From: Tony Lindgren <tony@atomide.com>
To: linux-omap@vger.kernel.org
Cc: Dave Gerlach <d-gerlach@ti.com>, Nishanth Menon <nm@ti.com>,
Suman Anna <s-anna@ti.com>, Tero Kristo <t-kristo@ti.com>,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Tony Lindgren <tony@atomide.com>
Subject: [PATCH 05/12] bus: ti-sysc: Remove unnecessary debugging statements
Date: Fri, 23 Feb 2018 13:00:53 -0800 [thread overview]
Message-ID: <20180223210100.86732-6-tony@atomide.com> (raw)
In-Reply-To: <20180223210100.86732-1-tony@atomide.com>
We already show the status for the interconnect target module
when debugging is enabled, there's no need to be more verbose
about that. So let's just cut down the noise and remove the
extra debug statements.
Signed-off-by: Tony Lindgren <tony@atomide.coM>
---
drivers/bus/ti-sysc.c | 9 +--------
1 file changed, 1 insertion(+), 8 deletions(-)
diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c
--- a/drivers/bus/ti-sysc.c
+++ b/drivers/bus/ti-sysc.c
@@ -201,9 +201,6 @@ static int sysc_parse_and_check_child_range(struct sysc *ddata)
ddata->module_pa = of_translate_address(np, ranges++);
ddata->module_size = be32_to_cpup(ranges);
- dev_dbg(ddata->dev, "interconnect target 0x%llx size 0x%x for %pOF\n",
- ddata->module_pa, ddata->module_size, np);
-
return 0;
}
@@ -296,11 +293,8 @@ static int sysc_check_children(struct sysc *ddata)
*/
static void sysc_check_quirk_16bit(struct sysc *ddata, struct resource *res)
{
- if (resource_size(res) == 8) {
- dev_dbg(ddata->dev,
- "enabling 16-bit and clockactivity quirks\n");
+ if (resource_size(res) == 8)
ddata->cfg.quirks |= SYSC_QUIRK_16BIT | SYSC_QUIRK_USE_CLOCKACT;
- }
}
/**
@@ -326,7 +320,6 @@ static int sysc_parse_one(struct sysc *ddata, enum sysc_registers reg)
res = platform_get_resource_byname(to_platform_device(ddata->dev),
IORESOURCE_MEM, name);
if (!res) {
- dev_dbg(ddata->dev, "has no %s register\n", name);
ddata->offsets[reg] = -ENODEV;
return 0;
--
2.16.2
WARNING: multiple messages have this Message-ID (diff)
From: Tony Lindgren <tony@atomide.com>
To: linux-omap@vger.kernel.org
Cc: Nishanth Menon <nm@ti.com>, Dave Gerlach <d-gerlach@ti.com>,
Tony Lindgren <tony@atomide.coM>,
linux-kernel@vger.kernel.org, Tero Kristo <t-kristo@ti.com>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 05/12] bus: ti-sysc: Remove unnecessary debugging statements
Date: Fri, 23 Feb 2018 13:00:53 -0800 [thread overview]
Message-ID: <20180223210100.86732-6-tony@atomide.com> (raw)
In-Reply-To: <20180223210100.86732-1-tony@atomide.com>
We already show the status for the interconnect target module
when debugging is enabled, there's no need to be more verbose
about that. So let's just cut down the noise and remove the
extra debug statements.
Signed-off-by: Tony Lindgren <tony@atomide.coM>
---
drivers/bus/ti-sysc.c | 9 +--------
1 file changed, 1 insertion(+), 8 deletions(-)
diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c
--- a/drivers/bus/ti-sysc.c
+++ b/drivers/bus/ti-sysc.c
@@ -201,9 +201,6 @@ static int sysc_parse_and_check_child_range(struct sysc *ddata)
ddata->module_pa = of_translate_address(np, ranges++);
ddata->module_size = be32_to_cpup(ranges);
- dev_dbg(ddata->dev, "interconnect target 0x%llx size 0x%x for %pOF\n",
- ddata->module_pa, ddata->module_size, np);
-
return 0;
}
@@ -296,11 +293,8 @@ static int sysc_check_children(struct sysc *ddata)
*/
static void sysc_check_quirk_16bit(struct sysc *ddata, struct resource *res)
{
- if (resource_size(res) == 8) {
- dev_dbg(ddata->dev,
- "enabling 16-bit and clockactivity quirks\n");
+ if (resource_size(res) == 8)
ddata->cfg.quirks |= SYSC_QUIRK_16BIT | SYSC_QUIRK_USE_CLOCKACT;
- }
}
/**
@@ -326,7 +320,6 @@ static int sysc_parse_one(struct sysc *ddata, enum sysc_registers reg)
res = platform_get_resource_byname(to_platform_device(ddata->dev),
IORESOURCE_MEM, name);
if (!res) {
- dev_dbg(ddata->dev, "has no %s register\n", name);
ddata->offsets[reg] = -ENODEV;
return 0;
--
2.16.2
WARNING: multiple messages have this Message-ID (diff)
From: tony@atomide.com (Tony Lindgren)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 05/12] bus: ti-sysc: Remove unnecessary debugging statements
Date: Fri, 23 Feb 2018 13:00:53 -0800 [thread overview]
Message-ID: <20180223210100.86732-6-tony@atomide.com> (raw)
In-Reply-To: <20180223210100.86732-1-tony@atomide.com>
We already show the status for the interconnect target module
when debugging is enabled, there's no need to be more verbose
about that. So let's just cut down the noise and remove the
extra debug statements.
Signed-off-by: Tony Lindgren <tony@atomide.coM>
---
drivers/bus/ti-sysc.c | 9 +--------
1 file changed, 1 insertion(+), 8 deletions(-)
diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c
--- a/drivers/bus/ti-sysc.c
+++ b/drivers/bus/ti-sysc.c
@@ -201,9 +201,6 @@ static int sysc_parse_and_check_child_range(struct sysc *ddata)
ddata->module_pa = of_translate_address(np, ranges++);
ddata->module_size = be32_to_cpup(ranges);
- dev_dbg(ddata->dev, "interconnect target 0x%llx size 0x%x for %pOF\n",
- ddata->module_pa, ddata->module_size, np);
-
return 0;
}
@@ -296,11 +293,8 @@ static int sysc_check_children(struct sysc *ddata)
*/
static void sysc_check_quirk_16bit(struct sysc *ddata, struct resource *res)
{
- if (resource_size(res) == 8) {
- dev_dbg(ddata->dev,
- "enabling 16-bit and clockactivity quirks\n");
+ if (resource_size(res) == 8)
ddata->cfg.quirks |= SYSC_QUIRK_16BIT | SYSC_QUIRK_USE_CLOCKACT;
- }
}
/**
@@ -326,7 +320,6 @@ static int sysc_parse_one(struct sysc *ddata, enum sysc_registers reg)
res = platform_get_resource_byname(to_platform_device(ddata->dev),
IORESOURCE_MEM, name);
if (!res) {
- dev_dbg(ddata->dev, "has no %s register\n", name);
ddata->offsets[reg] = -ENODEV;
return 0;
--
2.16.2
next prev parent reply other threads:[~2018-02-23 21:01 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-23 21:00 [PATCH 00/12] Use dts data for ti-sysc to configure sysconfig Tony Lindgren
2018-02-23 21:00 ` Tony Lindgren
2018-02-23 21:00 ` Tony Lindgren
2018-02-23 21:00 ` [PATCH 01/12] bus: ti-sysc: Add fck clock alias for children with notifier_block Tony Lindgren
2018-02-23 21:00 ` Tony Lindgren
2018-02-23 21:00 ` Tony Lindgren
2018-02-23 21:00 ` [PATCH 02/12] bus: ti-sysc: Add suspend and resume handling Tony Lindgren
2018-02-23 21:00 ` Tony Lindgren
2018-02-23 21:00 ` Tony Lindgren
2018-02-23 21:00 ` [PATCH 03/12] bus: ti-sysc: Handle stdout-path for debug console Tony Lindgren
2018-02-23 21:00 ` Tony Lindgren
2018-02-23 21:00 ` Tony Lindgren
2018-02-23 21:00 ` [PATCH 04/12] bus: ti-sysc: Improve handling for no-reset-on-init and no-idle-on-init Tony Lindgren
2018-02-23 21:00 ` Tony Lindgren
2018-02-23 21:00 ` Tony Lindgren
2018-02-23 21:00 ` Tony Lindgren [this message]
2018-02-23 21:00 ` [PATCH 05/12] bus: ti-sysc: Remove unnecessary debugging statements Tony Lindgren
2018-02-23 21:00 ` Tony Lindgren
2018-02-23 21:00 ` [PATCH 06/12] bus: ti-sysc: Add support for platform data callbacks Tony Lindgren
2018-02-23 21:00 ` Tony Lindgren
2018-02-23 21:00 ` Tony Lindgren
2018-02-23 21:00 ` [PATCH 07/12] bus: ti-sysc: Handle some devices in omap_device compatible way Tony Lindgren
2018-02-23 21:00 ` Tony Lindgren
2018-02-23 21:00 ` Tony Lindgren
2018-03-01 0:37 ` Tony Lindgren
2018-03-01 0:37 ` Tony Lindgren
2018-02-23 21:00 ` [PATCH 08/12] ARM: OMAP2+: Add functions to allocate module data from device tree Tony Lindgren
2018-02-23 21:00 ` Tony Lindgren
2018-02-23 21:00 ` Tony Lindgren
2018-02-23 21:00 ` [PATCH 09/12] ARM: OMAP2+: Add checks for device tree based sysconfig data Tony Lindgren
2018-02-23 21:00 ` Tony Lindgren
2018-02-23 21:00 ` Tony Lindgren
2018-02-23 21:00 ` [PATCH 10/12] ARM: OMAP2+: Try to parse earlycon from parent too Tony Lindgren
2018-02-23 21:00 ` Tony Lindgren
2018-02-23 21:00 ` Tony Lindgren
2018-02-23 21:00 ` [PATCH 11/12] PM / AVS: SmartReflex: Prepare to use device tree based probing Tony Lindgren
2018-02-23 21:00 ` Tony Lindgren
2018-02-23 21:00 ` Tony Lindgren
2018-02-26 10:37 ` Rafael J. Wysocki
2018-02-26 10:37 ` Rafael J. Wysocki
2018-02-26 21:34 ` Tony Lindgren
2018-02-26 21:34 ` Tony Lindgren
2018-03-01 3:07 ` Kevin Hilman
2018-03-01 3:07 ` Kevin Hilman
2018-03-01 3:49 ` Tony Lindgren
2018-03-01 3:49 ` Tony Lindgren
2018-02-23 21:01 ` [PATCH 12/12] ARM: OMAP2+: Enable ti-sysc to use device tree data for smartreflex Tony Lindgren
2018-02-23 21:01 ` Tony Lindgren
2018-02-23 21:01 ` Tony Lindgren
2018-02-23 21:41 ` [PATCH 0.5/12] ARM: OMAP2+: Prepare to pass auxdata " Tony Lindgren
2018-02-23 21:41 ` Tony Lindgren
2018-02-23 21:41 ` Tony Lindgren
2018-02-26 8:37 ` kbuild test robot
2018-02-26 8:37 ` kbuild test robot
2018-02-26 22:23 ` Tony Lindgren
2018-02-26 22:23 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180223210100.86732-6-tony@atomide.com \
--to=tony@atomide.com \
--cc=d-gerlach@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=nm@ti.com \
--cc=s-anna@ti.com \
--cc=t-kristo@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.