From: Bjorn Andersson <bjorn.andersson@linaro.org> To: Vinod Koul <vkoul@kernel.org> Cc: Andy Gross <andy.gross@linaro.org>, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org Subject: Re: [PATCH v5 02/18] arm64: dts: qcom: qcs404-evb: add dts files for EVBs Date: Sat, 17 Nov 2018 15:11:28 -0800 [thread overview] Message-ID: <20181117231128.GB2225@minitux> (raw) In-Reply-To: <20181109094417.12109-3-vkoul@kernel.org> On Fri 09 Nov 01:44 PST 2018, Vinod Koul wrote: > QCS404 has two EVBs, EVB-1000 and EVB-4000. These boards are mostly > similar with few differences in the peripherals used. > > So use a common qcs404-evb.dtsi which contains the common parts and use > qcs404-evb-1000.dts and qcs404-evb-4000.dts for diffs > > Signed-off-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Regards, Bjorn > --- > arch/arm64/boot/dts/qcom/Makefile | 2 ++ > arch/arm64/boot/dts/qcom/qcs404-evb-1000.dts | 11 +++++++++++ > arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts | 11 +++++++++++ > arch/arm64/boot/dts/qcom/qcs404-evb.dtsi | 14 ++++++++++++++ > 4 files changed, 38 insertions(+) > create mode 100644 arch/arm64/boot/dts/qcom/qcs404-evb-1000.dts > create mode 100644 arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts > create mode 100644 arch/arm64/boot/dts/qcom/qcs404-evb.dtsi > > diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile > index a658c07652a7..21d548f02d39 100644 > --- a/arch/arm64/boot/dts/qcom/Makefile > +++ b/arch/arm64/boot/dts/qcom/Makefile > @@ -8,3 +8,5 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8994-angler-rev-101.dtb > dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb > dtb-$(CONFIG_ARCH_QCOM) += msm8998-mtp.dtb > dtb-$(CONFIG_ARCH_QCOM) += sdm845-mtp.dtb > +dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb > +dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb > diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb-1000.dts b/arch/arm64/boot/dts/qcom/qcs404-evb-1000.dts > new file mode 100644 > index 000000000000..2c14903d808e > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/qcs404-evb-1000.dts > @@ -0,0 +1,11 @@ > +// SPDX-License-Identifier: GPL-2.0 > +// Copyright (c) 2018, Linaro Limited > + > +/dts-v1/; > + > +#include "qcs404-evb.dtsi" > + > +/ { > + model = "Qualcomm Technologies, Inc. QCS404 EVB 1000"; > + compatible = "qcom,qcs404-evb"; > +}; > diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts b/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts > new file mode 100644 > index 000000000000..11269ad3de0d > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts > @@ -0,0 +1,11 @@ > +// SPDX-License-Identifier: GPL-2.0 > +// Copyright (c) 2018, Linaro Limited > + > +/dts-v1/; > + > +#include "qcs404-evb.dtsi" > + > +/ { > + model = "Qualcomm Technologies, Inc. QCS404 EVB 4000"; > + compatible = "qcom,qcs404-evb"; > +}; > diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi > new file mode 100644 > index 000000000000..91ecbdf0ecda > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi > @@ -0,0 +1,14 @@ > +// SPDX-License-Identifier: GPL-2.0 > +// Copyright (c) 2018, Linaro Limited > + > +#include "qcs404.dtsi" > + > +/ { > + aliases { > + serial0 = &blsp1_uart2; > + }; > + > + chosen { > + stdout-path = "serial0"; > + }; > +}; > -- > 2.14.4 >
WARNING: multiple messages have this Message-ID (diff)
From: bjorn.andersson@linaro.org (Bjorn Andersson) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v5 02/18] arm64: dts: qcom: qcs404-evb: add dts files for EVBs Date: Sat, 17 Nov 2018 15:11:28 -0800 [thread overview] Message-ID: <20181117231128.GB2225@minitux> (raw) In-Reply-To: <20181109094417.12109-3-vkoul@kernel.org> On Fri 09 Nov 01:44 PST 2018, Vinod Koul wrote: > QCS404 has two EVBs, EVB-1000 and EVB-4000. These boards are mostly > similar with few differences in the peripherals used. > > So use a common qcs404-evb.dtsi which contains the common parts and use > qcs404-evb-1000.dts and qcs404-evb-4000.dts for diffs > > Signed-off-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Regards, Bjorn > --- > arch/arm64/boot/dts/qcom/Makefile | 2 ++ > arch/arm64/boot/dts/qcom/qcs404-evb-1000.dts | 11 +++++++++++ > arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts | 11 +++++++++++ > arch/arm64/boot/dts/qcom/qcs404-evb.dtsi | 14 ++++++++++++++ > 4 files changed, 38 insertions(+) > create mode 100644 arch/arm64/boot/dts/qcom/qcs404-evb-1000.dts > create mode 100644 arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts > create mode 100644 arch/arm64/boot/dts/qcom/qcs404-evb.dtsi > > diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile > index a658c07652a7..21d548f02d39 100644 > --- a/arch/arm64/boot/dts/qcom/Makefile > +++ b/arch/arm64/boot/dts/qcom/Makefile > @@ -8,3 +8,5 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8994-angler-rev-101.dtb > dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb > dtb-$(CONFIG_ARCH_QCOM) += msm8998-mtp.dtb > dtb-$(CONFIG_ARCH_QCOM) += sdm845-mtp.dtb > +dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb > +dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb > diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb-1000.dts b/arch/arm64/boot/dts/qcom/qcs404-evb-1000.dts > new file mode 100644 > index 000000000000..2c14903d808e > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/qcs404-evb-1000.dts > @@ -0,0 +1,11 @@ > +// SPDX-License-Identifier: GPL-2.0 > +// Copyright (c) 2018, Linaro Limited > + > +/dts-v1/; > + > +#include "qcs404-evb.dtsi" > + > +/ { > + model = "Qualcomm Technologies, Inc. QCS404 EVB 1000"; > + compatible = "qcom,qcs404-evb"; > +}; > diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts b/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts > new file mode 100644 > index 000000000000..11269ad3de0d > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts > @@ -0,0 +1,11 @@ > +// SPDX-License-Identifier: GPL-2.0 > +// Copyright (c) 2018, Linaro Limited > + > +/dts-v1/; > + > +#include "qcs404-evb.dtsi" > + > +/ { > + model = "Qualcomm Technologies, Inc. QCS404 EVB 4000"; > + compatible = "qcom,qcs404-evb"; > +}; > diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi > new file mode 100644 > index 000000000000..91ecbdf0ecda > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi > @@ -0,0 +1,14 @@ > +// SPDX-License-Identifier: GPL-2.0 > +// Copyright (c) 2018, Linaro Limited > + > +#include "qcs404.dtsi" > + > +/ { > + aliases { > + serial0 = &blsp1_uart2; > + }; > + > + chosen { > + stdout-path = "serial0"; > + }; > +}; > -- > 2.14.4 >
next prev parent reply other threads:[~2018-11-17 23:11 UTC|newest] Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top 2018-11-09 9:43 [PATCH v5 00/18] arm64: dts: qcom: qcs404: Add Device tree nodes Vinod Koul 2018-11-09 9:43 ` Vinod Koul 2018-11-09 9:44 ` [PATCH v5 01/18] arm64: dts: qcom: qcs404: add base dts files Vinod Koul 2018-11-09 9:44 ` Vinod Koul 2018-11-17 23:10 ` Bjorn Andersson 2018-11-17 23:10 ` Bjorn Andersson 2018-11-09 9:44 ` [PATCH v5 02/18] arm64: dts: qcom: qcs404-evb: add dts files for EVBs Vinod Koul 2018-11-09 9:44 ` Vinod Koul 2018-11-17 23:11 ` Bjorn Andersson [this message] 2018-11-17 23:11 ` Bjorn Andersson 2018-11-19 12:01 ` Amit Kucheria 2018-11-19 12:01 ` Amit Kucheria 2018-11-09 9:44 ` [PATCH v5 03/18] arm64: dts: qcom: qcs404: Add reserved-memory regions Vinod Koul 2018-11-09 9:44 ` Vinod Koul 2018-11-09 9:44 ` [PATCH v5 04/18] arm64: dts: qcom: qcs404: Add RPM GLINK related nodes Vinod Koul 2018-11-09 9:44 ` Vinod Koul 2018-11-09 9:44 ` [PATCH v5 05/18] arm64: dts: qcom: qcs404: Add PMS405 RPM regulators Vinod Koul 2018-11-09 9:44 ` Vinod Koul 2018-11-09 9:44 ` [PATCH v5 06/18] arm64: dts: qcom: qcs404: add smp2p nodes Vinod Koul 2018-11-09 9:44 ` Vinod Koul 2018-11-09 9:44 ` [PATCH v5 07/18] arm64: dts: qcom: qcs404: Add TLMM pinctrl node Vinod Koul 2018-11-09 9:44 ` Vinod Koul 2018-11-09 9:44 ` [PATCH v5 08/18] arm64: dts: qcom: qcs404: Add sdcc1 node Vinod Koul 2018-11-09 9:44 ` Vinod Koul 2018-11-09 9:44 ` [PATCH v5 09/18] arm64: dts: qcom: pms405: add spmi node Vinod Koul 2018-11-09 9:44 ` Vinod Koul 2018-11-09 9:44 ` [PATCH v5 10/18] arm64: dts: qcom: qcs404: " Vinod Koul 2018-11-09 9:44 ` Vinod Koul 2018-11-09 9:44 ` [PATCH v5 11/18] arm64: dts: qcom: pms405: add rtc node Vinod Koul 2018-11-09 9:44 ` Vinod Koul 2018-11-09 9:44 ` [PATCH v5 12/18] arm64: dts: qcom: pms405: add gpios Vinod Koul 2018-11-09 9:44 ` Vinod Koul 2018-11-17 23:12 ` Bjorn Andersson 2018-11-17 23:12 ` Bjorn Andersson 2018-11-09 9:44 ` [PATCH v5 13/18] arm64: dts: qcom: qcs404: Add scm firmware node Vinod Koul 2018-11-09 9:44 ` Vinod Koul 2018-11-09 9:44 ` [PATCH v5 14/18] arm64: dts: qcom: qcs404: Add remoteproc nodes Vinod Koul 2018-11-09 9:44 ` Vinod Koul 2018-11-19 5:31 ` Sibi Sankar 2018-11-19 5:31 ` Sibi Sankar 2018-11-09 9:44 ` [PATCH v5 15/18] arm64: dts: qcom: qcs404: add prng-ee node Vinod Koul 2018-11-09 9:44 ` Vinod Koul 2018-11-09 9:44 ` [PATCH v5 16/18] arm64: dts: qcom: qcs404: Add BAM DMA node Vinod Koul 2018-11-09 9:44 ` Vinod Koul 2018-11-09 9:44 ` [PATCH v5 17/18] arm64: dts: qcom: qcs404: Use BAM DMA for serial uart2 Vinod Koul 2018-11-09 9:44 ` Vinod Koul 2018-11-09 9:44 ` [PATCH v5 18/18] arm64: dts: qcom: pms405: Add pon and pwrkey nodes Vinod Koul 2018-11-09 9:44 ` Vinod Koul
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20181117231128.GB2225@minitux \ --to=bjorn.andersson@linaro.org \ --cc=andy.gross@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-arm-msm@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=vkoul@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.