guo
2017-07-25 7:59 ` Shawn Guo
2017-07-25 11:41 ` Patrick Brünn
2017-07-25 11:41 ` Patrick Brünn
2017-07-25 11:41 ` Patrick Brünn
2017-07-25 13:17 ` Shawn Guo
2017-07-25 13:17 ` Shawn Guo
2017-07-25 13:17 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170712144239.GC2557@lunn.ch \
--to=andrew@lunn.ch \
--cc=devicetree@vger.kernel.org \
--cc=fabio.estevam@nxp.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel-dev@beckhoff.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=mark.rutland@arm.com \
--cc=p.bruenn@beckhoff.com \
--cc=robh+dt@kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.