[PATCH 06/10] ARM: dts: Add Broadcom Hurricane 2 DTS include file

From: Florian Fainelli <f.fainelli@gmail.com>
To: linux-arm-kernel@lists.infradead.org
Cc: Florian Fainelli <f.fainelli@gmail.com>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>, Ray Jui <rjui@broadcom.com>,
	Scott Branden <sbranden@broadcom.com>,
	Jon Mason <jonmason@broadcom.com>,
	bcm-kernel-feedback-list@broadcom.com (maintainer:BROADCOM IPROC
	ARM ARCHITECTURE), Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@codeaurora.org>,
	Russell King <linux@armlinux.org.uk>,
	Arnd Bergmann <arnd@arndb.de>, Olof Johansson <olof@lixom.net>,
	devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND
	FLATTENED DEVICE TREE BINDINGS),
	linux-kernel@vger.kernel.org (open list),
	linux-clk@vger.kernel.org (open list:COMMON CLK FRAMEWORK)
Subject: [PATCH 06/10] ARM: dts: Add Broadcom Hurricane 2 DTS include file
Date: Mon, 25 Sep 2017 17:09:27 -0700	[thread overview]
Message-ID: <20170926000931.670-7-f.fainelli@gmail.com> (raw)
In-Reply-To: <20170926000931.670-1-f.fainelli@gmail.com>

Describe the Broadcom Hurricane 2 SoC comprised of a Cortex-A9 CPU
complex along with standard iProc peripherals:

* timers
* SPI controller
* NAND controller
* a single AMAC (Ethernet MAC controller)
* dual PCIe controllers

The design is largely similar to existing iProc-based SoCs such as
Northstar Plus.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 arch/arm/boot/dts/bcm-hr2.dtsi | 368 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 368 insertions(+)
 create mode 100644 arch/arm/boot/dts/bcm-hr2.dtsi

diff --git a/arch/arm/boot/dts/bcm-hr2.dtsi b/arch/arm/boot/dts/bcm-hr2.dtsi
new file mode 100644
index 000000000000..467181b9d609
--- /dev/null
+++ b/arch/arm/boot/dts/bcm-hr2.dtsi
@@ -0,0 +1,368 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2017 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+#include "skeleton.dtsi"
+
+/ {
+	compatible = "brcm,hr2";
+	model = "Broadcom Hurricane 2 SoC";
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x0>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>;
+	};
+
+	mpcore {
+		compatible = "simple-bus";
+		ranges = <0x00000000 0x19000000 0x00023000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		a9pll: arm_clk@00000 {
+			#clock-cells = <0>;
+			compatible = "brcm,hr2-armpll";
+			clocks = <&osc>;
+			reg = <0x00000 0x1000>;
+		};
+
+		timer@20200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x20200 0x100>;
+			interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&periph_clk>;
+		};
+
+		twd-timer@20600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x20600 0x20>;
+			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) |
+						  IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&periph_clk>;
+		};
+
+		twd-watchdog@20620 {
+			compatible = "arm,cortex-a9-twd-wdt";
+			reg = <0x20620 0x20>;
+			interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) |
+						  IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&periph_clk>;
+		};
+
+		gic: interrupt-controller@21000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x21000 0x1000>,
+			      <0x20100 0x100>;
+		};
+
+		L2: l2-cache {
+			compatible = "arm,pl310-cache";
+			reg = <0x22000 0x1000>;
+			cache-unified;
+			cache-level = <2>;
+		};
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		osc: oscillator {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <25000000>;
+		};
+
+		periph_clk: periph_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&a9pll>;
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+	};
+
+	axi {
+		compatible = "simple-bus";
+		ranges = <0x00000000 0x18000000 0x0011c40c>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		uart0: serial@0300 {
+			compatible = "ns16550a";
+			reg = <0x0300 0x100>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc>;
+			status = "disabled";
+		};
+
+		uart1: serial@0400 {
+			compatible = "ns16550a";
+			reg = <0x0400 0x100>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc>;
+			status = "disabled";
+		};
+
+		dma@20000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x20000 0x1000>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			status = "disabled";
+		};
+
+		amac0: ethernet@22000 {
+			compatible = "brcm,nsp-amac";
+			reg = <0x022000 0x1000>,
+			      <0x110000 0x1000>;
+			reg-names = "amac_base", "idm_base";
+			interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		nand: nand@26000 {
+			compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
+			reg = <0x026000 0x600>,
+			      <0x11b408 0x600>,
+			      <0x026f00 0x20>;
+			reg-names = "nand", "iproc-idm", "iproc-ext";
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			brcm,nand-has-wp;
+		};
+
+		gpiob: gpio@30000 {
+			compatible = "brcm,iproc-hr2-gpio", "brcm,iproc-gpio";
+			reg = <0x30000 0x50>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			ngpios = <4>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pwm: pwm@31000 {
+			compatible = "brcm,iproc-pwm";
+			reg = <0x31000 0x28>;
+			clocks = <&osc>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		rng: rng@33000 {
+			compatible = "brcm,bcm-nsp-rng";
+			reg = <0x33000 0x14>;
+		};
+
+		qspi: qspi@27200 {
+			compatible = "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi";
+			reg = <0x027200 0x184>,
+			      <0x027000 0x124>,
+			      <0x11c408 0x004>,
+			      <0x0273a0 0x01c>;
+			reg-names = "mspi", "bspi", "intr_regs",
+				    "intr_status_reg";
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "spi_lr_fullness_reached",
+					  "spi_lr_session_aborted",
+					  "spi_lr_impatient",
+					  "spi_lr_session_done",
+					  "spi_lr_overhead",
+					  "mspi_done",
+					  "mspi_halted";
+			num-cs = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* partitions defined in board DTS */
+		};
+
+		ccbtimer0: timer@34000 {
+			compatible = "arm,sp804";
+			reg = <0x34000 0x1000>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		ccbtimer1: timer@35000 {
+			compatible = "arm,sp804";
+			reg = <0x35000 0x1000>;
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		i2c0: i2c@38000 {
+			compatible = "brcm,iproc-i2c";
+			reg = <0x38000 0x50>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_NONE>;
+			clock-frequency = <100000>;
+		};
+
+		watchdog@39000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x39000 0x1000>;
+			interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		i2c1: i2c@3b000 {
+			compatible = "brcm,iproc-i2c";
+			reg = <0x3b000 0x50>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_NONE>;
+			clock-frequency = <100000>;
+		};
+	};
+
+	pflash: nor@20000000 {
+		compatible = "cfi-flash", "jedec-flash";
+		reg = <0x20000000 0x04000000>;
+		status = "disabled";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* partitions defined in board DTS */
+	};
+
+	pcie0: pcie@18012000 {
+		compatible = "brcm,iproc-pcie";
+		reg = <0x18012000 0x1000>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &gic GIC_SPI 186 IRQ_TYPE_NONE>;
+
+		linux,pci-domain = <0>;
+
+		bus-range = <0x00 0xff>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+
+		/* Note: The HW does not support I/O resources.  So,
+		 * only the memory resource range is being specified.
+		 */
+		ranges = <0x82000000 0 0x08000000 0x08000000 0 0x8000000>;
+
+		status = "disabled";
+
+		msi-parent = <&msi0>;
+		msi0: msi@18012000 {
+			compatible = "brcm,iproc-msi";
+			msi-controller;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 182 IRQ_TYPE_NONE>,
+				     <GIC_SPI 183 IRQ_TYPE_NONE>,
+				     <GIC_SPI 184 IRQ_TYPE_NONE>,
+				     <GIC_SPI 185 IRQ_TYPE_NONE>;
+			brcm,pcie-msi-inten;
+		};
+	};
+
+	pcie1: pcie@18013000 {
+		compatible = "brcm,iproc-pcie";
+		reg = <0x18013000 0x1000>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &gic GIC_SPI 192 IRQ_TYPE_NONE>;
+
+		linux,pci-domain = <1>;
+
+		bus-range = <0x00 0xff>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+
+		/* Note: The HW does not support I/O resources.  So,
+		 * only the memory resource range is being specified.
+		 */
+		ranges = <0x82000000 0 0x40000000 0x40000000 0 0x8000000>;
+
+		status = "disabled";
+
+		msi-parent = <&msi1>;
+		msi1: msi@18013000 {
+			compatible = "brcm,iproc-msi";
+			msi-controller;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_NONE>,
+				     <GIC_SPI 189 IRQ_TYPE_NONE>,
+				     <GIC_SPI 190 IRQ_TYPE_NONE>,
+				     <GIC_SPI 191 IRQ_TYPE_NONE>;
+			brcm,pcie-msi-inten;
+		};
+	};
+};
-- 
2.14.1
