From: Arnd Bergmann <arnd@arndb.de>
To: linux-arch@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, Arnd Bergmann <arnd@arndb.de>,
linux-block@vger.kernel.org, linux-ide@vger.kernel.org,
linux-input@vger.kernel.org, netdev@vger.kernel.org,
linux-wireless@vger.kernel.org, linux-pwm@vger.kernel.org,
linux-rtc@vger.kernel.org, linux-spi@vger.kernel.org,
linux-usb@vger.kernel.org, dri-devel@lists.freedesktop.org,
linux-fbdev@vger.kernel.org, linux-watchdog@vger.kernel.org,
linux-fsdevel@vger.kernel.org, linux-mm@kvack.org
Subject: [PATCH 11/16] treewide: simplify Kconfig dependencies for removed archs
Date: Wed, 14 Mar 2018 15:43:46 +0100 [thread overview]
Message-ID: <20180314144614.1632190-1-arnd@arndb.de> (raw)
In-Reply-To: <20180314143529.1456168-1-arnd@arndb.de>
A lot of Kconfig symbols have architecture specific dependencies.
In those cases that depend on architectures we have already removed,
they can be omitted.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
block/bounce.c | 2 +-
drivers/ide/Kconfig | 2 +-
drivers/ide/ide-generic.c | 12 +-----------
drivers/input/joystick/analog.c | 2 +-
drivers/isdn/hisax/Kconfig | 10 +++++-----
drivers/net/ethernet/davicom/Kconfig | 2 +-
drivers/net/ethernet/smsc/Kconfig | 6 +++---
drivers/net/wireless/cisco/Kconfig | 2 +-
drivers/pwm/Kconfig | 2 +-
drivers/rtc/Kconfig | 2 +-
drivers/spi/Kconfig | 4 ++--
drivers/usb/musb/Kconfig | 2 +-
drivers/video/console/Kconfig | 3 +--
drivers/watchdog/Kconfig | 6 ------
drivers/watchdog/Makefile | 6 ------
fs/Kconfig.binfmt | 5 ++---
fs/minix/Kconfig | 2 +-
include/linux/ide.h | 7 +------
init/Kconfig | 5 ++---
lib/Kconfig.debug | 13 +++++--------
lib/test_user_copy.c | 2 --
mm/Kconfig | 7 -------
mm/percpu.c | 4 ----
23 files changed, 31 insertions(+), 77 deletions(-)
diff --git a/block/bounce.c b/block/bounce.c
index 6a3e68292273..dd0b93f2a871 100644
--- a/block/bounce.c
+++ b/block/bounce.c
@@ -31,7 +31,7 @@
static struct bio_set *bounce_bio_set, *bounce_bio_split;
static mempool_t *page_pool, *isa_page_pool;
-#if defined(CONFIG_HIGHMEM) || defined(CONFIG_NEED_BOUNCE_POOL)
+#if defined(CONFIG_HIGHMEM)
static __init int init_emergency_pool(void)
{
#if defined(CONFIG_HIGHMEM) && !defined(CONFIG_MEMORY_HOTPLUG)
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index cf1fb3fb5d26..901b8833847f 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -200,7 +200,7 @@ comment "IDE chipset support/bugfixes"
config IDE_GENERIC
tristate "generic/default IDE chipset support"
- depends on ALPHA || X86 || IA64 || M32R || MIPS || ARCH_RPC
+ depends on ALPHA || X86 || IA64 || MIPS || ARCH_RPC
default ARM && ARCH_RPC
help
This is the generic IDE driver. This driver attaches to the
diff --git a/drivers/ide/ide-generic.c b/drivers/ide/ide-generic.c
index 54d7c4685d23..80c0d69b83ac 100644
--- a/drivers/ide/ide-generic.c
+++ b/drivers/ide/ide-generic.c
@@ -13,13 +13,10 @@
#include <linux/ide.h>
#include <linux/pci_ids.h>
-/* FIXME: convert arm and m32r to use ide_platform host driver */
+/* FIXME: convert arm to use ide_platform host driver */
#ifdef CONFIG_ARM
#include <asm/irq.h>
#endif
-#ifdef CONFIG_M32R
-#include <asm/m32r.h>
-#endif
#define DRV_NAME "ide_generic"
@@ -35,13 +32,6 @@ static const struct ide_port_info ide_generic_port_info = {
#ifdef CONFIG_ARM
static const u16 legacy_bases[] = { 0x1f0 };
static const int legacy_irqs[] = { IRQ_HARDDISK };
-#elif defined(CONFIG_PLAT_M32700UT) || defined(CONFIG_PLAT_MAPPI2) || \
- defined(CONFIG_PLAT_OPSPUT)
-static const u16 legacy_bases[] = { 0x1f0 };
-static const int legacy_irqs[] = { PLD_IRQ_CFIREQ };
-#elif defined(CONFIG_PLAT_MAPPI3)
-static const u16 legacy_bases[] = { 0x1f0, 0x170 };
-static const int legacy_irqs[] = { PLD_IRQ_CFIREQ, PLD_IRQ_IDEIREQ };
#elif defined(CONFIG_ALPHA)
static const u16 legacy_bases[] = { 0x1f0, 0x170, 0x1e8, 0x168 };
static const int legacy_irqs[] = { 14, 15, 11, 10 };
diff --git a/drivers/input/joystick/analog.c b/drivers/input/joystick/analog.c
index be1b4921f22a..eefac7978f93 100644
--- a/drivers/input/joystick/analog.c
+++ b/drivers/input/joystick/analog.c
@@ -163,7 +163,7 @@ static unsigned int get_time_pit(void)
#define GET_TIME(x) do { x = (unsigned int)rdtsc(); } while (0)
#define DELTA(x,y) ((y)-(x))
#define TIME_NAME "TSC"
-#elif defined(__alpha__) || defined(CONFIG_ARM) || defined(CONFIG_ARM64) || defined(CONFIG_RISCV) || defined(CONFIG_TILE)
+#elif defined(__alpha__) || defined(CONFIG_ARM) || defined(CONFIG_ARM64) || defined(CONFIG_RISCV)
#define GET_TIME(x) do { x = get_cycles(); } while (0)
#define DELTA(x,y) ((y)-(x))
#define TIME_NAME "get_cycles"
diff --git a/drivers/isdn/hisax/Kconfig b/drivers/isdn/hisax/Kconfig
index eb83d94ab4fe..38cfc8baae19 100644
--- a/drivers/isdn/hisax/Kconfig
+++ b/drivers/isdn/hisax/Kconfig
@@ -109,7 +109,7 @@ config HISAX_16_3
config HISAX_TELESPCI
bool "Teles PCI"
- depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV || (XTENSA && !CPU_LITTLE_ENDIAN)))
+ depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || (XTENSA && !CPU_LITTLE_ENDIAN)))
help
This enables HiSax support for the Teles PCI.
See <file:Documentation/isdn/README.HiSax> on how to configure it.
@@ -237,7 +237,7 @@ config HISAX_MIC
config HISAX_NETJET
bool "NETjet card"
- depends on PCI && (BROKEN || !(PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV || (XTENSA && !CPU_LITTLE_ENDIAN) || MICROBLAZE))
+ depends on PCI && (BROKEN || !(PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || (XTENSA && !CPU_LITTLE_ENDIAN) || MICROBLAZE))
depends on VIRT_TO_BUS
help
This enables HiSax support for the NetJet from Traverse
@@ -249,7 +249,7 @@ config HISAX_NETJET
config HISAX_NETJET_U
bool "NETspider U card"
- depends on PCI && (BROKEN || !(PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV || (XTENSA && !CPU_LITTLE_ENDIAN) || MICROBLAZE))
+ depends on PCI && (BROKEN || !(PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || (XTENSA && !CPU_LITTLE_ENDIAN) || MICROBLAZE))
depends on VIRT_TO_BUS
help
This enables HiSax support for the Netspider U interface ISDN card
@@ -318,7 +318,7 @@ config HISAX_GAZEL
config HISAX_HFC_PCI
bool "HFC PCI-Bus cards"
- depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV || (XTENSA && !CPU_LITTLE_ENDIAN)))
+ depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || (XTENSA && !CPU_LITTLE_ENDIAN)))
help
This enables HiSax support for the HFC-S PCI 2BDS0 based cards.
@@ -343,7 +343,7 @@ config HISAX_HFC_SX
config HISAX_ENTERNOW_PCI
bool "Formula-n enter:now PCI card"
- depends on HISAX_NETJET && PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV || (XTENSA && !CPU_LITTLE_ENDIAN)))
+ depends on HISAX_NETJET && PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || (XTENSA && !CPU_LITTLE_ENDIAN)))
help
This enables HiSax support for the Formula-n enter:now PCI
ISDN card.
diff --git a/drivers/net/ethernet/davicom/Kconfig b/drivers/net/ethernet/davicom/Kconfig
index 7ec2d74f94d3..680a6d983f37 100644
--- a/drivers/net/ethernet/davicom/Kconfig
+++ b/drivers/net/ethernet/davicom/Kconfig
@@ -4,7 +4,7 @@
config DM9000
tristate "DM9000 support"
- depends on ARM || BLACKFIN || MIPS || COLDFIRE || NIOS2
+ depends on ARM || MIPS || COLDFIRE || NIOS2
select CRC32
select MII
---help---
diff --git a/drivers/net/ethernet/smsc/Kconfig b/drivers/net/ethernet/smsc/Kconfig
index 948603e9b905..3da0c573d2ab 100644
--- a/drivers/net/ethernet/smsc/Kconfig
+++ b/drivers/net/ethernet/smsc/Kconfig
@@ -5,8 +5,8 @@
config NET_VENDOR_SMSC
bool "SMC (SMSC)/Western Digital devices"
default y
- depends on ARM || ARM64 || ATARI_ETHERNAT || BLACKFIN || COLDFIRE || \
- ISA || M32R || MAC || MIPS || NIOS2 || PCI || \
+ depends on ARM || ARM64 || ATARI_ETHERNAT || COLDFIRE || \
+ ISA || MAC || MIPS || NIOS2 || PCI || \
PCMCIA || SUPERH || XTENSA || H8300
---help---
If you have a network (Ethernet) card belonging to this class, say Y.
@@ -37,7 +37,7 @@ config SMC91X
select CRC32
select MII
depends on !OF || GPIOLIB
- depends on ARM || ARM64 || ATARI_ETHERNAT || BLACKFIN || COLDFIRE || \
+ depends on ARM || ARM64 || ATARI_ETHERNAT || COLDFIRE || \
M32R || MIPS || NIOS2 || SUPERH || XTENSA || H8300
---help---
This is a driver for SMC's 91x series of Ethernet chipsets,
diff --git a/drivers/net/wireless/cisco/Kconfig b/drivers/net/wireless/cisco/Kconfig
index b22567dff893..8ed0b154bb33 100644
--- a/drivers/net/wireless/cisco/Kconfig
+++ b/drivers/net/wireless/cisco/Kconfig
@@ -33,7 +33,7 @@ config AIRO
config AIRO_CS
tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards"
- depends on CFG80211 && PCMCIA && (BROKEN || !M32R)
+ depends on CFG80211 && PCMCIA
select WIRELESS_EXT
select WEXT_SPY
select WEXT_PRIV
diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index 763ee50ea57d..f16aad3bf5d6 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -43,7 +43,7 @@ config PWM_AB8500
config PWM_ATMEL
tristate "Atmel PWM support"
- depends on ARCH_AT91 || AVR32
+ depends on ARCH_AT91
help
Generic PWM framework driver for Atmel SoC.
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index be5a3dc99c11..46af10ac45fc 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -868,7 +868,7 @@ comment "Platform RTC drivers"
config RTC_DRV_CMOS
tristate "PC-style 'CMOS'"
- depends on X86 || ARM || M32R || PPC || MIPS || SPARC64
+ depends on X86 || ARM || PPC || MIPS || SPARC64
default y if X86
select RTC_MC146818_LIB
help
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 603783976b81..103c13fcefa0 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -72,10 +72,10 @@ config SPI_ARMADA_3700
config SPI_ATMEL
tristate "Atmel SPI Controller"
depends on HAS_DMA
- depends on (ARCH_AT91 || AVR32 || COMPILE_TEST)
+ depends on ARCH_AT91 || COMPILE_TEST
help
This selects a driver for the Atmel SPI Controller, present on
- many AT32 (AVR32) and AT91 (ARM) chips.
+ many AT91 ARM chips.
config SPI_AU1550
tristate "Au1550/Au1200/Au1300 SPI Controller"
diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index 5506a9c03c1f..e757afc1cfd0 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -87,7 +87,7 @@ config USB_MUSB_DA8XX
config USB_MUSB_TUSB6010
tristate "TUSB6010"
depends on HAS_IOMEM
- depends on (ARCH_OMAP2PLUS || COMPILE_TEST) && !BLACKFIN
+ depends on ARCH_OMAP2PLUS || COMPILE_TEST
depends on NOP_USB_XCEIV = USB_MUSB_HDRC # both built-in or both modules
config USB_MUSB_OMAP2PLUS
diff --git a/drivers/video/console/Kconfig b/drivers/video/console/Kconfig
index 005ed87c8216..a9e398c144f8 100644
--- a/drivers/video/console/Kconfig
+++ b/drivers/video/console/Kconfig
@@ -6,8 +6,7 @@ menu "Console display driver support"
config VGA_CONSOLE
bool "VGA text console" if EXPERT || !X86
- depends on !4xx && !PPC_8xx && !SPARC && !M68K && !PARISC && !FRV && \
- !SUPERH && !BLACKFIN && !AVR32 && !CRIS && \
+ depends on !4xx && !PPC_8xx && !SPARC && !M68K && !PARISC && !SUPERH && \
(!ARM || ARCH_FOOTBRIDGE || ARCH_INTEGRATOR || ARCH_NETWINDER) && \
!ARM64 && !ARC && !MICROBLAZE && !OPENRISC
default y
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 0e19679348d1..79020ce95de2 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -828,10 +828,6 @@ config BFIN_WDT
To compile this driver as a module, choose M here: the
module will be called bfin_wdt.
-# CRIS Architecture
-
-# FRV Architecture
-
# X86 (i386 + ia64 + x86_64) Architecture
config ACQUIRE_WDT
@@ -1431,8 +1427,6 @@ config NIC7018_WDT
To compile this driver as a module, choose M here: the module will be
called nic7018_wdt.
-# M32R Architecture
-
# M68K Architecture
config M54xx_WATCHDOG
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 0474d38aa854..1f9a0235f22c 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -94,10 +94,6 @@ obj-$(CONFIG_SPRD_WATCHDOG) += sprd_wdt.o
# BLACKFIN Architecture
obj-$(CONFIG_BFIN_WDT) += bfin_wdt.o
-# CRIS Architecture
-
-# FRV Architecture
-
# X86 (i386 + ia64 + x86_64) Architecture
obj-$(CONFIG_ACQUIRE_WDT) += acquirewdt.o
obj-$(CONFIG_ADVANTECH_WDT) += advantechwdt.o
@@ -146,8 +142,6 @@ obj-$(CONFIG_INTEL_MEI_WDT) += mei_wdt.o
obj-$(CONFIG_NI903X_WDT) += ni903x_wdt.o
obj-$(CONFIG_NIC7018_WDT) += nic7018_wdt.o
-# M32R Architecture
-
# M68K Architecture
obj-$(CONFIG_M54xx_WATCHDOG) += m54xx_wdt.o
diff --git a/fs/Kconfig.binfmt b/fs/Kconfig.binfmt
index 58c2bbd385ad..57a27c42b5ac 100644
--- a/fs/Kconfig.binfmt
+++ b/fs/Kconfig.binfmt
@@ -1,6 +1,6 @@
config BINFMT_ELF
bool "Kernel support for ELF binaries"
- depends on MMU && (BROKEN || !FRV)
+ depends on MMU
select ELFCORE
default y
---help---
@@ -35,7 +35,7 @@ config ARCH_BINFMT_ELF_STATE
config BINFMT_ELF_FDPIC
bool "Kernel support for FDPIC ELF binaries"
default y if !BINFMT_ELF
- depends on (ARM || FRV || BLACKFIN || (SUPERH32 && !MMU) || C6X)
+ depends on (ARM || (SUPERH32 && !MMU) || C6X)
select ELFCORE
help
ELF FDPIC binaries are based on ELF, but allow the individual load
@@ -90,7 +90,6 @@ config BINFMT_SCRIPT
config BINFMT_FLAT
bool "Kernel support for flat binaries"
depends on !MMU || ARM || M68K
- depends on !FRV || BROKEN
help
Support uClinux FLAT format binaries.
diff --git a/fs/minix/Kconfig b/fs/minix/Kconfig
index f2a0cfcef11d..bcd53a79156f 100644
--- a/fs/minix/Kconfig
+++ b/fs/minix/Kconfig
@@ -18,7 +18,7 @@ config MINIX_FS
config MINIX_FS_NATIVE_ENDIAN
def_bool MINIX_FS
- depends on M32R || MICROBLAZE || MIPS || S390 || SUPERH || SPARC || XTENSA || (M68K && !MMU)
+ depends on MICROBLAZE || MIPS || S390 || SUPERH || SPARC || XTENSA || (M68K && !MMU)
config MINIX_FS_BIG_ENDIAN_16BIT_INDEXED
def_bool MINIX_FS
diff --git a/include/linux/ide.h b/include/linux/ide.h
index 20d42c0d9fb6..1d6f16110eae 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -25,15 +25,10 @@
#include <asm/byteorder.h>
#include <asm/io.h>
-#if defined(CONFIG_CRIS) || defined(CONFIG_FRV)
-# define SUPPORT_VLB_SYNC 0
-#else
-# define SUPPORT_VLB_SYNC 1
-#endif
-
/*
* Probably not wise to fiddle with these
*/
+#define SUPPORT_VLB_SYNC 1
#define IDE_DEFAULT_MAX_FAILURES 1
#define ERROR_MAX 8 /* Max read/write errors per sector */
#define ERROR_RESET 3 /* Reset controller every 4th retry */
diff --git a/init/Kconfig b/init/Kconfig
index a14bcc9724a2..2852692d7c9c 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -998,7 +998,6 @@ config RELAY
config BLK_DEV_INITRD
bool "Initial RAM filesystem and RAM disk (initramfs/initrd) support"
- depends on BROKEN || !FRV
help
The initial RAM filesystem is a ramfs which is loaded by the
boot loader (loadlin or lilo) and that is mounted as root
@@ -1108,7 +1107,7 @@ config MULTIUSER
config SGETMASK_SYSCALL
bool "sgetmask/ssetmask syscalls support" if EXPERT
- def_bool PARISC || BLACKFIN || M68K || PPC || MIPS || X86 || SPARC || CRIS || MICROBLAZE || SUPERH
+ def_bool PARISC || M68K || PPC || MIPS || X86 || SPARC || MICROBLAZE || SUPERH
---help---
sys_sgetmask and sys_ssetmask are obsolete system calls
no longer supported in libc but still enabled by default in some
@@ -1370,7 +1369,7 @@ config KALLSYMS_ABSOLUTE_PERCPU
config KALLSYMS_BASE_RELATIVE
bool
depends on KALLSYMS
- default !IA64 && !(TILE && 64BIT)
+ default !IA64
help
Instead of emitting them as absolute values in the native word size,
emit the symbol references in the kallsyms table as 32-bit entries,
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 41ac9d294245..6927c6d8d185 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -165,7 +165,7 @@ config DEBUG_INFO_REDUCED
config DEBUG_INFO_SPLIT
bool "Produce split debuginfo in .dwo files"
- depends on DEBUG_INFO && !FRV
+ depends on DEBUG_INFO
help
Generate debug info into separate .dwo files. This significantly
reduces the build directory size for builds with DEBUG_INFO,
@@ -354,10 +354,7 @@ config ARCH_WANT_FRAME_POINTERS
config FRAME_POINTER
bool "Compile the kernel with frame pointers"
- depends on DEBUG_KERNEL && \
- (CRIS || M68K || FRV || UML || \
- SUPERH || BLACKFIN) || \
- ARCH_WANT_FRAME_POINTERS
+ depends on DEBUG_KERNEL && (M68K || UML || SUPERH) || ARCH_WANT_FRAME_POINTERS
default y if (DEBUG_INFO && UML) || ARCH_WANT_FRAME_POINTERS
help
If you say Y here the resulting kernel image will be slightly
@@ -1138,7 +1135,7 @@ config LOCKDEP
bool
depends on DEBUG_KERNEL && TRACE_IRQFLAGS_SUPPORT && STACKTRACE_SUPPORT && LOCKDEP_SUPPORT
select STACKTRACE
- select FRAME_POINTER if !MIPS && !PPC && !ARM_UNWIND && !S390 && !MICROBLAZE && !ARC && !SCORE && !X86
+ select FRAME_POINTER if !MIPS && !PPC && !ARM_UNWIND && !S390 && !MICROBLAZE && !ARC && !X86
select KALLSYMS
select KALLSYMS_ALL
@@ -1571,7 +1568,7 @@ config FAULT_INJECTION_STACKTRACE_FILTER
depends on FAULT_INJECTION_DEBUG_FS && STACKTRACE_SUPPORT
depends on !X86_64
select STACKTRACE
- select FRAME_POINTER if !MIPS && !PPC && !S390 && !MICROBLAZE && !ARM_UNWIND && !ARC && !SCORE && !X86
+ select FRAME_POINTER if !MIPS && !PPC && !S390 && !MICROBLAZE && !ARM_UNWIND && !ARC && !X86
help
Provide stacktrace filter for fault-injection capabilities
@@ -1969,7 +1966,7 @@ config STRICT_DEVMEM
bool "Filter access to /dev/mem"
depends on MMU && DEVMEM
depends on ARCH_HAS_DEVMEM_IS_ALLOWED
- default y if TILE || PPC || X86 || ARM64
+ default y if PPC || X86 || ARM64
---help---
If this option is disabled, you allow userspace (root) access to all
of memory, including kernel and userspace memory. Accidental
diff --git a/lib/test_user_copy.c b/lib/test_user_copy.c
index a6556f3364d1..e161f0498f42 100644
--- a/lib/test_user_copy.c
+++ b/lib/test_user_copy.c
@@ -31,8 +31,6 @@
* their capability at compile-time, we just have to opt-out certain archs.
*/
#if BITS_PER_LONG == 64 || (!(defined(CONFIG_ARM) && !defined(MMU)) && \
- !defined(CONFIG_BLACKFIN) && \
- !defined(CONFIG_M32R) && \
!defined(CONFIG_M68K) && \
!defined(CONFIG_MICROBLAZE) && \
!defined(CONFIG_NIOS2) && \
diff --git a/mm/Kconfig b/mm/Kconfig
index abefa573bcd8..d5004d82a1d6 100644
--- a/mm/Kconfig
+++ b/mm/Kconfig
@@ -278,13 +278,6 @@ config BOUNCE
by default when ZONE_DMA or HIGHMEM is selected, but you
may say n to override this.
-# On the 'tile' arch, USB OHCI needs the bounce pool since tilegx will often
-# have more than 4GB of memory, but we don't currently use the IOTLB to present
-# a 32-bit address to OHCI. So we need to use a bounce pool instead.
-config NEED_BOUNCE_POOL
- bool
- default y if TILE && USB_OHCI_HCD
-
config NR_QUICK
int
depends on QUICKLIST
diff --git a/mm/percpu.c b/mm/percpu.c
index 50e7fdf84055..79e3549cab0f 100644
--- a/mm/percpu.c
+++ b/mm/percpu.c
@@ -2719,11 +2719,7 @@ void __init setup_per_cpu_areas(void)
if (pcpu_setup_first_chunk(ai, fc) < 0)
panic("Failed to initialize percpu areas.");
-#ifdef CONFIG_CRIS
-#warning "the CRIS architecture has physical and virtual addresses confused"
-#else
pcpu_free_alloc_info(ai);
-#endif
}
#endif /* CONFIG_SMP */
--
2.9.0
WARNING: multiple messages have this Message-ID (diff)
From: Arnd Bergmann <arnd@arndb.de>
To: linux-arch@vger.kernel.org
Cc: linux-rtc@vger.kernel.org, linux-pwm@vger.kernel.org,
linux-fbdev@vger.kernel.org, linux-watchdog@vger.kernel.org,
Arnd Bergmann <arnd@arndb.de>,
linux-mm@kvack.org, netdev@vger.kernel.org,
linux-usb@vger.kernel.org, linux-wireless@vger.kernel.org,
linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
linux-spi@vger.kernel.org, linux-block@vger.kernel.org,
linux-ide@vger.kernel.org, linux-input@vger.kernel.org,
linux-fsdevel@vger.kernel.org
Subject: [PATCH 11/16] treewide: simplify Kconfig dependencies for removed archs
Date: Wed, 14 Mar 2018 15:43:46 +0100 [thread overview]
Message-ID: <20180314144614.1632190-1-arnd@arndb.de> (raw)
In-Reply-To: <20180314143529.1456168-1-arnd@arndb.de>
A lot of Kconfig symbols have architecture specific dependencies.
In those cases that depend on architectures we have already removed,
they can be omitted.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
block/bounce.c | 2 +-
drivers/ide/Kconfig | 2 +-
drivers/ide/ide-generic.c | 12 +-----------
drivers/input/joystick/analog.c | 2 +-
drivers/isdn/hisax/Kconfig | 10 +++++-----
drivers/net/ethernet/davicom/Kconfig | 2 +-
drivers/net/ethernet/smsc/Kconfig | 6 +++---
drivers/net/wireless/cisco/Kconfig | 2 +-
drivers/pwm/Kconfig | 2 +-
drivers/rtc/Kconfig | 2 +-
drivers/spi/Kconfig | 4 ++--
drivers/usb/musb/Kconfig | 2 +-
drivers/video/console/Kconfig | 3 +--
drivers/watchdog/Kconfig | 6 ------
drivers/watchdog/Makefile | 6 ------
fs/Kconfig.binfmt | 5 ++---
fs/minix/Kconfig | 2 +-
include/linux/ide.h | 7 +------
init/Kconfig | 5 ++---
lib/Kconfig.debug | 13 +++++--------
lib/test_user_copy.c | 2 --
mm/Kconfig | 7 -------
mm/percpu.c | 4 ----
23 files changed, 31 insertions(+), 77 deletions(-)
diff --git a/block/bounce.c b/block/bounce.c
index 6a3e68292273..dd0b93f2a871 100644
--- a/block/bounce.c
+++ b/block/bounce.c
@@ -31,7 +31,7 @@
static struct bio_set *bounce_bio_set, *bounce_bio_split;
static mempool_t *page_pool, *isa_page_pool;
-#if defined(CONFIG_HIGHMEM) || defined(CONFIG_NEED_BOUNCE_POOL)
+#if defined(CONFIG_HIGHMEM)
static __init int init_emergency_pool(void)
{
#if defined(CONFIG_HIGHMEM) && !defined(CONFIG_MEMORY_HOTPLUG)
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index cf1fb3fb5d26..901b8833847f 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -200,7 +200,7 @@ comment "IDE chipset support/bugfixes"
config IDE_GENERIC
tristate "generic/default IDE chipset support"
- depends on ALPHA || X86 || IA64 || M32R || MIPS || ARCH_RPC
+ depends on ALPHA || X86 || IA64 || MIPS || ARCH_RPC
default ARM && ARCH_RPC
help
This is the generic IDE driver. This driver attaches to the
diff --git a/drivers/ide/ide-generic.c b/drivers/ide/ide-generic.c
index 54d7c4685d23..80c0d69b83ac 100644
--- a/drivers/ide/ide-generic.c
+++ b/drivers/ide/ide-generic.c
@@ -13,13 +13,10 @@
#include <linux/ide.h>
#include <linux/pci_ids.h>
-/* FIXME: convert arm and m32r to use ide_platform host driver */
+/* FIXME: convert arm to use ide_platform host driver */
#ifdef CONFIG_ARM
#include <asm/irq.h>
#endif
-#ifdef CONFIG_M32R
-#include <asm/m32r.h>
-#endif
#define DRV_NAME "ide_generic"
@@ -35,13 +32,6 @@ static const struct ide_port_info ide_generic_port_info = {
#ifdef CONFIG_ARM
static const u16 legacy_bases[] = { 0x1f0 };
static const int legacy_irqs[] = { IRQ_HARDDISK };
-#elif defined(CONFIG_PLAT_M32700UT) || defined(CONFIG_PLAT_MAPPI2) || \
- defined(CONFIG_PLAT_OPSPUT)
-static const u16 legacy_bases[] = { 0x1f0 };
-static const int legacy_irqs[] = { PLD_IRQ_CFIREQ };
-#elif defined(CONFIG_PLAT_MAPPI3)
-static const u16 legacy_bases[] = { 0x1f0, 0x170 };
-static const int legacy_irqs[] = { PLD_IRQ_CFIREQ, PLD_IRQ_IDEIREQ };
#elif defined(CONFIG_ALPHA)
static const u16 legacy_bases[] = { 0x1f0, 0x170, 0x1e8, 0x168 };
static const int legacy_irqs[] = { 14, 15, 11, 10 };
diff --git a/drivers/input/joystick/analog.c b/drivers/input/joystick/analog.c
index be1b4921f22a..eefac7978f93 100644
--- a/drivers/input/joystick/analog.c
+++ b/drivers/input/joystick/analog.c
@@ -163,7 +163,7 @@ static unsigned int get_time_pit(void)
#define GET_TIME(x) do { x = (unsigned int)rdtsc(); } while (0)
#define DELTA(x,y) ((y)-(x))
#define TIME_NAME "TSC"
-#elif defined(__alpha__) || defined(CONFIG_ARM) || defined(CONFIG_ARM64) || defined(CONFIG_RISCV) || defined(CONFIG_TILE)
+#elif defined(__alpha__) || defined(CONFIG_ARM) || defined(CONFIG_ARM64) || defined(CONFIG_RISCV)
#define GET_TIME(x) do { x = get_cycles(); } while (0)
#define DELTA(x,y) ((y)-(x))
#define TIME_NAME "get_cycles"
diff --git a/drivers/isdn/hisax/Kconfig b/drivers/isdn/hisax/Kconfig
index eb83d94ab4fe..38cfc8baae19 100644
--- a/drivers/isdn/hisax/Kconfig
+++ b/drivers/isdn/hisax/Kconfig
@@ -109,7 +109,7 @@ config HISAX_16_3
config HISAX_TELESPCI
bool "Teles PCI"
- depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV || (XTENSA && !CPU_LITTLE_ENDIAN)))
+ depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || (XTENSA && !CPU_LITTLE_ENDIAN)))
help
This enables HiSax support for the Teles PCI.
See <file:Documentation/isdn/README.HiSax> on how to configure it.
@@ -237,7 +237,7 @@ config HISAX_MIC
config HISAX_NETJET
bool "NETjet card"
- depends on PCI && (BROKEN || !(PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV || (XTENSA && !CPU_LITTLE_ENDIAN) || MICROBLAZE))
+ depends on PCI && (BROKEN || !(PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || (XTENSA && !CPU_LITTLE_ENDIAN) || MICROBLAZE))
depends on VIRT_TO_BUS
help
This enables HiSax support for the NetJet from Traverse
@@ -249,7 +249,7 @@ config HISAX_NETJET
config HISAX_NETJET_U
bool "NETspider U card"
- depends on PCI && (BROKEN || !(PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV || (XTENSA && !CPU_LITTLE_ENDIAN) || MICROBLAZE))
+ depends on PCI && (BROKEN || !(PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || (XTENSA && !CPU_LITTLE_ENDIAN) || MICROBLAZE))
depends on VIRT_TO_BUS
help
This enables HiSax support for the Netspider U interface ISDN card
@@ -318,7 +318,7 @@ config HISAX_GAZEL
config HISAX_HFC_PCI
bool "HFC PCI-Bus cards"
- depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV || (XTENSA && !CPU_LITTLE_ENDIAN)))
+ depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || (XTENSA && !CPU_LITTLE_ENDIAN)))
help
This enables HiSax support for the HFC-S PCI 2BDS0 based cards.
@@ -343,7 +343,7 @@ config HISAX_HFC_SX
config HISAX_ENTERNOW_PCI
bool "Formula-n enter:now PCI card"
- depends on HISAX_NETJET && PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV || (XTENSA && !CPU_LITTLE_ENDIAN)))
+ depends on HISAX_NETJET && PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || (XTENSA && !CPU_LITTLE_ENDIAN)))
help
This enables HiSax support for the Formula-n enter:now PCI
ISDN card.
diff --git a/drivers/net/ethernet/davicom/Kconfig b/drivers/net/ethernet/davicom/Kconfig
index 7ec2d74f94d3..680a6d983f37 100644
--- a/drivers/net/ethernet/davicom/Kconfig
+++ b/drivers/net/ethernet/davicom/Kconfig
@@ -4,7 +4,7 @@
config DM9000
tristate "DM9000 support"
- depends on ARM || BLACKFIN || MIPS || COLDFIRE || NIOS2
+ depends on ARM || MIPS || COLDFIRE || NIOS2
select CRC32
select MII
---help---
diff --git a/drivers/net/ethernet/smsc/Kconfig b/drivers/net/ethernet/smsc/Kconfig
index 948603e9b905..3da0c573d2ab 100644
--- a/drivers/net/ethernet/smsc/Kconfig
+++ b/drivers/net/ethernet/smsc/Kconfig
@@ -5,8 +5,8 @@
config NET_VENDOR_SMSC
bool "SMC (SMSC)/Western Digital devices"
default y
- depends on ARM || ARM64 || ATARI_ETHERNAT || BLACKFIN || COLDFIRE || \
- ISA || M32R || MAC || MIPS || NIOS2 || PCI || \
+ depends on ARM || ARM64 || ATARI_ETHERNAT || COLDFIRE || \
+ ISA || MAC || MIPS || NIOS2 || PCI || \
PCMCIA || SUPERH || XTENSA || H8300
---help---
If you have a network (Ethernet) card belonging to this class, say Y.
@@ -37,7 +37,7 @@ config SMC91X
select CRC32
select MII
depends on !OF || GPIOLIB
- depends on ARM || ARM64 || ATARI_ETHERNAT || BLACKFIN || COLDFIRE || \
+ depends on ARM || ARM64 || ATARI_ETHERNAT || COLDFIRE || \
M32R || MIPS || NIOS2 || SUPERH || XTENSA || H8300
---help---
This is a driver for SMC's 91x series of Ethernet chipsets,
diff --git a/drivers/net/wireless/cisco/Kconfig b/drivers/net/wireless/cisco/Kconfig
index b22567dff893..8ed0b154bb33 100644
--- a/drivers/net/wireless/cisco/Kconfig
+++ b/drivers/net/wireless/cisco/Kconfig
@@ -33,7 +33,7 @@ config AIRO
config AIRO_CS
tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards"
- depends on CFG80211 && PCMCIA && (BROKEN || !M32R)
+ depends on CFG80211 && PCMCIA
select WIRELESS_EXT
select WEXT_SPY
select WEXT_PRIV
diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index 763ee50ea57d..f16aad3bf5d6 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -43,7 +43,7 @@ config PWM_AB8500
config PWM_ATMEL
tristate "Atmel PWM support"
- depends on ARCH_AT91 || AVR32
+ depends on ARCH_AT91
help
Generic PWM framework driver for Atmel SoC.
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index be5a3dc99c11..46af10ac45fc 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -868,7 +868,7 @@ comment "Platform RTC drivers"
config RTC_DRV_CMOS
tristate "PC-style 'CMOS'"
- depends on X86 || ARM || M32R || PPC || MIPS || SPARC64
+ depends on X86 || ARM || PPC || MIPS || SPARC64
default y if X86
select RTC_MC146818_LIB
help
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 603783976b81..103c13fcefa0 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -72,10 +72,10 @@ config SPI_ARMADA_3700
config SPI_ATMEL
tristate "Atmel SPI Controller"
depends on HAS_DMA
- depends on (ARCH_AT91 || AVR32 || COMPILE_TEST)
+ depends on ARCH_AT91 || COMPILE_TEST
help
This selects a driver for the Atmel SPI Controller, present on
- many AT32 (AVR32) and AT91 (ARM) chips.
+ many AT91 ARM chips.
config SPI_AU1550
tristate "Au1550/Au1200/Au1300 SPI Controller"
diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index 5506a9c03c1f..e757afc1cfd0 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -87,7 +87,7 @@ config USB_MUSB_DA8XX
config USB_MUSB_TUSB6010
tristate "TUSB6010"
depends on HAS_IOMEM
- depends on (ARCH_OMAP2PLUS || COMPILE_TEST) && !BLACKFIN
+ depends on ARCH_OMAP2PLUS || COMPILE_TEST
depends on NOP_USB_XCEIV = USB_MUSB_HDRC # both built-in or both modules
config USB_MUSB_OMAP2PLUS
diff --git a/drivers/video/console/Kconfig b/drivers/video/console/Kconfig
index 005ed87c8216..a9e398c144f8 100644
--- a/drivers/video/console/Kconfig
+++ b/drivers/video/console/Kconfig
@@ -6,8 +6,7 @@ menu "Console display driver support"
config VGA_CONSOLE
bool "VGA text console" if EXPERT || !X86
- depends on !4xx && !PPC_8xx && !SPARC && !M68K && !PARISC && !FRV && \
- !SUPERH && !BLACKFIN && !AVR32 && !CRIS && \
+ depends on !4xx && !PPC_8xx && !SPARC && !M68K && !PARISC && !SUPERH && \
(!ARM || ARCH_FOOTBRIDGE || ARCH_INTEGRATOR || ARCH_NETWINDER) && \
!ARM64 && !ARC && !MICROBLAZE && !OPENRISC
default y
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 0e19679348d1..79020ce95de2 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -828,10 +828,6 @@ config BFIN_WDT
To compile this driver as a module, choose M here: the
module will be called bfin_wdt.
-# CRIS Architecture
-
-# FRV Architecture
-
# X86 (i386 + ia64 + x86_64) Architecture
config ACQUIRE_WDT
@@ -1431,8 +1427,6 @@ config NIC7018_WDT
To compile this driver as a module, choose M here: the module will be
called nic7018_wdt.
-# M32R Architecture
-
# M68K Architecture
config M54xx_WATCHDOG
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 0474d38aa854..1f9a0235f22c 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -94,10 +94,6 @@ obj-$(CONFIG_SPRD_WATCHDOG) += sprd_wdt.o
# BLACKFIN Architecture
obj-$(CONFIG_BFIN_WDT) += bfin_wdt.o
-# CRIS Architecture
-
-# FRV Architecture
-
# X86 (i386 + ia64 + x86_64) Architecture
obj-$(CONFIG_ACQUIRE_WDT) += acquirewdt.o
obj-$(CONFIG_ADVANTECH_WDT) += advantechwdt.o
@@ -146,8 +142,6 @@ obj-$(CONFIG_INTEL_MEI_WDT) += mei_wdt.o
obj-$(CONFIG_NI903X_WDT) += ni903x_wdt.o
obj-$(CONFIG_NIC7018_WDT) += nic7018_wdt.o
-# M32R Architecture
-
# M68K Architecture
obj-$(CONFIG_M54xx_WATCHDOG) += m54xx_wdt.o
diff --git a/fs/Kconfig.binfmt b/fs/Kconfig.binfmt
index 58c2bbd385ad..57a27c42b5ac 100644
--- a/fs/Kconfig.binfmt
+++ b/fs/Kconfig.binfmt
@@ -1,6 +1,6 @@
config BINFMT_ELF
bool "Kernel support for ELF binaries"
- depends on MMU && (BROKEN || !FRV)
+ depends on MMU
select ELFCORE
default y
---help---
@@ -35,7 +35,7 @@ config ARCH_BINFMT_ELF_STATE
config BINFMT_ELF_FDPIC
bool "Kernel support for FDPIC ELF binaries"
default y if !BINFMT_ELF
- depends on (ARM || FRV || BLACKFIN || (SUPERH32 && !MMU) || C6X)
+ depends on (ARM || (SUPERH32 && !MMU) || C6X)
select ELFCORE
help
ELF FDPIC binaries are based on ELF, but allow the individual load
@@ -90,7 +90,6 @@ config BINFMT_SCRIPT
config BINFMT_FLAT
bool "Kernel support for flat binaries"
depends on !MMU || ARM || M68K
- depends on !FRV || BROKEN
help
Support uClinux FLAT format binaries.
diff --git a/fs/minix/Kconfig b/fs/minix/Kconfig
index f2a0cfcef11d..bcd53a79156f 100644
--- a/fs/minix/Kconfig
+++ b/fs/minix/Kconfig
@@ -18,7 +18,7 @@ config MINIX_FS
config MINIX_FS_NATIVE_ENDIAN
def_bool MINIX_FS
- depends on M32R || MICROBLAZE || MIPS || S390 || SUPERH || SPARC || XTENSA || (M68K && !MMU)
+ depends on MICROBLAZE || MIPS || S390 || SUPERH || SPARC || XTENSA || (M68K && !MMU)
config MINIX_FS_BIG_ENDIAN_16BIT_INDEXED
def_bool MINIX_FS
diff --git a/include/linux/ide.h b/include/linux/ide.h
index 20d42c0d9fb6..1d6f16110eae 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -25,15 +25,10 @@
#include <asm/byteorder.h>
#include <asm/io.h>
-#if defined(CONFIG_CRIS) || defined(CONFIG_FRV)
-# define SUPPORT_VLB_SYNC 0
-#else
-# define SUPPORT_VLB_SYNC 1
-#endif
-
/*
* Probably not wise to fiddle with these
*/
+#define SUPPORT_VLB_SYNC 1
#define IDE_DEFAULT_MAX_FAILURES 1
#define ERROR_MAX 8 /* Max read/write errors per sector */
#define ERROR_RESET 3 /* Reset controller every 4th retry */
diff --git a/init/Kconfig b/init/Kconfig
index a14bcc9724a2..2852692d7c9c 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -998,7 +998,6 @@ config RELAY
config BLK_DEV_INITRD
bool "Initial RAM filesystem and RAM disk (initramfs/initrd) support"
- depends on BROKEN || !FRV
help
The initial RAM filesystem is a ramfs which is loaded by the
boot loader (loadlin or lilo) and that is mounted as root
@@ -1108,7 +1107,7 @@ config MULTIUSER
config SGETMASK_SYSCALL
bool "sgetmask/ssetmask syscalls support" if EXPERT
- def_bool PARISC || BLACKFIN || M68K || PPC || MIPS || X86 || SPARC || CRIS || MICROBLAZE || SUPERH
+ def_bool PARISC || M68K || PPC || MIPS || X86 || SPARC || MICROBLAZE || SUPERH
---help---
sys_sgetmask and sys_ssetmask are obsolete system calls
no longer supported in libc but still enabled by default in some
@@ -1370,7 +1369,7 @@ config KALLSYMS_ABSOLUTE_PERCPU
config KALLSYMS_BASE_RELATIVE
bool
depends on KALLSYMS
- default !IA64 && !(TILE && 64BIT)
+ default !IA64
help
Instead of emitting them as absolute values in the native word size,
emit the symbol references in the kallsyms table as 32-bit entries,
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 41ac9d294245..6927c6d8d185 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -165,7 +165,7 @@ config DEBUG_INFO_REDUCED
config DEBUG_INFO_SPLIT
bool "Produce split debuginfo in .dwo files"
- depends on DEBUG_INFO && !FRV
+ depends on DEBUG_INFO
help
Generate debug info into separate .dwo files. This significantly
reduces the build directory size for builds with DEBUG_INFO,
@@ -354,10 +354,7 @@ config ARCH_WANT_FRAME_POINTERS
config FRAME_POINTER
bool "Compile the kernel with frame pointers"
- depends on DEBUG_KERNEL && \
- (CRIS || M68K || FRV || UML || \
- SUPERH || BLACKFIN) || \
- ARCH_WANT_FRAME_POINTERS
+ depends on DEBUG_KERNEL && (M68K || UML || SUPERH) || ARCH_WANT_FRAME_POINTERS
default y if (DEBUG_INFO && UML) || ARCH_WANT_FRAME_POINTERS
help
If you say Y here the resulting kernel image will be slightly
@@ -1138,7 +1135,7 @@ config LOCKDEP
bool
depends on DEBUG_KERNEL && TRACE_IRQFLAGS_SUPPORT && STACKTRACE_SUPPORT && LOCKDEP_SUPPORT
select STACKTRACE
- select FRAME_POINTER if !MIPS && !PPC && !ARM_UNWIND && !S390 && !MICROBLAZE && !ARC && !SCORE && !X86
+ select FRAME_POINTER if !MIPS && !PPC && !ARM_UNWIND && !S390 && !MICROBLAZE && !ARC && !X86
select KALLSYMS
select KALLSYMS_ALL
@@ -1571,7 +1568,7 @@ config FAULT_INJECTION_STACKTRACE_FILTER
depends on FAULT_INJECTION_DEBUG_FS && STACKTRACE_SUPPORT
depends on !X86_64
select STACKTRACE
- select FRAME_POINTER if !MIPS && !PPC && !S390 && !MICROBLAZE && !ARM_UNWIND && !ARC && !SCORE && !X86
+ select FRAME_POINTER if !MIPS && !PPC && !S390 && !MICROBLAZE && !ARM_UNWIND && !ARC && !X86
help
Provide stacktrace filter for fault-injection capabilities
@@ -1969,7 +1966,7 @@ config STRICT_DEVMEM
bool "Filter access to /dev/mem"
depends on MMU && DEVMEM
depends on ARCH_HAS_DEVMEM_IS_ALLOWED
- default y if TILE || PPC || X86 || ARM64
+ default y if PPC || X86 || ARM64
---help---
If this option is disabled, you allow userspace (root) access to all
of memory, including kernel and userspace memory. Accidental
diff --git a/lib/test_user_copy.c b/lib/test_user_copy.c
index a6556f3364d1..e161f0498f42 100644
--- a/lib/test_user_copy.c
+++ b/lib/test_user_copy.c
@@ -31,8 +31,6 @@
* their capability at compile-time, we just have to opt-out certain archs.
*/
#if BITS_PER_LONG == 64 || (!(defined(CONFIG_ARM) && !defined(MMU)) && \
- !defined(CONFIG_BLACKFIN) && \
- !defined(CONFIG_M32R) && \
!defined(CONFIG_M68K) && \
!defined(CONFIG_MICROBLAZE) && \
!defined(CONFIG_NIOS2) && \
diff --git a/mm/Kconfig b/mm/Kconfig
index abefa573bcd8..d5004d82a1d6 100644
--- a/mm/Kconfig
+++ b/mm/Kconfig
@@ -278,13 +278,6 @@ config BOUNCE
by default when ZONE_DMA or HIGHMEM is selected, but you
may say n to override this.
-# On the 'tile' arch, USB OHCI needs the bounce pool since tilegx will often
-# have more than 4GB of memory, but we don't currently use the IOTLB to present
-# a 32-bit address to OHCI. So we need to use a bounce pool instead.
-config NEED_BOUNCE_POOL
- bool
- default y if TILE && USB_OHCI_HCD
-
config NR_QUICK
int
depends on QUICKLIST
diff --git a/mm/percpu.c b/mm/percpu.c
index 50e7fdf84055..79e3549cab0f 100644
--- a/mm/percpu.c
+++ b/mm/percpu.c
@@ -2719,11 +2719,7 @@ void __init setup_per_cpu_areas(void)
if (pcpu_setup_first_chunk(ai, fc) < 0)
panic("Failed to initialize percpu areas.");
-#ifdef CONFIG_CRIS
-#warning "the CRIS architecture has physical and virtual addresses confused"
-#else
pcpu_free_alloc_info(ai);
-#endif
}
#endif /* CONFIG_SMP */
--
2.9.0
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
WARNING: multiple messages have this Message-ID (diff)
From: Arnd Bergmann <arnd@arndb.de>
To: linux-arch@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, Arnd Bergmann <arnd@arndb.de>,
linux-block@vger.kernel.org, linux-ide@vger.kernel.org,
linux-input@vger.kernel.org, netdev@vger.kernel.org,
linux-wireless@vger.kernel.org, linux-pwm@vger.kernel.org,
linux-rtc@vger.kernel.org, linux-spi@vger.kernel.org,
linux-usb@vger.kernel.org, dri-devel@lists.freedesktop.org,
linux-fbdev@vger.kernel.org, linux-watchdog@vger.kernel.org,
linux-fsdevel@vger.kernel.org, linux-mm@kvack.org
Subject: [11/16] treewide: simplify Kconfig dependencies for removed archs
Date: Wed, 14 Mar 2018 15:43:46 +0100 [thread overview]
Message-ID: <20180314144614.1632190-1-arnd@arndb.de> (raw)
A lot of Kconfig symbols have architecture specific dependencies.
In those cases that depend on architectures we have already removed,
they can be omitted.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
block/bounce.c | 2 +-
drivers/ide/Kconfig | 2 +-
drivers/ide/ide-generic.c | 12 +-----------
drivers/input/joystick/analog.c | 2 +-
drivers/isdn/hisax/Kconfig | 10 +++++-----
drivers/net/ethernet/davicom/Kconfig | 2 +-
drivers/net/ethernet/smsc/Kconfig | 6 +++---
drivers/net/wireless/cisco/Kconfig | 2 +-
drivers/pwm/Kconfig | 2 +-
drivers/rtc/Kconfig | 2 +-
drivers/spi/Kconfig | 4 ++--
drivers/usb/musb/Kconfig | 2 +-
drivers/video/console/Kconfig | 3 +--
drivers/watchdog/Kconfig | 6 ------
drivers/watchdog/Makefile | 6 ------
fs/Kconfig.binfmt | 5 ++---
fs/minix/Kconfig | 2 +-
include/linux/ide.h | 7 +------
init/Kconfig | 5 ++---
lib/Kconfig.debug | 13 +++++--------
lib/test_user_copy.c | 2 --
mm/Kconfig | 7 -------
mm/percpu.c | 4 ----
23 files changed, 31 insertions(+), 77 deletions(-)
diff --git a/block/bounce.c b/block/bounce.c
index 6a3e68292273..dd0b93f2a871 100644
--- a/block/bounce.c
+++ b/block/bounce.c
@@ -31,7 +31,7 @@
static struct bio_set *bounce_bio_set, *bounce_bio_split;
static mempool_t *page_pool, *isa_page_pool;
-#if defined(CONFIG_HIGHMEM) || defined(CONFIG_NEED_BOUNCE_POOL)
+#if defined(CONFIG_HIGHMEM)
static __init int init_emergency_pool(void)
{
#if defined(CONFIG_HIGHMEM) && !defined(CONFIG_MEMORY_HOTPLUG)
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index cf1fb3fb5d26..901b8833847f 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -200,7 +200,7 @@ comment "IDE chipset support/bugfixes"
config IDE_GENERIC
tristate "generic/default IDE chipset support"
- depends on ALPHA || X86 || IA64 || M32R || MIPS || ARCH_RPC
+ depends on ALPHA || X86 || IA64 || MIPS || ARCH_RPC
default ARM && ARCH_RPC
help
This is the generic IDE driver. This driver attaches to the
diff --git a/drivers/ide/ide-generic.c b/drivers/ide/ide-generic.c
index 54d7c4685d23..80c0d69b83ac 100644
--- a/drivers/ide/ide-generic.c
+++ b/drivers/ide/ide-generic.c
@@ -13,13 +13,10 @@
#include <linux/ide.h>
#include <linux/pci_ids.h>
-/* FIXME: convert arm and m32r to use ide_platform host driver */
+/* FIXME: convert arm to use ide_platform host driver */
#ifdef CONFIG_ARM
#include <asm/irq.h>
#endif
-#ifdef CONFIG_M32R
-#include <asm/m32r.h>
-#endif
#define DRV_NAME "ide_generic"
@@ -35,13 +32,6 @@ static const struct ide_port_info ide_generic_port_info = {
#ifdef CONFIG_ARM
static const u16 legacy_bases[] = { 0x1f0 };
static const int legacy_irqs[] = { IRQ_HARDDISK };
-#elif defined(CONFIG_PLAT_M32700UT) || defined(CONFIG_PLAT_MAPPI2) || \
- defined(CONFIG_PLAT_OPSPUT)
-static const u16 legacy_bases[] = { 0x1f0 };
-static const int legacy_irqs[] = { PLD_IRQ_CFIREQ };
-#elif defined(CONFIG_PLAT_MAPPI3)
-static const u16 legacy_bases[] = { 0x1f0, 0x170 };
-static const int legacy_irqs[] = { PLD_IRQ_CFIREQ, PLD_IRQ_IDEIREQ };
#elif defined(CONFIG_ALPHA)
static const u16 legacy_bases[] = { 0x1f0, 0x170, 0x1e8, 0x168 };
static const int legacy_irqs[] = { 14, 15, 11, 10 };
diff --git a/drivers/input/joystick/analog.c b/drivers/input/joystick/analog.c
index be1b4921f22a..eefac7978f93 100644
--- a/drivers/input/joystick/analog.c
+++ b/drivers/input/joystick/analog.c
@@ -163,7 +163,7 @@ static unsigned int get_time_pit(void)
#define GET_TIME(x) do { x = (unsigned int)rdtsc(); } while (0)
#define DELTA(x,y) ((y)-(x))
#define TIME_NAME "TSC"
-#elif defined(__alpha__) || defined(CONFIG_ARM) || defined(CONFIG_ARM64) || defined(CONFIG_RISCV) || defined(CONFIG_TILE)
+#elif defined(__alpha__) || defined(CONFIG_ARM) || defined(CONFIG_ARM64) || defined(CONFIG_RISCV)
#define GET_TIME(x) do { x = get_cycles(); } while (0)
#define DELTA(x,y) ((y)-(x))
#define TIME_NAME "get_cycles"
diff --git a/drivers/isdn/hisax/Kconfig b/drivers/isdn/hisax/Kconfig
index eb83d94ab4fe..38cfc8baae19 100644
--- a/drivers/isdn/hisax/Kconfig
+++ b/drivers/isdn/hisax/Kconfig
@@ -109,7 +109,7 @@ config HISAX_16_3
config HISAX_TELESPCI
bool "Teles PCI"
- depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV || (XTENSA && !CPU_LITTLE_ENDIAN)))
+ depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || (XTENSA && !CPU_LITTLE_ENDIAN)))
help
This enables HiSax support for the Teles PCI.
See <file:Documentation/isdn/README.HiSax> on how to configure it.
@@ -237,7 +237,7 @@ config HISAX_MIC
config HISAX_NETJET
bool "NETjet card"
- depends on PCI && (BROKEN || !(PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV || (XTENSA && !CPU_LITTLE_ENDIAN) || MICROBLAZE))
+ depends on PCI && (BROKEN || !(PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || (XTENSA && !CPU_LITTLE_ENDIAN) || MICROBLAZE))
depends on VIRT_TO_BUS
help
This enables HiSax support for the NetJet from Traverse
@@ -249,7 +249,7 @@ config HISAX_NETJET
config HISAX_NETJET_U
bool "NETspider U card"
- depends on PCI && (BROKEN || !(PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV || (XTENSA && !CPU_LITTLE_ENDIAN) || MICROBLAZE))
+ depends on PCI && (BROKEN || !(PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || (XTENSA && !CPU_LITTLE_ENDIAN) || MICROBLAZE))
depends on VIRT_TO_BUS
help
This enables HiSax support for the Netspider U interface ISDN card
@@ -318,7 +318,7 @@ config HISAX_GAZEL
config HISAX_HFC_PCI
bool "HFC PCI-Bus cards"
- depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV || (XTENSA && !CPU_LITTLE_ENDIAN)))
+ depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || (XTENSA && !CPU_LITTLE_ENDIAN)))
help
This enables HiSax support for the HFC-S PCI 2BDS0 based cards.
@@ -343,7 +343,7 @@ config HISAX_HFC_SX
config HISAX_ENTERNOW_PCI
bool "Formula-n enter:now PCI card"
- depends on HISAX_NETJET && PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV || (XTENSA && !CPU_LITTLE_ENDIAN)))
+ depends on HISAX_NETJET && PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || (XTENSA && !CPU_LITTLE_ENDIAN)))
help
This enables HiSax support for the Formula-n enter:now PCI
ISDN card.
diff --git a/drivers/net/ethernet/davicom/Kconfig b/drivers/net/ethernet/davicom/Kconfig
index 7ec2d74f94d3..680a6d983f37 100644
--- a/drivers/net/ethernet/davicom/Kconfig
+++ b/drivers/net/ethernet/davicom/Kconfig
@@ -4,7 +4,7 @@
config DM9000
tristate "DM9000 support"
- depends on ARM || BLACKFIN || MIPS || COLDFIRE || NIOS2
+ depends on ARM || MIPS || COLDFIRE || NIOS2
select CRC32
select MII
---help---
diff --git a/drivers/net/ethernet/smsc/Kconfig b/drivers/net/ethernet/smsc/Kconfig
index 948603e9b905..3da0c573d2ab 100644
--- a/drivers/net/ethernet/smsc/Kconfig
+++ b/drivers/net/ethernet/smsc/Kconfig
@@ -5,8 +5,8 @@
config NET_VENDOR_SMSC
bool "SMC (SMSC)/Western Digital devices"
default y
- depends on ARM || ARM64 || ATARI_ETHERNAT || BLACKFIN || COLDFIRE || \
- ISA || M32R || MAC || MIPS || NIOS2 || PCI || \
+ depends on ARM || ARM64 || ATARI_ETHERNAT || COLDFIRE || \
+ ISA || MAC || MIPS || NIOS2 || PCI || \
PCMCIA || SUPERH || XTENSA || H8300
---help---
If you have a network (Ethernet) card belonging to this class, say Y.
@@ -37,7 +37,7 @@ config SMC91X
select CRC32
select MII
depends on !OF || GPIOLIB
- depends on ARM || ARM64 || ATARI_ETHERNAT || BLACKFIN || COLDFIRE || \
+ depends on ARM || ARM64 || ATARI_ETHERNAT || COLDFIRE || \
M32R || MIPS || NIOS2 || SUPERH || XTENSA || H8300
---help---
This is a driver for SMC's 91x series of Ethernet chipsets,
diff --git a/drivers/net/wireless/cisco/Kconfig b/drivers/net/wireless/cisco/Kconfig
index b22567dff893..8ed0b154bb33 100644
--- a/drivers/net/wireless/cisco/Kconfig
+++ b/drivers/net/wireless/cisco/Kconfig
@@ -33,7 +33,7 @@ config AIRO
config AIRO_CS
tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards"
- depends on CFG80211 && PCMCIA && (BROKEN || !M32R)
+ depends on CFG80211 && PCMCIA
select WIRELESS_EXT
select WEXT_SPY
select WEXT_PRIV
diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index 763ee50ea57d..f16aad3bf5d6 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -43,7 +43,7 @@ config PWM_AB8500
config PWM_ATMEL
tristate "Atmel PWM support"
- depends on ARCH_AT91 || AVR32
+ depends on ARCH_AT91
help
Generic PWM framework driver for Atmel SoC.
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index be5a3dc99c11..46af10ac45fc 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -868,7 +868,7 @@ comment "Platform RTC drivers"
config RTC_DRV_CMOS
tristate "PC-style 'CMOS'"
- depends on X86 || ARM || M32R || PPC || MIPS || SPARC64
+ depends on X86 || ARM || PPC || MIPS || SPARC64
default y if X86
select RTC_MC146818_LIB
help
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 603783976b81..103c13fcefa0 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -72,10 +72,10 @@ config SPI_ARMADA_3700
config SPI_ATMEL
tristate "Atmel SPI Controller"
depends on HAS_DMA
- depends on (ARCH_AT91 || AVR32 || COMPILE_TEST)
+ depends on ARCH_AT91 || COMPILE_TEST
help
This selects a driver for the Atmel SPI Controller, present on
- many AT32 (AVR32) and AT91 (ARM) chips.
+ many AT91 ARM chips.
config SPI_AU1550
tristate "Au1550/Au1200/Au1300 SPI Controller"
diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index 5506a9c03c1f..e757afc1cfd0 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -87,7 +87,7 @@ config USB_MUSB_DA8XX
config USB_MUSB_TUSB6010
tristate "TUSB6010"
depends on HAS_IOMEM
- depends on (ARCH_OMAP2PLUS || COMPILE_TEST) && !BLACKFIN
+ depends on ARCH_OMAP2PLUS || COMPILE_TEST
depends on NOP_USB_XCEIV = USB_MUSB_HDRC # both built-in or both modules
config USB_MUSB_OMAP2PLUS
diff --git a/drivers/video/console/Kconfig b/drivers/video/console/Kconfig
index 005ed87c8216..a9e398c144f8 100644
--- a/drivers/video/console/Kconfig
+++ b/drivers/video/console/Kconfig
@@ -6,8 +6,7 @@ menu "Console display driver support"
config VGA_CONSOLE
bool "VGA text console" if EXPERT || !X86
- depends on !4xx && !PPC_8xx && !SPARC && !M68K && !PARISC && !FRV && \
- !SUPERH && !BLACKFIN && !AVR32 && !CRIS && \
+ depends on !4xx && !PPC_8xx && !SPARC && !M68K && !PARISC && !SUPERH && \
(!ARM || ARCH_FOOTBRIDGE || ARCH_INTEGRATOR || ARCH_NETWINDER) && \
!ARM64 && !ARC && !MICROBLAZE && !OPENRISC
default y
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 0e19679348d1..79020ce95de2 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -828,10 +828,6 @@ config BFIN_WDT
To compile this driver as a module, choose M here: the
module will be called bfin_wdt.
-# CRIS Architecture
-
-# FRV Architecture
-
# X86 (i386 + ia64 + x86_64) Architecture
config ACQUIRE_WDT
@@ -1431,8 +1427,6 @@ config NIC7018_WDT
To compile this driver as a module, choose M here: the module will be
called nic7018_wdt.
-# M32R Architecture
-
# M68K Architecture
config M54xx_WATCHDOG
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 0474d38aa854..1f9a0235f22c 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -94,10 +94,6 @@ obj-$(CONFIG_SPRD_WATCHDOG) += sprd_wdt.o
# BLACKFIN Architecture
obj-$(CONFIG_BFIN_WDT) += bfin_wdt.o
-# CRIS Architecture
-
-# FRV Architecture
-
# X86 (i386 + ia64 + x86_64) Architecture
obj-$(CONFIG_ACQUIRE_WDT) += acquirewdt.o
obj-$(CONFIG_ADVANTECH_WDT) += advantechwdt.o
@@ -146,8 +142,6 @@ obj-$(CONFIG_INTEL_MEI_WDT) += mei_wdt.o
obj-$(CONFIG_NI903X_WDT) += ni903x_wdt.o
obj-$(CONFIG_NIC7018_WDT) += nic7018_wdt.o
-# M32R Architecture
-
# M68K Architecture
obj-$(CONFIG_M54xx_WATCHDOG) += m54xx_wdt.o
diff --git a/fs/Kconfig.binfmt b/fs/Kconfig.binfmt
index 58c2bbd385ad..57a27c42b5ac 100644
--- a/fs/Kconfig.binfmt
+++ b/fs/Kconfig.binfmt
@@ -1,6 +1,6 @@
config BINFMT_ELF
bool "Kernel support for ELF binaries"
- depends on MMU && (BROKEN || !FRV)
+ depends on MMU
select ELFCORE
default y
---help---
@@ -35,7 +35,7 @@ config ARCH_BINFMT_ELF_STATE
config BINFMT_ELF_FDPIC
bool "Kernel support for FDPIC ELF binaries"
default y if !BINFMT_ELF
- depends on (ARM || FRV || BLACKFIN || (SUPERH32 && !MMU) || C6X)
+ depends on (ARM || (SUPERH32 && !MMU) || C6X)
select ELFCORE
help
ELF FDPIC binaries are based on ELF, but allow the individual load
@@ -90,7 +90,6 @@ config BINFMT_SCRIPT
config BINFMT_FLAT
bool "Kernel support for flat binaries"
depends on !MMU || ARM || M68K
- depends on !FRV || BROKEN
help
Support uClinux FLAT format binaries.
diff --git a/fs/minix/Kconfig b/fs/minix/Kconfig
index f2a0cfcef11d..bcd53a79156f 100644
--- a/fs/minix/Kconfig
+++ b/fs/minix/Kconfig
@@ -18,7 +18,7 @@ config MINIX_FS
config MINIX_FS_NATIVE_ENDIAN
def_bool MINIX_FS
- depends on M32R || MICROBLAZE || MIPS || S390 || SUPERH || SPARC || XTENSA || (M68K && !MMU)
+ depends on MICROBLAZE || MIPS || S390 || SUPERH || SPARC || XTENSA || (M68K && !MMU)
config MINIX_FS_BIG_ENDIAN_16BIT_INDEXED
def_bool MINIX_FS
diff --git a/include/linux/ide.h b/include/linux/ide.h
index 20d42c0d9fb6..1d6f16110eae 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -25,15 +25,10 @@
#include <asm/byteorder.h>
#include <asm/io.h>
-#if defined(CONFIG_CRIS) || defined(CONFIG_FRV)
-# define SUPPORT_VLB_SYNC 0
-#else
-# define SUPPORT_VLB_SYNC 1
-#endif
-
/*
* Probably not wise to fiddle with these
*/
+#define SUPPORT_VLB_SYNC 1
#define IDE_DEFAULT_MAX_FAILURES 1
#define ERROR_MAX 8 /* Max read/write errors per sector */
#define ERROR_RESET 3 /* Reset controller every 4th retry */
diff --git a/init/Kconfig b/init/Kconfig
index a14bcc9724a2..2852692d7c9c 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -998,7 +998,6 @@ config RELAY
config BLK_DEV_INITRD
bool "Initial RAM filesystem and RAM disk (initramfs/initrd) support"
- depends on BROKEN || !FRV
help
The initial RAM filesystem is a ramfs which is loaded by the
boot loader (loadlin or lilo) and that is mounted as root
@@ -1108,7 +1107,7 @@ config MULTIUSER
config SGETMASK_SYSCALL
bool "sgetmask/ssetmask syscalls support" if EXPERT
- def_bool PARISC || BLACKFIN || M68K || PPC || MIPS || X86 || SPARC || CRIS || MICROBLAZE || SUPERH
+ def_bool PARISC || M68K || PPC || MIPS || X86 || SPARC || MICROBLAZE || SUPERH
---help---
sys_sgetmask and sys_ssetmask are obsolete system calls
no longer supported in libc but still enabled by default in some
@@ -1370,7 +1369,7 @@ config KALLSYMS_ABSOLUTE_PERCPU
config KALLSYMS_BASE_RELATIVE
bool
depends on KALLSYMS
- default !IA64 && !(TILE && 64BIT)
+ default !IA64
help
Instead of emitting them as absolute values in the native word size,
emit the symbol references in the kallsyms table as 32-bit entries,
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 41ac9d294245..6927c6d8d185 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -165,7 +165,7 @@ config DEBUG_INFO_REDUCED
config DEBUG_INFO_SPLIT
bool "Produce split debuginfo in .dwo files"
- depends on DEBUG_INFO && !FRV
+ depends on DEBUG_INFO
help
Generate debug info into separate .dwo files. This significantly
reduces the build directory size for builds with DEBUG_INFO,
@@ -354,10 +354,7 @@ config ARCH_WANT_FRAME_POINTERS
config FRAME_POINTER
bool "Compile the kernel with frame pointers"
- depends on DEBUG_KERNEL && \
- (CRIS || M68K || FRV || UML || \
- SUPERH || BLACKFIN) || \
- ARCH_WANT_FRAME_POINTERS
+ depends on DEBUG_KERNEL && (M68K || UML || SUPERH) || ARCH_WANT_FRAME_POINTERS
default y if (DEBUG_INFO && UML) || ARCH_WANT_FRAME_POINTERS
help
If you say Y here the resulting kernel image will be slightly
@@ -1138,7 +1135,7 @@ config LOCKDEP
bool
depends on DEBUG_KERNEL && TRACE_IRQFLAGS_SUPPORT && STACKTRACE_SUPPORT && LOCKDEP_SUPPORT
select STACKTRACE
- select FRAME_POINTER if !MIPS && !PPC && !ARM_UNWIND && !S390 && !MICROBLAZE && !ARC && !SCORE && !X86
+ select FRAME_POINTER if !MIPS && !PPC && !ARM_UNWIND && !S390 && !MICROBLAZE && !ARC && !X86
select KALLSYMS
select KALLSYMS_ALL
@@ -1571,7 +1568,7 @@ config FAULT_INJECTION_STACKTRACE_FILTER
depends on FAULT_INJECTION_DEBUG_FS && STACKTRACE_SUPPORT
depends on !X86_64
select STACKTRACE
- select FRAME_POINTER if !MIPS && !PPC && !S390 && !MICROBLAZE && !ARM_UNWIND && !ARC && !SCORE && !X86
+ select FRAME_POINTER if !MIPS && !PPC && !S390 && !MICROBLAZE && !ARM_UNWIND && !ARC && !X86
help
Provide stacktrace filter for fault-injection capabilities
@@ -1969,7 +1966,7 @@ config STRICT_DEVMEM
bool "Filter access to /dev/mem"
depends on MMU && DEVMEM
depends on ARCH_HAS_DEVMEM_IS_ALLOWED
- default y if TILE || PPC || X86 || ARM64
+ default y if PPC || X86 || ARM64
---help---
If this option is disabled, you allow userspace (root) access to all
of memory, including kernel and userspace memory. Accidental
diff --git a/lib/test_user_copy.c b/lib/test_user_copy.c
index a6556f3364d1..e161f0498f42 100644
--- a/lib/test_user_copy.c
+++ b/lib/test_user_copy.c
@@ -31,8 +31,6 @@
* their capability at compile-time, we just have to opt-out certain archs.
*/
#if BITS_PER_LONG == 64 || (!(defined(CONFIG_ARM) && !defined(MMU)) && \
- !defined(CONFIG_BLACKFIN) && \
- !defined(CONFIG_M32R) && \
!defined(CONFIG_M68K) && \
!defined(CONFIG_MICROBLAZE) && \
!defined(CONFIG_NIOS2) && \
diff --git a/mm/Kconfig b/mm/Kconfig
index abefa573bcd8..d5004d82a1d6 100644
--- a/mm/Kconfig
+++ b/mm/Kconfig
@@ -278,13 +278,6 @@ config BOUNCE
by default when ZONE_DMA or HIGHMEM is selected, but you
may say n to override this.
-# On the 'tile' arch, USB OHCI needs the bounce pool since tilegx will often
-# have more than 4GB of memory, but we don't currently use the IOTLB to present
-# a 32-bit address to OHCI. So we need to use a bounce pool instead.
-config NEED_BOUNCE_POOL
- bool
- default y if TILE && USB_OHCI_HCD
-
config NR_QUICK
int
depends on QUICKLIST
diff --git a/mm/percpu.c b/mm/percpu.c
index 50e7fdf84055..79e3549cab0f 100644
--- a/mm/percpu.c
+++ b/mm/percpu.c
@@ -2719,11 +2719,7 @@ void __init setup_per_cpu_areas(void)
if (pcpu_setup_first_chunk(ai, fc) < 0)
panic("Failed to initialize percpu areas.");
-#ifdef CONFIG_CRIS
-#warning "the CRIS architecture has physical and virtual addresses confused"
-#else
pcpu_free_alloc_info(ai);
-#endif
}
#endif /* CONFIG_SMP */
WARNING: multiple messages have this Message-ID (diff)
From: Arnd Bergmann <arnd@arndb.de>
To: linux-arch@vger.kernel.org
Cc: linux-rtc@vger.kernel.org, linux-pwm@vger.kernel.org,
linux-fbdev@vger.kernel.org, linux-watchdog@vger.kernel.org,
Arnd Bergmann <arnd@arndb.de>,
linux-mm@kvack.org, netdev@vger.kernel.org,
linux-usb@vger.kernel.org, linux-wireless@vger.kernel.org,
linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
linux-spi@vger.kernel.org, linux-block@vger.kernel.org,
linux-ide@vger.kernel.org, linux-input@vger.kernel.org,
linux-fsdevel@vger.kernel.org
Subject: [PATCH 11/16] treewide: simplify Kconfig dependencies for removed archs
Date: Wed, 14 Mar 2018 14:43:46 +0000 [thread overview]
Message-ID: <20180314144614.1632190-1-arnd@arndb.de> (raw)
In-Reply-To: <20180314143529.1456168-1-arnd@arndb.de>
A lot of Kconfig symbols have architecture specific dependencies.
In those cases that depend on architectures we have already removed,
they can be omitted.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
block/bounce.c | 2 +-
drivers/ide/Kconfig | 2 +-
drivers/ide/ide-generic.c | 12 +-----------
drivers/input/joystick/analog.c | 2 +-
drivers/isdn/hisax/Kconfig | 10 +++++-----
drivers/net/ethernet/davicom/Kconfig | 2 +-
drivers/net/ethernet/smsc/Kconfig | 6 +++---
drivers/net/wireless/cisco/Kconfig | 2 +-
drivers/pwm/Kconfig | 2 +-
drivers/rtc/Kconfig | 2 +-
drivers/spi/Kconfig | 4 ++--
drivers/usb/musb/Kconfig | 2 +-
drivers/video/console/Kconfig | 3 +--
drivers/watchdog/Kconfig | 6 ------
drivers/watchdog/Makefile | 6 ------
fs/Kconfig.binfmt | 5 ++---
fs/minix/Kconfig | 2 +-
include/linux/ide.h | 7 +------
init/Kconfig | 5 ++---
lib/Kconfig.debug | 13 +++++--------
lib/test_user_copy.c | 2 --
mm/Kconfig | 7 -------
mm/percpu.c | 4 ----
23 files changed, 31 insertions(+), 77 deletions(-)
diff --git a/block/bounce.c b/block/bounce.c
index 6a3e68292273..dd0b93f2a871 100644
--- a/block/bounce.c
+++ b/block/bounce.c
@@ -31,7 +31,7 @@
static struct bio_set *bounce_bio_set, *bounce_bio_split;
static mempool_t *page_pool, *isa_page_pool;
-#if defined(CONFIG_HIGHMEM) || defined(CONFIG_NEED_BOUNCE_POOL)
+#if defined(CONFIG_HIGHMEM)
static __init int init_emergency_pool(void)
{
#if defined(CONFIG_HIGHMEM) && !defined(CONFIG_MEMORY_HOTPLUG)
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index cf1fb3fb5d26..901b8833847f 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -200,7 +200,7 @@ comment "IDE chipset support/bugfixes"
config IDE_GENERIC
tristate "generic/default IDE chipset support"
- depends on ALPHA || X86 || IA64 || M32R || MIPS || ARCH_RPC
+ depends on ALPHA || X86 || IA64 || MIPS || ARCH_RPC
default ARM && ARCH_RPC
help
This is the generic IDE driver. This driver attaches to the
diff --git a/drivers/ide/ide-generic.c b/drivers/ide/ide-generic.c
index 54d7c4685d23..80c0d69b83ac 100644
--- a/drivers/ide/ide-generic.c
+++ b/drivers/ide/ide-generic.c
@@ -13,13 +13,10 @@
#include <linux/ide.h>
#include <linux/pci_ids.h>
-/* FIXME: convert arm and m32r to use ide_platform host driver */
+/* FIXME: convert arm to use ide_platform host driver */
#ifdef CONFIG_ARM
#include <asm/irq.h>
#endif
-#ifdef CONFIG_M32R
-#include <asm/m32r.h>
-#endif
#define DRV_NAME "ide_generic"
@@ -35,13 +32,6 @@ static const struct ide_port_info ide_generic_port_info = {
#ifdef CONFIG_ARM
static const u16 legacy_bases[] = { 0x1f0 };
static const int legacy_irqs[] = { IRQ_HARDDISK };
-#elif defined(CONFIG_PLAT_M32700UT) || defined(CONFIG_PLAT_MAPPI2) || \
- defined(CONFIG_PLAT_OPSPUT)
-static const u16 legacy_bases[] = { 0x1f0 };
-static const int legacy_irqs[] = { PLD_IRQ_CFIREQ };
-#elif defined(CONFIG_PLAT_MAPPI3)
-static const u16 legacy_bases[] = { 0x1f0, 0x170 };
-static const int legacy_irqs[] = { PLD_IRQ_CFIREQ, PLD_IRQ_IDEIREQ };
#elif defined(CONFIG_ALPHA)
static const u16 legacy_bases[] = { 0x1f0, 0x170, 0x1e8, 0x168 };
static const int legacy_irqs[] = { 14, 15, 11, 10 };
diff --git a/drivers/input/joystick/analog.c b/drivers/input/joystick/analog.c
index be1b4921f22a..eefac7978f93 100644
--- a/drivers/input/joystick/analog.c
+++ b/drivers/input/joystick/analog.c
@@ -163,7 +163,7 @@ static unsigned int get_time_pit(void)
#define GET_TIME(x) do { x = (unsigned int)rdtsc(); } while (0)
#define DELTA(x,y) ((y)-(x))
#define TIME_NAME "TSC"
-#elif defined(__alpha__) || defined(CONFIG_ARM) || defined(CONFIG_ARM64) || defined(CONFIG_RISCV) || defined(CONFIG_TILE)
+#elif defined(__alpha__) || defined(CONFIG_ARM) || defined(CONFIG_ARM64) || defined(CONFIG_RISCV)
#define GET_TIME(x) do { x = get_cycles(); } while (0)
#define DELTA(x,y) ((y)-(x))
#define TIME_NAME "get_cycles"
diff --git a/drivers/isdn/hisax/Kconfig b/drivers/isdn/hisax/Kconfig
index eb83d94ab4fe..38cfc8baae19 100644
--- a/drivers/isdn/hisax/Kconfig
+++ b/drivers/isdn/hisax/Kconfig
@@ -109,7 +109,7 @@ config HISAX_16_3
config HISAX_TELESPCI
bool "Teles PCI"
- depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV || (XTENSA && !CPU_LITTLE_ENDIAN)))
+ depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || (XTENSA && !CPU_LITTLE_ENDIAN)))
help
This enables HiSax support for the Teles PCI.
See <file:Documentation/isdn/README.HiSax> on how to configure it.
@@ -237,7 +237,7 @@ config HISAX_MIC
config HISAX_NETJET
bool "NETjet card"
- depends on PCI && (BROKEN || !(PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV || (XTENSA && !CPU_LITTLE_ENDIAN) || MICROBLAZE))
+ depends on PCI && (BROKEN || !(PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || (XTENSA && !CPU_LITTLE_ENDIAN) || MICROBLAZE))
depends on VIRT_TO_BUS
help
This enables HiSax support for the NetJet from Traverse
@@ -249,7 +249,7 @@ config HISAX_NETJET
config HISAX_NETJET_U
bool "NETspider U card"
- depends on PCI && (BROKEN || !(PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV || (XTENSA && !CPU_LITTLE_ENDIAN) || MICROBLAZE))
+ depends on PCI && (BROKEN || !(PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || (XTENSA && !CPU_LITTLE_ENDIAN) || MICROBLAZE))
depends on VIRT_TO_BUS
help
This enables HiSax support for the Netspider U interface ISDN card
@@ -318,7 +318,7 @@ config HISAX_GAZEL
config HISAX_HFC_PCI
bool "HFC PCI-Bus cards"
- depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV || (XTENSA && !CPU_LITTLE_ENDIAN)))
+ depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || (XTENSA && !CPU_LITTLE_ENDIAN)))
help
This enables HiSax support for the HFC-S PCI 2BDS0 based cards.
@@ -343,7 +343,7 @@ config HISAX_HFC_SX
config HISAX_ENTERNOW_PCI
bool "Formula-n enter:now PCI card"
- depends on HISAX_NETJET && PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV || (XTENSA && !CPU_LITTLE_ENDIAN)))
+ depends on HISAX_NETJET && PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || (XTENSA && !CPU_LITTLE_ENDIAN)))
help
This enables HiSax support for the Formula-n enter:now PCI
ISDN card.
diff --git a/drivers/net/ethernet/davicom/Kconfig b/drivers/net/ethernet/davicom/Kconfig
index 7ec2d74f94d3..680a6d983f37 100644
--- a/drivers/net/ethernet/davicom/Kconfig
+++ b/drivers/net/ethernet/davicom/Kconfig
@@ -4,7 +4,7 @@
config DM9000
tristate "DM9000 support"
- depends on ARM || BLACKFIN || MIPS || COLDFIRE || NIOS2
+ depends on ARM || MIPS || COLDFIRE || NIOS2
select CRC32
select MII
---help---
diff --git a/drivers/net/ethernet/smsc/Kconfig b/drivers/net/ethernet/smsc/Kconfig
index 948603e9b905..3da0c573d2ab 100644
--- a/drivers/net/ethernet/smsc/Kconfig
+++ b/drivers/net/ethernet/smsc/Kconfig
@@ -5,8 +5,8 @@
config NET_VENDOR_SMSC
bool "SMC (SMSC)/Western Digital devices"
default y
- depends on ARM || ARM64 || ATARI_ETHERNAT || BLACKFIN || COLDFIRE || \
- ISA || M32R || MAC || MIPS || NIOS2 || PCI || \
+ depends on ARM || ARM64 || ATARI_ETHERNAT || COLDFIRE || \
+ ISA || MAC || MIPS || NIOS2 || PCI || \
PCMCIA || SUPERH || XTENSA || H8300
---help---
If you have a network (Ethernet) card belonging to this class, say Y.
@@ -37,7 +37,7 @@ config SMC91X
select CRC32
select MII
depends on !OF || GPIOLIB
- depends on ARM || ARM64 || ATARI_ETHERNAT || BLACKFIN || COLDFIRE || \
+ depends on ARM || ARM64 || ATARI_ETHERNAT || COLDFIRE || \
M32R || MIPS || NIOS2 || SUPERH || XTENSA || H8300
---help---
This is a driver for SMC's 91x series of Ethernet chipsets,
diff --git a/drivers/net/wireless/cisco/Kconfig b/drivers/net/wireless/cisco/Kconfig
index b22567dff893..8ed0b154bb33 100644
--- a/drivers/net/wireless/cisco/Kconfig
+++ b/drivers/net/wireless/cisco/Kconfig
@@ -33,7 +33,7 @@ config AIRO
config AIRO_CS
tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards"
- depends on CFG80211 && PCMCIA && (BROKEN || !M32R)
+ depends on CFG80211 && PCMCIA
select WIRELESS_EXT
select WEXT_SPY
select WEXT_PRIV
diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index 763ee50ea57d..f16aad3bf5d6 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -43,7 +43,7 @@ config PWM_AB8500
config PWM_ATMEL
tristate "Atmel PWM support"
- depends on ARCH_AT91 || AVR32
+ depends on ARCH_AT91
help
Generic PWM framework driver for Atmel SoC.
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index be5a3dc99c11..46af10ac45fc 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -868,7 +868,7 @@ comment "Platform RTC drivers"
config RTC_DRV_CMOS
tristate "PC-style 'CMOS'"
- depends on X86 || ARM || M32R || PPC || MIPS || SPARC64
+ depends on X86 || ARM || PPC || MIPS || SPARC64
default y if X86
select RTC_MC146818_LIB
help
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 603783976b81..103c13fcefa0 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -72,10 +72,10 @@ config SPI_ARMADA_3700
config SPI_ATMEL
tristate "Atmel SPI Controller"
depends on HAS_DMA
- depends on (ARCH_AT91 || AVR32 || COMPILE_TEST)
+ depends on ARCH_AT91 || COMPILE_TEST
help
This selects a driver for the Atmel SPI Controller, present on
- many AT32 (AVR32) and AT91 (ARM) chips.
+ many AT91 ARM chips.
config SPI_AU1550
tristate "Au1550/Au1200/Au1300 SPI Controller"
diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index 5506a9c03c1f..e757afc1cfd0 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -87,7 +87,7 @@ config USB_MUSB_DA8XX
config USB_MUSB_TUSB6010
tristate "TUSB6010"
depends on HAS_IOMEM
- depends on (ARCH_OMAP2PLUS || COMPILE_TEST) && !BLACKFIN
+ depends on ARCH_OMAP2PLUS || COMPILE_TEST
depends on NOP_USB_XCEIV = USB_MUSB_HDRC # both built-in or both modules
config USB_MUSB_OMAP2PLUS
diff --git a/drivers/video/console/Kconfig b/drivers/video/console/Kconfig
index 005ed87c8216..a9e398c144f8 100644
--- a/drivers/video/console/Kconfig
+++ b/drivers/video/console/Kconfig
@@ -6,8 +6,7 @@ menu "Console display driver support"
config VGA_CONSOLE
bool "VGA text console" if EXPERT || !X86
- depends on !4xx && !PPC_8xx && !SPARC && !M68K && !PARISC && !FRV && \
- !SUPERH && !BLACKFIN && !AVR32 && !CRIS && \
+ depends on !4xx && !PPC_8xx && !SPARC && !M68K && !PARISC && !SUPERH && \
(!ARM || ARCH_FOOTBRIDGE || ARCH_INTEGRATOR || ARCH_NETWINDER) && \
!ARM64 && !ARC && !MICROBLAZE && !OPENRISC
default y
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 0e19679348d1..79020ce95de2 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -828,10 +828,6 @@ config BFIN_WDT
To compile this driver as a module, choose M here: the
module will be called bfin_wdt.
-# CRIS Architecture
-
-# FRV Architecture
-
# X86 (i386 + ia64 + x86_64) Architecture
config ACQUIRE_WDT
@@ -1431,8 +1427,6 @@ config NIC7018_WDT
To compile this driver as a module, choose M here: the module will be
called nic7018_wdt.
-# M32R Architecture
-
# M68K Architecture
config M54xx_WATCHDOG
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 0474d38aa854..1f9a0235f22c 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -94,10 +94,6 @@ obj-$(CONFIG_SPRD_WATCHDOG) += sprd_wdt.o
# BLACKFIN Architecture
obj-$(CONFIG_BFIN_WDT) += bfin_wdt.o
-# CRIS Architecture
-
-# FRV Architecture
-
# X86 (i386 + ia64 + x86_64) Architecture
obj-$(CONFIG_ACQUIRE_WDT) += acquirewdt.o
obj-$(CONFIG_ADVANTECH_WDT) += advantechwdt.o
@@ -146,8 +142,6 @@ obj-$(CONFIG_INTEL_MEI_WDT) += mei_wdt.o
obj-$(CONFIG_NI903X_WDT) += ni903x_wdt.o
obj-$(CONFIG_NIC7018_WDT) += nic7018_wdt.o
-# M32R Architecture
-
# M68K Architecture
obj-$(CONFIG_M54xx_WATCHDOG) += m54xx_wdt.o
diff --git a/fs/Kconfig.binfmt b/fs/Kconfig.binfmt
index 58c2bbd385ad..57a27c42b5ac 100644
--- a/fs/Kconfig.binfmt
+++ b/fs/Kconfig.binfmt
@@ -1,6 +1,6 @@
config BINFMT_ELF
bool "Kernel support for ELF binaries"
- depends on MMU && (BROKEN || !FRV)
+ depends on MMU
select ELFCORE
default y
---help---
@@ -35,7 +35,7 @@ config ARCH_BINFMT_ELF_STATE
config BINFMT_ELF_FDPIC
bool "Kernel support for FDPIC ELF binaries"
default y if !BINFMT_ELF
- depends on (ARM || FRV || BLACKFIN || (SUPERH32 && !MMU) || C6X)
+ depends on (ARM || (SUPERH32 && !MMU) || C6X)
select ELFCORE
help
ELF FDPIC binaries are based on ELF, but allow the individual load
@@ -90,7 +90,6 @@ config BINFMT_SCRIPT
config BINFMT_FLAT
bool "Kernel support for flat binaries"
depends on !MMU || ARM || M68K
- depends on !FRV || BROKEN
help
Support uClinux FLAT format binaries.
diff --git a/fs/minix/Kconfig b/fs/minix/Kconfig
index f2a0cfcef11d..bcd53a79156f 100644
--- a/fs/minix/Kconfig
+++ b/fs/minix/Kconfig
@@ -18,7 +18,7 @@ config MINIX_FS
config MINIX_FS_NATIVE_ENDIAN
def_bool MINIX_FS
- depends on M32R || MICROBLAZE || MIPS || S390 || SUPERH || SPARC || XTENSA || (M68K && !MMU)
+ depends on MICROBLAZE || MIPS || S390 || SUPERH || SPARC || XTENSA || (M68K && !MMU)
config MINIX_FS_BIG_ENDIAN_16BIT_INDEXED
def_bool MINIX_FS
diff --git a/include/linux/ide.h b/include/linux/ide.h
index 20d42c0d9fb6..1d6f16110eae 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -25,15 +25,10 @@
#include <asm/byteorder.h>
#include <asm/io.h>
-#if defined(CONFIG_CRIS) || defined(CONFIG_FRV)
-# define SUPPORT_VLB_SYNC 0
-#else
-# define SUPPORT_VLB_SYNC 1
-#endif
-
/*
* Probably not wise to fiddle with these
*/
+#define SUPPORT_VLB_SYNC 1
#define IDE_DEFAULT_MAX_FAILURES 1
#define ERROR_MAX 8 /* Max read/write errors per sector */
#define ERROR_RESET 3 /* Reset controller every 4th retry */
diff --git a/init/Kconfig b/init/Kconfig
index a14bcc9724a2..2852692d7c9c 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -998,7 +998,6 @@ config RELAY
config BLK_DEV_INITRD
bool "Initial RAM filesystem and RAM disk (initramfs/initrd) support"
- depends on BROKEN || !FRV
help
The initial RAM filesystem is a ramfs which is loaded by the
boot loader (loadlin or lilo) and that is mounted as root
@@ -1108,7 +1107,7 @@ config MULTIUSER
config SGETMASK_SYSCALL
bool "sgetmask/ssetmask syscalls support" if EXPERT
- def_bool PARISC || BLACKFIN || M68K || PPC || MIPS || X86 || SPARC || CRIS || MICROBLAZE || SUPERH
+ def_bool PARISC || M68K || PPC || MIPS || X86 || SPARC || MICROBLAZE || SUPERH
---help---
sys_sgetmask and sys_ssetmask are obsolete system calls
no longer supported in libc but still enabled by default in some
@@ -1370,7 +1369,7 @@ config KALLSYMS_ABSOLUTE_PERCPU
config KALLSYMS_BASE_RELATIVE
bool
depends on KALLSYMS
- default !IA64 && !(TILE && 64BIT)
+ default !IA64
help
Instead of emitting them as absolute values in the native word size,
emit the symbol references in the kallsyms table as 32-bit entries,
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 41ac9d294245..6927c6d8d185 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -165,7 +165,7 @@ config DEBUG_INFO_REDUCED
config DEBUG_INFO_SPLIT
bool "Produce split debuginfo in .dwo files"
- depends on DEBUG_INFO && !FRV
+ depends on DEBUG_INFO
help
Generate debug info into separate .dwo files. This significantly
reduces the build directory size for builds with DEBUG_INFO,
@@ -354,10 +354,7 @@ config ARCH_WANT_FRAME_POINTERS
config FRAME_POINTER
bool "Compile the kernel with frame pointers"
- depends on DEBUG_KERNEL && \
- (CRIS || M68K || FRV || UML || \
- SUPERH || BLACKFIN) || \
- ARCH_WANT_FRAME_POINTERS
+ depends on DEBUG_KERNEL && (M68K || UML || SUPERH) || ARCH_WANT_FRAME_POINTERS
default y if (DEBUG_INFO && UML) || ARCH_WANT_FRAME_POINTERS
help
If you say Y here the resulting kernel image will be slightly
@@ -1138,7 +1135,7 @@ config LOCKDEP
bool
depends on DEBUG_KERNEL && TRACE_IRQFLAGS_SUPPORT && STACKTRACE_SUPPORT && LOCKDEP_SUPPORT
select STACKTRACE
- select FRAME_POINTER if !MIPS && !PPC && !ARM_UNWIND && !S390 && !MICROBLAZE && !ARC && !SCORE && !X86
+ select FRAME_POINTER if !MIPS && !PPC && !ARM_UNWIND && !S390 && !MICROBLAZE && !ARC && !X86
select KALLSYMS
select KALLSYMS_ALL
@@ -1571,7 +1568,7 @@ config FAULT_INJECTION_STACKTRACE_FILTER
depends on FAULT_INJECTION_DEBUG_FS && STACKTRACE_SUPPORT
depends on !X86_64
select STACKTRACE
- select FRAME_POINTER if !MIPS && !PPC && !S390 && !MICROBLAZE && !ARM_UNWIND && !ARC && !SCORE && !X86
+ select FRAME_POINTER if !MIPS && !PPC && !S390 && !MICROBLAZE && !ARM_UNWIND && !ARC && !X86
help
Provide stacktrace filter for fault-injection capabilities
@@ -1969,7 +1966,7 @@ config STRICT_DEVMEM
bool "Filter access to /dev/mem"
depends on MMU && DEVMEM
depends on ARCH_HAS_DEVMEM_IS_ALLOWED
- default y if TILE || PPC || X86 || ARM64
+ default y if PPC || X86 || ARM64
---help---
If this option is disabled, you allow userspace (root) access to all
of memory, including kernel and userspace memory. Accidental
diff --git a/lib/test_user_copy.c b/lib/test_user_copy.c
index a6556f3364d1..e161f0498f42 100644
--- a/lib/test_user_copy.c
+++ b/lib/test_user_copy.c
@@ -31,8 +31,6 @@
* their capability at compile-time, we just have to opt-out certain archs.
*/
#if BITS_PER_LONG = 64 || (!(defined(CONFIG_ARM) && !defined(MMU)) && \
- !defined(CONFIG_BLACKFIN) && \
- !defined(CONFIG_M32R) && \
!defined(CONFIG_M68K) && \
!defined(CONFIG_MICROBLAZE) && \
!defined(CONFIG_NIOS2) && \
diff --git a/mm/Kconfig b/mm/Kconfig
index abefa573bcd8..d5004d82a1d6 100644
--- a/mm/Kconfig
+++ b/mm/Kconfig
@@ -278,13 +278,6 @@ config BOUNCE
by default when ZONE_DMA or HIGHMEM is selected, but you
may say n to override this.
-# On the 'tile' arch, USB OHCI needs the bounce pool since tilegx will often
-# have more than 4GB of memory, but we don't currently use the IOTLB to present
-# a 32-bit address to OHCI. So we need to use a bounce pool instead.
-config NEED_BOUNCE_POOL
- bool
- default y if TILE && USB_OHCI_HCD
-
config NR_QUICK
int
depends on QUICKLIST
diff --git a/mm/percpu.c b/mm/percpu.c
index 50e7fdf84055..79e3549cab0f 100644
--- a/mm/percpu.c
+++ b/mm/percpu.c
@@ -2719,11 +2719,7 @@ void __init setup_per_cpu_areas(void)
if (pcpu_setup_first_chunk(ai, fc) < 0)
panic("Failed to initialize percpu areas.");
-#ifdef CONFIG_CRIS
-#warning "the CRIS architecture has physical and virtual addresses confused"
-#else
pcpu_free_alloc_info(ai);
-#endif
}
#endif /* CONFIG_SMP */
--
2.9.0
next prev parent reply other threads:[~2018-03-14 14:46 UTC|newest]
Thread overview: 98+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-14 14:34 [PATCH 00/16] remove eight obsolete architectures Arnd Bergmann
2018-03-14 14:34 ` Arnd Bergmann
2018-03-14 14:34 ` Arnd Bergmann
2018-03-14 14:34 ` Arnd Bergmann
2018-03-14 14:36 ` [PATCH 01/16] mn10300: Remove the architecture Arnd Bergmann
2018-03-14 14:36 ` [PATCH 02/16] arch: remove frv port Arnd Bergmann
2018-03-14 14:36 ` [PATCH 03/16] arch: remove m32r port Arnd Bergmann
2018-03-14 14:36 ` [PATCH 04/16] arch: remove score port Arnd Bergmann
2018-03-14 14:36 ` [PATCH 05/16] arch: remove blackfin port Arnd Bergmann
2018-03-14 16:51 ` [PATCH] scripts/checkstack.pl: remove blackfin support Tobias Klauser
2018-03-14 17:04 ` Arnd Bergmann
2018-03-15 22:24 ` [PATCH 05/16] arch: remove blackfin port Bryan Wu
2018-03-14 14:36 ` [PATCH 06/16] arch: remove tile port Arnd Bergmann
2018-03-16 1:23 ` Chris Metcalf
2018-03-16 8:12 ` Arnd Bergmann
2018-03-14 14:36 ` [PATCH 07/16] CRIS: Drop support for the CRIS port Arnd Bergmann
2018-03-14 14:39 ` [PATCH 10/16] mm: remove obsolete alloc_remap() Arnd Bergmann
2018-03-14 14:50 ` Pavel Tatashin
2018-03-14 14:56 ` Arnd Bergmann
2018-03-14 14:59 ` Pavel Tatashin
2018-03-14 14:43 ` Arnd Bergmann [this message]
2018-03-14 14:43 ` [PATCH 11/16] treewide: simplify Kconfig dependencies for removed archs Arnd Bergmann
2018-03-14 14:43 ` [11/16] " Arnd Bergmann
2018-03-14 14:43 ` [PATCH 11/16] " Arnd Bergmann
2018-03-14 14:43 ` [PATCH 12/16] asm-generic: siginfo: remove obsolete #ifdefs Arnd Bergmann
2018-03-14 16:38 ` Eric W. Biederman
2018-03-14 20:31 ` Dominik Brodowski
2018-03-14 20:40 ` Arnd Bergmann
2018-03-14 20:45 ` Dominik Brodowski
2018-03-15 10:06 ` Eric W. Biederman
2018-03-15 10:48 ` Arnd Bergmann
2018-03-15 11:37 ` Eric W. Biederman
2018-03-15 12:50 ` Arnd Bergmann
2018-03-15 18:07 ` Eric W. Biederman
2018-03-15 12:54 ` [PATCH 11/16] treewide: simplify Kconfig dependencies for removed archs Kalle Valo
2018-03-15 12:54 ` Kalle Valo
2018-03-15 12:54 ` [11/16] " Kalle Valo
2018-03-15 12:54 ` [PATCH 11/16] " Kalle Valo
2018-03-15 12:54 ` Kalle Valo
2018-03-19 23:06 ` Alexandre Belloni
2018-03-19 23:06 ` Alexandre Belloni
2018-03-19 23:06 ` [11/16] " Alexandre Belloni
2018-03-14 14:51 ` [PATCH 13/16] Documentation: arch-support: remove obsolete architectures Arnd Bergmann
2018-03-14 14:52 ` [PATCH 15/16] recordmcount.pl: drop blackin and tile support Arnd Bergmann
2018-03-15 20:42 ` Steven Rostedt
2018-03-14 14:53 ` [PATCH 16/16] ktest: remove obsolete architectures Arnd Bergmann
2018-03-15 20:46 ` Steven Rostedt
2018-03-14 20:38 ` [PATCH 14/16] asm-generic: clean up asm/unistd.h Arnd Bergmann
2018-03-15 9:42 ` [PATCH 00/16] remove eight obsolete architectures David Howells
2018-03-15 9:42 ` David Howells
2018-03-15 9:42 ` David Howells
2018-03-15 9:42 ` David Howells
2018-03-15 9:48 ` Geert Uytterhoeven
2018-03-15 9:48 ` Geert Uytterhoeven
2018-03-15 9:48 ` Geert Uytterhoeven
2018-03-15 9:48 ` Geert Uytterhoeven
2018-03-15 16:56 ` rfc: remove print_vma_addr ? (was Re: [PATCH 00/16] remove eight obsolete architectures) Joe Perches
2018-03-15 16:56 ` Joe Perches
2018-03-15 16:56 ` Joe Perches
2018-03-15 16:56 ` Joe Perches
2018-03-15 16:56 ` Joe Perches
2018-03-15 16:56 ` Joe Perches
2018-03-15 17:08 ` Matthew Wilcox
2018-03-15 17:08 ` Matthew Wilcox
2018-03-15 17:08 ` Matthew Wilcox
2018-03-15 17:08 ` Matthew Wilcox
2018-03-15 17:08 ` Matthew Wilcox
2018-03-15 17:08 ` Matthew Wilcox
2018-03-15 17:13 ` Joe Perches
2018-03-15 17:13 ` Joe Perches
2018-03-15 17:13 ` Joe Perches
2018-03-15 17:13 ` Joe Perches
2018-03-15 17:13 ` Joe Perches
2018-03-15 17:13 ` Joe Perches
2018-03-15 9:56 ` [PATCH 00/16] remove eight obsolete architectures Arnd Bergmann
2018-03-15 9:56 ` Arnd Bergmann
2018-03-15 9:56 ` Arnd Bergmann
2018-03-15 9:56 ` Arnd Bergmann
2018-03-16 4:50 ` afzal mohammed
2018-03-16 4:50 ` afzal mohammed
2018-03-16 4:50 ` afzal mohammed
2018-03-15 9:59 ` Hannes Reinecke
2018-03-15 9:59 ` Hannes Reinecke
2018-03-15 9:59 ` Hannes Reinecke
2018-03-15 9:59 ` Hannes Reinecke
2018-03-15 9:59 ` Hannes Reinecke
2018-03-15 10:42 ` Arnd Bergmann
2018-03-15 10:42 ` Arnd Bergmann
2018-03-15 10:42 ` Arnd Bergmann
2018-03-15 10:42 ` Arnd Bergmann
2018-03-15 14:17 ` Christoph Hellwig
2018-03-15 14:17 ` Christoph Hellwig
2018-03-15 14:17 ` Christoph Hellwig
2018-03-15 14:17 ` Christoph Hellwig
2018-03-20 17:11 ` Palmer Dabbelt
2018-03-20 17:11 ` Palmer Dabbelt
2018-03-20 17:11 ` Palmer Dabbelt
2018-03-20 17:11 ` Palmer Dabbelt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180314144614.1632190-1-arnd@arndb.de \
--to=arnd@arndb.de \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-arch@vger.kernel.org \
--cc=linux-block@vger.kernel.org \
--cc=linux-fbdev@vger.kernel.org \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-ide@vger.kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=linux-pwm@vger.kernel.org \
--cc=linux-rtc@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.