All of lore.kernel.org
 help / color / mirror / Atom feed
From: Charles Keepax <ckeepax@opensource.cirrus.com>
To: <broonie@kernel.org>, <lee.jones@linaro.org>
Cc: <lgirdwood@gmail.com>, <robh+dt@kernel.org>,
	<mark.rutland@arm.com>, <devicetree@vger.kernel.org>,
	<alsa-devel@alsa-project.org>, <linux-kernel@vger.kernel.org>,
	<patches@opensource.cirrus.com>
Subject: [PATCH 3/7] ASoC: arizona: Add audio device tree bindings
Date: Mon, 4 Sep 2017 16:41:50 +0100	[thread overview]
Message-ID: <20170904154154.4395-4-ckeepax@opensource.cirrus.com> (raw)
In-Reply-To: <20170904154154.4395-1-ckeepax@opensource.cirrus.com>

In keeping with the style of the rest of this drivers device tree
bindings split the audio device tree bindings into their own document.
It should be noted this patch makes no change to the binding itself
just moves the documentation into a specific file for the audio
binding. For easy of merging a separate patch removes the current
documentation from the MFD binding documentation.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
---
 .../devicetree/bindings/sound/wlf,arizona.txt      | 49 ++++++++++++++++++++++
 MAINTAINERS                                        |  1 +
 2 files changed, 50 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/sound/wlf,arizona.txt

diff --git a/Documentation/devicetree/bindings/sound/wlf,arizona.txt b/Documentation/devicetree/bindings/sound/wlf,arizona.txt
new file mode 100644
index 000000000000..4e67224488d8
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/wlf,arizona.txt
@@ -0,0 +1,49 @@
+Cirrus Logic Arizona class audio SoCs
+
+These devices are audio SoCs with extensive digital capabilities and a range
+of analogue I/O.
+
+This document lists sound specific bindings, see the primary binding
+document:
+  ../mfd/arizona.txt
+
+Optional properties:
+
+  - wlf,inmode : A list of INn_MODE register values, where n is the number
+    of input signals. Valid values are 0 (Differential), 1 (Single-ended) and
+    2 (Digital Microphone). If absent, INn_MODE registers set to 0 by default.
+    If present, values must be specified less than or equal to the number of
+    input signals. If values less than the number of input signals, elements
+    that have not been specified are set to 0 by default. Entries are:
+    <IN1, IN2, IN3, IN4> (wm5102, wm5110, wm8280, wm8997)
+    <IN1A, IN2A, IN1B, IN2B> (wm8998, wm1814)
+  - wlf,out-mono : A list of boolean values indicating whether each output is
+    mono or stereo. Position within the list indicates the output affected
+    (eg. First entry in the list corresponds to output 1). A non-zero value
+    indicates a mono output. If present, the number of values should be less
+    than or equal to the number of outputs, if less values are supplied the
+    additional outputs will be treated as stereo.
+
+  - wlf,dmic-ref : DMIC reference voltage source for each input, can be
+    selected from either MICVDD or one of the MICBIAS's, defines
+    (ARIZONA_DMIC_xxxx) are provided in <dt-bindings/mfd/arizona.txt>. If
+    present, the number of values should be less than or equal to the
+    number of inputs, unspecified inputs will use the chip default.
+
+  - wlf,max-channels-clocked : The maximum number of channels to be clocked on
+    each AIF, useful for I2S systems with multiple data lines being mastered.
+    Specify one cell for each AIF to be configured, specify zero for AIFs that
+    should be handled normally.
+    If present, number of cells must be less than or equal to the number of
+    AIFs. If less than the number of AIFs, for cells that have not been
+    specified the corresponding AIFs will be treated as default setting.
+
+  - wlf,spk-fmt : PDM speaker data format, must contain 2 cells (OUT5 and OUT6).
+    See the datasheet for values.
+    The second cell is ignored for codecs that do not have OUT6 (wm5102, wm8997,
+      wm8998, wm1814)
+
+  - wlf,spk-mute : PDM speaker mute setting, must contain 2 cells (OUT5 and OUT6).
+    See the datasheet for values.
+    The second cell is ignored for codecs that do not have OUT6 (wm5102, wm8997,
+    wm8998, wm1814)
diff --git a/MAINTAINERS b/MAINTAINERS
index 1c3feffb1c1c..9018b9584b1b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -14288,6 +14288,7 @@ F:	Documentation/devicetree/bindings/extcon/extcon-arizona.txt
 F:	Documentation/devicetree/bindings/regulator/arizona-regulator.txt
 F:	Documentation/devicetree/bindings/mfd/arizona.txt
 F:	Documentation/devicetree/bindings/mfd/wm831x.txt
+F:	Documentation/devicetree/bindings/sound/wlf,arizona.txt
 F:	arch/arm/mach-s3c64xx/mach-crag6410*
 F:	drivers/clk/clk-wm83*.c
 F:	drivers/extcon/extcon-arizona.c
-- 
2.11.0

WARNING: multiple messages have this Message-ID (diff)
From: Charles Keepax <ckeepax@opensource.cirrus.com>
To: broonie@kernel.org, lee.jones@linaro.org
Cc: lgirdwood@gmail.com, robh+dt@kernel.org, mark.rutland@arm.com,
	devicetree@vger.kernel.org, alsa-devel@alsa-project.org,
	linux-kernel@vger.kernel.org, patches@opensource.cirrus.com
Subject: [PATCH 3/7] ASoC: arizona: Add audio device tree bindings
Date: Mon, 4 Sep 2017 16:41:50 +0100	[thread overview]
Message-ID: <20170904154154.4395-4-ckeepax@opensource.cirrus.com> (raw)
In-Reply-To: <20170904154154.4395-1-ckeepax@opensource.cirrus.com>

In keeping with the style of the rest of this drivers device tree
bindings split the audio device tree bindings into their own document.
It should be noted this patch makes no change to the binding itself
just moves the documentation into a specific file for the audio
binding. For easy of merging a separate patch removes the current
documentation from the MFD binding documentation.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
---
 .../devicetree/bindings/sound/wlf,arizona.txt      | 49 ++++++++++++++++++++++
 MAINTAINERS                                        |  1 +
 2 files changed, 50 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/sound/wlf,arizona.txt

diff --git a/Documentation/devicetree/bindings/sound/wlf,arizona.txt b/Documentation/devicetree/bindings/sound/wlf,arizona.txt
new file mode 100644
index 000000000000..4e67224488d8
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/wlf,arizona.txt
@@ -0,0 +1,49 @@
+Cirrus Logic Arizona class audio SoCs
+
+These devices are audio SoCs with extensive digital capabilities and a range
+of analogue I/O.
+
+This document lists sound specific bindings, see the primary binding
+document:
+  ../mfd/arizona.txt
+
+Optional properties:
+
+  - wlf,inmode : A list of INn_MODE register values, where n is the number
+    of input signals. Valid values are 0 (Differential), 1 (Single-ended) and
+    2 (Digital Microphone). If absent, INn_MODE registers set to 0 by default.
+    If present, values must be specified less than or equal to the number of
+    input signals. If values less than the number of input signals, elements
+    that have not been specified are set to 0 by default. Entries are:
+    <IN1, IN2, IN3, IN4> (wm5102, wm5110, wm8280, wm8997)
+    <IN1A, IN2A, IN1B, IN2B> (wm8998, wm1814)
+  - wlf,out-mono : A list of boolean values indicating whether each output is
+    mono or stereo. Position within the list indicates the output affected
+    (eg. First entry in the list corresponds to output 1). A non-zero value
+    indicates a mono output. If present, the number of values should be less
+    than or equal to the number of outputs, if less values are supplied the
+    additional outputs will be treated as stereo.
+
+  - wlf,dmic-ref : DMIC reference voltage source for each input, can be
+    selected from either MICVDD or one of the MICBIAS's, defines
+    (ARIZONA_DMIC_xxxx) are provided in <dt-bindings/mfd/arizona.txt>. If
+    present, the number of values should be less than or equal to the
+    number of inputs, unspecified inputs will use the chip default.
+
+  - wlf,max-channels-clocked : The maximum number of channels to be clocked on
+    each AIF, useful for I2S systems with multiple data lines being mastered.
+    Specify one cell for each AIF to be configured, specify zero for AIFs that
+    should be handled normally.
+    If present, number of cells must be less than or equal to the number of
+    AIFs. If less than the number of AIFs, for cells that have not been
+    specified the corresponding AIFs will be treated as default setting.
+
+  - wlf,spk-fmt : PDM speaker data format, must contain 2 cells (OUT5 and OUT6).
+    See the datasheet for values.
+    The second cell is ignored for codecs that do not have OUT6 (wm5102, wm8997,
+      wm8998, wm1814)
+
+  - wlf,spk-mute : PDM speaker mute setting, must contain 2 cells (OUT5 and OUT6).
+    See the datasheet for values.
+    The second cell is ignored for codecs that do not have OUT6 (wm5102, wm8997,
+    wm8998, wm1814)
diff --git a/MAINTAINERS b/MAINTAINERS
index 1c3feffb1c1c..9018b9584b1b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -14288,6 +14288,7 @@ F:	Documentation/devicetree/bindings/extcon/extcon-arizona.txt
 F:	Documentation/devicetree/bindings/regulator/arizona-regulator.txt
 F:	Documentation/devicetree/bindings/mfd/arizona.txt
 F:	Documentation/devicetree/bindings/mfd/wm831x.txt
+F:	Documentation/devicetree/bindings/sound/wlf,arizona.txt
 F:	arch/arm/mach-s3c64xx/mach-crag6410*
 F:	drivers/clk/clk-wm83*.c
 F:	drivers/extcon/extcon-arizona.c
-- 
2.11.0

  parent reply	other threads:[~2017-09-04 15:43 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-09-04 15:41 [PATCH 0/7] Refactor audio device tree handling Charles Keepax
2017-09-04 15:41 ` Charles Keepax
2017-09-04 15:41 ` [PATCH 1/7] ASoC: arizona: Add new common Arizona init function Charles Keepax
2017-09-04 15:41   ` Charles Keepax
2017-09-19 15:00   ` Applied "ASoC: arizona: Add new common Arizona init function" to the asoc tree Mark Brown
2017-09-19 15:00     ` Mark Brown
2017-09-04 15:41 ` [PATCH 2/7] ASoC: arizona: Add handling for audio related device tree entries Charles Keepax
2017-09-04 15:41   ` Charles Keepax
2017-09-19 15:00   ` Applied "ASoC: arizona: Add handling for audio related device tree entries" to the asoc tree Mark Brown
2017-09-19 15:00     ` Mark Brown
2017-09-04 15:41 ` Charles Keepax [this message]
2017-09-04 15:41   ` [PATCH 3/7] ASoC: arizona: Add audio device tree bindings Charles Keepax
2017-09-12 21:14   ` Rob Herring
2017-09-19 14:59   ` Applied "ASoC: arizona: Add audio device tree bindings" to the asoc tree Mark Brown
2017-09-19 14:59     ` Mark Brown
2017-09-04 15:41 ` [PATCH 4/7] mfd: arizona: Remove audio related device tree code Charles Keepax
2017-09-04 15:41   ` Charles Keepax
2017-09-05  7:23   ` Lee Jones
2017-09-20 17:14   ` Applied "mfd: arizona: Remove audio related device tree code" to the asoc tree Mark Brown
2017-09-20 17:14     ` Mark Brown
2017-09-04 15:41 ` [PATCH 5/7] mfd: arizona: Remove audio bindings from MFD binding document Charles Keepax
2017-09-04 15:41   ` Charles Keepax
2017-09-05  7:22   ` Lee Jones
2017-09-12 21:15   ` Rob Herring
2017-09-20 17:14   ` Applied "mfd: arizona: Remove audio bindings from MFD binding document" to the asoc tree Mark Brown
2017-09-20 17:14     ` Mark Brown
2017-09-04 15:41 ` [PATCH 6/7] ASoC: arizona: Add support for setting the output volume limits Charles Keepax
2017-09-04 15:41   ` Charles Keepax
2017-09-05  7:22   ` Lee Jones
2017-09-20 17:14   ` Applied "ASoC: arizona: Add support for setting the output volume limits" to the asoc tree Mark Brown
2017-09-20 17:14     ` Mark Brown
2017-09-04 15:41 ` [PATCH 7/7] ASoC: arizona: Add device tree binding doc for volume limits Charles Keepax
2017-09-04 15:41   ` Charles Keepax
2017-09-12 21:21   ` Rob Herring
2017-09-12 21:21     ` Rob Herring
2017-09-20 17:13   ` Applied "ASoC: arizona: Add device tree binding doc for volume limits" to the asoc tree Mark Brown
2017-09-20 17:13     ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170904154154.4395-4-ckeepax@opensource.cirrus.com \
    --to=ckeepax@opensource.cirrus.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=lee.jones@linaro.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=patches@opensource.cirrus.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.