[PATCH v2 00/10] A3700 USB S2RAM support

From: Miquel Raynal <miquel.raynal@bootlin.com>
To: Kishon Vijay Abraham I <kishon@ti.com>,
	Gregory Clement <gregory.clement@bootlin.com>,
	Jason Cooper <jason@lakedaemon.net>, Andrew Lunn <andrew@lunn.ch>,
	Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Mathias Nyman <mathias.nyman@intel.com>,
	Alan Stern <stern@rowland.harvard.edu>
Cc: devicetree@vger.kernel.org,
	Antoine Tenart <antoine.tenart@bootlin.com>,
	linux-usb@vger.kernel.org,
	Maxime Chevallier <maxime.chevallier@bootlin.com>,
	Nadav Haklai <nadavh@marvell.com>,
	Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
	Miquel Raynal <miquel.raynal@bootlin.com>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 00/10] A3700 USB S2RAM support
Date: Fri, 11 Jan 2019 14:31:23 +0100	[thread overview]
Message-ID: <20190111133133.24803-1-miquel.raynal@bootlin.com> (raw)

Hello,

As part of an effort to bring suspend to RAM support to Armada 3700
SoCs (main target: ESPRESSObin), this series handles the work around
the USB2 and USB32 IPs.

First, a change in the core adds support for the new PHY framework by
following the phy_set_mode()/phy_power_on() sequence (patch 1). The
second change needed is to update the xHCI MVEBU driver (patch 2) with
the XHCI_RESET_ON_RESUME quirk that will do most of the
reconfiguration work when resuming.

Then, because of the asynchronous suspend feature implemented lately,
the xHCI driver was blocking during the S2RAM operation, probably due
to a register access while the clock was not enabled. A first patch
has been written for that, adding a new quirk to ignore the
asynchronous setting [1] which has become useless once clock links
with consumer have been contributed [2] (series not merged yet).

Then, the OHCI Orion (USB2 host controller) driver is updated to avoid
doing twice the PHY management (patch 3) and upgraded with traditional
S2RAM callbacks (patch 4).

The last missing peace is a UTMI PHY driver for the USB2 part of each
controller, which is added in patch 5 (see patch 6 for the bindings).

Finally, the A3700 device tree is updated (patch 7, 8, 9) to reference
the PHYs. xHCI bindings already document the PHY so no update is needed
on this regard.

[1] http://code.bulix.org/s2ccd4-511198
[2] http://lists.infradead.org/pipermail/linux-arm-kernel/2019-January/623885.html

Thanks,
Miquèl

Changes since v1:
=================
* Add UTMI PHY driver/bindings/DT changes to bring S2RAM support to
  both USB ports available on the A3700 SoC.
* Updates to the OHCI Orion driver to avoid doing the PHY
  initialization twice.
* Upgrade of the OHCI Orion driver with S2RAM callbacks.
* Added a reference to the A3700 SoC in the USB Host Kconfig prompt
  (not only in the help section).
* Rebased on top of v5.0-rc1.

Miquel Raynal (9):
  usb: core: comply to PHY framework
  usb: ehci-orion: avoid double PHY initialization
  usb: ehci-orion: add S2RAM support
  phy: add A3700 UTMI PHY driver
  dt-bindings: phy: mvebu-utmi: add UTMI PHY bindings
  MAINTAINERS: phy: fill Armada 3700 PHY drivers entry
  ARM64: dts: marvell: armada-37xx: fix USB2 memory region
  ARM64: dts: marvell: armada-37xx: declare USB2 UTMI PHYs
  ARM64: dts: marvell: armada-37xx: link USB hosts with their PHYs

Ofer Heifetz (1):
  usb: host: xhci: mvebu: add reset on resume quirk

 .../bindings/phy/phy-mvebu-utmi.txt           |  37 +++
 MAINTAINERS                                   |   4 +-
 arch/arm64/boot/dts/marvell/armada-37xx.dtsi  |  32 +-
 drivers/phy/marvell/Kconfig                   |   9 +
 drivers/phy/marvell/Makefile                  |   1 +
 drivers/phy/marvell/phy-mvebu-a3700-utmi.c    | 297 ++++++++++++++++++
 drivers/usb/core/hcd.c                        |   5 +
 drivers/usb/core/phy.c                        |  28 ++
 drivers/usb/core/phy.h                        |   2 +
 drivers/usb/host/Kconfig                      |   4 +-
 drivers/usb/host/ehci-orion.c                 |  51 +--
 drivers/usb/host/xhci-mvebu.c                 |  11 +
 drivers/usb/host/xhci-mvebu.h                 |   6 +
 drivers/usb/host/xhci-plat.c                  |   7 +
 14 files changed, 467 insertions(+), 27 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/phy/phy-mvebu-utmi.txt
 create mode 100644 drivers/phy/marvell/phy-mvebu-a3700-utmi.c

-- 
2.19.1

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel