From: Grygorii Strashko <grygorii.strashko@ti.com> To: "David S. Miller" <davem@davemloft.net>, <netdev@vger.kernel.org>, Tony Lindgren <tony@atomide.com>, Rob Herring <robh+dt@kernel.org>, Kishon Vijay Abraham I <kishon@ti.com> Cc: Sekhar Nori <nsekhar@ti.com>, <linux-kernel@vger.kernel.org>, <linux-omap@vger.kernel.org>, <devicetree@vger.kernel.org>, Grygorii Strashko <grygorii.strashko@ti.com> Subject: [RFC PATCH 08/11] ARM: dts: am4372: switch to use phy-gmii-sel Date: Mon, 8 Oct 2018 18:49:46 -0500 [thread overview] Message-ID: <20181008234949.15416-9-grygorii.strashko@ti.com> (raw) In-Reply-To: <20181008234949.15416-1-grygorii.strashko@ti.com> Switch to use phy-gmii-sel PHY instead of cpsw-phy-sel. Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> --- arch/arm/boot/dts/am4372.dtsi | 16 +++++++++------- arch/arm/boot/dts/am43x-epos-evm.dts | 5 +---- 2 files changed, 10 insertions(+), 11 deletions(-) diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index d4b7c59..3dd6d2e 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -212,11 +212,17 @@ }; scm_conf: scm_conf@0 { - compatible = "syscon"; + compatible = "syscon", "simple-bus"; reg = <0x0 0x800>; #address-cells = <1>; #size-cells = <1>; + phy_gmii_sel: phy-gmii-sel { + compatible = "ti,am43xx-phy-gmii-sel"; + syscon-scm = <&scm_conf>; + #phy-cells = <2>; + }; + scm_clocks: clocks { #address-cells = <1>; #size-cells = <0>; @@ -714,17 +720,13 @@ cpsw_emac0: slave@4a100200 { /* Filled in by U-Boot */ mac-address = [ 00 00 00 00 00 00 ]; + phys = <&phy_gmii_sel 1 0>; }; cpsw_emac1: slave@4a100300 { /* Filled in by U-Boot */ mac-address = [ 00 00 00 00 00 00 ]; - }; - - phy_sel: cpsw-phy-sel@44e10650 { - compatible = "ti,am43xx-cpsw-phy-sel"; - reg= <0x44e10650 0x4>; - reg-names = "gmii-sel"; + phys = <&phy_gmii_sel 2 0>; }; }; diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index 6502d33..8677f4a 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -580,10 +580,7 @@ &cpsw_emac0 { phy_id = <&davinci_mdio>, <16>; phy-mode = "rmii"; -}; - -&phy_sel { - rmii-clock-ext; + phys = <&phy_gmii_sel 1 1>; }; &i2c0 { -- 2.10.5
WARNING: multiple messages have this Message-ID (diff)
From: Grygorii Strashko <grygorii.strashko@ti.com> To: "David S. Miller" <davem@davemloft.net>, netdev@vger.kernel.org, Tony Lindgren <tony@atomide.com>, Rob Herring <robh+dt@kernel.org>, Kishon Vijay Abraham I <kishon@ti.com> Cc: Sekhar Nori <nsekhar@ti.com>, linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org, devicetree@vger.kernel.org, Grygorii Strashko <grygorii.strashko@ti.com> Subject: [RFC PATCH 08/11] ARM: dts: am4372: switch to use phy-gmii-sel Date: Mon, 8 Oct 2018 18:49:46 -0500 [thread overview] Message-ID: <20181008234949.15416-9-grygorii.strashko@ti.com> (raw) In-Reply-To: <20181008234949.15416-1-grygorii.strashko@ti.com> Switch to use phy-gmii-sel PHY instead of cpsw-phy-sel. Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> --- arch/arm/boot/dts/am4372.dtsi | 16 +++++++++------- arch/arm/boot/dts/am43x-epos-evm.dts | 5 +---- 2 files changed, 10 insertions(+), 11 deletions(-) diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index d4b7c59..3dd6d2e 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -212,11 +212,17 @@ }; scm_conf: scm_conf@0 { - compatible = "syscon"; + compatible = "syscon", "simple-bus"; reg = <0x0 0x800>; #address-cells = <1>; #size-cells = <1>; + phy_gmii_sel: phy-gmii-sel { + compatible = "ti,am43xx-phy-gmii-sel"; + syscon-scm = <&scm_conf>; + #phy-cells = <2>; + }; + scm_clocks: clocks { #address-cells = <1>; #size-cells = <0>; @@ -714,17 +720,13 @@ cpsw_emac0: slave@4a100200 { /* Filled in by U-Boot */ mac-address = [ 00 00 00 00 00 00 ]; + phys = <&phy_gmii_sel 1 0>; }; cpsw_emac1: slave@4a100300 { /* Filled in by U-Boot */ mac-address = [ 00 00 00 00 00 00 ]; - }; - - phy_sel: cpsw-phy-sel@44e10650 { - compatible = "ti,am43xx-cpsw-phy-sel"; - reg= <0x44e10650 0x4>; - reg-names = "gmii-sel"; + phys = <&phy_gmii_sel 2 0>; }; }; diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index 6502d33..8677f4a 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -580,10 +580,7 @@ &cpsw_emac0 { phy_id = <&davinci_mdio>, <16>; phy-mode = "rmii"; -}; - -&phy_sel { - rmii-clock-ext; + phys = <&phy_gmii_sel 1 1>; }; &i2c0 { -- 2.10.5
next prev parent reply other threads:[~2018-10-08 23:51 UTC|newest] Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top 2018-10-08 23:49 [RFC PATCH 00/11] net: ethernet: ti: cpsw: replace cpsw-phy-sel with phy driver Grygorii Strashko 2018-10-08 23:49 ` Grygorii Strashko 2018-10-08 23:49 ` [RFC PATCH 01/11] phy: core add phy_set_netif_mode() api Grygorii Strashko 2018-10-08 23:49 ` Grygorii Strashko 2018-10-09 5:22 ` Kishon Vijay Abraham I 2018-10-09 5:22 ` Kishon Vijay Abraham I 2018-10-09 22:43 ` Grygorii Strashko 2018-10-09 22:43 ` Grygorii Strashko 2018-10-25 10:05 ` Kishon Vijay Abraham I 2018-10-25 10:05 ` Kishon Vijay Abraham I 2018-10-08 23:49 ` [RFC PATCH 02/11] dt-bindings: phy: add cpsw port interface mode selection phy bindings Grygorii Strashko 2018-10-08 23:49 ` Grygorii Strashko 2018-10-09 14:40 ` Tony Lindgren 2018-10-09 20:10 ` Grygorii Strashko 2018-10-09 20:10 ` Grygorii Strashko 2018-10-09 20:30 ` Tony Lindgren 2018-10-09 22:04 ` Grygorii Strashko 2018-10-09 22:04 ` Grygorii Strashko 2018-10-09 22:07 ` Tony Lindgren 2018-10-17 15:39 ` Rob Herring 2018-10-08 23:49 ` [RFC PATCH 03/11] phy: ti: introduce phy-gmii-sel driver Grygorii Strashko 2018-10-08 23:49 ` Grygorii Strashko 2018-10-09 0:39 ` Andrew Lunn 2018-10-09 20:22 ` Grygorii Strashko 2018-10-09 20:22 ` Grygorii Strashko 2018-10-08 23:49 ` [RFC PATCH 04/11] dt-bindings: net: ti: cpsw: switch to use phy-gmii-sel phy Grygorii Strashko 2018-10-08 23:49 ` Grygorii Strashko 2018-10-17 15:41 ` Rob Herring 2018-10-08 23:49 ` [RFC PATCH 05/11] net: ethernet: ti: cpsw: add support for port interface mode selection phy Grygorii Strashko 2018-10-08 23:49 ` Grygorii Strashko 2018-10-09 0:50 ` Andrew Lunn 2018-10-09 20:28 ` Grygorii Strashko 2018-10-09 20:28 ` Grygorii Strashko 2018-10-08 23:49 ` [RFC PATCH 06/11] ARM: dts: dra7: switch to use phy-gmii-sel Grygorii Strashko 2018-10-08 23:49 ` Grygorii Strashko 2018-10-08 23:49 ` [RFC PATCH 07/11] ARM: dts: dm814x: " Grygorii Strashko 2018-10-08 23:49 ` Grygorii Strashko 2018-10-08 23:49 ` Grygorii Strashko [this message] 2018-10-08 23:49 ` [RFC PATCH 08/11] ARM: dts: am4372: " Grygorii Strashko 2018-10-08 23:49 ` [RFC PATCH 09/11] ARM: dts: am335x: " Grygorii Strashko 2018-10-08 23:49 ` Grygorii Strashko 2018-10-08 23:49 ` [RFC PATCH 10/11] dt-bindings: net: ti: deprecate cpsw-phy-sel bindings Grygorii Strashko 2018-10-08 23:49 ` Grygorii Strashko 2018-10-17 15:41 ` Rob Herring 2018-10-17 15:41 ` Rob Herring 2018-10-08 23:49 ` [RFC PATCH 11/11] net: ethernet: ti: cpsw: deprecate cpsw-phy-sel driver Grygorii Strashko 2018-10-08 23:49 ` Grygorii Strashko 2018-10-09 14:36 ` [RFC PATCH 00/11] net: ethernet: ti: cpsw: replace cpsw-phy-sel with phy driver Tony Lindgren 2018-10-09 21:12 ` Grygorii Strashko 2018-10-09 21:12 ` Grygorii Strashko
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20181008234949.15416-9-grygorii.strashko@ti.com \ --to=grygorii.strashko@ti.com \ --cc=davem@davemloft.net \ --cc=devicetree@vger.kernel.org \ --cc=kishon@ti.com \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-omap@vger.kernel.org \ --cc=netdev@vger.kernel.org \ --cc=nsekhar@ti.com \ --cc=robh+dt@kernel.org \ --cc=tony@atomide.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.