From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
To: dri-devel@lists.freedesktop.org
Cc: linux-renesas-soc@vger.kernel.org,
Takeshi Kihara <takeshi.kihara.df@renesas.com>
Subject: [PATCH 12/16] arm64: dts: renesas: r8a77990: Add I2C device nodes
Date: Tue, 4 Sep 2018 15:10:23 +0300 [thread overview]
Message-ID: <20180904121027.24031-13-laurent.pinchart+renesas@ideasonboard.com> (raw)
In-Reply-To: <20180904121027.24031-1-laurent.pinchart+renesas@ideasonboard.com>
From: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Add device nodes for I2C ch{0,1,2,3,4,5,6,7} to R-Car E3 R8A77990 device
tree.
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
---
arch/arm64/boot/dts/renesas/r8a77990.dtsi | 123 ++++++++++++++++++++++++++++++
1 file changed, 123 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
index ae89260baad9..abb14af76c0e 100644
--- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
@@ -14,6 +14,17 @@
#address-cells = <2>;
#size-cells = <2>;
+ aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c4 = &i2c4;
+ i2c5 = &i2c5;
+ i2c6 = &i2c6;
+ i2c7 = &i2c7;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -185,6 +196,118 @@
resets = <&cpg 906>;
};
+ i2c0: i2c@e6500000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a77990",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe6500000 0 0x40>;
+ interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 931>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 931>;
+ i2c-scl-internal-delay-ns = <110>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@e6508000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a77990",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe6508000 0 0x40>;
+ interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 930>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 930>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@e6510000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a77990",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe6510000 0 0x40>;
+ interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 929>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 929>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@e66d0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a77990",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe66d0000 0 0x40>;
+ interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 928>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 928>;
+ i2c-scl-internal-delay-ns = <110>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@e66d8000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a77990",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe66d8000 0 0x40>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 927>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 927>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c5: i2c@e66e0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a77990",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe66e0000 0 0x40>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 919>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 919>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c6: i2c@e66e8000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a77990",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe66e8000 0 0x40>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 918>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 918>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c7: i2c@e6690000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a77990",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe6690000 0 0x40>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 1003>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 1003>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
pfc: pin-controller@e6060000 {
compatible = "renesas,pfc-r8a77990";
reg = <0 0xe6060000 0 0x508>;
--
Regards,
Laurent Pinchart
WARNING: multiple messages have this Message-ID (diff)
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
To: dri-devel@lists.freedesktop.org
Cc: linux-renesas-soc@vger.kernel.org,
Takeshi Kihara <takeshi.kihara.df@renesas.com>
Subject: [PATCH 12/16] arm64: dts: renesas: r8a77990: Add I2C device nodes
Date: Tue, 4 Sep 2018 15:10:23 +0300 [thread overview]
Message-ID: <20180904121027.24031-13-laurent.pinchart+renesas@ideasonboard.com> (raw)
In-Reply-To: <20180904121027.24031-1-laurent.pinchart+renesas@ideasonboard.com>
From: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Add device nodes for I2C ch{0,1,2,3,4,5,6,7} to R-Car E3 R8A77990 device
tree.
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
---
arch/arm64/boot/dts/renesas/r8a77990.dtsi | 123 ++++++++++++++++++++++++++++++
1 file changed, 123 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
index ae89260baad9..abb14af76c0e 100644
--- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
@@ -14,6 +14,17 @@
#address-cells = <2>;
#size-cells = <2>;
+ aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c4 = &i2c4;
+ i2c5 = &i2c5;
+ i2c6 = &i2c6;
+ i2c7 = &i2c7;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -185,6 +196,118 @@
resets = <&cpg 906>;
};
+ i2c0: i2c@e6500000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a77990",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe6500000 0 0x40>;
+ interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 931>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 931>;
+ i2c-scl-internal-delay-ns = <110>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@e6508000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a77990",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe6508000 0 0x40>;
+ interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 930>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 930>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@e6510000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a77990",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe6510000 0 0x40>;
+ interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 929>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 929>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@e66d0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a77990",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe66d0000 0 0x40>;
+ interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 928>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 928>;
+ i2c-scl-internal-delay-ns = <110>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@e66d8000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a77990",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe66d8000 0 0x40>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 927>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 927>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c5: i2c@e66e0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a77990",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe66e0000 0 0x40>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 919>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 919>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c6: i2c@e66e8000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a77990",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe66e8000 0 0x40>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 918>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 918>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c7: i2c@e6690000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a77990",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe6690000 0 0x40>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 1003>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 1003>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
pfc: pin-controller@e6060000 {
compatible = "renesas,pfc-r8a77990";
reg = <0 0xe6060000 0 0x508>;
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2018-09-04 16:35 UTC|newest]
Thread overview: 86+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-04 12:10 [PATCH 00/16] R-Car D3/E3 display support (with LVDS PLL) Laurent Pinchart
2018-09-04 12:10 ` Laurent Pinchart
2018-09-04 12:10 ` [PATCH 01/16] dt-bindings: display: renesas: du: Document r8a77990 bindings Laurent Pinchart
2018-09-04 12:10 ` Laurent Pinchart
2018-09-14 7:56 ` jacopo mondi
2018-09-14 7:56 ` jacopo mondi
2018-09-17 5:44 ` Rob Herring
2018-09-04 12:10 ` [PATCH 02/16] dt-bindings: display: renesas: lvds: " Laurent Pinchart
2018-09-04 12:10 ` Laurent Pinchart
2018-09-14 7:57 ` jacopo mondi
2018-09-14 7:57 ` jacopo mondi
2018-09-17 5:44 ` Rob Herring
2018-09-04 12:10 ` [PATCH 03/16] dt-bindings: display: renesas: lvds: Add EXTAL and DU_DOTCLKIN clocks Laurent Pinchart
2018-09-04 12:10 ` Laurent Pinchart
2018-09-14 8:00 ` jacopo mondi
2018-09-14 8:00 ` jacopo mondi
2018-09-14 8:24 ` Laurent Pinchart
2018-09-14 8:24 ` Laurent Pinchart
2018-09-14 8:35 ` jacopo mondi
2018-09-14 8:35 ` jacopo mondi
2018-09-04 12:10 ` [PATCH 04/16] drm: bridge: thc63: Restrict modes based on hardware operating frequency Laurent Pinchart
2018-09-04 12:10 ` Laurent Pinchart
2018-09-11 13:31 ` jacopo mondi
2018-09-11 13:31 ` jacopo mondi
2018-09-13 21:08 ` Laurent Pinchart
2018-09-13 21:08 ` Laurent Pinchart
2018-09-13 12:36 ` Andrzej Hajda
2018-09-13 12:36 ` Andrzej Hajda
2018-09-04 12:10 ` [PATCH 05/16] drm: rcar-du: lvds: D3/E3 support Laurent Pinchart
2018-09-04 12:10 ` Laurent Pinchart
2018-09-04 14:29 ` Geert Uytterhoeven
2018-09-04 14:29 ` Geert Uytterhoeven
2018-09-05 14:01 ` Laurent Pinchart
2018-09-05 14:01 ` Laurent Pinchart
2018-09-11 13:23 ` jacopo mondi
2018-09-11 13:23 ` jacopo mondi
2018-09-13 21:14 ` Laurent Pinchart
2018-09-13 21:14 ` Laurent Pinchart
2018-09-04 12:10 ` [PATCH 06/16] drm: rcar-du: Perform the initial CRTC setup from rcar_du_crtc_get() Laurent Pinchart
2018-09-04 12:10 ` Laurent Pinchart
2018-09-07 18:19 ` jacopo mondi
2018-09-07 18:19 ` jacopo mondi
2018-09-09 16:44 ` Laurent Pinchart
2018-09-09 16:44 ` Laurent Pinchart
2018-09-04 12:10 ` [PATCH 07/16] drm: rcar-du: Use LVDS PLL clock as dot clock when possible Laurent Pinchart
2018-09-04 12:10 ` Laurent Pinchart
2018-09-11 14:59 ` jacopo mondi
2018-09-11 14:59 ` jacopo mondi
2018-09-13 21:17 ` Laurent Pinchart
2018-09-13 21:17 ` Laurent Pinchart
2018-09-04 12:10 ` [PATCH 08/16] drm: rcar-du: Enable configurable DPAD0 routing on Gen3 Laurent Pinchart
2018-09-04 12:10 ` Laurent Pinchart
2018-09-11 15:46 ` jacopo mondi
2018-09-11 15:46 ` jacopo mondi
2018-09-13 21:25 ` Laurent Pinchart
2018-09-13 21:25 ` Laurent Pinchart
2018-09-04 12:10 ` [PATCH 09/16] drm: rcar-du: Cache DSYSR value to ensure known initial value Laurent Pinchart
2018-09-04 12:10 ` Laurent Pinchart
2018-09-04 12:10 ` [PATCH 10/16] drm: rcar-du: Don't use TV sync mode when not supported by the hardware Laurent Pinchart
2018-09-04 12:10 ` Laurent Pinchart
2018-09-04 12:10 ` [PATCH 11/16] drm: rcar-du: Add r8a77990 and r8a77995 device support Laurent Pinchart
2018-09-04 12:10 ` Laurent Pinchart
2018-09-04 12:10 ` Laurent Pinchart [this message]
2018-09-04 12:10 ` [PATCH 12/16] arm64: dts: renesas: r8a77990: Add I2C device nodes Laurent Pinchart
2018-09-04 14:32 ` Geert Uytterhoeven
2018-09-04 14:32 ` Geert Uytterhoeven
2018-09-04 14:49 ` jacopo mondi
2018-09-04 14:49 ` jacopo mondi
2018-09-05 13:53 ` Laurent Pinchart
2018-09-05 13:53 ` Laurent Pinchart
2018-09-06 9:26 ` Simon Horman
2018-09-06 9:26 ` Simon Horman
2018-09-06 9:48 ` Laurent Pinchart
2018-09-06 9:48 ` Laurent Pinchart
2018-09-05 13:52 ` Laurent Pinchart
2018-09-05 13:52 ` Laurent Pinchart
2018-09-04 12:10 ` [PATCH 13/16] arm64: dts: renesas: r8a77990: Add display output support Laurent Pinchart
2018-09-04 12:10 ` Laurent Pinchart
2018-09-04 12:10 ` [PATCH 14/16] arm64: dts: renesas: r8a77995: Add LVDS support Laurent Pinchart
2018-09-04 12:10 ` Laurent Pinchart
2018-09-04 12:10 ` [PATCH 15/16] arm64: dts: renesas: r8a77990: ebisu: Enable VGA and HDMI outputs Laurent Pinchart
2018-09-04 12:10 ` Laurent Pinchart
2018-09-04 12:10 ` [PATCH 16/16] arm64: dts: renesas: r8a77995: draak: Enable HDMI display output Laurent Pinchart
2018-09-04 12:10 ` Laurent Pinchart
2018-09-05 16:22 ` [PATCH 00/16] R-Car D3/E3 display support (with LVDS PLL) jacopo mondi
2018-09-05 16:22 ` jacopo mondi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180904121027.24031-13-laurent.pinchart+renesas@ideasonboard.com \
--to=laurent.pinchart+renesas@ideasonboard.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=takeshi.kihara.df@renesas.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.