All of lore.kernel.org
 help / color / mirror / Atom feed
From: Kishon Vijay Abraham I <kishon@ti.com>
To: Bjorn Helgaas <bhelgaas@google.com>,
	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	Murali Karicheri <m-karicheri2@ti.com>,
	Jingoo Han <jingoohan1@gmail.com>,
	Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Cc: Rob Herring <robh+dt@kernel.org>, <linux-pci@vger.kernel.org>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	Kishon Vijay Abraham I <kishon@ti.com>
Subject: [PATCH v2 10/21] PCI: keystone: Use SYSCON APIs to get device ID from control module
Date: Wed, 17 Oct 2018 13:11:03 +0530	[thread overview]
Message-ID: <20181017074114.28239-11-kishon@ti.com> (raw)
In-Reply-To: <20181017074114.28239-1-kishon@ti.com>

Control module registers should be read using syscon APIs.
pci-keystone.c uses platform_get_resource to get control module registers.
Fix it here by using syscon APIs to get device id from control module.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/pci/controller/dwc/pci-keystone.c | 45 ++++++++++++++++-------
 1 file changed, 32 insertions(+), 13 deletions(-)

diff --git a/drivers/pci/controller/dwc/pci-keystone.c b/drivers/pci/controller/dwc/pci-keystone.c
index e2045b5d2af2..e22328f89c84 100644
--- a/drivers/pci/controller/dwc/pci-keystone.c
+++ b/drivers/pci/controller/dwc/pci-keystone.c
@@ -15,12 +15,14 @@
 #include <linux/interrupt.h>
 #include <linux/irqdomain.h>
 #include <linux/init.h>
+#include <linux/mfd/syscon.h>
 #include <linux/msi.h>
 #include <linux/of_irq.h>
 #include <linux/of.h>
 #include <linux/of_pci.h>
 #include <linux/platform_device.h>
 #include <linux/phy/phy.h>
+#include <linux/regmap.h>
 #include <linux/resource.h>
 #include <linux/signal.h>
 
@@ -28,6 +30,9 @@
 
 #define DRIVER_NAME	"keystone-pcie"
 
+#define PCIE_VENDORID_MASK	0xffff
+#define PCIE_DEVICEID_SHIFT	16
+
 /* DEV_STAT_CTRL */
 #define PCIE_CAP_BASE		0x70
 
@@ -744,10 +749,34 @@ static int ks_pcie_fault(unsigned long addr, unsigned int fsr,
 	return 0;
 }
 
+static int __init ks_pcie_init_id(struct keystone_pcie *ks_pcie)
+{
+	int ret;
+	unsigned int id;
+	struct regmap *devctrl_regs;
+	struct dw_pcie *pci = ks_pcie->pci;
+	struct device *dev = pci->dev;
+	struct device_node *np = dev->of_node;
+
+	devctrl_regs = syscon_regmap_lookup_by_phandle(np, "ti,syscon-pcie-id");
+	if (IS_ERR(devctrl_regs))
+		return PTR_ERR(devctrl_regs);
+
+	ret = regmap_read(devctrl_regs, 0, &id);
+	if (ret)
+		return ret;
+
+	dw_pcie_writew_dbi(pci, PCI_VENDOR_ID, id & PCIE_VENDORID_MASK);
+	dw_pcie_writew_dbi(pci, PCI_DEVICE_ID, id >> PCIE_DEVICEID_SHIFT);
+
+	return 0;
+}
+
 static int __init ks_pcie_host_init(struct pcie_port *pp)
 {
 	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
 	struct keystone_pcie *ks_pcie = to_keystone_pcie(pci);
+	int ret;
 
 	dw_pcie_setup_rc(pp);
 
@@ -757,8 +786,9 @@ static int __init ks_pcie_host_init(struct pcie_port *pp)
 	writew(PCI_IO_RANGE_TYPE_32 | (PCI_IO_RANGE_TYPE_32 << 8),
 			pci->dbi_base + PCI_IO_BASE);
 
-	/* update the Vendor ID */
-	writew(ks_pcie->device_id, pci->dbi_base + PCI_DEVICE_ID);
+	ret = ks_pcie_init_id(ks_pcie);
+	if (ret < 0)
+		return ret;
 
 	/*
 	 * PCIe access errors that result into OCP errors are caught by ARM as
@@ -864,8 +894,6 @@ static int __init ks_pcie_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct dw_pcie *pci;
 	struct keystone_pcie *ks_pcie;
-	struct resource *res;
-	void __iomem *reg_p;
 	struct phy *phy;
 	int ret;
 
@@ -893,15 +921,6 @@ static int __init ks_pcie_probe(struct platform_device *pdev)
 			return ret;
 	}
 
-	/* index 2 is to read PCI DEVICE_ID */
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
-	reg_p = devm_ioremap_resource(dev, res);
-	if (IS_ERR(reg_p))
-		return PTR_ERR(reg_p);
-	ks_pcie->device_id = readl(reg_p) >> 16;
-	devm_iounmap(dev, reg_p);
-	devm_release_mem_region(dev, res->start, resource_size(res));
-
 	ks_pcie->np = dev->of_node;
 	platform_set_drvdata(pdev, ks_pcie);
 	ks_pcie->clk = devm_clk_get(dev, "pcie");
-- 
2.17.1


WARNING: multiple messages have this Message-ID (diff)
From: Kishon Vijay Abraham I <kishon@ti.com>
To: Bjorn Helgaas <bhelgaas@google.com>,
	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	Murali Karicheri <m-karicheri2@ti.com>,
	Jingoo Han <jingoohan1@gmail.com>,
	Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Cc: Rob Herring <robh+dt@kernel.org>,
	linux-pci@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	Kishon Vijay Abraham I <kishon@ti.com>
Subject: [PATCH v2 10/21] PCI: keystone: Use SYSCON APIs to get device ID from control module
Date: Wed, 17 Oct 2018 13:11:03 +0530	[thread overview]
Message-ID: <20181017074114.28239-11-kishon@ti.com> (raw)
In-Reply-To: <20181017074114.28239-1-kishon@ti.com>

Control module registers should be read using syscon APIs.
pci-keystone.c uses platform_get_resource to get control module registers.
Fix it here by using syscon APIs to get device id from control module.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/pci/controller/dwc/pci-keystone.c | 45 ++++++++++++++++-------
 1 file changed, 32 insertions(+), 13 deletions(-)

diff --git a/drivers/pci/controller/dwc/pci-keystone.c b/drivers/pci/controller/dwc/pci-keystone.c
index e2045b5d2af2..e22328f89c84 100644
--- a/drivers/pci/controller/dwc/pci-keystone.c
+++ b/drivers/pci/controller/dwc/pci-keystone.c
@@ -15,12 +15,14 @@
 #include <linux/interrupt.h>
 #include <linux/irqdomain.h>
 #include <linux/init.h>
+#include <linux/mfd/syscon.h>
 #include <linux/msi.h>
 #include <linux/of_irq.h>
 #include <linux/of.h>
 #include <linux/of_pci.h>
 #include <linux/platform_device.h>
 #include <linux/phy/phy.h>
+#include <linux/regmap.h>
 #include <linux/resource.h>
 #include <linux/signal.h>
 
@@ -28,6 +30,9 @@
 
 #define DRIVER_NAME	"keystone-pcie"
 
+#define PCIE_VENDORID_MASK	0xffff
+#define PCIE_DEVICEID_SHIFT	16
+
 /* DEV_STAT_CTRL */
 #define PCIE_CAP_BASE		0x70
 
@@ -744,10 +749,34 @@ static int ks_pcie_fault(unsigned long addr, unsigned int fsr,
 	return 0;
 }
 
+static int __init ks_pcie_init_id(struct keystone_pcie *ks_pcie)
+{
+	int ret;
+	unsigned int id;
+	struct regmap *devctrl_regs;
+	struct dw_pcie *pci = ks_pcie->pci;
+	struct device *dev = pci->dev;
+	struct device_node *np = dev->of_node;
+
+	devctrl_regs = syscon_regmap_lookup_by_phandle(np, "ti,syscon-pcie-id");
+	if (IS_ERR(devctrl_regs))
+		return PTR_ERR(devctrl_regs);
+
+	ret = regmap_read(devctrl_regs, 0, &id);
+	if (ret)
+		return ret;
+
+	dw_pcie_writew_dbi(pci, PCI_VENDOR_ID, id & PCIE_VENDORID_MASK);
+	dw_pcie_writew_dbi(pci, PCI_DEVICE_ID, id >> PCIE_DEVICEID_SHIFT);
+
+	return 0;
+}
+
 static int __init ks_pcie_host_init(struct pcie_port *pp)
 {
 	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
 	struct keystone_pcie *ks_pcie = to_keystone_pcie(pci);
+	int ret;
 
 	dw_pcie_setup_rc(pp);
 
@@ -757,8 +786,9 @@ static int __init ks_pcie_host_init(struct pcie_port *pp)
 	writew(PCI_IO_RANGE_TYPE_32 | (PCI_IO_RANGE_TYPE_32 << 8),
 			pci->dbi_base + PCI_IO_BASE);
 
-	/* update the Vendor ID */
-	writew(ks_pcie->device_id, pci->dbi_base + PCI_DEVICE_ID);
+	ret = ks_pcie_init_id(ks_pcie);
+	if (ret < 0)
+		return ret;
 
 	/*
 	 * PCIe access errors that result into OCP errors are caught by ARM as
@@ -864,8 +894,6 @@ static int __init ks_pcie_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct dw_pcie *pci;
 	struct keystone_pcie *ks_pcie;
-	struct resource *res;
-	void __iomem *reg_p;
 	struct phy *phy;
 	int ret;
 
@@ -893,15 +921,6 @@ static int __init ks_pcie_probe(struct platform_device *pdev)
 			return ret;
 	}
 
-	/* index 2 is to read PCI DEVICE_ID */
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
-	reg_p = devm_ioremap_resource(dev, res);
-	if (IS_ERR(reg_p))
-		return PTR_ERR(reg_p);
-	ks_pcie->device_id = readl(reg_p) >> 16;
-	devm_iounmap(dev, reg_p);
-	devm_release_mem_region(dev, res->start, resource_size(res));
-
 	ks_pcie->np = dev->of_node;
 	platform_set_drvdata(pdev, ks_pcie);
 	ks_pcie->clk = devm_clk_get(dev, "pcie");
-- 
2.17.1

WARNING: multiple messages have this Message-ID (diff)
From: kishon@ti.com (Kishon Vijay Abraham I)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 10/21] PCI: keystone: Use SYSCON APIs to get device ID from control module
Date: Wed, 17 Oct 2018 13:11:03 +0530	[thread overview]
Message-ID: <20181017074114.28239-11-kishon@ti.com> (raw)
In-Reply-To: <20181017074114.28239-1-kishon@ti.com>

Control module registers should be read using syscon APIs.
pci-keystone.c uses platform_get_resource to get control module registers.
Fix it here by using syscon APIs to get device id from control module.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/pci/controller/dwc/pci-keystone.c | 45 ++++++++++++++++-------
 1 file changed, 32 insertions(+), 13 deletions(-)

diff --git a/drivers/pci/controller/dwc/pci-keystone.c b/drivers/pci/controller/dwc/pci-keystone.c
index e2045b5d2af2..e22328f89c84 100644
--- a/drivers/pci/controller/dwc/pci-keystone.c
+++ b/drivers/pci/controller/dwc/pci-keystone.c
@@ -15,12 +15,14 @@
 #include <linux/interrupt.h>
 #include <linux/irqdomain.h>
 #include <linux/init.h>
+#include <linux/mfd/syscon.h>
 #include <linux/msi.h>
 #include <linux/of_irq.h>
 #include <linux/of.h>
 #include <linux/of_pci.h>
 #include <linux/platform_device.h>
 #include <linux/phy/phy.h>
+#include <linux/regmap.h>
 #include <linux/resource.h>
 #include <linux/signal.h>
 
@@ -28,6 +30,9 @@
 
 #define DRIVER_NAME	"keystone-pcie"
 
+#define PCIE_VENDORID_MASK	0xffff
+#define PCIE_DEVICEID_SHIFT	16
+
 /* DEV_STAT_CTRL */
 #define PCIE_CAP_BASE		0x70
 
@@ -744,10 +749,34 @@ static int ks_pcie_fault(unsigned long addr, unsigned int fsr,
 	return 0;
 }
 
+static int __init ks_pcie_init_id(struct keystone_pcie *ks_pcie)
+{
+	int ret;
+	unsigned int id;
+	struct regmap *devctrl_regs;
+	struct dw_pcie *pci = ks_pcie->pci;
+	struct device *dev = pci->dev;
+	struct device_node *np = dev->of_node;
+
+	devctrl_regs = syscon_regmap_lookup_by_phandle(np, "ti,syscon-pcie-id");
+	if (IS_ERR(devctrl_regs))
+		return PTR_ERR(devctrl_regs);
+
+	ret = regmap_read(devctrl_regs, 0, &id);
+	if (ret)
+		return ret;
+
+	dw_pcie_writew_dbi(pci, PCI_VENDOR_ID, id & PCIE_VENDORID_MASK);
+	dw_pcie_writew_dbi(pci, PCI_DEVICE_ID, id >> PCIE_DEVICEID_SHIFT);
+
+	return 0;
+}
+
 static int __init ks_pcie_host_init(struct pcie_port *pp)
 {
 	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
 	struct keystone_pcie *ks_pcie = to_keystone_pcie(pci);
+	int ret;
 
 	dw_pcie_setup_rc(pp);
 
@@ -757,8 +786,9 @@ static int __init ks_pcie_host_init(struct pcie_port *pp)
 	writew(PCI_IO_RANGE_TYPE_32 | (PCI_IO_RANGE_TYPE_32 << 8),
 			pci->dbi_base + PCI_IO_BASE);
 
-	/* update the Vendor ID */
-	writew(ks_pcie->device_id, pci->dbi_base + PCI_DEVICE_ID);
+	ret = ks_pcie_init_id(ks_pcie);
+	if (ret < 0)
+		return ret;
 
 	/*
 	 * PCIe access errors that result into OCP errors are caught by ARM as
@@ -864,8 +894,6 @@ static int __init ks_pcie_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct dw_pcie *pci;
 	struct keystone_pcie *ks_pcie;
-	struct resource *res;
-	void __iomem *reg_p;
 	struct phy *phy;
 	int ret;
 
@@ -893,15 +921,6 @@ static int __init ks_pcie_probe(struct platform_device *pdev)
 			return ret;
 	}
 
-	/* index 2 is to read PCI DEVICE_ID */
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
-	reg_p = devm_ioremap_resource(dev, res);
-	if (IS_ERR(reg_p))
-		return PTR_ERR(reg_p);
-	ks_pcie->device_id = readl(reg_p) >> 16;
-	devm_iounmap(dev, reg_p);
-	devm_release_mem_region(dev, res->start, resource_size(res));
-
 	ks_pcie->np = dev->of_node;
 	platform_set_drvdata(pdev, ks_pcie);
 	ks_pcie->clk = devm_clk_get(dev, "pcie");
-- 
2.17.1

  parent reply	other threads:[~2018-10-17  7:42 UTC|newest]

Thread overview: 68+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-17  7:40 [PATCH v2 00/21] PCI: Cleanup pci-keystone driver Kishon Vijay Abraham I
2018-10-17  7:40 ` Kishon Vijay Abraham I
2018-10-17  7:40 ` Kishon Vijay Abraham I
2018-10-17  7:40 ` [PATCH v2 01/21] PCI: keystone: Use quirk to limit MRRS for K2G Kishon Vijay Abraham I
2018-10-17  7:40   ` Kishon Vijay Abraham I
2018-10-17  7:40   ` Kishon Vijay Abraham I
2018-10-17  7:40 ` [PATCH v2 02/21] PCI: keystone: Use quirk to set MRRS for PCI host bridge Kishon Vijay Abraham I
2018-10-17  7:40   ` Kishon Vijay Abraham I
2018-10-17  7:40   ` Kishon Vijay Abraham I
2018-10-17  7:40 ` [PATCH v2 03/21] PCI: keystone: Move dw_pcie_setup_rc out of ks_pcie_establish_link() Kishon Vijay Abraham I
2018-10-17  7:40   ` Kishon Vijay Abraham I
2018-10-17  7:40   ` Kishon Vijay Abraham I
2018-10-17  7:40 ` [PATCH v2 04/21] PCI: keystone: Do not initiate link training multiple times Kishon Vijay Abraham I
2018-10-17  7:40   ` Kishon Vijay Abraham I
2018-10-17  7:40   ` Kishon Vijay Abraham I
2018-10-17  7:40 ` [PATCH v2 05/21] PCI: keystone: Remove unused argument from ks_dw_pcie_host_init() Kishon Vijay Abraham I
2018-10-17  7:40   ` Kishon Vijay Abraham I
2018-10-17  7:40   ` Kishon Vijay Abraham I
2018-10-17  7:40 ` [PATCH v2 06/21] PCI: keystone: Merge pci-keystone-dw.c and pci-keystone.c Kishon Vijay Abraham I
2018-10-17  7:40   ` Kishon Vijay Abraham I
2018-10-17  7:40   ` Kishon Vijay Abraham I
2018-10-17  7:41 ` [PATCH v2 07/21] PCI: keystone: Remove redundant platform_set_drvdata Kishon Vijay Abraham I
2018-10-17  7:41   ` Kishon Vijay Abraham I
2018-10-17  7:41   ` Kishon Vijay Abraham I
2018-10-17  7:41 ` [PATCH v2 08/21] PCI: keystone: Use uniform function naming convention Kishon Vijay Abraham I
2018-10-17  7:41   ` Kishon Vijay Abraham I
2018-10-17  7:41   ` Kishon Vijay Abraham I
2018-10-17  7:41 ` [PATCH v2 09/21] dt-bindings: PCI: keystone: Add bindings to get device control module Kishon Vijay Abraham I
2018-10-17  7:41   ` Kishon Vijay Abraham I
2018-10-17  7:41   ` Kishon Vijay Abraham I
2018-10-17  7:41 ` Kishon Vijay Abraham I [this message]
2018-10-17  7:41   ` [PATCH v2 10/21] PCI: keystone: Use SYSCON APIs to get device ID from " Kishon Vijay Abraham I
2018-10-17  7:41   ` Kishon Vijay Abraham I
2018-10-17  7:41 ` [PATCH v2 11/21] PCI: keystone: Cleanup PHY handling Kishon Vijay Abraham I
2018-10-17  7:41   ` Kishon Vijay Abraham I
2018-10-17  7:41   ` Kishon Vijay Abraham I
2018-10-17  7:41 ` [PATCH v2 12/21] PCI: keystone: Invoke pm_runtime APIs to enable clock Kishon Vijay Abraham I
2018-10-17  7:41   ` Kishon Vijay Abraham I
2018-10-17  7:41   ` Kishon Vijay Abraham I
2018-10-17  7:41 ` [PATCH v2 13/21] PCI: keystone: Cleanup configuration space access Kishon Vijay Abraham I
2018-10-17  7:41   ` Kishon Vijay Abraham I
2018-10-17  7:41   ` Kishon Vijay Abraham I
2018-10-17  7:41 ` [PATCH v2 14/21] PCI: keystone: Get number of outbound windows from DT Kishon Vijay Abraham I
2018-10-17  7:41   ` Kishon Vijay Abraham I
2018-10-17  7:41   ` Kishon Vijay Abraham I
2018-10-17  7:41 ` [PATCH v2 15/21] PCI: keystone: Cleanup outbound window configuration Kishon Vijay Abraham I
2018-10-17  7:41   ` Kishon Vijay Abraham I
2018-10-17  7:41   ` Kishon Vijay Abraham I
2018-10-17  7:41 ` [PATCH v2 16/21] PCI: keystone: Cleanup set_dbi_mode and get_dbi_mode Kishon Vijay Abraham I
2018-10-17  7:41   ` Kishon Vijay Abraham I
2018-10-17  7:41   ` Kishon Vijay Abraham I
2018-10-17  7:41 ` [PATCH v2 17/21] PCI: keystone: Cleanup ks_pcie_link_up() Kishon Vijay Abraham I
2018-10-17  7:41   ` Kishon Vijay Abraham I
2018-10-17  7:41   ` Kishon Vijay Abraham I
2018-10-17  7:41 ` [PATCH v2 18/21] PCI: keystone: Use ERR_IRQ_STATUS instead of ERR_IRQ_STATUS_RAW to get interrupt status Kishon Vijay Abraham I
2018-10-17  7:41   ` Kishon Vijay Abraham I
2018-10-17  7:41   ` Kishon Vijay Abraham I
2018-10-17  7:41 ` [PATCH v2 19/21] PCI: keystone: Add debug error message for all errors Kishon Vijay Abraham I
2018-10-17  7:41   ` Kishon Vijay Abraham I
2018-10-17  7:41   ` Kishon Vijay Abraham I
2018-10-17  7:41 ` [PATCH v2 20/21] PCI: keystone: Reorder header file in alphabetical order Kishon Vijay Abraham I
2018-10-17  7:41   ` Kishon Vijay Abraham I
2018-10-17  7:41   ` Kishon Vijay Abraham I
2018-10-17  7:41 ` [PATCH v2 21/21] PCI: keystone: Cleanup macros defined in pci-keystone.c Kishon Vijay Abraham I
2018-10-17  7:41   ` Kishon Vijay Abraham I
2018-10-17  7:41   ` Kishon Vijay Abraham I
2018-10-17 11:12 ` [PATCH v2 00/21] PCI: Cleanup pci-keystone driver Lorenzo Pieralisi
2018-10-17 11:12   ` Lorenzo Pieralisi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181017074114.28239-11-kishon@ti.com \
    --to=kishon@ti.com \
    --cc=bhelgaas@google.com \
    --cc=devicetree@vger.kernel.org \
    --cc=gustavo.pimentel@synopsys.com \
    --cc=jingoohan1@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=m-karicheri2@ti.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.