From: Adam Ford <aford173@gmail.com>
To: adam.ford@logicpd.com
Cc: mark.rutland@arm.com, devicetree@vger.kernel.org,
tony@atomide.com, gregkh@linuxfoundation.org,
linux-usb@vger.kernel.org, linux@armlinux.org.uk,
robh+dt@kernel.org, bcousson@baylibre.com,
linux-omap@vger.kernel.org, Adam Ford <aford173@gmail.com>,
b-liu@ti.com, linux-arm-kernel@lists.infradead.org
Subject: [RFC 5/5] ARM: dts: am3517-evm: Enable MUSB on AM3517-evm
Date: Sun, 24 Jun 2018 19:12:33 -0500 [thread overview]
Message-ID: <20180625001233.9785-6-aford173@gmail.com> (raw)
In-Reply-To: <20180625001233.9785-1-aford173@gmail.com>
With AM35x now supported in device tree and the pdata-quirks
configuring the AM3517 clocks and some of the pin-mux,
this patch enables the MUSB and configures the rest of the pin-
mux options
Signed-off-by: Adam Ford <aford173@gmail.com>
diff --git a/arch/arm/boot/dts/am3517-evm.dts b/arch/arm/boot/dts/am3517-evm.dts
index 56fdec33afc1..4aeadaca915f 100644
--- a/arch/arm/boot/dts/am3517-evm.dts
+++ b/arch/arm/boot/dts/am3517-evm.dts
@@ -243,6 +243,12 @@
phys = <&hsusb1_phy>;
};
+&am35x_otg_hs {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&otg_drv_vbus>;
+};
+
&omap3_pmx_core {
pinctrl-names = "default";
pinctrl-0 = <&hsusb1_rst_pins>;
@@ -273,6 +279,12 @@
>;
};
+ otg_drv_vbus: pinmux_otg_drv_vbus {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2210, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_50MHz_clk.usb0_drvvbus */
+ >;
+ };
+
backlight_pins: pinmux_backlight_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x21de, PIN_OUTPUT | MUX_MODE4) /* mcspi2_cs1.gpio_182 */
--
2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: aford173@gmail.com
To: adam.ford@logicpd.com
Cc: bcousson@baylibre.com, tony@atomide.com, robh+dt@kernel.org,
mark.rutland@arm.com, linux@armlinux.org.uk, b-liu@ti.com,
gregkh@linuxfoundation.org, linux-omap@vger.kernel.org,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-usb@vger.kernel.org, Adam Ford <aford173@gmail.com>
Subject: [RFC,5/5] ARM: dts: am3517-evm: Enable MUSB on AM3517-evm
Date: Sun, 24 Jun 2018 19:12:33 -0500 [thread overview]
Message-ID: <20180625001233.9785-6-aford173@gmail.com> (raw)
With AM35x now supported in device tree and the pdata-quirks
configuring the AM3517 clocks and some of the pin-mux,
this patch enables the MUSB and configures the rest of the pin-
mux options
Signed-off-by: Adam Ford <aford173@gmail.com>
diff --git a/arch/arm/boot/dts/am3517-evm.dts b/arch/arm/boot/dts/am3517-evm.dts
index 56fdec33afc1..4aeadaca915f 100644
--- a/arch/arm/boot/dts/am3517-evm.dts
+++ b/arch/arm/boot/dts/am3517-evm.dts
@@ -243,6 +243,12 @@
phys = <&hsusb1_phy>;
};
+&am35x_otg_hs {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&otg_drv_vbus>;
+};
+
&omap3_pmx_core {
pinctrl-names = "default";
pinctrl-0 = <&hsusb1_rst_pins>;
@@ -273,6 +279,12 @@
>;
};
+ otg_drv_vbus: pinmux_otg_drv_vbus {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2210, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_50MHz_clk.usb0_drvvbus */
+ >;
+ };
+
backlight_pins: pinmux_backlight_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x21de, PIN_OUTPUT | MUX_MODE4) /* mcspi2_cs1.gpio_182 */
WARNING: multiple messages have this Message-ID (diff)
From: aford173@gmail.com (Adam Ford)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFC 5/5] ARM: dts: am3517-evm: Enable MUSB on AM3517-evm
Date: Sun, 24 Jun 2018 19:12:33 -0500 [thread overview]
Message-ID: <20180625001233.9785-6-aford173@gmail.com> (raw)
In-Reply-To: <20180625001233.9785-1-aford173@gmail.com>
With AM35x now supported in device tree and the pdata-quirks
configuring the AM3517 clocks and some of the pin-mux,
this patch enables the MUSB and configures the rest of the pin-
mux options
Signed-off-by: Adam Ford <aford173@gmail.com>
diff --git a/arch/arm/boot/dts/am3517-evm.dts b/arch/arm/boot/dts/am3517-evm.dts
index 56fdec33afc1..4aeadaca915f 100644
--- a/arch/arm/boot/dts/am3517-evm.dts
+++ b/arch/arm/boot/dts/am3517-evm.dts
@@ -243,6 +243,12 @@
phys = <&hsusb1_phy>;
};
+&am35x_otg_hs {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&otg_drv_vbus>;
+};
+
&omap3_pmx_core {
pinctrl-names = "default";
pinctrl-0 = <&hsusb1_rst_pins>;
@@ -273,6 +279,12 @@
>;
};
+ otg_drv_vbus: pinmux_otg_drv_vbus {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2210, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_50MHz_clk.usb0_drvvbus */
+ >;
+ };
+
backlight_pins: pinmux_backlight_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x21de, PIN_OUTPUT | MUX_MODE4) /* mcspi2_cs1.gpio_182 */
--
2.17.1
next prev parent reply other threads:[~2018-06-25 0:12 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-25 0:12 [RFC 0/5] Migrate AM35xx MUSB glue to device tree and enable MUSB Adam Ford
2018-06-25 0:12 ` Adam Ford
2018-06-25 0:12 ` [RFC 1/5] usb: musb: am35x: Add device tree support Adam Ford
2018-06-25 0:12 ` Adam Ford
2018-06-25 0:12 ` [RFC,1/5] " aford173
2018-06-25 0:12 ` [RFC 2/5] usb: musb: am35x: Match clock assignements to hwmods Adam Ford
2018-06-25 0:12 ` Adam Ford
2018-06-25 0:12 ` [RFC,2/5] " aford173
2018-06-25 0:12 ` [RFC 3/5] ARM: OMAP2+: Add AM3517 MUSB setup to pdata quirks Adam Ford
2018-06-25 0:12 ` Adam Ford
2018-06-25 0:12 ` [RFC,3/5] " aford173
2018-07-03 7:36 ` [RFC 3/5] " Tony Lindgren
2018-07-03 7:36 ` Tony Lindgren
2018-07-03 7:36 ` [RFC,3/5] " Tony Lindgren
2018-06-25 0:12 ` [RFC 4/5] ARM: dts: AM35x: Change MUSB from omap2430 to am35xx Adam Ford
2018-06-25 0:12 ` Adam Ford
2018-06-25 0:12 ` [RFC,4/5] " aford173
2018-06-25 0:12 ` Adam Ford [this message]
2018-06-25 0:12 ` [RFC 5/5] ARM: dts: am3517-evm: Enable MUSB on AM3517-evm Adam Ford
2018-06-25 0:12 ` [RFC,5/5] " aford173
2018-07-03 7:37 ` [RFC 0/5] Migrate AM35xx MUSB glue to device tree and enable MUSB Tony Lindgren
2018-07-03 7:37 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180625001233.9785-6-aford173@gmail.com \
--to=aford173@gmail.com \
--cc=adam.ford@logicpd.com \
--cc=b-liu@ti.com \
--cc=bcousson@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.