From: Miquel Raynal <miquel.raynal@bootlin.com>
To: Thomas Gleixner <tglx@linutronix.de>,
Jason Cooper <jason@lakedaemon.net>,
Marc Zyngier <marc.zyngier@arm.com>,
Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <will.deacon@arm.com>, Andrew Lunn <andrew@lunn.ch>,
Gregory Clement <gregory.clement@bootlin.com>,
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>,
devicetree@vger.kernel.org, Haim Boot <hayim@marvell.com>,
Antoine Tenart <antoine.tenart@bootlin.com>,
Hanna Hawa <hannah@marvell.com>,
Maxime Chevallier <maxime.chevallier@bootlin.com>,
Nadav Haklai <nadavh@marvell.com>,
Rob Herring <robh+dt@kernel.org>,
Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
Miquel Raynal <miquel.raynal@bootlin.com>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 13/14] arm64: dts: marvell: use new bindings for CP110 interrupts
Date: Thu, 5 Jul 2018 14:40:10 +0200 [thread overview]
Message-ID: <20180705124011.7661-14-miquel.raynal@bootlin.com> (raw)
In-Reply-To: <20180705124011.7661-1-miquel.raynal@bootlin.com>
Create an ICU subnode for the NSR interrupts. This subnode becomes the
CP110 interrupt parent, removing the need for the ICU_GRP_NSR parameter.
Move all DT110 nodes to use these new bindings.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
arch/arm64/boot/dts/marvell/armada-cp110.dtsi | 117 ++++++++++++++------------
1 file changed, 62 insertions(+), 55 deletions(-)
diff --git a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
index 1c6ff8197a88..823953e207e7 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
@@ -25,7 +25,7 @@
#address-cells = <2>;
#size-cells = <2>;
compatible = "simple-bus";
- interrupt-parent = <&CP110_LABEL(icu)>;
+ interrupt-parent = <&CP110_LABEL(icu_nsr)>;
ranges;
config-space@CP110_BASE {
@@ -47,12 +47,12 @@
dma-coherent;
CP110_LABEL(eth0): eth0 {
- interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 43 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 47 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 51 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 55 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 129 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <39 IRQ_TYPE_LEVEL_HIGH>,
+ <43 IRQ_TYPE_LEVEL_HIGH>,
+ <47 IRQ_TYPE_LEVEL_HIGH>,
+ <51 IRQ_TYPE_LEVEL_HIGH>,
+ <55 IRQ_TYPE_LEVEL_HIGH>,
+ <129 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
"tx-cpu3", "rx-shared", "link";
port-id = <0>;
@@ -61,12 +61,12 @@
};
CP110_LABEL(eth1): eth1 {
- interrupts = <ICU_GRP_NSR 40 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 44 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 48 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 52 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 56 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 128 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <40 IRQ_TYPE_LEVEL_HIGH>,
+ <44 IRQ_TYPE_LEVEL_HIGH>,
+ <48 IRQ_TYPE_LEVEL_HIGH>,
+ <52 IRQ_TYPE_LEVEL_HIGH>,
+ <56 IRQ_TYPE_LEVEL_HIGH>,
+ <128 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
"tx-cpu3", "rx-shared", "link";
port-id = <1>;
@@ -75,12 +75,12 @@
};
CP110_LABEL(eth2): eth2 {
- interrupts = <ICU_GRP_NSR 41 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 45 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 49 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 53 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 57 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 127 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <41 IRQ_TYPE_LEVEL_HIGH>,
+ <45 IRQ_TYPE_LEVEL_HIGH>,
+ <49 IRQ_TYPE_LEVEL_HIGH>,
+ <53 IRQ_TYPE_LEVEL_HIGH>,
+ <57 IRQ_TYPE_LEVEL_HIGH>,
+ <127 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
"tx-cpu3", "rx-shared", "link";
port-id = <2>;
@@ -150,16 +150,23 @@
CP110_LABEL(icu): interrupt-controller@1e0000 {
compatible = "marvell,cp110-icu";
reg = <0x1e0000 0x440>;
- #interrupt-cells = <3>;
- interrupt-controller;
- msi-parent = <&gicp>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ CP110_LABEL(icu_nsr): interrupt-controller@10 {
+ compatible = "marvell,cp110-icu-nsr";
+ reg = <0x10 0x20>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ msi-parent = <&gicp>;
+ };
};
CP110_LABEL(rtc): rtc@284000 {
compatible = "marvell,armada-8k-rtc";
reg = <0x284000 0x20>, <0x284080 0x24>;
reg-names = "rtc", "rtc-soc";
- interrupts = <ICU_GRP_NSR 77 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <77 IRQ_TYPE_LEVEL_HIGH>;
};
CP110_LABEL(thermal): thermal@400078 {
@@ -185,10 +192,10 @@
#gpio-cells = <2>;
gpio-ranges = <&CP110_LABEL(pinctrl) 0 0 32>;
interrupt-controller;
- interrupts = <ICU_GRP_NSR 86 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 85 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 84 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 83 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <86 IRQ_TYPE_LEVEL_HIGH>,
+ <85 IRQ_TYPE_LEVEL_HIGH>,
+ <84 IRQ_TYPE_LEVEL_HIGH>,
+ <83 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -200,10 +207,10 @@
#gpio-cells = <2>;
gpio-ranges = <&CP110_LABEL(pinctrl) 0 32 31>;
interrupt-controller;
- interrupts = <ICU_GRP_NSR 82 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 81 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 80 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 79 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <82 IRQ_TYPE_LEVEL_HIGH>,
+ <81 IRQ_TYPE_LEVEL_HIGH>,
+ <80 IRQ_TYPE_LEVEL_HIGH>,
+ <79 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
};
@@ -213,7 +220,7 @@
"generic-xhci";
reg = <0x500000 0x4000>;
dma-coherent;
- interrupts = <ICU_GRP_NSR 106 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <106 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "core", "reg";
clocks = <&CP110_LABEL(clk) 1 22>,
<&CP110_LABEL(clk) 1 16>;
@@ -225,7 +232,7 @@
"generic-xhci";
reg = <0x510000 0x4000>;
dma-coherent;
- interrupts = <ICU_GRP_NSR 105 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <105 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "core", "reg";
clocks = <&CP110_LABEL(clk) 1 23>,
<&CP110_LABEL(clk) 1 16>;
@@ -237,7 +244,7 @@
"generic-ahci";
reg = <0x540000 0x30000>;
dma-coherent;
- interrupts = <ICU_GRP_NSR 107 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&CP110_LABEL(clk) 1 15>,
<&CP110_LABEL(clk) 1 16>;
status = "disabled";
@@ -290,7 +297,7 @@
reg = <0x701000 0x20>;
#address-cells = <1>;
#size-cells = <0>;
- interrupts = <ICU_GRP_NSR 120 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <120 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "core", "reg";
clocks = <&CP110_LABEL(clk) 1 21>,
<&CP110_LABEL(clk) 1 17>;
@@ -302,7 +309,7 @@
reg = <0x701100 0x20>;
#address-cells = <1>;
#size-cells = <0>;
- interrupts = <ICU_GRP_NSR 121 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <121 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "core", "reg";
clocks = <&CP110_LABEL(clk) 1 21>,
<&CP110_LABEL(clk) 1 17>;
@@ -313,7 +320,7 @@
compatible = "snps,dw-apb-uart";
reg = <0x702000 0x100>;
reg-shift = <2>;
- interrupts = <ICU_GRP_NSR 122 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <122 IRQ_TYPE_LEVEL_HIGH>;
reg-io-width = <1>;
clock-names = "baudclk", "apb_pclk";
clocks = <&CP110_LABEL(clk) 1 21>,
@@ -325,7 +332,7 @@
compatible = "snps,dw-apb-uart";
reg = <0x702100 0x100>;
reg-shift = <2>;
- interrupts = <ICU_GRP_NSR 123 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <123 IRQ_TYPE_LEVEL_HIGH>;
reg-io-width = <1>;
clock-names = "baudclk", "apb_pclk";
clocks = <&CP110_LABEL(clk) 1 21>,
@@ -337,7 +344,7 @@
compatible = "snps,dw-apb-uart";
reg = <0x702200 0x100>;
reg-shift = <2>;
- interrupts = <ICU_GRP_NSR 124 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <124 IRQ_TYPE_LEVEL_HIGH>;
reg-io-width = <1>;
clock-names = "baudclk", "apb_pclk";
clocks = <&CP110_LABEL(clk) 1 21>,
@@ -349,7 +356,7 @@
compatible = "snps,dw-apb-uart";
reg = <0x702300 0x100>;
reg-shift = <2>;
- interrupts = <ICU_GRP_NSR 125 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <125 IRQ_TYPE_LEVEL_HIGH>;
reg-io-width = <1>;
clock-names = "baudclk", "apb_pclk";
clocks = <&CP110_LABEL(clk) 1 21>,
@@ -368,7 +375,7 @@
reg = <0x720000 0x54>;
#address-cells = <1>;
#size-cells = <0>;
- interrupts = <ICU_GRP_NSR 115 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <115 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "core", "reg";
clocks = <&CP110_LABEL(clk) 1 2>,
<&CP110_LABEL(clk) 1 17>;
@@ -380,7 +387,7 @@
compatible = "marvell,armada-8k-rng",
"inside-secure,safexcel-eip76";
reg = <0x760000 0x7d>;
- interrupts = <ICU_GRP_NSR 95 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <95 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "core", "reg";
clocks = <&CP110_LABEL(clk) 1 25>,
<&CP110_LABEL(clk) 1 17>;
@@ -390,7 +397,7 @@
CP110_LABEL(sdhci0): sdhci@780000 {
compatible = "marvell,armada-cp110-sdhci";
reg = <0x780000 0x300>;
- interrupts = <ICU_GRP_NSR 27 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "core", "axi";
clocks = <&CP110_LABEL(clk) 1 4>, <&CP110_LABEL(clk) 1 18>;
dma-coherent;
@@ -400,12 +407,12 @@
CP110_LABEL(crypto): crypto@800000 {
compatible = "inside-secure,safexcel-eip197";
reg = <0x800000 0x200000>;
- interrupts = <ICU_GRP_NSR 87 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 88 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 89 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 90 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 91 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 92 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <87 IRQ_TYPE_LEVEL_HIGH>,
+ <88 IRQ_TYPE_LEVEL_HIGH>,
+ <89 IRQ_TYPE_LEVEL_HIGH>,
+ <90 IRQ_TYPE_LEVEL_HIGH>,
+ <91 IRQ_TYPE_LEVEL_HIGH>,
+ <92 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "mem", "ring0", "ring1",
"ring2", "ring3", "eip";
clock-names = "core", "reg";
@@ -434,8 +441,8 @@
/* non-prefetchable memory */
0x82000000 0 CP110_PCIEx_MEM_BASE(0) 0 CP110_PCIEx_MEM_BASE(0) 0 0xf00000>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &CP110_LABEL(icu) ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>;
- interrupts = <ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map = <0 0 0 0 &CP110_LABEL(icu_nsr) 22 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
num-lanes = <1>;
clock-names = "core", "reg";
clocks = <&CP110_LABEL(clk) 1 13>, <&CP110_LABEL(clk) 1 14>;
@@ -461,8 +468,8 @@
/* non-prefetchable memory */
0x82000000 0 CP110_PCIEx_MEM_BASE(1) 0 CP110_PCIEx_MEM_BASE(1) 0 0xf00000>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &CP110_LABEL(icu) ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>;
- interrupts = <ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map = <0 0 0 0 &CP110_LABEL(icu_nsr) 24 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
num-lanes = <1>;
clock-names = "core", "reg";
@@ -489,8 +496,8 @@
/* non-prefetchable memory */
0x82000000 0 CP110_PCIEx_MEM_BASE(2) 0 CP110_PCIEx_MEM_BASE(2) 0 0xf00000>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &CP110_LABEL(icu) ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>;
- interrupts = <ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map = <0 0 0 0 &CP110_LABEL(icu_nsr) 23 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
num-lanes = <1>;
clock-names = "core", "reg";
--
2.14.1
WARNING: multiple messages have this Message-ID (diff)
From: miquel.raynal@bootlin.com (Miquel Raynal)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 13/14] arm64: dts: marvell: use new bindings for CP110 interrupts
Date: Thu, 5 Jul 2018 14:40:10 +0200 [thread overview]
Message-ID: <20180705124011.7661-14-miquel.raynal@bootlin.com> (raw)
In-Reply-To: <20180705124011.7661-1-miquel.raynal@bootlin.com>
Create an ICU subnode for the NSR interrupts. This subnode becomes the
CP110 interrupt parent, removing the need for the ICU_GRP_NSR parameter.
Move all DT110 nodes to use these new bindings.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
arch/arm64/boot/dts/marvell/armada-cp110.dtsi | 117 ++++++++++++++------------
1 file changed, 62 insertions(+), 55 deletions(-)
diff --git a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
index 1c6ff8197a88..823953e207e7 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
@@ -25,7 +25,7 @@
#address-cells = <2>;
#size-cells = <2>;
compatible = "simple-bus";
- interrupt-parent = <&CP110_LABEL(icu)>;
+ interrupt-parent = <&CP110_LABEL(icu_nsr)>;
ranges;
config-space at CP110_BASE {
@@ -47,12 +47,12 @@
dma-coherent;
CP110_LABEL(eth0): eth0 {
- interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 43 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 47 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 51 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 55 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 129 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <39 IRQ_TYPE_LEVEL_HIGH>,
+ <43 IRQ_TYPE_LEVEL_HIGH>,
+ <47 IRQ_TYPE_LEVEL_HIGH>,
+ <51 IRQ_TYPE_LEVEL_HIGH>,
+ <55 IRQ_TYPE_LEVEL_HIGH>,
+ <129 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
"tx-cpu3", "rx-shared", "link";
port-id = <0>;
@@ -61,12 +61,12 @@
};
CP110_LABEL(eth1): eth1 {
- interrupts = <ICU_GRP_NSR 40 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 44 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 48 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 52 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 56 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 128 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <40 IRQ_TYPE_LEVEL_HIGH>,
+ <44 IRQ_TYPE_LEVEL_HIGH>,
+ <48 IRQ_TYPE_LEVEL_HIGH>,
+ <52 IRQ_TYPE_LEVEL_HIGH>,
+ <56 IRQ_TYPE_LEVEL_HIGH>,
+ <128 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
"tx-cpu3", "rx-shared", "link";
port-id = <1>;
@@ -75,12 +75,12 @@
};
CP110_LABEL(eth2): eth2 {
- interrupts = <ICU_GRP_NSR 41 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 45 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 49 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 53 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 57 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 127 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <41 IRQ_TYPE_LEVEL_HIGH>,
+ <45 IRQ_TYPE_LEVEL_HIGH>,
+ <49 IRQ_TYPE_LEVEL_HIGH>,
+ <53 IRQ_TYPE_LEVEL_HIGH>,
+ <57 IRQ_TYPE_LEVEL_HIGH>,
+ <127 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
"tx-cpu3", "rx-shared", "link";
port-id = <2>;
@@ -150,16 +150,23 @@
CP110_LABEL(icu): interrupt-controller at 1e0000 {
compatible = "marvell,cp110-icu";
reg = <0x1e0000 0x440>;
- #interrupt-cells = <3>;
- interrupt-controller;
- msi-parent = <&gicp>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ CP110_LABEL(icu_nsr): interrupt-controller at 10 {
+ compatible = "marvell,cp110-icu-nsr";
+ reg = <0x10 0x20>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ msi-parent = <&gicp>;
+ };
};
CP110_LABEL(rtc): rtc at 284000 {
compatible = "marvell,armada-8k-rtc";
reg = <0x284000 0x20>, <0x284080 0x24>;
reg-names = "rtc", "rtc-soc";
- interrupts = <ICU_GRP_NSR 77 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <77 IRQ_TYPE_LEVEL_HIGH>;
};
CP110_LABEL(thermal): thermal at 400078 {
@@ -185,10 +192,10 @@
#gpio-cells = <2>;
gpio-ranges = <&CP110_LABEL(pinctrl) 0 0 32>;
interrupt-controller;
- interrupts = <ICU_GRP_NSR 86 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 85 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 84 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 83 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <86 IRQ_TYPE_LEVEL_HIGH>,
+ <85 IRQ_TYPE_LEVEL_HIGH>,
+ <84 IRQ_TYPE_LEVEL_HIGH>,
+ <83 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -200,10 +207,10 @@
#gpio-cells = <2>;
gpio-ranges = <&CP110_LABEL(pinctrl) 0 32 31>;
interrupt-controller;
- interrupts = <ICU_GRP_NSR 82 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 81 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 80 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 79 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <82 IRQ_TYPE_LEVEL_HIGH>,
+ <81 IRQ_TYPE_LEVEL_HIGH>,
+ <80 IRQ_TYPE_LEVEL_HIGH>,
+ <79 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
};
@@ -213,7 +220,7 @@
"generic-xhci";
reg = <0x500000 0x4000>;
dma-coherent;
- interrupts = <ICU_GRP_NSR 106 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <106 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "core", "reg";
clocks = <&CP110_LABEL(clk) 1 22>,
<&CP110_LABEL(clk) 1 16>;
@@ -225,7 +232,7 @@
"generic-xhci";
reg = <0x510000 0x4000>;
dma-coherent;
- interrupts = <ICU_GRP_NSR 105 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <105 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "core", "reg";
clocks = <&CP110_LABEL(clk) 1 23>,
<&CP110_LABEL(clk) 1 16>;
@@ -237,7 +244,7 @@
"generic-ahci";
reg = <0x540000 0x30000>;
dma-coherent;
- interrupts = <ICU_GRP_NSR 107 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&CP110_LABEL(clk) 1 15>,
<&CP110_LABEL(clk) 1 16>;
status = "disabled";
@@ -290,7 +297,7 @@
reg = <0x701000 0x20>;
#address-cells = <1>;
#size-cells = <0>;
- interrupts = <ICU_GRP_NSR 120 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <120 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "core", "reg";
clocks = <&CP110_LABEL(clk) 1 21>,
<&CP110_LABEL(clk) 1 17>;
@@ -302,7 +309,7 @@
reg = <0x701100 0x20>;
#address-cells = <1>;
#size-cells = <0>;
- interrupts = <ICU_GRP_NSR 121 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <121 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "core", "reg";
clocks = <&CP110_LABEL(clk) 1 21>,
<&CP110_LABEL(clk) 1 17>;
@@ -313,7 +320,7 @@
compatible = "snps,dw-apb-uart";
reg = <0x702000 0x100>;
reg-shift = <2>;
- interrupts = <ICU_GRP_NSR 122 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <122 IRQ_TYPE_LEVEL_HIGH>;
reg-io-width = <1>;
clock-names = "baudclk", "apb_pclk";
clocks = <&CP110_LABEL(clk) 1 21>,
@@ -325,7 +332,7 @@
compatible = "snps,dw-apb-uart";
reg = <0x702100 0x100>;
reg-shift = <2>;
- interrupts = <ICU_GRP_NSR 123 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <123 IRQ_TYPE_LEVEL_HIGH>;
reg-io-width = <1>;
clock-names = "baudclk", "apb_pclk";
clocks = <&CP110_LABEL(clk) 1 21>,
@@ -337,7 +344,7 @@
compatible = "snps,dw-apb-uart";
reg = <0x702200 0x100>;
reg-shift = <2>;
- interrupts = <ICU_GRP_NSR 124 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <124 IRQ_TYPE_LEVEL_HIGH>;
reg-io-width = <1>;
clock-names = "baudclk", "apb_pclk";
clocks = <&CP110_LABEL(clk) 1 21>,
@@ -349,7 +356,7 @@
compatible = "snps,dw-apb-uart";
reg = <0x702300 0x100>;
reg-shift = <2>;
- interrupts = <ICU_GRP_NSR 125 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <125 IRQ_TYPE_LEVEL_HIGH>;
reg-io-width = <1>;
clock-names = "baudclk", "apb_pclk";
clocks = <&CP110_LABEL(clk) 1 21>,
@@ -368,7 +375,7 @@
reg = <0x720000 0x54>;
#address-cells = <1>;
#size-cells = <0>;
- interrupts = <ICU_GRP_NSR 115 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <115 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "core", "reg";
clocks = <&CP110_LABEL(clk) 1 2>,
<&CP110_LABEL(clk) 1 17>;
@@ -380,7 +387,7 @@
compatible = "marvell,armada-8k-rng",
"inside-secure,safexcel-eip76";
reg = <0x760000 0x7d>;
- interrupts = <ICU_GRP_NSR 95 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <95 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "core", "reg";
clocks = <&CP110_LABEL(clk) 1 25>,
<&CP110_LABEL(clk) 1 17>;
@@ -390,7 +397,7 @@
CP110_LABEL(sdhci0): sdhci at 780000 {
compatible = "marvell,armada-cp110-sdhci";
reg = <0x780000 0x300>;
- interrupts = <ICU_GRP_NSR 27 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "core", "axi";
clocks = <&CP110_LABEL(clk) 1 4>, <&CP110_LABEL(clk) 1 18>;
dma-coherent;
@@ -400,12 +407,12 @@
CP110_LABEL(crypto): crypto at 800000 {
compatible = "inside-secure,safexcel-eip197";
reg = <0x800000 0x200000>;
- interrupts = <ICU_GRP_NSR 87 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 88 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 89 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 90 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 91 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 92 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <87 IRQ_TYPE_LEVEL_HIGH>,
+ <88 IRQ_TYPE_LEVEL_HIGH>,
+ <89 IRQ_TYPE_LEVEL_HIGH>,
+ <90 IRQ_TYPE_LEVEL_HIGH>,
+ <91 IRQ_TYPE_LEVEL_HIGH>,
+ <92 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "mem", "ring0", "ring1",
"ring2", "ring3", "eip";
clock-names = "core", "reg";
@@ -434,8 +441,8 @@
/* non-prefetchable memory */
0x82000000 0 CP110_PCIEx_MEM_BASE(0) 0 CP110_PCIEx_MEM_BASE(0) 0 0xf00000>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &CP110_LABEL(icu) ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>;
- interrupts = <ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map = <0 0 0 0 &CP110_LABEL(icu_nsr) 22 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
num-lanes = <1>;
clock-names = "core", "reg";
clocks = <&CP110_LABEL(clk) 1 13>, <&CP110_LABEL(clk) 1 14>;
@@ -461,8 +468,8 @@
/* non-prefetchable memory */
0x82000000 0 CP110_PCIEx_MEM_BASE(1) 0 CP110_PCIEx_MEM_BASE(1) 0 0xf00000>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &CP110_LABEL(icu) ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>;
- interrupts = <ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map = <0 0 0 0 &CP110_LABEL(icu_nsr) 24 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
num-lanes = <1>;
clock-names = "core", "reg";
@@ -489,8 +496,8 @@
/* non-prefetchable memory */
0x82000000 0 CP110_PCIEx_MEM_BASE(2) 0 CP110_PCIEx_MEM_BASE(2) 0 0xf00000>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &CP110_LABEL(icu) ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>;
- interrupts = <ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map = <0 0 0 0 &CP110_LABEL(icu_nsr) 23 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
num-lanes = <1>;
clock-names = "core", "reg";
--
2.14.1
next prev parent reply other threads:[~2018-07-05 12:40 UTC|newest]
Thread overview: 68+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-05 12:39 [PATCH v4 00/14] Add System Error Interrupt support to Armada SoCs Miquel Raynal
2018-07-05 12:39 ` Miquel Raynal
2018-07-05 12:39 ` [PATCH v4 01/14] genirq/msi: Allow creation of a tree-based irqdomain for platform-msi Miquel Raynal
2018-07-05 12:39 ` Miquel Raynal
2018-07-05 12:39 ` [PATCH v4 02/14] dt-bindings/interrupt-controller: fix Marvell ICU length in the example Miquel Raynal
2018-07-05 12:39 ` Miquel Raynal
2018-07-05 12:40 ` [PATCH v4 03/14] irqchip/irq-mvebu-icu: fix wrong private data retrieval Miquel Raynal
2018-07-05 12:40 ` Miquel Raynal
2018-07-05 12:40 ` [PATCH v4 04/14] irqchip/irq-mvebu-icu: clarify the reset operation of configured interrupts Miquel Raynal
2018-07-05 12:40 ` Miquel Raynal
2018-07-05 12:40 ` [PATCH v4 05/14] irqchip/irq-mvebu-icu: disociate ICU and NSR Miquel Raynal
2018-07-05 12:40 ` Miquel Raynal
2018-07-05 12:40 ` [PATCH v4 06/14] irqchip/irq-mvebu-icu: support ICU subnodes Miquel Raynal
2018-07-05 12:40 ` Miquel Raynal
2018-08-20 14:16 ` Marc Zyngier
2018-08-20 14:16 ` Marc Zyngier
2018-07-05 12:40 ` [PATCH v4 07/14] irqchip/irq-mvebu-sei: add new driver for Marvell SEI Miquel Raynal
2018-07-05 12:40 ` Miquel Raynal
2018-08-20 14:58 ` Marc Zyngier
2018-08-20 14:58 ` Marc Zyngier
2018-07-05 12:40 ` [PATCH v4 08/14] arm64: marvell: enable SEI driver Miquel Raynal
2018-07-05 12:40 ` Miquel Raynal
2018-07-05 12:40 ` [PATCH v4 09/14] irqchip/irq-mvebu-icu: add support for System Error Interrupts (SEI) Miquel Raynal
2018-07-05 12:40 ` Miquel Raynal
2018-08-20 15:21 ` Marc Zyngier
2018-08-20 15:21 ` Marc Zyngier
2018-08-21 9:08 ` Miquel Raynal
2018-08-21 9:08 ` Miquel Raynal
2018-08-21 9:19 ` Marc Zyngier
2018-08-21 9:19 ` Marc Zyngier
2018-08-21 10:28 ` Miquel Raynal
2018-08-21 10:28 ` Miquel Raynal
2018-08-21 10:37 ` Marc Zyngier
2018-08-21 10:37 ` Marc Zyngier
2018-08-21 15:41 ` Miquel Raynal
2018-08-21 15:41 ` Miquel Raynal
2018-08-23 11:44 ` Miquel Raynal
2018-08-23 11:44 ` Miquel Raynal
2018-07-05 12:40 ` [PATCH v4 10/14] dt-bindings/interrupt-controller: update Marvell ICU bindings Miquel Raynal
2018-07-05 12:40 ` Miquel Raynal
2018-07-16 15:27 ` Rob Herring
2018-07-16 15:27 ` Rob Herring
2018-07-16 16:39 ` Miquel Raynal
2018-07-16 16:39 ` Miquel Raynal
2018-07-16 17:44 ` Rob Herring
2018-07-16 17:44 ` Rob Herring
2018-07-16 19:30 ` Thomas Petazzoni
2018-07-16 19:30 ` Thomas Petazzoni
2018-07-16 19:38 ` Thomas Petazzoni
2018-07-16 19:38 ` Thomas Petazzoni
2018-07-05 12:40 ` [PATCH v4 11/14] dt-bindings/interrupt-controller: add documentation for Marvell SEI controller Miquel Raynal
2018-07-05 12:40 ` Miquel Raynal
2018-07-05 12:40 ` [PATCH v4 12/14] arm64: dts: marvell: add AP806 SEI subnode Miquel Raynal
2018-07-05 12:40 ` Miquel Raynal
2018-07-16 15:31 ` Rob Herring
2018-07-16 15:31 ` Rob Herring
2018-07-16 16:50 ` Miquel Raynal
2018-07-05 12:40 ` Miquel Raynal [this message]
2018-07-05 12:40 ` [PATCH v4 13/14] arm64: dts: marvell: use new bindings for CP110 interrupts Miquel Raynal
2018-07-05 12:40 ` [PATCH v4 14/14] arm64: dts: marvell: add CP110 ICU SEI subnode Miquel Raynal
2018-07-05 12:40 ` Miquel Raynal
2018-07-14 13:54 [PATCH 1/2] mtd: rawnand: marvell: document a bit more the driver Miquel Raynal
2018-07-14 13:54 ` [PATCH 2/2] Documentation: mtd: remove stale pxa3xx NAND controller documentation Miquel Raynal
2018-07-14 20:46 ` Thomas Petazzoni
2018-07-16 10:26 ` Miquel Raynal
2018-07-14 20:46 ` [PATCH 1/2] mtd: rawnand: marvell: document a bit more the driver Thomas Petazzoni
2018-07-16 10:31 ` Miquel Raynal
2018-07-17 12:09 ` Boris Brezillon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180705124011.7661-14-miquel.raynal@bootlin.com \
--to=miquel.raynal@bootlin.com \
--cc=andrew@lunn.ch \
--cc=antoine.tenart@bootlin.com \
--cc=catalin.marinas@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=gregory.clement@bootlin.com \
--cc=hannah@marvell.com \
--cc=hayim@marvell.com \
--cc=jason@lakedaemon.net \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=marc.zyngier@arm.com \
--cc=mark.rutland@arm.com \
--cc=maxime.chevallier@bootlin.com \
--cc=nadavh@marvell.com \
--cc=robh+dt@kernel.org \
--cc=sebastian.hesselbarth@gmail.com \
--cc=tglx@linutronix.de \
--cc=thomas.petazzoni@bootlin.com \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.