All of lore.kernel.org
 help / color / mirror / Atom feed
From: guangrong.xiao@gmail.com
To: pbonzini@redhat.com, mst@redhat.com, mtosatti@redhat.com
Cc: kvm@vger.kernel.org, Xiao Guangrong <xiaoguangrong@tencent.com>,
	qemu-devel@nongnu.org, peterx@redhat.com, dgilbert@redhat.com,
	wei.w.wang@intel.com, jiang.biao2@zte.com.cn
Subject: [PATCH v2 03/10] migration: stop decompression to allocate and free memory frequently
Date: Tue, 27 Mar 2018 17:10:36 +0800	[thread overview]
Message-ID: <20180327091043.30220-4-xiaoguangrong@tencent.com> (raw)
In-Reply-To: <20180327091043.30220-1-xiaoguangrong@tencent.com>

From: Xiao Guangrong <xiaoguangrong@tencent.com>

Current code uses uncompress() to decompress memory which manages
memory internally, that causes huge memory is allocated and freed
very frequently, more worse, frequently returning memory to kernel
will flush TLBs

So, we maintain the memory by ourselves and reuse it for each
decompression

Reviewed-by: Jiang Biao <jiang.biao2@zte.com.cn>
Signed-off-by: Xiao Guangrong <xiaoguangrong@tencent.com>
---
 migration/ram.c | 110 ++++++++++++++++++++++++++++++++++++++++----------------
 1 file changed, 80 insertions(+), 30 deletions(-)

diff --git a/migration/ram.c b/migration/ram.c
index e043a192e1..6b699650ca 100644
--- a/migration/ram.c
+++ b/migration/ram.c
@@ -281,6 +281,7 @@ struct DecompressParam {
     void *des;
     uint8_t *compbuf;
     int len;
+    z_stream stream;
 };
 typedef struct DecompressParam DecompressParam;
 
@@ -2526,6 +2527,31 @@ void ram_handle_compressed(void *host, uint8_t ch, uint64_t size)
     }
 }
 
+/* return the size after decompression, or negative value on error */
+static int
+qemu_uncompress_data(z_stream *stream, uint8_t *dest, size_t dest_len,
+                     const uint8_t *source, size_t source_len)
+{
+    int err;
+
+    err = inflateReset(stream);
+    if (err != Z_OK) {
+        return -1;
+    }
+
+    stream->avail_in = source_len;
+    stream->next_in = (uint8_t *)source;
+    stream->avail_out = dest_len;
+    stream->next_out = dest;
+
+    err = inflate(stream, Z_NO_FLUSH);
+    if (err != Z_STREAM_END) {
+        return -1;
+    }
+
+    return stream->total_out;
+}
+
 static void *do_data_decompress(void *opaque)
 {
     DecompressParam *param = opaque;
@@ -2542,13 +2568,13 @@ static void *do_data_decompress(void *opaque)
             qemu_mutex_unlock(&param->mutex);
 
             pagesize = TARGET_PAGE_SIZE;
-            /* uncompress() will return failed in some case, especially
-             * when the page is dirted when doing the compression, it's
-             * not a problem because the dirty page will be retransferred
+            /* qemu_uncompress_data() will return failed in some case,
+             * especially when the page is dirtied when doing the compression,
+             * it's not a problem because the dirty page will be retransferred
              * and uncompress() won't break the data in other pages.
              */
-            uncompress((Bytef *)des, &pagesize,
-                       (const Bytef *)param->compbuf, len);
+            qemu_uncompress_data(&param->stream, des, pagesize, param->compbuf,
+                                 len);
 
             qemu_mutex_lock(&decomp_done_lock);
             param->done = true;
@@ -2583,30 +2609,6 @@ static void wait_for_decompress_done(void)
     qemu_mutex_unlock(&decomp_done_lock);
 }
 
-static void compress_threads_load_setup(void)
-{
-    int i, thread_count;
-
-    if (!migrate_use_compression()) {
-        return;
-    }
-    thread_count = migrate_decompress_threads();
-    decompress_threads = g_new0(QemuThread, thread_count);
-    decomp_param = g_new0(DecompressParam, thread_count);
-    qemu_mutex_init(&decomp_done_lock);
-    qemu_cond_init(&decomp_done_cond);
-    for (i = 0; i < thread_count; i++) {
-        qemu_mutex_init(&decomp_param[i].mutex);
-        qemu_cond_init(&decomp_param[i].cond);
-        decomp_param[i].compbuf = g_malloc0(compressBound(TARGET_PAGE_SIZE));
-        decomp_param[i].done = true;
-        decomp_param[i].quit = false;
-        qemu_thread_create(decompress_threads + i, "decompress",
-                           do_data_decompress, decomp_param + i,
-                           QEMU_THREAD_JOINABLE);
-    }
-}
-
 static void compress_threads_load_cleanup(void)
 {
     int i, thread_count;
@@ -2616,16 +2618,27 @@ static void compress_threads_load_cleanup(void)
     }
     thread_count = migrate_decompress_threads();
     for (i = 0; i < thread_count; i++) {
+        /* see the comments in compress_threads_save_cleanup() */
+        if (!decomp_param[i].stream.opaque) {
+            break;
+        }
+
         qemu_mutex_lock(&decomp_param[i].mutex);
         decomp_param[i].quit = true;
         qemu_cond_signal(&decomp_param[i].cond);
         qemu_mutex_unlock(&decomp_param[i].mutex);
     }
     for (i = 0; i < thread_count; i++) {
+        if (!decomp_param[i].stream.opaque) {
+            break;
+        }
+
         qemu_thread_join(decompress_threads + i);
         qemu_mutex_destroy(&decomp_param[i].mutex);
         qemu_cond_destroy(&decomp_param[i].cond);
         g_free(decomp_param[i].compbuf);
+        inflateEnd(&decomp_param[i].stream);
+        decomp_param[i].stream.opaque = NULL;
     }
     g_free(decompress_threads);
     g_free(decomp_param);
@@ -2633,6 +2646,40 @@ static void compress_threads_load_cleanup(void)
     decomp_param = NULL;
 }
 
+static int compress_threads_load_setup(void)
+{
+    int i, thread_count;
+
+    if (!migrate_use_compression()) {
+        return 0;
+    }
+
+    thread_count = migrate_decompress_threads();
+    decompress_threads = g_new0(QemuThread, thread_count);
+    decomp_param = g_new0(DecompressParam, thread_count);
+    qemu_mutex_init(&decomp_done_lock);
+    qemu_cond_init(&decomp_done_cond);
+    for (i = 0; i < thread_count; i++) {
+        if (inflateInit(&decomp_param[i].stream) != Z_OK) {
+            goto exit;
+        }
+        decomp_param[i].stream.opaque = &decomp_param[i];
+
+        qemu_mutex_init(&decomp_param[i].mutex);
+        qemu_cond_init(&decomp_param[i].cond);
+        decomp_param[i].compbuf = g_malloc0(compressBound(TARGET_PAGE_SIZE));
+        decomp_param[i].done = true;
+        decomp_param[i].quit = false;
+        qemu_thread_create(decompress_threads + i, "decompress",
+                           do_data_decompress, decomp_param + i,
+                           QEMU_THREAD_JOINABLE);
+    }
+    return 0;
+exit:
+    compress_threads_load_cleanup();
+    return -1;
+}
+
 static void decompress_data_with_multi_threads(QEMUFile *f,
                                                void *host, int len)
 {
@@ -2672,8 +2719,11 @@ static void decompress_data_with_multi_threads(QEMUFile *f,
  */
 static int ram_load_setup(QEMUFile *f, void *opaque)
 {
+    if (compress_threads_load_setup()) {
+        return -1;
+    }
+
     xbzrle_load_setup();
-    compress_threads_load_setup();
     ramblock_recv_map_init();
     return 0;
 }
-- 
2.14.3

WARNING: multiple messages have this Message-ID (diff)
From: guangrong.xiao@gmail.com
To: pbonzini@redhat.com, mst@redhat.com, mtosatti@redhat.com
Cc: qemu-devel@nongnu.org, kvm@vger.kernel.org, dgilbert@redhat.com,
	peterx@redhat.com, jiang.biao2@zte.com.cn, wei.w.wang@intel.com,
	Xiao Guangrong <xiaoguangrong@tencent.com>
Subject: [Qemu-devel] [PATCH v2 03/10] migration: stop decompression to allocate and free memory frequently
Date: Tue, 27 Mar 2018 17:10:36 +0800	[thread overview]
Message-ID: <20180327091043.30220-4-xiaoguangrong@tencent.com> (raw)
In-Reply-To: <20180327091043.30220-1-xiaoguangrong@tencent.com>

From: Xiao Guangrong <xiaoguangrong@tencent.com>

Current code uses uncompress() to decompress memory which manages
memory internally, that causes huge memory is allocated and freed
very frequently, more worse, frequently returning memory to kernel
will flush TLBs

So, we maintain the memory by ourselves and reuse it for each
decompression

Reviewed-by: Jiang Biao <jiang.biao2@zte.com.cn>
Signed-off-by: Xiao Guangrong <xiaoguangrong@tencent.com>
---
 migration/ram.c | 110 ++++++++++++++++++++++++++++++++++++++++----------------
 1 file changed, 80 insertions(+), 30 deletions(-)

diff --git a/migration/ram.c b/migration/ram.c
index e043a192e1..6b699650ca 100644
--- a/migration/ram.c
+++ b/migration/ram.c
@@ -281,6 +281,7 @@ struct DecompressParam {
     void *des;
     uint8_t *compbuf;
     int len;
+    z_stream stream;
 };
 typedef struct DecompressParam DecompressParam;
 
@@ -2526,6 +2527,31 @@ void ram_handle_compressed(void *host, uint8_t ch, uint64_t size)
     }
 }
 
+/* return the size after decompression, or negative value on error */
+static int
+qemu_uncompress_data(z_stream *stream, uint8_t *dest, size_t dest_len,
+                     const uint8_t *source, size_t source_len)
+{
+    int err;
+
+    err = inflateReset(stream);
+    if (err != Z_OK) {
+        return -1;
+    }
+
+    stream->avail_in = source_len;
+    stream->next_in = (uint8_t *)source;
+    stream->avail_out = dest_len;
+    stream->next_out = dest;
+
+    err = inflate(stream, Z_NO_FLUSH);
+    if (err != Z_STREAM_END) {
+        return -1;
+    }
+
+    return stream->total_out;
+}
+
 static void *do_data_decompress(void *opaque)
 {
     DecompressParam *param = opaque;
@@ -2542,13 +2568,13 @@ static void *do_data_decompress(void *opaque)
             qemu_mutex_unlock(&param->mutex);
 
             pagesize = TARGET_PAGE_SIZE;
-            /* uncompress() will return failed in some case, especially
-             * when the page is dirted when doing the compression, it's
-             * not a problem because the dirty page will be retransferred
+            /* qemu_uncompress_data() will return failed in some case,
+             * especially when the page is dirtied when doing the compression,
+             * it's not a problem because the dirty page will be retransferred
              * and uncompress() won't break the data in other pages.
              */
-            uncompress((Bytef *)des, &pagesize,
-                       (const Bytef *)param->compbuf, len);
+            qemu_uncompress_data(&param->stream, des, pagesize, param->compbuf,
+                                 len);
 
             qemu_mutex_lock(&decomp_done_lock);
             param->done = true;
@@ -2583,30 +2609,6 @@ static void wait_for_decompress_done(void)
     qemu_mutex_unlock(&decomp_done_lock);
 }
 
-static void compress_threads_load_setup(void)
-{
-    int i, thread_count;
-
-    if (!migrate_use_compression()) {
-        return;
-    }
-    thread_count = migrate_decompress_threads();
-    decompress_threads = g_new0(QemuThread, thread_count);
-    decomp_param = g_new0(DecompressParam, thread_count);
-    qemu_mutex_init(&decomp_done_lock);
-    qemu_cond_init(&decomp_done_cond);
-    for (i = 0; i < thread_count; i++) {
-        qemu_mutex_init(&decomp_param[i].mutex);
-        qemu_cond_init(&decomp_param[i].cond);
-        decomp_param[i].compbuf = g_malloc0(compressBound(TARGET_PAGE_SIZE));
-        decomp_param[i].done = true;
-        decomp_param[i].quit = false;
-        qemu_thread_create(decompress_threads + i, "decompress",
-                           do_data_decompress, decomp_param + i,
-                           QEMU_THREAD_JOINABLE);
-    }
-}
-
 static void compress_threads_load_cleanup(void)
 {
     int i, thread_count;
@@ -2616,16 +2618,27 @@ static void compress_threads_load_cleanup(void)
     }
     thread_count = migrate_decompress_threads();
     for (i = 0; i < thread_count; i++) {
+        /* see the comments in compress_threads_save_cleanup() */
+        if (!decomp_param[i].stream.opaque) {
+            break;
+        }
+
         qemu_mutex_lock(&decomp_param[i].mutex);
         decomp_param[i].quit = true;
         qemu_cond_signal(&decomp_param[i].cond);
         qemu_mutex_unlock(&decomp_param[i].mutex);
     }
     for (i = 0; i < thread_count; i++) {
+        if (!decomp_param[i].stream.opaque) {
+            break;
+        }
+
         qemu_thread_join(decompress_threads + i);
         qemu_mutex_destroy(&decomp_param[i].mutex);
         qemu_cond_destroy(&decomp_param[i].cond);
         g_free(decomp_param[i].compbuf);
+        inflateEnd(&decomp_param[i].stream);
+        decomp_param[i].stream.opaque = NULL;
     }
     g_free(decompress_threads);
     g_free(decomp_param);
@@ -2633,6 +2646,40 @@ static void compress_threads_load_cleanup(void)
     decomp_param = NULL;
 }
 
+static int compress_threads_load_setup(void)
+{
+    int i, thread_count;
+
+    if (!migrate_use_compression()) {
+        return 0;
+    }
+
+    thread_count = migrate_decompress_threads();
+    decompress_threads = g_new0(QemuThread, thread_count);
+    decomp_param = g_new0(DecompressParam, thread_count);
+    qemu_mutex_init(&decomp_done_lock);
+    qemu_cond_init(&decomp_done_cond);
+    for (i = 0; i < thread_count; i++) {
+        if (inflateInit(&decomp_param[i].stream) != Z_OK) {
+            goto exit;
+        }
+        decomp_param[i].stream.opaque = &decomp_param[i];
+
+        qemu_mutex_init(&decomp_param[i].mutex);
+        qemu_cond_init(&decomp_param[i].cond);
+        decomp_param[i].compbuf = g_malloc0(compressBound(TARGET_PAGE_SIZE));
+        decomp_param[i].done = true;
+        decomp_param[i].quit = false;
+        qemu_thread_create(decompress_threads + i, "decompress",
+                           do_data_decompress, decomp_param + i,
+                           QEMU_THREAD_JOINABLE);
+    }
+    return 0;
+exit:
+    compress_threads_load_cleanup();
+    return -1;
+}
+
 static void decompress_data_with_multi_threads(QEMUFile *f,
                                                void *host, int len)
 {
@@ -2672,8 +2719,11 @@ static void decompress_data_with_multi_threads(QEMUFile *f,
  */
 static int ram_load_setup(QEMUFile *f, void *opaque)
 {
+    if (compress_threads_load_setup()) {
+        return -1;
+    }
+
     xbzrle_load_setup();
-    compress_threads_load_setup();
     ramblock_recv_map_init();
     return 0;
 }
-- 
2.14.3

  parent reply	other threads:[~2018-03-27  9:10 UTC|newest]

Thread overview: 44+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-03-27  9:10 [PATCH v2 00/10] migration: improve and cleanup compression guangrong.xiao
2018-03-27  9:10 ` [Qemu-devel] " guangrong.xiao
2018-03-27  9:10 ` [PATCH v2 01/10] migration: stop compressing page in migration thread guangrong.xiao
2018-03-27  9:10   ` [Qemu-devel] " guangrong.xiao
2018-03-27  9:10 ` [PATCH v2 02/10] migration: stop compression to allocate and free memory frequently guangrong.xiao
2018-03-27  9:10   ` [Qemu-devel] " guangrong.xiao
2018-03-28  9:25   ` Peter Xu
2018-03-28  9:25     ` [Qemu-devel] " Peter Xu
2018-03-29  3:41     ` Xiao Guangrong
2018-03-29  3:41       ` [Qemu-devel] " Xiao Guangrong
2018-03-27  9:10 ` guangrong.xiao [this message]
2018-03-27  9:10   ` [Qemu-devel] [PATCH v2 03/10] migration: stop decompression " guangrong.xiao
2018-03-28  9:42   ` Peter Xu
2018-03-28  9:42     ` [Qemu-devel] " Peter Xu
2018-03-29  3:43     ` Xiao Guangrong
2018-03-29  3:43       ` [Qemu-devel] " Xiao Guangrong
2018-03-29  4:14       ` Peter Xu
2018-03-29  4:14         ` [Qemu-devel] " Peter Xu
2018-03-27  9:10 ` [PATCH v2 04/10] migration: detect compression and decompression errors guangrong.xiao
2018-03-27  9:10   ` [Qemu-devel] " guangrong.xiao
2018-03-28  9:59   ` Peter Xu
2018-03-28  9:59     ` [Qemu-devel] " Peter Xu
2018-03-29  3:51     ` Xiao Guangrong
2018-03-29  3:51       ` [Qemu-devel] " Xiao Guangrong
2018-03-29  4:25       ` Peter Xu
2018-03-29  4:25         ` [Qemu-devel] " Peter Xu
2018-03-30  3:11         ` Xiao Guangrong
2018-03-30  3:11           ` [Qemu-devel] " Xiao Guangrong
2018-04-02  4:26           ` Peter Xu
2018-04-02  4:26             ` [Qemu-devel] " Peter Xu
2018-03-27  9:10 ` [PATCH v2 05/10] migration: introduce control_save_page() guangrong.xiao
2018-03-27  9:10   ` [Qemu-devel] " guangrong.xiao
2018-03-27  9:10 ` [PATCH v2 06/10] migration: move some code ram_save_host_page guangrong.xiao
2018-03-27  9:10   ` [Qemu-devel] " guangrong.xiao
2018-03-28 10:05   ` Peter Xu
2018-03-28 10:05     ` [Qemu-devel] " Peter Xu
2018-03-27  9:10 ` [PATCH v2 07/10] migration: move calling control_save_page to the common place guangrong.xiao
2018-03-27  9:10   ` [Qemu-devel] " guangrong.xiao
2018-03-27  9:10 ` [PATCH v2 08/10] migration: move calling save_zero_page " guangrong.xiao
2018-03-27  9:10   ` [Qemu-devel] " guangrong.xiao
2018-03-27  9:10 ` [PATCH v2 09/10] migration: introduce save_normal_page() guangrong.xiao
2018-03-27  9:10   ` [Qemu-devel] " guangrong.xiao
2018-03-27  9:10 ` [PATCH v2 10/10] migration: remove ram_save_compressed_page() guangrong.xiao
2018-03-27  9:10   ` [Qemu-devel] " guangrong.xiao

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180327091043.30220-4-xiaoguangrong@tencent.com \
    --to=guangrong.xiao@gmail.com \
    --cc=dgilbert@redhat.com \
    --cc=jiang.biao2@zte.com.cn \
    --cc=kvm@vger.kernel.org \
    --cc=mst@redhat.com \
    --cc=mtosatti@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=peterx@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=wei.w.wang@intel.com \
    --cc=xiaoguangrong@tencent.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.