From: Peter Rosin <peda@axentia.se>
To: linux-kernel@vger.kernel.org
Cc: Peter Rosin <peda@axentia.se>, Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Russell King <linux@armlinux.org.uk>,
Nicolas Ferre <nicolas.ferre@microchip.com>,
Alexandre Belloni <alexandre.belloni@free-electrons.com>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>, Jaroslav Kysela <perex@perex.cz>,
Takashi Iwai <tiwai@suse.com>,
alsa-devel@alsa-project.org,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org
Subject: [PATCH 2/2] ARM: dts: at91: add devicetree for the Axentia Nattis with Natte power
Date: Fri, 1 Dec 2017 23:44:25 +0100 [thread overview]
Message-ID: <20171201224425.5477-3-peda@axentia.se> (raw)
In-Reply-To: <20171201224425.5477-1-peda@axentia.se>
The Axentia Nattis is a device designed for presenting departures for
public transport systems. The Natte helper board provides power and
features a battery of battery chargers.
Signed-off-by: Peter Rosin <peda@axentia.se>
---
Documentation/devicetree/bindings/arm/axentia.txt | 9 +
MAINTAINERS | 2 +
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/at91-natte.dtsi | 245 ++++++++++++++++++++
arch/arm/boot/dts/at91-nattis-2-natte-2.dts | 258 ++++++++++++++++++++++
5 files changed, 515 insertions(+)
create mode 100644 arch/arm/boot/dts/at91-natte.dtsi
create mode 100644 arch/arm/boot/dts/at91-nattis-2-natte-2.dts
diff --git a/Documentation/devicetree/bindings/arm/axentia.txt b/Documentation/devicetree/bindings/arm/axentia.txt
index ea3fb96ae465..de58f2463880 100644
--- a/Documentation/devicetree/bindings/arm/axentia.txt
+++ b/Documentation/devicetree/bindings/arm/axentia.txt
@@ -10,6 +10,15 @@ compatible = "axentia,linea",
and following the rules from atmel-at91.txt for a sama5d31 SoC.
+Nattis v2 board with Natte v2 power board
+-----------------------------------------
+
+Required root node properties:
+compatible = "axentia,nattis-2", "axentia,natte-2", "axentia,linea",
+ "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
+and following the rules from above for the axentia,linea CPU module.
+
+
TSE-850 v3 board
----------------
diff --git a/MAINTAINERS b/MAINTAINERS
index 2811a211632c..303d04502b8f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2488,6 +2488,8 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: Documentation/devicetree/bindings/arm/axentia.txt
F: arch/arm/boot/dts/at91-linea.dtsi
+F: arch/arm/boot/dts/at91-natte.dtsi
+F: arch/arm/boot/dts/at91-nattis-2-natte-2.dts
F: arch/arm/boot/dts/at91-tse850-3.dts
AXENTIA ASOC DRIVERS
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index eff87a344566..0c10d89adbc8 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -47,6 +47,7 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \
at91sam9x35ek.dtb
dtb-$(CONFIG_SOC_SAM_V7) += \
at91-kizbox2.dtb \
+ at91-nattis-2-natte-2.dtb \
at91-sama5d27_som1_ek.dtb \
at91-sama5d2_xplained.dtb \
at91-sama5d3_xplained.dtb \
diff --git a/arch/arm/boot/dts/at91-natte.dtsi b/arch/arm/boot/dts/at91-natte.dtsi
new file mode 100644
index 000000000000..53b7bb9098f4
--- /dev/null
+++ b/arch/arm/boot/dts/at91-natte.dtsi
@@ -0,0 +1,245 @@
+/*
+ * at91-natte.dts - Device Tree include file for the Natte board
+ *
+ * Copyright (C) 2017 Axentia Technologies AB
+ *
+ * Author: Peter Rosin <peda@axentia.se>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/ {
+ mux: mux-controller {
+ compatible = "gpio-mux";
+ #mux-control-cells = <0>;
+
+ mux-gpios = <&ioexp 0 GPIO_ACTIVE_HIGH>,
+ <&ioexp 1 GPIO_ACTIVE_HIGH>,
+ <&ioexp 2 GPIO_ACTIVE_HIGH>;
+ };
+
+ batntc-mux {
+ compatible = "io-channel-mux";
+ io-channels = <&adc 5>;
+ io-channel-names = "parent";
+ mux-controls = <&mux>;
+
+ channels =
+ "batntc0", "batntc1", "batntc2", "batntc3",
+ "batntc4", "batntc5", "batntc6", "batntc7";
+ };
+
+ batv-mux {
+ compatible = "io-channel-mux";
+ io-channels = <&adc 6>;
+ io-channel-names = "parent";
+ mux-controls = <&mux>;
+
+ channels =
+ "batv0", "batv1", "batv2", "batv3",
+ "batv4", "batv5", "batv6", "batv7";
+ };
+
+ iout-mux {
+ compatible = "io-channel-mux";
+ io-channels = <&adc 7>;
+ io-channel-names = "parent";
+ mux-controls = <&mux>;
+
+ channels =
+ "iout0", "iout1", "iout2", "iout3",
+ "iout4", "iout5", "iout6", "iout7";
+ };
+
+ i2c-mux {
+ compatible = "i2c-mux";
+ mux-locked;
+ i2c-parent = <&i2c0>;
+ mux-controls = <&mux>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bq24735-charger@9 {
+ compatible = "ti,bq24735";
+ reg = <0x9>;
+
+ ti,charge-current = <2000>;
+ ti,charge-voltage = <16800>;
+
+ poll-interval = <20000>;
+ };
+ };
+
+ i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bq24735-charger@9 {
+ compatible = "ti,bq24735";
+ reg = <0x9>;
+
+ ti,charge-current = <2000>;
+ ti,charge-voltage = <16800>;
+
+ poll-interval = <20000>;
+ };
+ };
+
+ i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bq24735-charger@9 {
+ compatible = "ti,bq24735";
+ reg = <0x9>;
+
+ ti,charge-current = <2000>;
+ ti,charge-voltage = <16800>;
+
+ poll-interval = <20000>;
+ };
+ };
+
+ i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bq24735-charger@9 {
+ compatible = "ti,bq24735";
+ reg = <0x9>;
+
+ ti,charge-current = <2000>;
+ ti,charge-voltage = <16800>;
+
+ poll-interval = <20000>;
+ };
+ };
+
+ i2c@4 {
+ reg = <4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bq24735-charger@9 {
+ compatible = "ti,bq24735";
+ reg = <0x9>;
+
+ ti,charge-current = <2000>;
+ ti,charge-voltage = <16800>;
+
+ poll-interval = <20000>;
+ };
+ };
+
+ i2c@5 {
+ reg = <5>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bq24735-charger@9 {
+ compatible = "ti,bq24735";
+ reg = <0x9>;
+
+ ti,charge-current = <2000>;
+ ti,charge-voltage = <16800>;
+
+ poll-interval = <20000>;
+ };
+ };
+
+ i2c@6 {
+ reg = <6>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bq24735-charger@9 {
+ compatible = "ti,bq24735";
+ reg = <0x9>;
+
+ ti,charge-current = <2000>;
+ ti,charge-voltage = <16800>;
+
+ poll-interval = <20000>;
+ };
+ };
+
+ i2c@7 {
+ reg = <7>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bq24735-charger@9 {
+ compatible = "ti,bq24735";
+ reg = <0x9>;
+
+ ti,charge-current = <2000>;
+ ti,charge-voltage = <16800>;
+
+ poll-interval = <20000>;
+ };
+ };
+ };
+};
+
+&i2c0 {
+ status = "okay";
+
+ ioexp: sx1502q@20 {
+ #gpio-cells = <2>;
+ compatible = "semtech,sx1502q";
+ reg = <0x20>;
+
+ gpio-controller;
+ ngpios = <8>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio3_cfg_pins>;
+
+ gpio3_cfg_pins: gpio3_cfg {
+ pins = "gpio3";
+ bias-pull-up;
+ };
+ };
+
+ adc: ads1015@48 {
+ compatible = "ti,ads1015";
+ reg = <0x48>;
+ #io-channel-cells = <1>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@4 {
+ reg = <4>;
+ ti,gain = <2>;
+ ti,datarate = <4>;
+ };
+
+ channel@5 {
+ reg = <5>;
+ ti,gain = <2>;
+ ti,datarate = <4>;
+ };
+
+ channel@6 {
+ reg = <6>;
+ ti,gain = <1>;
+ ti,datarate = <4>;
+ };
+
+ channel@7 {
+ reg = <7>;
+ ti,gain = <3>;
+ ti,datarate = <4>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
new file mode 100644
index 000000000000..c7224cbb50b4
--- /dev/null
+++ b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
@@ -0,0 +1,258 @@
+/*
+ * at91-nattis-2-natte-2.dts - Device Tree file for the Linea/Nattis board
+ *
+ * Copyright (C) 2017 Axentia Technologies AB
+ *
+ * Author: Peter Rosin <peda@axentia.se>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+#include "at91-linea.dtsi"
+#include "sama5d3_lcd.dtsi"
+#include "at91-natte.dtsi"
+
+/ {
+ model = "Axentia Linea-Nattis v2 Natte v2";
+ compatible = "axentia,nattis-2", "axentia,natte-2", "axentia,linea",
+ "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
+
+ ahb {
+ apb {
+ pinctrl@fffff200 {
+ nattis {
+ pinctrl_usba_vbus: usba_vbus {
+ atmel,pins =
+ <AT91_PIOD 28
+ AT91_PERIPH_GPIO
+ AT91_PINCTRL_DEGLITCH>;
+ };
+
+ pinctrl_mmc0_cd: mmc0_cd {
+ atmel,pins =
+ <AT91_PIOD 5
+ AT91_PERIPH_GPIO
+ AT91_PINCTRL_PULL_UP_DEGLITCH>;
+ };
+
+ pinctrl_lcd_prlud0: lcd_prlud0 {
+ atmel,pins =
+ <AT91_PIOA 21
+ AT91_PERIPH_GPIO
+ AT91_PINCTRL_OUTPUT_VAL(0)>;
+ };
+
+ pinctrl_lcd_hipow0: lcd_hipow0 {
+ atmel,pins =
+ <AT91_PIOA 23
+ AT91_PERIPH_GPIO
+ AT91_PINCTRL_OUTPUT_VAL(0)>;
+ };
+ };
+ };
+
+ watchdog@fffffe40 {
+ status = "okay";
+ };
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ wakeup {
+ label = "Wakeup";
+ linux,code = <10>;
+ gpio-key,wakeup;
+ gpios = <&pioB 27 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ panel_reg: panel-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "panel-VCC";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ bl_reg: backlight-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "panel-VDD";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ };
+
+ panel_bl: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&hlcdc_pwm 0 100000 0>;
+
+ brightness-levels = < 0 1 2 3 4 5 6 7 8 9
+ 10 11 12 13 14 15 16 17 18 19
+ 20 21 22 23 24 25 26 27 28 29
+ 30 31 32 33 34 35 36 37 38 39
+ 40 41 42 43 44 45 46 47 48 49
+ 50 51 52 53 54 55 56 57 58 59
+ 60 61 62 63 64 65 66 67 68 69
+ 70 71 72 73 74 75 76 77 78 79
+ 80 81 82 83 84 85 86 87 88 89
+ 90 91 92 93 94 95 96 97 98 99
+ 100>;
+ default-brightness-level = <40>;
+
+ power-supply = <&bl_reg>;
+ enable-gpios = <&pioA 20 GPIO_ACTIVE_HIGH>;
+ };
+
+ panel: panel {
+ compatible = "sharp,lq150x1lg11";
+ backlight = <&panel_bl>;
+ power-supply = <&panel_reg>;
+
+ port {
+ panel_input: endpoint {
+ remote-endpoint = <&hlcdc_panel_output>;
+ };
+ };
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+
+ simple-audio-card,name = "nattis-tfa9879";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&cpu_dai>;
+ simple-audio-card,frame-master = <&cpu_dai>;
+ simple-audio-card,widgets = "Line", "Line Out Jack";
+ simple-audio-card,routing = "Line Out Jack", "LINEOUT";
+
+ cpu_dai: simple-audio-card,cpu {
+ sound-dai = <&ssc0>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&codec>;
+ };
+ };
+};
+
+&i2c0 {
+ status = "okay";
+
+ clock-frequency = <100000>;
+
+ temp@18 {
+ compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+ reg = <0x18>;
+ smbus-timeout-disable;
+ };
+
+ eeprom@50 {
+ compatible = "nxp,24c02";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+
+ codec: codec@6c {
+ compatible = "nxp,tfa9879";
+ reg = <0x6c>;
+ };
+};
+
+&ssc0 {
+ status = "okay";
+
+ atmel,clk-from-rk-pin;
+ #sound-dai-cells = <0>;
+};
+
+&hlcdc {
+ status = "okay";
+
+ hlcdc-display-controller {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcd_base
+ &pinctrl_lcd_rgb565
+ &pinctrl_lcd_prlud0
+ &pinctrl_lcd_hipow0>;
+
+ port@0 {
+ hlcdc_panel_output: endpoint {
+ remote-endpoint = <&panel_input>;
+ };
+ };
+ };
+};
+
+&mmc0 {
+ status = "okay";
+
+ pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0
+ &pinctrl_mmc0_dat1_3
+ &pinctrl_mmc0_cd>;
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ cd-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&usart0 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart0>;
+ atmel,use-dma-rx;
+};
+
+&nand {
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ at91bootstrap@0 {
+ label = "at91bootstrap";
+ reg = <0x0 0x40000>;
+ };
+
+ bootloader@40000 {
+ label = "bootloader";
+ reg = <0x40000 0x80000>;
+ };
+
+ bootloaderenv@c0000 {
+ label = "bootloader env";
+ reg = <0xc0000 0xc0000>;
+ };
+
+ dtb@180000 {
+ label = "device tree";
+ reg = <0x180000 0x80000>;
+ };
+
+ kernel@200000 {
+ label = "kernel";
+ reg = <0x200000 0x600000>;
+ };
+
+ rootfs@800000 {
+ label = "rootfs";
+ reg = <0x800000 0x0f800000>;
+ };
+ };
+};
+
+&dbgu {
+ status = "okay";
+
+ atmel,use-dma-rx;
+};
+
+&usb0 {
+ status = "okay";
+
+ atmel,vbus-gpio = <&pioD 28 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usba_vbus>;
+};
--
2.11.0
WARNING: multiple messages have this Message-ID (diff)
From: Peter Rosin <peda-koto5C5qi+TLoDKTGw+V6w@public.gmane.org>
To: linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: Peter Rosin <peda-koto5C5qi+TLoDKTGw+V6w@public.gmane.org>,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
Russell King <linux-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org>,
Nicolas Ferre
<nicolas.ferre-UWL1GkI3JZL3oGB3hsPCZA@public.gmane.org>,
Alexandre Belloni
<alexandre.belloni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>,
Liam Girdwood <lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Jaroslav Kysela <perex-/Fr2/VpizcU@public.gmane.org>,
Takashi Iwai <tiwai-IBi9RG/b67k@public.gmane.org>,
alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH 2/2] ARM: dts: at91: add devicetree for the Axentia Nattis with Natte power
Date: Fri, 1 Dec 2017 23:44:25 +0100 [thread overview]
Message-ID: <20171201224425.5477-3-peda@axentia.se> (raw)
In-Reply-To: <20171201224425.5477-1-peda-koto5C5qi+TLoDKTGw+V6w@public.gmane.org>
The Axentia Nattis is a device designed for presenting departures for
public transport systems. The Natte helper board provides power and
features a battery of battery chargers.
Signed-off-by: Peter Rosin <peda-koto5C5qi+TLoDKTGw+V6w@public.gmane.org>
---
Documentation/devicetree/bindings/arm/axentia.txt | 9 +
MAINTAINERS | 2 +
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/at91-natte.dtsi | 245 ++++++++++++++++++++
arch/arm/boot/dts/at91-nattis-2-natte-2.dts | 258 ++++++++++++++++++++++
5 files changed, 515 insertions(+)
create mode 100644 arch/arm/boot/dts/at91-natte.dtsi
create mode 100644 arch/arm/boot/dts/at91-nattis-2-natte-2.dts
diff --git a/Documentation/devicetree/bindings/arm/axentia.txt b/Documentation/devicetree/bindings/arm/axentia.txt
index ea3fb96ae465..de58f2463880 100644
--- a/Documentation/devicetree/bindings/arm/axentia.txt
+++ b/Documentation/devicetree/bindings/arm/axentia.txt
@@ -10,6 +10,15 @@ compatible = "axentia,linea",
and following the rules from atmel-at91.txt for a sama5d31 SoC.
+Nattis v2 board with Natte v2 power board
+-----------------------------------------
+
+Required root node properties:
+compatible = "axentia,nattis-2", "axentia,natte-2", "axentia,linea",
+ "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
+and following the rules from above for the axentia,linea CPU module.
+
+
TSE-850 v3 board
----------------
diff --git a/MAINTAINERS b/MAINTAINERS
index 2811a211632c..303d04502b8f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2488,6 +2488,8 @@ L: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org (moderated for non-subscribers)
S: Maintained
F: Documentation/devicetree/bindings/arm/axentia.txt
F: arch/arm/boot/dts/at91-linea.dtsi
+F: arch/arm/boot/dts/at91-natte.dtsi
+F: arch/arm/boot/dts/at91-nattis-2-natte-2.dts
F: arch/arm/boot/dts/at91-tse850-3.dts
AXENTIA ASOC DRIVERS
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index eff87a344566..0c10d89adbc8 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -47,6 +47,7 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \
at91sam9x35ek.dtb
dtb-$(CONFIG_SOC_SAM_V7) += \
at91-kizbox2.dtb \
+ at91-nattis-2-natte-2.dtb \
at91-sama5d27_som1_ek.dtb \
at91-sama5d2_xplained.dtb \
at91-sama5d3_xplained.dtb \
diff --git a/arch/arm/boot/dts/at91-natte.dtsi b/arch/arm/boot/dts/at91-natte.dtsi
new file mode 100644
index 000000000000..53b7bb9098f4
--- /dev/null
+++ b/arch/arm/boot/dts/at91-natte.dtsi
@@ -0,0 +1,245 @@
+/*
+ * at91-natte.dts - Device Tree include file for the Natte board
+ *
+ * Copyright (C) 2017 Axentia Technologies AB
+ *
+ * Author: Peter Rosin <peda-koto5C5qi+TLoDKTGw+V6w@public.gmane.org>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/ {
+ mux: mux-controller {
+ compatible = "gpio-mux";
+ #mux-control-cells = <0>;
+
+ mux-gpios = <&ioexp 0 GPIO_ACTIVE_HIGH>,
+ <&ioexp 1 GPIO_ACTIVE_HIGH>,
+ <&ioexp 2 GPIO_ACTIVE_HIGH>;
+ };
+
+ batntc-mux {
+ compatible = "io-channel-mux";
+ io-channels = <&adc 5>;
+ io-channel-names = "parent";
+ mux-controls = <&mux>;
+
+ channels =
+ "batntc0", "batntc1", "batntc2", "batntc3",
+ "batntc4", "batntc5", "batntc6", "batntc7";
+ };
+
+ batv-mux {
+ compatible = "io-channel-mux";
+ io-channels = <&adc 6>;
+ io-channel-names = "parent";
+ mux-controls = <&mux>;
+
+ channels =
+ "batv0", "batv1", "batv2", "batv3",
+ "batv4", "batv5", "batv6", "batv7";
+ };
+
+ iout-mux {
+ compatible = "io-channel-mux";
+ io-channels = <&adc 7>;
+ io-channel-names = "parent";
+ mux-controls = <&mux>;
+
+ channels =
+ "iout0", "iout1", "iout2", "iout3",
+ "iout4", "iout5", "iout6", "iout7";
+ };
+
+ i2c-mux {
+ compatible = "i2c-mux";
+ mux-locked;
+ i2c-parent = <&i2c0>;
+ mux-controls = <&mux>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bq24735-charger@9 {
+ compatible = "ti,bq24735";
+ reg = <0x9>;
+
+ ti,charge-current = <2000>;
+ ti,charge-voltage = <16800>;
+
+ poll-interval = <20000>;
+ };
+ };
+
+ i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bq24735-charger@9 {
+ compatible = "ti,bq24735";
+ reg = <0x9>;
+
+ ti,charge-current = <2000>;
+ ti,charge-voltage = <16800>;
+
+ poll-interval = <20000>;
+ };
+ };
+
+ i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bq24735-charger@9 {
+ compatible = "ti,bq24735";
+ reg = <0x9>;
+
+ ti,charge-current = <2000>;
+ ti,charge-voltage = <16800>;
+
+ poll-interval = <20000>;
+ };
+ };
+
+ i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bq24735-charger@9 {
+ compatible = "ti,bq24735";
+ reg = <0x9>;
+
+ ti,charge-current = <2000>;
+ ti,charge-voltage = <16800>;
+
+ poll-interval = <20000>;
+ };
+ };
+
+ i2c@4 {
+ reg = <4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bq24735-charger@9 {
+ compatible = "ti,bq24735";
+ reg = <0x9>;
+
+ ti,charge-current = <2000>;
+ ti,charge-voltage = <16800>;
+
+ poll-interval = <20000>;
+ };
+ };
+
+ i2c@5 {
+ reg = <5>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bq24735-charger@9 {
+ compatible = "ti,bq24735";
+ reg = <0x9>;
+
+ ti,charge-current = <2000>;
+ ti,charge-voltage = <16800>;
+
+ poll-interval = <20000>;
+ };
+ };
+
+ i2c@6 {
+ reg = <6>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bq24735-charger@9 {
+ compatible = "ti,bq24735";
+ reg = <0x9>;
+
+ ti,charge-current = <2000>;
+ ti,charge-voltage = <16800>;
+
+ poll-interval = <20000>;
+ };
+ };
+
+ i2c@7 {
+ reg = <7>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bq24735-charger@9 {
+ compatible = "ti,bq24735";
+ reg = <0x9>;
+
+ ti,charge-current = <2000>;
+ ti,charge-voltage = <16800>;
+
+ poll-interval = <20000>;
+ };
+ };
+ };
+};
+
+&i2c0 {
+ status = "okay";
+
+ ioexp: sx1502q@20 {
+ #gpio-cells = <2>;
+ compatible = "semtech,sx1502q";
+ reg = <0x20>;
+
+ gpio-controller;
+ ngpios = <8>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio3_cfg_pins>;
+
+ gpio3_cfg_pins: gpio3_cfg {
+ pins = "gpio3";
+ bias-pull-up;
+ };
+ };
+
+ adc: ads1015@48 {
+ compatible = "ti,ads1015";
+ reg = <0x48>;
+ #io-channel-cells = <1>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@4 {
+ reg = <4>;
+ ti,gain = <2>;
+ ti,datarate = <4>;
+ };
+
+ channel@5 {
+ reg = <5>;
+ ti,gain = <2>;
+ ti,datarate = <4>;
+ };
+
+ channel@6 {
+ reg = <6>;
+ ti,gain = <1>;
+ ti,datarate = <4>;
+ };
+
+ channel@7 {
+ reg = <7>;
+ ti,gain = <3>;
+ ti,datarate = <4>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
new file mode 100644
index 000000000000..c7224cbb50b4
--- /dev/null
+++ b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
@@ -0,0 +1,258 @@
+/*
+ * at91-nattis-2-natte-2.dts - Device Tree file for the Linea/Nattis board
+ *
+ * Copyright (C) 2017 Axentia Technologies AB
+ *
+ * Author: Peter Rosin <peda-koto5C5qi+TLoDKTGw+V6w@public.gmane.org>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+#include "at91-linea.dtsi"
+#include "sama5d3_lcd.dtsi"
+#include "at91-natte.dtsi"
+
+/ {
+ model = "Axentia Linea-Nattis v2 Natte v2";
+ compatible = "axentia,nattis-2", "axentia,natte-2", "axentia,linea",
+ "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
+
+ ahb {
+ apb {
+ pinctrl@fffff200 {
+ nattis {
+ pinctrl_usba_vbus: usba_vbus {
+ atmel,pins =
+ <AT91_PIOD 28
+ AT91_PERIPH_GPIO
+ AT91_PINCTRL_DEGLITCH>;
+ };
+
+ pinctrl_mmc0_cd: mmc0_cd {
+ atmel,pins =
+ <AT91_PIOD 5
+ AT91_PERIPH_GPIO
+ AT91_PINCTRL_PULL_UP_DEGLITCH>;
+ };
+
+ pinctrl_lcd_prlud0: lcd_prlud0 {
+ atmel,pins =
+ <AT91_PIOA 21
+ AT91_PERIPH_GPIO
+ AT91_PINCTRL_OUTPUT_VAL(0)>;
+ };
+
+ pinctrl_lcd_hipow0: lcd_hipow0 {
+ atmel,pins =
+ <AT91_PIOA 23
+ AT91_PERIPH_GPIO
+ AT91_PINCTRL_OUTPUT_VAL(0)>;
+ };
+ };
+ };
+
+ watchdog@fffffe40 {
+ status = "okay";
+ };
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ wakeup {
+ label = "Wakeup";
+ linux,code = <10>;
+ gpio-key,wakeup;
+ gpios = <&pioB 27 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ panel_reg: panel-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "panel-VCC";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ bl_reg: backlight-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "panel-VDD";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ };
+
+ panel_bl: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&hlcdc_pwm 0 100000 0>;
+
+ brightness-levels = < 0 1 2 3 4 5 6 7 8 9
+ 10 11 12 13 14 15 16 17 18 19
+ 20 21 22 23 24 25 26 27 28 29
+ 30 31 32 33 34 35 36 37 38 39
+ 40 41 42 43 44 45 46 47 48 49
+ 50 51 52 53 54 55 56 57 58 59
+ 60 61 62 63 64 65 66 67 68 69
+ 70 71 72 73 74 75 76 77 78 79
+ 80 81 82 83 84 85 86 87 88 89
+ 90 91 92 93 94 95 96 97 98 99
+ 100>;
+ default-brightness-level = <40>;
+
+ power-supply = <&bl_reg>;
+ enable-gpios = <&pioA 20 GPIO_ACTIVE_HIGH>;
+ };
+
+ panel: panel {
+ compatible = "sharp,lq150x1lg11";
+ backlight = <&panel_bl>;
+ power-supply = <&panel_reg>;
+
+ port {
+ panel_input: endpoint {
+ remote-endpoint = <&hlcdc_panel_output>;
+ };
+ };
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+
+ simple-audio-card,name = "nattis-tfa9879";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&cpu_dai>;
+ simple-audio-card,frame-master = <&cpu_dai>;
+ simple-audio-card,widgets = "Line", "Line Out Jack";
+ simple-audio-card,routing = "Line Out Jack", "LINEOUT";
+
+ cpu_dai: simple-audio-card,cpu {
+ sound-dai = <&ssc0>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&codec>;
+ };
+ };
+};
+
+&i2c0 {
+ status = "okay";
+
+ clock-frequency = <100000>;
+
+ temp@18 {
+ compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+ reg = <0x18>;
+ smbus-timeout-disable;
+ };
+
+ eeprom@50 {
+ compatible = "nxp,24c02";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+
+ codec: codec@6c {
+ compatible = "nxp,tfa9879";
+ reg = <0x6c>;
+ };
+};
+
+&ssc0 {
+ status = "okay";
+
+ atmel,clk-from-rk-pin;
+ #sound-dai-cells = <0>;
+};
+
+&hlcdc {
+ status = "okay";
+
+ hlcdc-display-controller {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcd_base
+ &pinctrl_lcd_rgb565
+ &pinctrl_lcd_prlud0
+ &pinctrl_lcd_hipow0>;
+
+ port@0 {
+ hlcdc_panel_output: endpoint {
+ remote-endpoint = <&panel_input>;
+ };
+ };
+ };
+};
+
+&mmc0 {
+ status = "okay";
+
+ pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0
+ &pinctrl_mmc0_dat1_3
+ &pinctrl_mmc0_cd>;
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ cd-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&usart0 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart0>;
+ atmel,use-dma-rx;
+};
+
+&nand {
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ at91bootstrap@0 {
+ label = "at91bootstrap";
+ reg = <0x0 0x40000>;
+ };
+
+ bootloader@40000 {
+ label = "bootloader";
+ reg = <0x40000 0x80000>;
+ };
+
+ bootloaderenv@c0000 {
+ label = "bootloader env";
+ reg = <0xc0000 0xc0000>;
+ };
+
+ dtb@180000 {
+ label = "device tree";
+ reg = <0x180000 0x80000>;
+ };
+
+ kernel@200000 {
+ label = "kernel";
+ reg = <0x200000 0x600000>;
+ };
+
+ rootfs@800000 {
+ label = "rootfs";
+ reg = <0x800000 0x0f800000>;
+ };
+ };
+};
+
+&dbgu {
+ status = "okay";
+
+ atmel,use-dma-rx;
+};
+
+&usb0 {
+ status = "okay";
+
+ atmel,vbus-gpio = <&pioD 28 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usba_vbus>;
+};
--
2.11.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: peda@axentia.se (Peter Rosin)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/2] ARM: dts: at91: add devicetree for the Axentia Nattis with Natte power
Date: Fri, 1 Dec 2017 23:44:25 +0100 [thread overview]
Message-ID: <20171201224425.5477-3-peda@axentia.se> (raw)
In-Reply-To: <20171201224425.5477-1-peda@axentia.se>
The Axentia Nattis is a device designed for presenting departures for
public transport systems. The Natte helper board provides power and
features a battery of battery chargers.
Signed-off-by: Peter Rosin <peda@axentia.se>
---
Documentation/devicetree/bindings/arm/axentia.txt | 9 +
MAINTAINERS | 2 +
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/at91-natte.dtsi | 245 ++++++++++++++++++++
arch/arm/boot/dts/at91-nattis-2-natte-2.dts | 258 ++++++++++++++++++++++
5 files changed, 515 insertions(+)
create mode 100644 arch/arm/boot/dts/at91-natte.dtsi
create mode 100644 arch/arm/boot/dts/at91-nattis-2-natte-2.dts
diff --git a/Documentation/devicetree/bindings/arm/axentia.txt b/Documentation/devicetree/bindings/arm/axentia.txt
index ea3fb96ae465..de58f2463880 100644
--- a/Documentation/devicetree/bindings/arm/axentia.txt
+++ b/Documentation/devicetree/bindings/arm/axentia.txt
@@ -10,6 +10,15 @@ compatible = "axentia,linea",
and following the rules from atmel-at91.txt for a sama5d31 SoC.
+Nattis v2 board with Natte v2 power board
+-----------------------------------------
+
+Required root node properties:
+compatible = "axentia,nattis-2", "axentia,natte-2", "axentia,linea",
+ "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
+and following the rules from above for the axentia,linea CPU module.
+
+
TSE-850 v3 board
----------------
diff --git a/MAINTAINERS b/MAINTAINERS
index 2811a211632c..303d04502b8f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2488,6 +2488,8 @@ L: linux-arm-kernel at lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: Documentation/devicetree/bindings/arm/axentia.txt
F: arch/arm/boot/dts/at91-linea.dtsi
+F: arch/arm/boot/dts/at91-natte.dtsi
+F: arch/arm/boot/dts/at91-nattis-2-natte-2.dts
F: arch/arm/boot/dts/at91-tse850-3.dts
AXENTIA ASOC DRIVERS
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index eff87a344566..0c10d89adbc8 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -47,6 +47,7 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \
at91sam9x35ek.dtb
dtb-$(CONFIG_SOC_SAM_V7) += \
at91-kizbox2.dtb \
+ at91-nattis-2-natte-2.dtb \
at91-sama5d27_som1_ek.dtb \
at91-sama5d2_xplained.dtb \
at91-sama5d3_xplained.dtb \
diff --git a/arch/arm/boot/dts/at91-natte.dtsi b/arch/arm/boot/dts/at91-natte.dtsi
new file mode 100644
index 000000000000..53b7bb9098f4
--- /dev/null
+++ b/arch/arm/boot/dts/at91-natte.dtsi
@@ -0,0 +1,245 @@
+/*
+ * at91-natte.dts - Device Tree include file for the Natte board
+ *
+ * Copyright (C) 2017 Axentia Technologies AB
+ *
+ * Author: Peter Rosin <peda@axentia.se>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/ {
+ mux: mux-controller {
+ compatible = "gpio-mux";
+ #mux-control-cells = <0>;
+
+ mux-gpios = <&ioexp 0 GPIO_ACTIVE_HIGH>,
+ <&ioexp 1 GPIO_ACTIVE_HIGH>,
+ <&ioexp 2 GPIO_ACTIVE_HIGH>;
+ };
+
+ batntc-mux {
+ compatible = "io-channel-mux";
+ io-channels = <&adc 5>;
+ io-channel-names = "parent";
+ mux-controls = <&mux>;
+
+ channels =
+ "batntc0", "batntc1", "batntc2", "batntc3",
+ "batntc4", "batntc5", "batntc6", "batntc7";
+ };
+
+ batv-mux {
+ compatible = "io-channel-mux";
+ io-channels = <&adc 6>;
+ io-channel-names = "parent";
+ mux-controls = <&mux>;
+
+ channels =
+ "batv0", "batv1", "batv2", "batv3",
+ "batv4", "batv5", "batv6", "batv7";
+ };
+
+ iout-mux {
+ compatible = "io-channel-mux";
+ io-channels = <&adc 7>;
+ io-channel-names = "parent";
+ mux-controls = <&mux>;
+
+ channels =
+ "iout0", "iout1", "iout2", "iout3",
+ "iout4", "iout5", "iout6", "iout7";
+ };
+
+ i2c-mux {
+ compatible = "i2c-mux";
+ mux-locked;
+ i2c-parent = <&i2c0>;
+ mux-controls = <&mux>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c at 0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bq24735-charger at 9 {
+ compatible = "ti,bq24735";
+ reg = <0x9>;
+
+ ti,charge-current = <2000>;
+ ti,charge-voltage = <16800>;
+
+ poll-interval = <20000>;
+ };
+ };
+
+ i2c at 1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bq24735-charger at 9 {
+ compatible = "ti,bq24735";
+ reg = <0x9>;
+
+ ti,charge-current = <2000>;
+ ti,charge-voltage = <16800>;
+
+ poll-interval = <20000>;
+ };
+ };
+
+ i2c at 2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bq24735-charger at 9 {
+ compatible = "ti,bq24735";
+ reg = <0x9>;
+
+ ti,charge-current = <2000>;
+ ti,charge-voltage = <16800>;
+
+ poll-interval = <20000>;
+ };
+ };
+
+ i2c at 3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bq24735-charger at 9 {
+ compatible = "ti,bq24735";
+ reg = <0x9>;
+
+ ti,charge-current = <2000>;
+ ti,charge-voltage = <16800>;
+
+ poll-interval = <20000>;
+ };
+ };
+
+ i2c at 4 {
+ reg = <4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bq24735-charger at 9 {
+ compatible = "ti,bq24735";
+ reg = <0x9>;
+
+ ti,charge-current = <2000>;
+ ti,charge-voltage = <16800>;
+
+ poll-interval = <20000>;
+ };
+ };
+
+ i2c at 5 {
+ reg = <5>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bq24735-charger at 9 {
+ compatible = "ti,bq24735";
+ reg = <0x9>;
+
+ ti,charge-current = <2000>;
+ ti,charge-voltage = <16800>;
+
+ poll-interval = <20000>;
+ };
+ };
+
+ i2c at 6 {
+ reg = <6>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bq24735-charger at 9 {
+ compatible = "ti,bq24735";
+ reg = <0x9>;
+
+ ti,charge-current = <2000>;
+ ti,charge-voltage = <16800>;
+
+ poll-interval = <20000>;
+ };
+ };
+
+ i2c at 7 {
+ reg = <7>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bq24735-charger at 9 {
+ compatible = "ti,bq24735";
+ reg = <0x9>;
+
+ ti,charge-current = <2000>;
+ ti,charge-voltage = <16800>;
+
+ poll-interval = <20000>;
+ };
+ };
+ };
+};
+
+&i2c0 {
+ status = "okay";
+
+ ioexp: sx1502q at 20 {
+ #gpio-cells = <2>;
+ compatible = "semtech,sx1502q";
+ reg = <0x20>;
+
+ gpio-controller;
+ ngpios = <8>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio3_cfg_pins>;
+
+ gpio3_cfg_pins: gpio3_cfg {
+ pins = "gpio3";
+ bias-pull-up;
+ };
+ };
+
+ adc: ads1015 at 48 {
+ compatible = "ti,ads1015";
+ reg = <0x48>;
+ #io-channel-cells = <1>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel at 4 {
+ reg = <4>;
+ ti,gain = <2>;
+ ti,datarate = <4>;
+ };
+
+ channel at 5 {
+ reg = <5>;
+ ti,gain = <2>;
+ ti,datarate = <4>;
+ };
+
+ channel at 6 {
+ reg = <6>;
+ ti,gain = <1>;
+ ti,datarate = <4>;
+ };
+
+ channel at 7 {
+ reg = <7>;
+ ti,gain = <3>;
+ ti,datarate = <4>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
new file mode 100644
index 000000000000..c7224cbb50b4
--- /dev/null
+++ b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
@@ -0,0 +1,258 @@
+/*
+ * at91-nattis-2-natte-2.dts - Device Tree file for the Linea/Nattis board
+ *
+ * Copyright (C) 2017 Axentia Technologies AB
+ *
+ * Author: Peter Rosin <peda@axentia.se>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+#include "at91-linea.dtsi"
+#include "sama5d3_lcd.dtsi"
+#include "at91-natte.dtsi"
+
+/ {
+ model = "Axentia Linea-Nattis v2 Natte v2";
+ compatible = "axentia,nattis-2", "axentia,natte-2", "axentia,linea",
+ "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
+
+ ahb {
+ apb {
+ pinctrl at fffff200 {
+ nattis {
+ pinctrl_usba_vbus: usba_vbus {
+ atmel,pins =
+ <AT91_PIOD 28
+ AT91_PERIPH_GPIO
+ AT91_PINCTRL_DEGLITCH>;
+ };
+
+ pinctrl_mmc0_cd: mmc0_cd {
+ atmel,pins =
+ <AT91_PIOD 5
+ AT91_PERIPH_GPIO
+ AT91_PINCTRL_PULL_UP_DEGLITCH>;
+ };
+
+ pinctrl_lcd_prlud0: lcd_prlud0 {
+ atmel,pins =
+ <AT91_PIOA 21
+ AT91_PERIPH_GPIO
+ AT91_PINCTRL_OUTPUT_VAL(0)>;
+ };
+
+ pinctrl_lcd_hipow0: lcd_hipow0 {
+ atmel,pins =
+ <AT91_PIOA 23
+ AT91_PERIPH_GPIO
+ AT91_PINCTRL_OUTPUT_VAL(0)>;
+ };
+ };
+ };
+
+ watchdog at fffffe40 {
+ status = "okay";
+ };
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ wakeup {
+ label = "Wakeup";
+ linux,code = <10>;
+ gpio-key,wakeup;
+ gpios = <&pioB 27 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ panel_reg: panel-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "panel-VCC";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ bl_reg: backlight-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "panel-VDD";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ };
+
+ panel_bl: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&hlcdc_pwm 0 100000 0>;
+
+ brightness-levels = < 0 1 2 3 4 5 6 7 8 9
+ 10 11 12 13 14 15 16 17 18 19
+ 20 21 22 23 24 25 26 27 28 29
+ 30 31 32 33 34 35 36 37 38 39
+ 40 41 42 43 44 45 46 47 48 49
+ 50 51 52 53 54 55 56 57 58 59
+ 60 61 62 63 64 65 66 67 68 69
+ 70 71 72 73 74 75 76 77 78 79
+ 80 81 82 83 84 85 86 87 88 89
+ 90 91 92 93 94 95 96 97 98 99
+ 100>;
+ default-brightness-level = <40>;
+
+ power-supply = <&bl_reg>;
+ enable-gpios = <&pioA 20 GPIO_ACTIVE_HIGH>;
+ };
+
+ panel: panel {
+ compatible = "sharp,lq150x1lg11";
+ backlight = <&panel_bl>;
+ power-supply = <&panel_reg>;
+
+ port {
+ panel_input: endpoint {
+ remote-endpoint = <&hlcdc_panel_output>;
+ };
+ };
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+
+ simple-audio-card,name = "nattis-tfa9879";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&cpu_dai>;
+ simple-audio-card,frame-master = <&cpu_dai>;
+ simple-audio-card,widgets = "Line", "Line Out Jack";
+ simple-audio-card,routing = "Line Out Jack", "LINEOUT";
+
+ cpu_dai: simple-audio-card,cpu {
+ sound-dai = <&ssc0>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&codec>;
+ };
+ };
+};
+
+&i2c0 {
+ status = "okay";
+
+ clock-frequency = <100000>;
+
+ temp at 18 {
+ compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+ reg = <0x18>;
+ smbus-timeout-disable;
+ };
+
+ eeprom at 50 {
+ compatible = "nxp,24c02";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+
+ codec: codec at 6c {
+ compatible = "nxp,tfa9879";
+ reg = <0x6c>;
+ };
+};
+
+&ssc0 {
+ status = "okay";
+
+ atmel,clk-from-rk-pin;
+ #sound-dai-cells = <0>;
+};
+
+&hlcdc {
+ status = "okay";
+
+ hlcdc-display-controller {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcd_base
+ &pinctrl_lcd_rgb565
+ &pinctrl_lcd_prlud0
+ &pinctrl_lcd_hipow0>;
+
+ port at 0 {
+ hlcdc_panel_output: endpoint {
+ remote-endpoint = <&panel_input>;
+ };
+ };
+ };
+};
+
+&mmc0 {
+ status = "okay";
+
+ pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0
+ &pinctrl_mmc0_dat1_3
+ &pinctrl_mmc0_cd>;
+
+ slot at 0 {
+ reg = <0>;
+ bus-width = <4>;
+ cd-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&usart0 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart0>;
+ atmel,use-dma-rx;
+};
+
+&nand {
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ at91bootstrap at 0 {
+ label = "at91bootstrap";
+ reg = <0x0 0x40000>;
+ };
+
+ bootloader at 40000 {
+ label = "bootloader";
+ reg = <0x40000 0x80000>;
+ };
+
+ bootloaderenv at c0000 {
+ label = "bootloader env";
+ reg = <0xc0000 0xc0000>;
+ };
+
+ dtb at 180000 {
+ label = "device tree";
+ reg = <0x180000 0x80000>;
+ };
+
+ kernel at 200000 {
+ label = "kernel";
+ reg = <0x200000 0x600000>;
+ };
+
+ rootfs at 800000 {
+ label = "rootfs";
+ reg = <0x800000 0x0f800000>;
+ };
+ };
+};
+
+&dbgu {
+ status = "okay";
+
+ atmel,use-dma-rx;
+};
+
+&usb0 {
+ status = "okay";
+
+ atmel,vbus-gpio = <&pioD 28 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usba_vbus>;
+};
--
2.11.0
next prev parent reply other threads:[~2017-12-01 22:44 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-01 22:44 [PATCH 0/2] Add devicetree for Axentia Nattis Peter Rosin
2017-12-01 22:44 ` Peter Rosin
2017-12-01 22:44 ` Peter Rosin
2017-12-01 22:44 ` [PATCH 1/2] dt-bindings: trivial: add tfa9879 device Peter Rosin
2017-12-01 22:44 ` Peter Rosin
2017-12-01 22:44 ` Peter Rosin
2017-12-02 21:17 ` [alsa-devel] " Fabio Estevam
2017-12-02 21:17 ` Fabio Estevam
2017-12-02 21:17 ` Fabio Estevam
2017-12-03 6:59 ` Peter Rosin
2017-12-03 6:59 ` Peter Rosin
2017-12-03 6:59 ` Peter Rosin
2017-12-03 11:12 ` Fabio Estevam
2017-12-03 11:12 ` Fabio Estevam
2017-12-03 11:12 ` Fabio Estevam
2017-12-03 20:53 ` Peter Rosin
2017-12-03 20:53 ` Peter Rosin
2017-12-03 20:53 ` Peter Rosin
2017-12-03 21:01 ` Fabio Estevam
2017-12-03 21:01 ` Fabio Estevam
2017-12-03 21:01 ` Fabio Estevam
2017-12-01 22:44 ` Peter Rosin [this message]
2017-12-01 22:44 ` [PATCH 2/2] ARM: dts: at91: add devicetree for the Axentia Nattis with Natte power Peter Rosin
2017-12-01 22:44 ` Peter Rosin
2017-12-02 1:05 ` [PATCH 0/2] Add devicetree for Axentia Nattis Javier Martinez Canillas
2017-12-02 1:05 ` Javier Martinez Canillas
2017-12-02 1:05 ` Javier Martinez Canillas
2017-12-02 7:58 ` Peter Rosin
2017-12-02 7:58 ` Peter Rosin
2017-12-02 7:58 ` Peter Rosin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171201224425.5477-3-peda@axentia.se \
--to=peda@axentia.se \
--cc=alexandre.belloni@free-electrons.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=mark.rutland@arm.com \
--cc=nicolas.ferre@microchip.com \
--cc=perex@perex.cz \
--cc=robh+dt@kernel.org \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.