[PATCH v2 8/8] ARM64: dts: marvell: armada-37xx: declare the COMPHY node

From: Miquel Raynal <miquel.raynal@bootlin.com>
To: Gregory Clement <gregory.clement@bootlin.com>,
	Jason Cooper <jason@lakedaemon.net>, Andrew Lunn <andrew@lunn.ch>,
	Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>,
	Kishon Vijay Abraham I <kishon@ti.com>
Cc: <devicetree@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	linux-kernel@vger.kernel.org, Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
	Antoine Tenart <antoine.tenart@bootlin.com>,
	Maxime Chevallier <maxime.chevallier@bootlin.com>,
	Nadav Haklai <nadavh@marvell.com>,
	Marcin Wojtas <mw@semihalf.com>,
	Grzegorz Jaszczyk <jaz@semihalf.com>,
	Miquel Raynal <miquel.raynal@bootlin.com>
Subject: [PATCH v2 8/8] ARM64: dts: marvell: armada-37xx: declare the COMPHY node
Date: Fri, 30 Nov 2018 15:47:43 +0100	[thread overview]
Message-ID: <20181130144743.675-9-miquel.raynal@bootlin.com> (raw)
In-Reply-To: <20181130144743.675-1-miquel.raynal@bootlin.com>

Describe the A3700 COMPHY node. It has three PHYs that can be
configured as follow:
* PCIe or GbE
* USB3 or GbE
* SATA or USB3
Each of them has its own memory area.

Suggested-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
 arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 29 ++++++++++++++++++++
 1 file changed, 29 insertions(+)

diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
index e7405931f381..036d6fd6c9ef 100644
--- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
@@ -242,6 +242,35 @@
 				reg = <0x14000 0x60>;
 			};
 
+			comphy: phy@18300 {
+				compatible = "marvell,comphy-a3700";
+				reg = <0x18300 0x300>,
+				      <0x1F000 0x400>,
+				      <0x5C000 0x400>,
+				      <0xe0178 0x8>;
+				reg-names = "comphy",
+					    "lane1_pcie_gbe",
+					    "lane0_usb3_gbe",
+					    "lane2_sata_usb3";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				comphy0: phy@0 {
+					reg = <0>;
+					#phy-cells = <1>;
+				};
+
+				comphy1: phy@1 {
+					reg = <1>;
+					#phy-cells = <1>;
+				};
+
+				comphy2: phy@2 {
+					reg = <2>;
+					#phy-cells = <1>;
+				};
+			};
+
 			pinctrl_sb: pinctrl@18800 {
 				compatible = "marvell,armada3710-sb-pinctrl",
 					     "syscon", "simple-mfd";
-- 
2.19.1

