From: Chen-Yu Tsai <wens@csie.org>
To: Mark Brown <broonie@kernel.org>,
Maxime Ripard <maxime.ripard@free-electrons.com>,
David Airlie <airlied@linux.ie>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@codeaurora.org>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>
Cc: Chen-Yu Tsai <wens@csie.org>,
dri-devel@lists.freedesktop.org,
linux-arm-kernel@lists.infradead.org, linux-clk@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-sunxi@googlegroups.com
Subject: [PATCH v2 12/13] ARM: dts: sun6i: Add device node for HDMI controller
Date: Tue, 26 Sep 2017 14:59:18 +0800 [thread overview]
Message-ID: <20170926065919.24446-13-wens@csie.org> (raw)
In-Reply-To: <20170926065919.24446-1-wens@csie.org>
Now that we support the HDMI controller on the A31 SoC, we can add it
to the device tree.
This adds a device node for the HDMI controller, and the of_graph nodes
connecting it to the 2 TCONs.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
arch/arm/boot/dts/sun6i-a31.dtsi | 55 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 55 insertions(+)
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index 93209cda28db..48b2382a18a9 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -289,6 +289,12 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
+
+ tcon0_out_hdmi: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&hdmi_in_tcon0>;
+ allwinner,tcon-channel = <1>;
+ };
};
};
};
@@ -331,6 +337,12 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
+
+ tcon1_out_hdmi: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&hdmi_in_tcon1>;
+ allwinner,tcon-channel = <1>;
+ };
};
};
};
@@ -411,6 +423,49 @@
#size-cells = <0>;
};
+ hdmi: hdmi@01c16000 {
+ compatible = "allwinner,sun6i-a31-hdmi";
+ reg = <0x01c16000 0x1000>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_AHB1_HDMI>, <&ccu CLK_HDMI>,
+ <&ccu CLK_HDMI_DDC>,
+ <&ccu CLK_PLL_VIDEO0_2X>,
+ <&ccu CLK_PLL_VIDEO1_2X>;
+ clock-names = "ahb", "mod", "ddc", "pll-0", "pll-1";
+ resets = <&ccu RST_AHB1_HDMI>;
+ reset-names = "ahb";
+ dma-names = "ddc-tx", "ddc-rx", "audio-tx";
+ dmas = <&dma 13>, <&dma 13>, <&dma 14>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hdmi_in: port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ hdmi_in_tcon0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&tcon0_out_hdmi>;
+ };
+
+ hdmi_in_tcon1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&tcon1_out_hdmi>;
+ };
+ };
+
+ hdmi_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+ };
+ };
+
usb_otg: usb@01c19000 {
compatible = "allwinner,sun6i-a31-musb";
reg = <0x01c19000 0x0400>;
--
2.14.1
WARNING: multiple messages have this Message-ID (diff)
From: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>
To: Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Maxime Ripard
<maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>,
David Airlie <airlied-cv59FeDIM0c@public.gmane.org>,
Michael Turquette
<mturquette-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>,
Stephen Boyd <sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>
Cc: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>,
dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-clk-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org
Subject: [PATCH v2 12/13] ARM: dts: sun6i: Add device node for HDMI controller
Date: Tue, 26 Sep 2017 14:59:18 +0800 [thread overview]
Message-ID: <20170926065919.24446-13-wens@csie.org> (raw)
In-Reply-To: <20170926065919.24446-1-wens-jdAy2FN1RRM@public.gmane.org>
Now that we support the HDMI controller on the A31 SoC, we can add it
to the device tree.
This adds a device node for the HDMI controller, and the of_graph nodes
connecting it to the 2 TCONs.
Signed-off-by: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>
---
arch/arm/boot/dts/sun6i-a31.dtsi | 55 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 55 insertions(+)
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index 93209cda28db..48b2382a18a9 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -289,6 +289,12 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
+
+ tcon0_out_hdmi: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&hdmi_in_tcon0>;
+ allwinner,tcon-channel = <1>;
+ };
};
};
};
@@ -331,6 +337,12 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
+
+ tcon1_out_hdmi: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&hdmi_in_tcon1>;
+ allwinner,tcon-channel = <1>;
+ };
};
};
};
@@ -411,6 +423,49 @@
#size-cells = <0>;
};
+ hdmi: hdmi@01c16000 {
+ compatible = "allwinner,sun6i-a31-hdmi";
+ reg = <0x01c16000 0x1000>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_AHB1_HDMI>, <&ccu CLK_HDMI>,
+ <&ccu CLK_HDMI_DDC>,
+ <&ccu CLK_PLL_VIDEO0_2X>,
+ <&ccu CLK_PLL_VIDEO1_2X>;
+ clock-names = "ahb", "mod", "ddc", "pll-0", "pll-1";
+ resets = <&ccu RST_AHB1_HDMI>;
+ reset-names = "ahb";
+ dma-names = "ddc-tx", "ddc-rx", "audio-tx";
+ dmas = <&dma 13>, <&dma 13>, <&dma 14>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hdmi_in: port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ hdmi_in_tcon0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&tcon0_out_hdmi>;
+ };
+
+ hdmi_in_tcon1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&tcon1_out_hdmi>;
+ };
+ };
+
+ hdmi_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+ };
+ };
+
usb_otg: usb@01c19000 {
compatible = "allwinner,sun6i-a31-musb";
reg = <0x01c19000 0x0400>;
--
2.14.1
WARNING: multiple messages have this Message-ID (diff)
From: wens@csie.org (Chen-Yu Tsai)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 12/13] ARM: dts: sun6i: Add device node for HDMI controller
Date: Tue, 26 Sep 2017 14:59:18 +0800 [thread overview]
Message-ID: <20170926065919.24446-13-wens@csie.org> (raw)
In-Reply-To: <20170926065919.24446-1-wens@csie.org>
Now that we support the HDMI controller on the A31 SoC, we can add it
to the device tree.
This adds a device node for the HDMI controller, and the of_graph nodes
connecting it to the 2 TCONs.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
arch/arm/boot/dts/sun6i-a31.dtsi | 55 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 55 insertions(+)
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index 93209cda28db..48b2382a18a9 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -289,6 +289,12 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
+
+ tcon0_out_hdmi: endpoint at 1 {
+ reg = <1>;
+ remote-endpoint = <&hdmi_in_tcon0>;
+ allwinner,tcon-channel = <1>;
+ };
};
};
};
@@ -331,6 +337,12 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
+
+ tcon1_out_hdmi: endpoint at 1 {
+ reg = <1>;
+ remote-endpoint = <&hdmi_in_tcon1>;
+ allwinner,tcon-channel = <1>;
+ };
};
};
};
@@ -411,6 +423,49 @@
#size-cells = <0>;
};
+ hdmi: hdmi at 01c16000 {
+ compatible = "allwinner,sun6i-a31-hdmi";
+ reg = <0x01c16000 0x1000>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_AHB1_HDMI>, <&ccu CLK_HDMI>,
+ <&ccu CLK_HDMI_DDC>,
+ <&ccu CLK_PLL_VIDEO0_2X>,
+ <&ccu CLK_PLL_VIDEO1_2X>;
+ clock-names = "ahb", "mod", "ddc", "pll-0", "pll-1";
+ resets = <&ccu RST_AHB1_HDMI>;
+ reset-names = "ahb";
+ dma-names = "ddc-tx", "ddc-rx", "audio-tx";
+ dmas = <&dma 13>, <&dma 13>, <&dma 14>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hdmi_in: port at 0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ hdmi_in_tcon0: endpoint at 0 {
+ reg = <0>;
+ remote-endpoint = <&tcon0_out_hdmi>;
+ };
+
+ hdmi_in_tcon1: endpoint at 1 {
+ reg = <1>;
+ remote-endpoint = <&tcon1_out_hdmi>;
+ };
+ };
+
+ hdmi_out: port at 1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+ };
+ };
+
usb_otg: usb at 01c19000 {
compatible = "allwinner,sun6i-a31-musb";
reg = <0x01c19000 0x0400>;
--
2.14.1
next prev parent reply other threads:[~2017-09-26 7:00 UTC|newest]
Thread overview: 74+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-09-26 6:59 [PATCH v2 00/13] drm/sun4i: hdmi: Support HDMI controller on A31 Chen-Yu Tsai
2017-09-26 6:59 ` Chen-Yu Tsai
2017-09-26 6:59 ` Chen-Yu Tsai
2017-09-26 6:59 ` [PATCH v2 01/13] clk: sunxi-ng: sun6i: Export video PLLs Chen-Yu Tsai
2017-09-26 6:59 ` Chen-Yu Tsai
2017-09-26 9:24 ` Maxime Ripard
2017-09-26 9:24 ` Maxime Ripard
2017-09-26 9:24 ` Maxime Ripard
2017-09-26 6:59 ` [PATCH v2 02/13] clk: sunxi-ng: sun6i: Rename HDMI DDC clock to avoid name collision Chen-Yu Tsai
2017-09-26 6:59 ` Chen-Yu Tsai
2017-09-26 6:59 ` Chen-Yu Tsai
2017-09-26 9:32 ` Maxime Ripard
2017-09-26 9:32 ` Maxime Ripard
2017-09-26 9:32 ` Maxime Ripard
2017-09-27 3:45 ` Chen-Yu Tsai
2017-09-27 3:45 ` Chen-Yu Tsai
2017-09-26 6:59 ` [PATCH v2 03/13] drm/sun4i: tcon: Add support for demuxing TCON output on A31 Chen-Yu Tsai
2017-09-26 6:59 ` Chen-Yu Tsai
2017-09-26 6:59 ` Chen-Yu Tsai
2017-09-26 9:56 ` Maxime Ripard
2017-09-26 9:56 ` Maxime Ripard
2017-09-26 9:56 ` Maxime Ripard
2017-09-27 4:03 ` Chen-Yu Tsai
2017-09-27 4:03 ` Chen-Yu Tsai
2017-09-27 4:03 ` Chen-Yu Tsai
2017-09-26 6:59 ` [PATCH v2 04/13] drm/sun4i: hdmi: Disable clks in bind function error path and unbind function Chen-Yu Tsai
2017-09-26 6:59 ` Chen-Yu Tsai
2017-09-26 9:56 ` Maxime Ripard
2017-09-26 9:56 ` Maxime Ripard
2017-09-26 9:56 ` Maxime Ripard
2017-09-26 6:59 ` [PATCH v2 05/13] drm/sun4i: hdmi: create a regmap for later use Chen-Yu Tsai
2017-09-26 6:59 ` Chen-Yu Tsai
2017-09-26 6:59 ` Chen-Yu Tsai
2017-09-26 9:56 ` Maxime Ripard
2017-09-26 9:56 ` Maxime Ripard
2017-09-26 9:56 ` Maxime Ripard
2017-09-26 6:59 ` [PATCH v2 06/13] drm/sun4i: hdmi: Allow using second PLL as TMDS clk parent Chen-Yu Tsai
2017-09-26 6:59 ` Chen-Yu Tsai
2017-09-26 6:59 ` Chen-Yu Tsai
2017-09-26 9:58 ` Maxime Ripard
2017-09-26 9:58 ` Maxime Ripard
2017-09-26 9:58 ` Maxime Ripard
2017-09-26 6:59 ` [PATCH v2 07/13] dt-bindings: display: sun4i: Add binding for A31 HDMI controller Chen-Yu Tsai
2017-09-26 6:59 ` Chen-Yu Tsai
2017-09-26 6:59 ` Chen-Yu Tsai
2017-09-26 6:59 ` [PATCH v2 08/13] regmap: add iopoll-like polling macro for regmap_field Chen-Yu Tsai
2017-09-26 6:59 ` Chen-Yu Tsai
2017-09-26 6:59 ` Chen-Yu Tsai
2017-10-04 11:28 ` Applied "regmap: add iopoll-like polling macro for regmap_field" to the regmap tree Mark Brown
2017-10-04 11:28 ` Mark Brown
2017-10-04 11:28 ` Mark Brown
2017-09-26 6:59 ` [PATCH v2 09/13] drm/sun4i: hdmi: Add support for controller hardware variants Chen-Yu Tsai
2017-09-26 6:59 ` Chen-Yu Tsai
2017-09-26 6:59 ` Chen-Yu Tsai
2017-09-26 10:01 ` Maxime Ripard
2017-09-26 10:01 ` Maxime Ripard
2017-09-26 10:01 ` Maxime Ripard
2017-09-26 6:59 ` [PATCH v2 10/13] drm/sun4i: hdmi: Add A31 specific DDC register definitions Chen-Yu Tsai
2017-09-26 6:59 ` Chen-Yu Tsai
2017-09-26 6:59 ` Chen-Yu Tsai
2017-09-26 10:02 ` Maxime Ripard
2017-09-26 10:02 ` Maxime Ripard
2017-09-26 10:02 ` Maxime Ripard
2017-09-26 6:59 ` [PATCH v2 11/13] drm/sun4i: hdmi: Add support for A31's HDMI controller Chen-Yu Tsai
2017-09-26 6:59 ` Chen-Yu Tsai
2017-09-26 6:59 ` Chen-Yu Tsai
2017-09-26 10:02 ` Maxime Ripard
2017-09-26 10:02 ` Maxime Ripard
2017-09-26 6:59 ` Chen-Yu Tsai [this message]
2017-09-26 6:59 ` [PATCH v2 12/13] ARM: dts: sun6i: Add device node for " Chen-Yu Tsai
2017-09-26 6:59 ` Chen-Yu Tsai
2017-09-26 6:59 ` [PATCH v2 13/13] ARM: dts: sun6i: Enable HDMI support on some A31/A31s devices Chen-Yu Tsai
2017-09-26 6:59 ` Chen-Yu Tsai
2017-09-26 6:59 ` Chen-Yu Tsai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170926065919.24446-13-wens@csie.org \
--to=wens@csie.org \
--cc=airlied@linux.ie \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=mark.rutland@arm.com \
--cc=maxime.ripard@free-electrons.com \
--cc=mturquette@baylibre.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.