From: Richard Leitner <richard.leitner@skidata.com>
To: <dmitry.torokhov@gmail.com>, <robh+dt@kernel.org>,
<mark.rutland@arm.com>
Cc: <linux-input@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>,
Richard Leitner <richard.leitner@skidata.com>
Subject: [PATCH 3/7] dt-bindings: input: touchscreen: sx8654: add compatible models
Date: Tue, 16 Oct 2018 11:16:49 +0200 [thread overview]
Message-ID: <20181016091653.26896-4-richard.leitner@skidata.com> (raw)
In-Reply-To: <20181016091653.26896-1-richard.leitner@skidata.com>
As the sx865[456] share the same datasheet and differ only in the
presence of a "capacitive proximity detection circuit" and a "haptics
motor driver for LRA/ERM" add them to the compatbiles. As the driver
doesn't implement these features it should be no problem.
Signed-off-by: Richard Leitner <richard.leitner@skidata.com>
---
Documentation/devicetree/bindings/input/touchscreen/sx8654.txt | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt b/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt
index ca521d8f7d65..a538678424dd 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt
@@ -1,7 +1,10 @@
* Semtech SX8654 I2C Touchscreen Controller
Required properties:
-- compatible: must be "semtech,sx8654"
+- compatible: must be one of the following, depending on the model:
+ "semtech,sx8654"
+ "semtech,sx8655"
+ "semtech,sx8656"
- reg: i2c slave address
- interrupts: touch controller interrupt
--
2.11.0
WARNING: multiple messages have this Message-ID (diff)
From: Richard Leitner <richard.leitner@skidata.com>
To: dmitry.torokhov@gmail.com, robh+dt@kernel.org, mark.rutland@arm.com
Cc: linux-input@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Richard Leitner <richard.leitner@skidata.com>
Subject: [PATCH 3/7] dt-bindings: input: touchscreen: sx8654: add compatible models
Date: Tue, 16 Oct 2018 11:16:49 +0200 [thread overview]
Message-ID: <20181016091653.26896-4-richard.leitner@skidata.com> (raw)
In-Reply-To: <20181016091653.26896-1-richard.leitner@skidata.com>
As the sx865[456] share the same datasheet and differ only in the
presence of a "capacitive proximity detection circuit" and a "haptics
motor driver for LRA/ERM" add them to the compatbiles. As the driver
doesn't implement these features it should be no problem.
Signed-off-by: Richard Leitner <richard.leitner@skidata.com>
---
Documentation/devicetree/bindings/input/touchscreen/sx8654.txt | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt b/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt
index ca521d8f7d65..a538678424dd 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt
@@ -1,7 +1,10 @@
* Semtech SX8654 I2C Touchscreen Controller
Required properties:
-- compatible: must be "semtech,sx8654"
+- compatible: must be one of the following, depending on the model:
+ "semtech,sx8654"
+ "semtech,sx8655"
+ "semtech,sx8656"
- reg: i2c slave address
- interrupts: touch controller interrupt
--
2.11.0
next prev parent reply other threads:[~2018-10-16 9:28 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-16 9:16 [PATCH 0/7] Input: sx8654 - reset-gpio, sx865[056] support, etc Richard Leitner
2018-10-16 9:16 ` Richard Leitner
2018-10-16 9:16 ` [PATCH 1/7] dt-bindings: input: touchscreen: sx8654: add reset-gpio property Richard Leitner
2018-10-16 9:16 ` Richard Leitner
2018-10-16 9:16 ` [PATCH 2/7] Input: sx8654 - add reset-gpio support Richard Leitner
2018-10-16 9:16 ` Richard Leitner
2018-10-16 17:39 ` Dmitry Torokhov
2018-10-16 19:32 ` Richard Leitner
2018-10-16 19:32 ` Richard Leitner
2018-10-16 9:16 ` Richard Leitner [this message]
2018-10-16 9:16 ` [PATCH 3/7] dt-bindings: input: touchscreen: sx8654: add compatible models Richard Leitner
2018-10-16 9:16 ` [PATCH 4/7] Input: sx8654 - add sx8655 and sx8656 to compatibles Richard Leitner
2018-10-16 9:16 ` Richard Leitner
2018-10-16 9:22 ` [PATCH 5/7] dt-bindings: input: touchscreen: sx8654: add sx8650 to comatibles Richard Leitner
2018-10-16 9:22 ` Richard Leitner
2018-10-16 9:22 ` [PATCH 6/7] Input: sx8654 - add sx8650 support Richard Leitner
2018-10-16 9:22 ` Richard Leitner
2018-10-16 17:48 ` Dmitry Torokhov
2018-10-16 19:34 ` Richard Leitner
2018-10-16 19:34 ` Richard Leitner
2018-10-16 20:18 ` Dmitry Torokhov
2018-10-16 9:23 ` [PATCH 7/7] Input: sx8654 - use common of_touchscreen functions Richard Leitner
2018-10-16 9:23 ` Richard Leitner
2018-10-16 17:52 ` Dmitry Torokhov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181016091653.26896-4-richard.leitner@skidata.com \
--to=richard.leitner@skidata.com \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.torokhov@gmail.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.