Re: [PATCH] ARM: dts: imx6sl: correct PWM ipg clock source - Uwe Kleine-König

From: "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>
To: Anson Huang <anson.huang@nxp.com>
Cc: "shawnguo@kernel.org" <shawnguo@kernel.org>,
	"s.hauer@pengutronix.de" <s.hauer@pengutronix.de>,
	"kernel@pengutronix.de" <kernel@pengutronix.de>,
	Fabio Estevam <fabio.estevam@nxp.com>,
	"robh+dt@kernel.org" <robh+dt@kernel.org>,
	"mark.rutland@arm.com" <mark.rutland@arm.com>,
	"linux-arm-kernel@lists.infradead.org" 
	<linux-arm-kernel@lists.infradead.org>,
	"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	dl-linux-imx <linux-imx@nxp.com>,
	linux-pwm@vger.kernel.org
Subject: Re: [PATCH] ARM: dts: imx6sl: correct PWM ipg clock source
Date: Wed, 19 Dec 2018 09:36:40 +0100	[thread overview]
Message-ID: <20181219083640.42jmibqzn2t3i4t2@pengutronix.de> (raw)
In-Reply-To: <1545197799-9082-1-git-send-email-Anson.Huang@nxp.com>

[Cc: += linux-pwm]

Hello,

On Wed, Dec 19, 2018 at 05:41:31AM +0000, Anson Huang wrote:
> From i.MX6SL Reference Manual, the PWMx's ipg clock
> for registers access is from perclk, correct them.

I assume this is related to the patch "pwm: imx: add ipg clock
operation"? This patch doesn't fix a real problem because in practise
perclk is already enabled, right? (I don't question the patch, just
wonder how urgent it is.)

> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> ---
>  arch/arm/boot/dts/imx6sl.dtsi | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
> index e7524e7..4b4813f 100644
> --- a/arch/arm/boot/dts/imx6sl.dtsi
> +++ b/arch/arm/boot/dts/imx6sl.dtsi
> @@ -338,7 +338,7 @@
>  				compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm";
>  				reg = <0x02080000 0x4000>;
>  				interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>;
> -				clocks = <&clks IMX6SL_CLK_PWM1>,
> +				clocks = <&clks IMX6SL_CLK_PERCLK>,
>  					 <&clks IMX6SL_CLK_PWM1>;
>  				clock-names = "ipg", "per";

It's a bit irritating that IMX6SL_CLK_PERCLK is used for the "ipg" clk,
not the "per" clk. Is this correct?

Best regards
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |