From: Chen-Yu Tsai <wens@csie.org> To: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Chen-Yu Tsai <wens@csie.org>, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com Subject: [PATCH 1/2] ARM: dts: sun8i: a83t: Enable PMIC power supplies on various boards Date: Tue, 5 Feb 2019 23:00:39 +0800 [thread overview] Message-ID: <20190205150040.12343-1-wens@csie.org> (raw) On the Bananapi M3 and Cubietruck Plus, the DC input jacks are wired to the ACIN pins, which is represented by the AC power supply. Both boards have connectors for LiPo batteries, which are represented by the battery power supply. The H8 Homlet is a set-top box design. The DC input jack is wired to the ACIN pins, but there are no battery connectors. Enable these power supplies in the device tree. Signed-off-by: Chen-Yu Tsai <wens@csie.org> --- arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts | 4 ++++ arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts | 8 ++++++++ arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts | 8 ++++++++ 3 files changed, 20 insertions(+) diff --git a/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts b/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts index 1c012a4def16..9c006fc18821 100644 --- a/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts +++ b/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts @@ -154,6 +154,10 @@ #include "axp81x.dtsi" +&ac_power_supply { + status = "okay"; +}; + ®_aldo1 { regulator-always-on; regulator-min-microvolt = <1800000>; diff --git a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts index 7d30d3e530fb..838be7b3715f 100644 --- a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts +++ b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts @@ -237,6 +237,14 @@ #include "axp81x.dtsi" +&ac_power_supply { + status = "okay"; +}; + +&battery_power_supply { + status = "okay"; +}; + ®_aldo1 { regulator-always-on; regulator-min-microvolt = <1800000>; diff --git a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts index a5a9f5a0603e..fcbec3d7ccd7 100644 --- a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts +++ b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts @@ -247,6 +247,14 @@ #include "axp81x.dtsi" +&ac_power_supply { + status = "okay"; +}; + +&battery_power_supply { + status = "okay"; +}; + ®_aldo1 { regulator-always-on; regulator-min-microvolt = <1800000>; -- 2.20.1
WARNING: multiple messages have this Message-ID (diff)
From: Chen-Yu Tsai <wens@csie.org> To: Maxime Ripard <maxime.ripard@bootlin.com> Cc: devicetree@vger.kernel.org, Chen-Yu Tsai <wens@csie.org>, linux-sunxi@googlegroups.com, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH 1/2] ARM: dts: sun8i: a83t: Enable PMIC power supplies on various boards Date: Tue, 5 Feb 2019 23:00:39 +0800 [thread overview] Message-ID: <20190205150040.12343-1-wens@csie.org> (raw) On the Bananapi M3 and Cubietruck Plus, the DC input jacks are wired to the ACIN pins, which is represented by the AC power supply. Both boards have connectors for LiPo batteries, which are represented by the battery power supply. The H8 Homlet is a set-top box design. The DC input jack is wired to the ACIN pins, but there are no battery connectors. Enable these power supplies in the device tree. Signed-off-by: Chen-Yu Tsai <wens@csie.org> --- arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts | 4 ++++ arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts | 8 ++++++++ arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts | 8 ++++++++ 3 files changed, 20 insertions(+) diff --git a/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts b/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts index 1c012a4def16..9c006fc18821 100644 --- a/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts +++ b/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts @@ -154,6 +154,10 @@ #include "axp81x.dtsi" +&ac_power_supply { + status = "okay"; +}; + ®_aldo1 { regulator-always-on; regulator-min-microvolt = <1800000>; diff --git a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts index 7d30d3e530fb..838be7b3715f 100644 --- a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts +++ b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts @@ -237,6 +237,14 @@ #include "axp81x.dtsi" +&ac_power_supply { + status = "okay"; +}; + +&battery_power_supply { + status = "okay"; +}; + ®_aldo1 { regulator-always-on; regulator-min-microvolt = <1800000>; diff --git a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts index a5a9f5a0603e..fcbec3d7ccd7 100644 --- a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts +++ b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts @@ -247,6 +247,14 @@ #include "axp81x.dtsi" +&ac_power_supply { + status = "okay"; +}; + +&battery_power_supply { + status = "okay"; +}; + ®_aldo1 { regulator-always-on; regulator-min-microvolt = <1800000>; -- 2.20.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2019-02-05 15:00 UTC|newest] Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-02-05 15:00 Chen-Yu Tsai [this message] 2019-02-05 15:00 ` [PATCH 1/2] ARM: dts: sun8i: a83t: Enable PMIC power supplies on various boards Chen-Yu Tsai 2019-02-05 15:00 ` [PATCH 2/2] arm64: dts: allwinner: a64: " Chen-Yu Tsai 2019-02-05 15:00 ` Chen-Yu Tsai 2019-02-05 15:00 ` Chen-Yu Tsai 2019-02-06 12:19 ` Maxime Ripard 2019-02-06 12:19 ` Maxime Ripard 2019-02-06 12:19 ` Maxime Ripard
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20190205150040.12343-1-wens@csie.org \ --to=wens@csie.org \ --cc=devicetree@vger.kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-sunxi@googlegroups.com \ --cc=maxime.ripard@bootlin.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.