From: Yu-cheng Yu <yu-cheng.yu@intel.com>
To: x86@kernel.org, "H. Peter Anvin" <hpa@zytor.com>,
Thomas Gleixner <tglx@linutronix.de>,
Ingo Molnar <mingo@redhat.com>,
linux-kernel@vger.kernel.org, linux-doc@vger.kernel.org,
linux-mm@kvack.org, linux-arch@vger.kernel.org,
linux-api@vger.kernel.org, Arnd Bergmann <arnd@arndb.de>,
Andy Lutomirski <luto@amacapital.net>,
Balbir Singh <bsingharora@gmail.com>,
Cyrill Gorcunov <gorcunov@gmail.com>,
Dave Hansen <dave.hansen@linux.intel.com>,
Florian Weimer <fweimer@redhat.com>,
"H.J. Lu" <hjl.tools@gmail.com>, Jann Horn <jannh@google.com>,
Jonathan Corbet <corbet@lwn.net>,
Kees Cook <keescook@chromium.org>,
Mike Kravetz <mike.kravetz@oracle.com>,
Nadav Amit <nadav.amit@gmail.com>,
Oleg Nesterov <oleg@redhat.com>, Pavel Machek <pavel@ucw.cz>,
Peter Zijlstra <peterz@infradead.org>,
Randy Dunlap <rdunlap@infradead.org>,
"Ravi V. Shankar" <ravi.v.shankar@intel.com>,
Vedvyas Shanbhogue <vedvyas.shanbhogue@intel.com>
Cc: Yu-cheng Yu <yu-cheng.yu@intel.com>
Subject: [RFC PATCH v4 27/27] x86/cet/shstk: Add Shadow Stack instructions to opcode map
Date: Fri, 21 Sep 2018 08:03:51 -0700 [thread overview]
Message-ID: <20180921150351.20898-28-yu-cheng.yu@intel.com> (raw)
In-Reply-To: <20180921150351.20898-1-yu-cheng.yu@intel.com>
Add the following shadow stack management instructions.
INCSSP:
Increment shadow stack pointer by the steps specified.
RDSSP:
Read SSP register into a GPR.
SAVEPREVSSP:
Use "prev ssp" token at top of current shadow stack to
create a "restore token" on previous shadow stack.
RSTORSSP:
Restore from a "restore token" pointed by a GPR to SSP.
WRSS:
Write to kernel-mode shadow stack (kernel-mode instruction).
WRUSS:
Write to user-mode shadow stack (kernel-mode instruction).
SETSSBSY:
Verify the "supervisor token" pointed by IA32_PL0_SSP MSR,
if valid, set the token to busy, and set SSP to the value
of IA32_PL0_SSP MSR.
CLRSSBSY:
Verify the "supervisor token" pointed by a GPR, if valid,
clear the busy bit from the token.
Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com>
---
arch/x86/lib/x86-opcode-map.txt | 26 +++++++++++++------
tools/objtool/arch/x86/lib/x86-opcode-map.txt | 26 +++++++++++++------
2 files changed, 36 insertions(+), 16 deletions(-)
diff --git a/arch/x86/lib/x86-opcode-map.txt b/arch/x86/lib/x86-opcode-map.txt
index e0b85930dd77..c5e825d44766 100644
--- a/arch/x86/lib/x86-opcode-map.txt
+++ b/arch/x86/lib/x86-opcode-map.txt
@@ -366,7 +366,7 @@ AVXcode: 1
1b: BNDCN Gv,Ev (F2) | BNDMOV Ev,Gv (66) | BNDMK Gv,Ev (F3) | BNDSTX Ev,Gv
1c:
1d:
-1e:
+1e: RDSSP Rd (F3),REX.W
1f: NOP Ev
# 0x0f 0x20-0x2f
20: MOV Rd,Cd
@@ -610,7 +610,17 @@ fe: paddd Pq,Qq | vpaddd Vx,Hx,Wx (66),(v1)
ff: UD0
EndTable
-Table: 3-byte opcode 1 (0x0f 0x38)
+Table: 3-byte opcode 1 (0x0f 0x01)
+Referrer:
+AVXcode:
+# Skip 0x00-0xe7
+e8: SETSSBSY (f3)
+e9:
+ea: SAVEPREVSSP (f3)
+# Skip 0xeb-0xff
+EndTable
+
+Table: 3-byte opcode 2 (0x0f 0x38)
Referrer: 3-byte escape 1
AVXcode: 2
# 0x0f 0x38 0x00-0x0f
@@ -789,12 +799,12 @@ f0: MOVBE Gy,My | MOVBE Gw,Mw (66) | CRC32 Gd,Eb (F2) | CRC32 Gd,Eb (66&F2)
f1: MOVBE My,Gy | MOVBE Mw,Gw (66) | CRC32 Gd,Ey (F2) | CRC32 Gd,Ew (66&F2)
f2: ANDN Gy,By,Ey (v)
f3: Grp17 (1A)
-f5: BZHI Gy,Ey,By (v) | PEXT Gy,By,Ey (F3),(v) | PDEP Gy,By,Ey (F2),(v)
-f6: ADCX Gy,Ey (66) | ADOX Gy,Ey (F3) | MULX By,Gy,rDX,Ey (F2),(v)
+f5: BZHI Gy,Ey,By (v) | PEXT Gy,By,Ey (F3),(v) | PDEP Gy,By,Ey (F2),(v) | WRUSS Pq,Qq (66),REX.W
+f6: ADCX Gy,Ey (66) | ADOX Gy,Ey (F3) | MULX By,Gy,rDX,Ey (F2),(v) | WRSS Pq,Qq (66),REX.W
f7: BEXTR Gy,Ey,By (v) | SHLX Gy,Ey,By (66),(v) | SARX Gy,Ey,By (F3),(v) | SHRX Gy,Ey,By (F2),(v)
EndTable
-Table: 3-byte opcode 2 (0x0f 0x3a)
+Table: 3-byte opcode 3 (0x0f 0x3a)
Referrer: 3-byte escape 2
AVXcode: 3
# 0x0f 0x3a 0x00-0xff
@@ -948,7 +958,7 @@ GrpTable: Grp7
2: LGDT Ms | XGETBV (000),(11B) | XSETBV (001),(11B) | VMFUNC (100),(11B) | XEND (101)(11B) | XTEST (110)(11B)
3: LIDT Ms
4: SMSW Mw/Rv
-5: rdpkru (110),(11B) | wrpkru (111),(11B)
+5: rdpkru (110),(11B) | wrpkru (111),(11B) | RSTORSSP Mq (F3)
6: LMSW Ew
7: INVLPG Mb | SWAPGS (o64),(000),(11B) | RDTSCP (001),(11B)
EndTable
@@ -1019,8 +1029,8 @@ GrpTable: Grp15
2: vldmxcsr Md (v1) | WRFSBASE Ry (F3),(11B)
3: vstmxcsr Md (v1) | WRGSBASE Ry (F3),(11B)
4: XSAVE | ptwrite Ey (F3),(11B)
-5: XRSTOR | lfence (11B)
-6: XSAVEOPT | clwb (66) | mfence (11B)
+5: XRSTOR | lfence (11B) | INCSSP Rd (F3),REX.W
+6: XSAVEOPT | clwb (66) | mfence (11B) | CLRSSBSY Mq (F3)
7: clflush | clflushopt (66) | sfence (11B)
EndTable
diff --git a/tools/objtool/arch/x86/lib/x86-opcode-map.txt b/tools/objtool/arch/x86/lib/x86-opcode-map.txt
index e0b85930dd77..c5e825d44766 100644
--- a/tools/objtool/arch/x86/lib/x86-opcode-map.txt
+++ b/tools/objtool/arch/x86/lib/x86-opcode-map.txt
@@ -366,7 +366,7 @@ AVXcode: 1
1b: BNDCN Gv,Ev (F2) | BNDMOV Ev,Gv (66) | BNDMK Gv,Ev (F3) | BNDSTX Ev,Gv
1c:
1d:
-1e:
+1e: RDSSP Rd (F3),REX.W
1f: NOP Ev
# 0x0f 0x20-0x2f
20: MOV Rd,Cd
@@ -610,7 +610,17 @@ fe: paddd Pq,Qq | vpaddd Vx,Hx,Wx (66),(v1)
ff: UD0
EndTable
-Table: 3-byte opcode 1 (0x0f 0x38)
+Table: 3-byte opcode 1 (0x0f 0x01)
+Referrer:
+AVXcode:
+# Skip 0x00-0xe7
+e8: SETSSBSY (f3)
+e9:
+ea: SAVEPREVSSP (f3)
+# Skip 0xeb-0xff
+EndTable
+
+Table: 3-byte opcode 2 (0x0f 0x38)
Referrer: 3-byte escape 1
AVXcode: 2
# 0x0f 0x38 0x00-0x0f
@@ -789,12 +799,12 @@ f0: MOVBE Gy,My | MOVBE Gw,Mw (66) | CRC32 Gd,Eb (F2) | CRC32 Gd,Eb (66&F2)
f1: MOVBE My,Gy | MOVBE Mw,Gw (66) | CRC32 Gd,Ey (F2) | CRC32 Gd,Ew (66&F2)
f2: ANDN Gy,By,Ey (v)
f3: Grp17 (1A)
-f5: BZHI Gy,Ey,By (v) | PEXT Gy,By,Ey (F3),(v) | PDEP Gy,By,Ey (F2),(v)
-f6: ADCX Gy,Ey (66) | ADOX Gy,Ey (F3) | MULX By,Gy,rDX,Ey (F2),(v)
+f5: BZHI Gy,Ey,By (v) | PEXT Gy,By,Ey (F3),(v) | PDEP Gy,By,Ey (F2),(v) | WRUSS Pq,Qq (66),REX.W
+f6: ADCX Gy,Ey (66) | ADOX Gy,Ey (F3) | MULX By,Gy,rDX,Ey (F2),(v) | WRSS Pq,Qq (66),REX.W
f7: BEXTR Gy,Ey,By (v) | SHLX Gy,Ey,By (66),(v) | SARX Gy,Ey,By (F3),(v) | SHRX Gy,Ey,By (F2),(v)
EndTable
-Table: 3-byte opcode 2 (0x0f 0x3a)
+Table: 3-byte opcode 3 (0x0f 0x3a)
Referrer: 3-byte escape 2
AVXcode: 3
# 0x0f 0x3a 0x00-0xff
@@ -948,7 +958,7 @@ GrpTable: Grp7
2: LGDT Ms | XGETBV (000),(11B) | XSETBV (001),(11B) | VMFUNC (100),(11B) | XEND (101)(11B) | XTEST (110)(11B)
3: LIDT Ms
4: SMSW Mw/Rv
-5: rdpkru (110),(11B) | wrpkru (111),(11B)
+5: rdpkru (110),(11B) | wrpkru (111),(11B) | RSTORSSP Mq (F3)
6: LMSW Ew
7: INVLPG Mb | SWAPGS (o64),(000),(11B) | RDTSCP (001),(11B)
EndTable
@@ -1019,8 +1029,8 @@ GrpTable: Grp15
2: vldmxcsr Md (v1) | WRFSBASE Ry (F3),(11B)
3: vstmxcsr Md (v1) | WRGSBASE Ry (F3),(11B)
4: XSAVE | ptwrite Ey (F3),(11B)
-5: XRSTOR | lfence (11B)
-6: XSAVEOPT | clwb (66) | mfence (11B)
+5: XRSTOR | lfence (11B) | INCSSP Rd (F3),REX.W
+6: XSAVEOPT | clwb (66) | mfence (11B) | CLRSSBSY Mq (F3)
7: clflush | clflushopt (66) | sfence (11B)
EndTable
--
2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Yu-cheng Yu <yu-cheng.yu@intel.com>
To: x86@kernel.org, "H. Peter Anvin" <hpa@zytor.com>,
Thomas Gleixner <tglx@linutronix.de>,
Ingo Molnar <mingo@redhat.com>,
linux-kernel@vger.kernel.org, linux-doc@vger.kernel.org,
linux-mm@kvack.org, linux-arch@vger.kernel.org,
linux-api@vger.kernel.org, Arnd Bergmann <arnd@arndb.de>,
Andy Lutomirski <luto@amacapital.net>,
Balbir Singh <bsingharora@gmail.com>,
Cyrill Gorcunov <gorcunov@gmail.com>,
Dave Hansen <dave.hansen@linux.intel.com>,
Florian Weimer <fweimer@redhat.com>,
"H.J. Lu" <hjl.tools@gmail.com>, Jann Horn <jannh@google.com>,
Jonathan Corbet <corbet@lwn.net>,
Kees Cook <keescook@chromium.org>,
Mike Kravetz <mike.kravetz@oracle.com>,
Nadav Amit <nadav.amit@gmail.com>,
Oleg Nesterov <oleg@redhat.com>,
Pavel Machek <pavel@ucw.cz>Peter
Cc: Yu-cheng Yu <yu-cheng.yu@intel.com>
Subject: [RFC PATCH v4 27/27] x86/cet/shstk: Add Shadow Stack instructions to opcode map
Date: Fri, 21 Sep 2018 08:03:51 -0700 [thread overview]
Message-ID: <20180921150351.20898-28-yu-cheng.yu@intel.com> (raw)
In-Reply-To: <20180921150351.20898-1-yu-cheng.yu@intel.com>
Add the following shadow stack management instructions.
INCSSP:
Increment shadow stack pointer by the steps specified.
RDSSP:
Read SSP register into a GPR.
SAVEPREVSSP:
Use "prev ssp" token at top of current shadow stack to
create a "restore token" on previous shadow stack.
RSTORSSP:
Restore from a "restore token" pointed by a GPR to SSP.
WRSS:
Write to kernel-mode shadow stack (kernel-mode instruction).
WRUSS:
Write to user-mode shadow stack (kernel-mode instruction).
SETSSBSY:
Verify the "supervisor token" pointed by IA32_PL0_SSP MSR,
if valid, set the token to busy, and set SSP to the value
of IA32_PL0_SSP MSR.
CLRSSBSY:
Verify the "supervisor token" pointed by a GPR, if valid,
clear the busy bit from the token.
Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com>
---
arch/x86/lib/x86-opcode-map.txt | 26 +++++++++++++------
tools/objtool/arch/x86/lib/x86-opcode-map.txt | 26 +++++++++++++------
2 files changed, 36 insertions(+), 16 deletions(-)
diff --git a/arch/x86/lib/x86-opcode-map.txt b/arch/x86/lib/x86-opcode-map.txt
index e0b85930dd77..c5e825d44766 100644
--- a/arch/x86/lib/x86-opcode-map.txt
+++ b/arch/x86/lib/x86-opcode-map.txt
@@ -366,7 +366,7 @@ AVXcode: 1
1b: BNDCN Gv,Ev (F2) | BNDMOV Ev,Gv (66) | BNDMK Gv,Ev (F3) | BNDSTX Ev,Gv
1c:
1d:
-1e:
+1e: RDSSP Rd (F3),REX.W
1f: NOP Ev
# 0x0f 0x20-0x2f
20: MOV Rd,Cd
@@ -610,7 +610,17 @@ fe: paddd Pq,Qq | vpaddd Vx,Hx,Wx (66),(v1)
ff: UD0
EndTable
-Table: 3-byte opcode 1 (0x0f 0x38)
+Table: 3-byte opcode 1 (0x0f 0x01)
+Referrer:
+AVXcode:
+# Skip 0x00-0xe7
+e8: SETSSBSY (f3)
+e9:
+ea: SAVEPREVSSP (f3)
+# Skip 0xeb-0xff
+EndTable
+
+Table: 3-byte opcode 2 (0x0f 0x38)
Referrer: 3-byte escape 1
AVXcode: 2
# 0x0f 0x38 0x00-0x0f
@@ -789,12 +799,12 @@ f0: MOVBE Gy,My | MOVBE Gw,Mw (66) | CRC32 Gd,Eb (F2) | CRC32 Gd,Eb (66&F2)
f1: MOVBE My,Gy | MOVBE Mw,Gw (66) | CRC32 Gd,Ey (F2) | CRC32 Gd,Ew (66&F2)
f2: ANDN Gy,By,Ey (v)
f3: Grp17 (1A)
-f5: BZHI Gy,Ey,By (v) | PEXT Gy,By,Ey (F3),(v) | PDEP Gy,By,Ey (F2),(v)
-f6: ADCX Gy,Ey (66) | ADOX Gy,Ey (F3) | MULX By,Gy,rDX,Ey (F2),(v)
+f5: BZHI Gy,Ey,By (v) | PEXT Gy,By,Ey (F3),(v) | PDEP Gy,By,Ey (F2),(v) | WRUSS Pq,Qq (66),REX.W
+f6: ADCX Gy,Ey (66) | ADOX Gy,Ey (F3) | MULX By,Gy,rDX,Ey (F2),(v) | WRSS Pq,Qq (66),REX.W
f7: BEXTR Gy,Ey,By (v) | SHLX Gy,Ey,By (66),(v) | SARX Gy,Ey,By (F3),(v) | SHRX Gy,Ey,By (F2),(v)
EndTable
-Table: 3-byte opcode 2 (0x0f 0x3a)
+Table: 3-byte opcode 3 (0x0f 0x3a)
Referrer: 3-byte escape 2
AVXcode: 3
# 0x0f 0x3a 0x00-0xff
@@ -948,7 +958,7 @@ GrpTable: Grp7
2: LGDT Ms | XGETBV (000),(11B) | XSETBV (001),(11B) | VMFUNC (100),(11B) | XEND (101)(11B) | XTEST (110)(11B)
3: LIDT Ms
4: SMSW Mw/Rv
-5: rdpkru (110),(11B) | wrpkru (111),(11B)
+5: rdpkru (110),(11B) | wrpkru (111),(11B) | RSTORSSP Mq (F3)
6: LMSW Ew
7: INVLPG Mb | SWAPGS (o64),(000),(11B) | RDTSCP (001),(11B)
EndTable
@@ -1019,8 +1029,8 @@ GrpTable: Grp15
2: vldmxcsr Md (v1) | WRFSBASE Ry (F3),(11B)
3: vstmxcsr Md (v1) | WRGSBASE Ry (F3),(11B)
4: XSAVE | ptwrite Ey (F3),(11B)
-5: XRSTOR | lfence (11B)
-6: XSAVEOPT | clwb (66) | mfence (11B)
+5: XRSTOR | lfence (11B) | INCSSP Rd (F3),REX.W
+6: XSAVEOPT | clwb (66) | mfence (11B) | CLRSSBSY Mq (F3)
7: clflush | clflushopt (66) | sfence (11B)
EndTable
diff --git a/tools/objtool/arch/x86/lib/x86-opcode-map.txt b/tools/objtool/arch/x86/lib/x86-opcode-map.txt
index e0b85930dd77..c5e825d44766 100644
--- a/tools/objtool/arch/x86/lib/x86-opcode-map.txt
+++ b/tools/objtool/arch/x86/lib/x86-opcode-map.txt
@@ -366,7 +366,7 @@ AVXcode: 1
1b: BNDCN Gv,Ev (F2) | BNDMOV Ev,Gv (66) | BNDMK Gv,Ev (F3) | BNDSTX Ev,Gv
1c:
1d:
-1e:
+1e: RDSSP Rd (F3),REX.W
1f: NOP Ev
# 0x0f 0x20-0x2f
20: MOV Rd,Cd
@@ -610,7 +610,17 @@ fe: paddd Pq,Qq | vpaddd Vx,Hx,Wx (66),(v1)
ff: UD0
EndTable
-Table: 3-byte opcode 1 (0x0f 0x38)
+Table: 3-byte opcode 1 (0x0f 0x01)
+Referrer:
+AVXcode:
+# Skip 0x00-0xe7
+e8: SETSSBSY (f3)
+e9:
+ea: SAVEPREVSSP (f3)
+# Skip 0xeb-0xff
+EndTable
+
+Table: 3-byte opcode 2 (0x0f 0x38)
Referrer: 3-byte escape 1
AVXcode: 2
# 0x0f 0x38 0x00-0x0f
@@ -789,12 +799,12 @@ f0: MOVBE Gy,My | MOVBE Gw,Mw (66) | CRC32 Gd,Eb (F2) | CRC32 Gd,Eb (66&F2)
f1: MOVBE My,Gy | MOVBE Mw,Gw (66) | CRC32 Gd,Ey (F2) | CRC32 Gd,Ew (66&F2)
f2: ANDN Gy,By,Ey (v)
f3: Grp17 (1A)
-f5: BZHI Gy,Ey,By (v) | PEXT Gy,By,Ey (F3),(v) | PDEP Gy,By,Ey (F2),(v)
-f6: ADCX Gy,Ey (66) | ADOX Gy,Ey (F3) | MULX By,Gy,rDX,Ey (F2),(v)
+f5: BZHI Gy,Ey,By (v) | PEXT Gy,By,Ey (F3),(v) | PDEP Gy,By,Ey (F2),(v) | WRUSS Pq,Qq (66),REX.W
+f6: ADCX Gy,Ey (66) | ADOX Gy,Ey (F3) | MULX By,Gy,rDX,Ey (F2),(v) | WRSS Pq,Qq (66),REX.W
f7: BEXTR Gy,Ey,By (v) | SHLX Gy,Ey,By (66),(v) | SARX Gy,Ey,By (F3),(v) | SHRX Gy,Ey,By (F2),(v)
EndTable
-Table: 3-byte opcode 2 (0x0f 0x3a)
+Table: 3-byte opcode 3 (0x0f 0x3a)
Referrer: 3-byte escape 2
AVXcode: 3
# 0x0f 0x3a 0x00-0xff
@@ -948,7 +958,7 @@ GrpTable: Grp7
2: LGDT Ms | XGETBV (000),(11B) | XSETBV (001),(11B) | VMFUNC (100),(11B) | XEND (101)(11B) | XTEST (110)(11B)
3: LIDT Ms
4: SMSW Mw/Rv
-5: rdpkru (110),(11B) | wrpkru (111),(11B)
+5: rdpkru (110),(11B) | wrpkru (111),(11B) | RSTORSSP Mq (F3)
6: LMSW Ew
7: INVLPG Mb | SWAPGS (o64),(000),(11B) | RDTSCP (001),(11B)
EndTable
@@ -1019,8 +1029,8 @@ GrpTable: Grp15
2: vldmxcsr Md (v1) | WRFSBASE Ry (F3),(11B)
3: vstmxcsr Md (v1) | WRGSBASE Ry (F3),(11B)
4: XSAVE | ptwrite Ey (F3),(11B)
-5: XRSTOR | lfence (11B)
-6: XSAVEOPT | clwb (66) | mfence (11B)
+5: XRSTOR | lfence (11B) | INCSSP Rd (F3),REX.W
+6: XSAVEOPT | clwb (66) | mfence (11B) | CLRSSBSY Mq (F3)
7: clflush | clflushopt (66) | sfence (11B)
EndTable
--
2.17.1
next prev parent reply other threads:[~2018-09-21 15:11 UTC|newest]
Thread overview: 145+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-21 15:03 [RFC PATCH v4 00/27] Control Flow Enforcement: Shadow Stack Yu-cheng Yu
2018-09-21 15:03 ` Yu-cheng Yu
2018-09-21 15:03 ` [RFC PATCH v4 01/27] x86/cpufeatures: Add CPUIDs for Control-flow Enforcement Technology (CET) Yu-cheng Yu
2018-09-21 15:03 ` Yu-cheng Yu
2018-09-25 16:27 ` Peter Zijlstra
2018-09-25 16:27 ` Peter Zijlstra
2018-09-25 16:29 ` Yu-cheng Yu
2018-09-25 16:29 ` Yu-cheng Yu
2018-09-28 16:51 ` Borislav Petkov
2018-09-28 16:51 ` Borislav Petkov
2018-09-28 16:56 ` Yu-cheng Yu
2018-09-28 16:56 ` Yu-cheng Yu
2018-09-21 15:03 ` [RFC PATCH v4 02/27] x86/fpu/xstate: Change some names to separate XSAVES system and user states Yu-cheng Yu
2018-09-21 15:03 ` Yu-cheng Yu
2018-09-25 16:37 ` Peter Zijlstra
2018-09-25 16:37 ` Peter Zijlstra
2018-10-02 15:29 ` Borislav Petkov
2018-10-02 15:29 ` Borislav Petkov
2018-10-02 15:29 ` Borislav Petkov
2018-10-02 16:21 ` Yu-cheng Yu
2018-10-02 16:21 ` Yu-cheng Yu
2018-10-02 16:21 ` Yu-cheng Yu
2018-10-02 16:30 ` Dave Hansen
2018-10-02 16:30 ` Dave Hansen
2018-10-02 16:30 ` Dave Hansen
2018-10-02 16:37 ` Borislav Petkov
2018-10-02 16:37 ` Borislav Petkov
2018-10-02 16:39 ` Dave Hansen
2018-10-02 16:39 ` Dave Hansen
2018-10-02 16:43 ` Yu-cheng Yu
2018-10-02 16:43 ` Yu-cheng Yu
2018-09-21 15:03 ` [RFC PATCH v4 03/27] x86/fpu/xstate: Enable XSAVES system states Yu-cheng Yu
2018-09-21 15:03 ` Yu-cheng Yu
2018-09-25 17:03 ` Peter Zijlstra
2018-09-25 17:03 ` Peter Zijlstra
2018-09-25 17:23 ` Yu-cheng Yu
2018-09-25 17:23 ` Yu-cheng Yu
2018-10-02 17:15 ` Borislav Petkov
2018-10-02 17:15 ` Borislav Petkov
2018-10-04 15:47 ` Yu-cheng Yu
2018-10-04 15:47 ` Yu-cheng Yu
2018-09-21 15:03 ` [RFC PATCH v4 04/27] x86/fpu/xstate: Add XSAVES system states for shadow stack Yu-cheng Yu
2018-09-21 15:03 ` Yu-cheng Yu
2018-09-21 15:03 ` [RFC PATCH v4 05/27] Documentation/x86: Add CET description Yu-cheng Yu
2018-09-21 15:03 ` Yu-cheng Yu
2018-09-21 15:03 ` [RFC PATCH v4 06/27] x86/cet: Control protection exception handler Yu-cheng Yu
2018-09-21 15:03 ` Yu-cheng Yu
2018-10-03 10:39 ` Eugene Syromiatnikov
2018-10-03 10:39 ` Eugene Syromiatnikov
2018-10-03 16:11 ` Yu-cheng Yu
2018-10-03 16:11 ` Yu-cheng Yu
2018-09-21 15:03 ` [RFC PATCH v4 07/27] x86/cet/shstk: Add Kconfig option for user-mode shadow stack Yu-cheng Yu
2018-09-21 15:03 ` Yu-cheng Yu
2018-09-21 15:03 ` [RFC PATCH v4 08/27] mm: Introduce VM_SHSTK for shadow stack memory Yu-cheng Yu
2018-09-21 15:03 ` Yu-cheng Yu
2018-09-21 15:03 ` [RFC PATCH v4 09/27] x86/mm: Change _PAGE_DIRTY to _PAGE_DIRTY_HW Yu-cheng Yu
2018-09-21 15:03 ` Yu-cheng Yu
2018-10-03 13:38 ` Matthew Wilcox
2018-10-03 13:38 ` Matthew Wilcox
2018-10-03 14:05 ` Dave Hansen
2018-10-03 14:05 ` Dave Hansen
2018-10-03 16:07 ` Yu-cheng Yu
2018-10-03 16:07 ` Yu-cheng Yu
2018-09-21 15:03 ` [RFC PATCH v4 10/27] drm/i915/gvt: Update _PAGE_DIRTY to _PAGE_DIRTY_BITS Yu-cheng Yu
2018-09-21 15:03 ` Yu-cheng Yu
2018-10-03 13:19 ` Eugene Syromiatnikov
2018-10-03 13:19 ` Eugene Syromiatnikov
2018-09-21 15:03 ` [RFC PATCH v4 11/27] x86/mm: Introduce _PAGE_DIRTY_SW Yu-cheng Yu
2018-09-21 15:03 ` Yu-cheng Yu
2018-09-21 15:03 ` [RFC PATCH v4 12/27] x86/mm: Modify ptep_set_wrprotect and pmdp_set_wrprotect for _PAGE_DIRTY_SW Yu-cheng Yu
2018-09-21 15:03 ` Yu-cheng Yu
2018-09-21 15:03 ` [RFC PATCH v4 13/27] x86/mm: Shadow stack page fault error checking Yu-cheng Yu
2018-09-21 15:03 ` Yu-cheng Yu
2018-09-21 15:03 ` [RFC PATCH v4 14/27] mm: Handle shadow stack page fault Yu-cheng Yu
2018-09-21 15:03 ` Yu-cheng Yu
2018-09-21 15:03 ` [RFC PATCH v4 15/27] mm: Handle THP/HugeTLB " Yu-cheng Yu
2018-09-21 15:03 ` Yu-cheng Yu
2018-09-21 15:03 ` [RFC PATCH v4 16/27] mm: Update can_follow_write_pte/pmd for shadow stack Yu-cheng Yu
2018-09-21 15:03 ` Yu-cheng Yu
2018-09-21 15:03 ` [RFC PATCH v4 17/27] mm: Introduce do_mmap_locked() Yu-cheng Yu
2018-09-21 15:03 ` Yu-cheng Yu
2018-09-21 15:03 ` [RFC PATCH v4 18/27] x86/cet/shstk: User-mode shadow stack support Yu-cheng Yu
2018-09-21 15:03 ` Yu-cheng Yu
2018-10-03 15:08 ` Eugene Syromiatnikov
2018-10-03 15:08 ` Eugene Syromiatnikov
2018-10-03 15:12 ` Yu-cheng Yu
2018-10-03 15:12 ` Yu-cheng Yu
2018-09-21 15:03 ` [RFC PATCH v4 19/27] x86/cet/shstk: Introduce WRUSS instruction Yu-cheng Yu
2018-09-21 15:03 ` Yu-cheng Yu
2018-10-03 4:15 ` Eugene Syromiatnikov
2018-10-03 4:15 ` Eugene Syromiatnikov
2018-09-21 15:03 ` [RFC PATCH v4 20/27] x86/cet/shstk: Signal handling for shadow stack Yu-cheng Yu
2018-09-21 15:03 ` Yu-cheng Yu
2018-10-03 14:36 ` Eugene Syromiatnikov
2018-10-03 14:36 ` Eugene Syromiatnikov
2018-10-03 16:46 ` Jann Horn
2018-10-03 16:46 ` Jann Horn
2018-09-21 15:03 ` [RFC PATCH v4 21/27] x86/cet/shstk: ELF header parsing of Shadow Stack Yu-cheng Yu
2018-09-21 15:03 ` Yu-cheng Yu
2018-10-03 23:27 ` Eugene Syromiatnikov
2018-10-03 23:27 ` Eugene Syromiatnikov
2018-10-09 21:15 ` Yu-cheng Yu
2018-10-09 21:15 ` Yu-cheng Yu
2018-10-15 23:40 ` Kees Cook
2018-10-15 23:40 ` Kees Cook
2018-10-16 17:23 ` Yu-cheng Yu
2018-10-16 17:23 ` Yu-cheng Yu
2018-09-21 15:03 ` [RFC PATCH v4 22/27] x86/cet/shstk: Handle thread shadow stack Yu-cheng Yu
2018-09-21 15:03 ` Yu-cheng Yu
2018-09-21 15:03 ` [RFC PATCH v4 23/27] mm/map: Add Shadow stack pages to memory accounting Yu-cheng Yu
2018-09-21 15:03 ` Yu-cheng Yu
2018-09-21 16:55 ` Randy Dunlap
2018-09-21 16:55 ` Randy Dunlap
2018-09-21 17:21 ` Yu-cheng Yu
2018-09-21 17:21 ` Yu-cheng Yu
2018-09-21 15:03 ` [RFC PATCH v4 24/27] mm/mmap: Create a guard area between VMAs Yu-cheng Yu
2018-09-21 15:03 ` Yu-cheng Yu
2018-10-03 4:56 ` Eugene Syromiatnikov
2018-10-03 4:56 ` Eugene Syromiatnikov
2018-10-03 5:36 ` Andy Lutomirski
2018-10-03 5:36 ` Andy Lutomirski
2018-10-03 16:00 ` Yu-cheng Yu
2018-10-03 16:00 ` Yu-cheng Yu
2018-10-03 16:18 ` Andy Lutomirski
2018-10-03 16:18 ` Andy Lutomirski
2018-10-03 16:32 ` Eugene Syromiatnikov
2018-10-03 16:32 ` Eugene Syromiatnikov
2018-10-03 16:40 ` Yu-cheng Yu
2018-10-03 16:40 ` Yu-cheng Yu
2018-10-03 16:52 ` Jann Horn
2018-10-03 16:52 ` Jann Horn
2018-10-03 21:21 ` Eugene Syromiatnikov
2018-10-03 21:21 ` Eugene Syromiatnikov
2018-09-21 15:03 ` [RFC PATCH v4 25/27] mm/mmap: Prevent Shadow Stack VMA merges Yu-cheng Yu
2018-09-21 15:03 ` Yu-cheng Yu
2018-09-21 15:03 ` [RFC PATCH v4 26/27] x86/cet/shstk: Add arch_prctl functions for Shadow Stack Yu-cheng Yu
2018-09-21 15:03 ` Yu-cheng Yu
2018-10-03 17:57 ` Eugene Syromiatnikov
2018-10-03 17:57 ` Eugene Syromiatnikov
2018-09-21 15:03 ` Yu-cheng Yu [this message]
2018-09-21 15:03 ` [RFC PATCH v4 27/27] x86/cet/shstk: Add Shadow Stack instructions to opcode map Yu-cheng Yu
2018-09-21 22:53 ` [RFC PATCH v4 00/27] Control Flow Enforcement: Shadow Stack Dave Hansen
2018-09-21 22:53 ` Dave Hansen
2018-09-24 15:25 ` Yu-cheng Yu
2018-09-24 15:25 ` Yu-cheng Yu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180921150351.20898-28-yu-cheng.yu@intel.com \
--to=yu-cheng.yu@intel.com \
--cc=arnd@arndb.de \
--cc=bsingharora@gmail.com \
--cc=corbet@lwn.net \
--cc=dave.hansen@linux.intel.com \
--cc=fweimer@redhat.com \
--cc=gorcunov@gmail.com \
--cc=hjl.tools@gmail.com \
--cc=hpa@zytor.com \
--cc=jannh@google.com \
--cc=keescook@chromium.org \
--cc=linux-api@vger.kernel.org \
--cc=linux-arch@vger.kernel.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=luto@amacapital.net \
--cc=mike.kravetz@oracle.com \
--cc=mingo@redhat.com \
--cc=nadav.amit@gmail.com \
--cc=oleg@redhat.com \
--cc=pavel@ucw.cz \
--cc=peterz@infradead.org \
--cc=ravi.v.shankar@intel.com \
--cc=rdunlap@infradead.org \
--cc=tglx@linutronix.de \
--cc=vedvyas.shanbhogue@intel.com \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.