From: Kishon Vijay Abraham I <kishon@ti.com>
To: Murali Karicheri <m-karicheri2@ti.com>,
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>,
Bjorn Helgaas <bhelgaas@google.com>,
Jingoo Han <jingoohan1@gmail.com>,
Gustavo Pimentel <gustavo.pimentel@synopsys.com>,
<linux-pci@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>
Subject: [PATCH v3 8/9] PCI: dwc: Remove Keystone specific dw_pcie_host_ops
Date: Wed, 13 Feb 2019 18:56:28 +0530 [thread overview]
Message-ID: <20190213132629.24790-9-kishon@ti.com> (raw)
In-Reply-To: <20190213132629.24790-1-kishon@ti.com>
Now that Keystone started using its own msi_irq_chip, remove
Keystone specific callback functions defined in dw_pcie_host_ops.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
.../pci/controller/dwc/pcie-designware-host.c | 50 ++++++-------------
drivers/pci/controller/dwc/pcie-designware.h | 5 --
2 files changed, 14 insertions(+), 41 deletions(-)
diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
index 72cfedce5af1..781735f06dea 100644
--- a/drivers/pci/controller/dwc/pcie-designware-host.c
+++ b/drivers/pci/controller/dwc/pcie-designware-host.c
@@ -126,18 +126,12 @@ static void dw_pci_setup_msi_msg(struct irq_data *data, struct msi_msg *msg)
struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
u64 msi_target;
- if (pp->ops->get_msi_addr)
- msi_target = pp->ops->get_msi_addr(pp);
- else
- msi_target = (u64)pp->msi_data;
+ msi_target = (u64)pp->msi_data;
msg->address_lo = lower_32_bits(msi_target);
msg->address_hi = upper_32_bits(msi_target);
- if (pp->ops->get_msi_data)
- msg->data = pp->ops->get_msi_data(pp, data->hwirq);
- else
- msg->data = data->hwirq;
+ msg->data = data->hwirq;
dev_dbg(pci->dev, "msi#%d address_hi %#x address_lo %#x\n",
(int)data->hwirq, msg->address_hi, msg->address_lo);
@@ -157,17 +151,13 @@ static void dw_pci_bottom_mask(struct irq_data *data)
raw_spin_lock_irqsave(&pp->lock, flags);
- if (pp->ops->msi_clear_irq) {
- pp->ops->msi_clear_irq(pp, data->hwirq);
- } else {
- ctrl = data->hwirq / MAX_MSI_IRQS_PER_CTRL;
- res = ctrl * MSI_REG_CTRL_BLOCK_SIZE;
- bit = data->hwirq % MAX_MSI_IRQS_PER_CTRL;
+ ctrl = data->hwirq / MAX_MSI_IRQS_PER_CTRL;
+ res = ctrl * MSI_REG_CTRL_BLOCK_SIZE;
+ bit = data->hwirq % MAX_MSI_IRQS_PER_CTRL;
- pp->irq_status[ctrl] &= ~(1 << bit);
- dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_MASK + res, 4,
- ~pp->irq_status[ctrl]);
- }
+ pp->irq_status[ctrl] &= ~(1 << bit);
+ dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_MASK + res, 4,
+ ~pp->irq_status[ctrl]);
raw_spin_unlock_irqrestore(&pp->lock, flags);
}
@@ -180,17 +170,13 @@ static void dw_pci_bottom_unmask(struct irq_data *data)
raw_spin_lock_irqsave(&pp->lock, flags);
- if (pp->ops->msi_set_irq) {
- pp->ops->msi_set_irq(pp, data->hwirq);
- } else {
- ctrl = data->hwirq / MAX_MSI_IRQS_PER_CTRL;
- res = ctrl * MSI_REG_CTRL_BLOCK_SIZE;
- bit = data->hwirq % MAX_MSI_IRQS_PER_CTRL;
+ ctrl = data->hwirq / MAX_MSI_IRQS_PER_CTRL;
+ res = ctrl * MSI_REG_CTRL_BLOCK_SIZE;
+ bit = data->hwirq % MAX_MSI_IRQS_PER_CTRL;
- pp->irq_status[ctrl] |= 1 << bit;
- dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_MASK + res, 4,
- ~pp->irq_status[ctrl]);
- }
+ pp->irq_status[ctrl] |= 1 << bit;
+ dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_MASK + res, 4,
+ ~pp->irq_status[ctrl]);
raw_spin_unlock_irqrestore(&pp->lock, flags);
}
@@ -199,20 +185,12 @@ static void dw_pci_bottom_ack(struct irq_data *d)
{
struct pcie_port *pp = irq_data_get_irq_chip_data(d);
unsigned int res, bit, ctrl;
- unsigned long flags;
ctrl = d->hwirq / MAX_MSI_IRQS_PER_CTRL;
res = ctrl * MSI_REG_CTRL_BLOCK_SIZE;
bit = d->hwirq % MAX_MSI_IRQS_PER_CTRL;
- raw_spin_lock_irqsave(&pp->lock, flags);
-
dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_STATUS + res, 4, 1 << bit);
-
- if (pp->ops->msi_irq_ack)
- pp->ops->msi_irq_ack(d->hwirq, pp);
-
- raw_spin_unlock_irqrestore(&pp->lock, flags);
}
static struct irq_chip dw_pci_msi_bottom_irq_chip = {
diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
index cb6eeb062f47..ac75cde80a0c 100644
--- a/drivers/pci/controller/dwc/pcie-designware.h
+++ b/drivers/pci/controller/dwc/pcie-designware.h
@@ -142,14 +142,9 @@ struct dw_pcie_host_ops {
int (*wr_other_conf)(struct pcie_port *pp, struct pci_bus *bus,
unsigned int devfn, int where, int size, u32 val);
int (*host_init)(struct pcie_port *pp);
- void (*msi_set_irq)(struct pcie_port *pp, int irq);
- void (*msi_clear_irq)(struct pcie_port *pp, int irq);
- phys_addr_t (*get_msi_addr)(struct pcie_port *pp);
- u32 (*get_msi_data)(struct pcie_port *pp, int pos);
void (*scan_bus)(struct pcie_port *pp);
void (*set_num_vectors)(struct pcie_port *pp);
int (*msi_host_init)(struct pcie_port *pp);
- void (*msi_irq_ack)(int irq, struct pcie_port *pp);
};
struct pcie_port {
--
2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Kishon Vijay Abraham I <kishon@ti.com>
To: Murali Karicheri <m-karicheri2@ti.com>,
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Jingoo Han <jingoohan1@gmail.com>,
linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
Kishon Vijay Abraham I <kishon@ti.com>,
Gustavo Pimentel <gustavo.pimentel@synopsys.com>,
Bjorn Helgaas <bhelgaas@google.com>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 8/9] PCI: dwc: Remove Keystone specific dw_pcie_host_ops
Date: Wed, 13 Feb 2019 18:56:28 +0530 [thread overview]
Message-ID: <20190213132629.24790-9-kishon@ti.com> (raw)
In-Reply-To: <20190213132629.24790-1-kishon@ti.com>
Now that Keystone started using its own msi_irq_chip, remove
Keystone specific callback functions defined in dw_pcie_host_ops.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
.../pci/controller/dwc/pcie-designware-host.c | 50 ++++++-------------
drivers/pci/controller/dwc/pcie-designware.h | 5 --
2 files changed, 14 insertions(+), 41 deletions(-)
diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
index 72cfedce5af1..781735f06dea 100644
--- a/drivers/pci/controller/dwc/pcie-designware-host.c
+++ b/drivers/pci/controller/dwc/pcie-designware-host.c
@@ -126,18 +126,12 @@ static void dw_pci_setup_msi_msg(struct irq_data *data, struct msi_msg *msg)
struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
u64 msi_target;
- if (pp->ops->get_msi_addr)
- msi_target = pp->ops->get_msi_addr(pp);
- else
- msi_target = (u64)pp->msi_data;
+ msi_target = (u64)pp->msi_data;
msg->address_lo = lower_32_bits(msi_target);
msg->address_hi = upper_32_bits(msi_target);
- if (pp->ops->get_msi_data)
- msg->data = pp->ops->get_msi_data(pp, data->hwirq);
- else
- msg->data = data->hwirq;
+ msg->data = data->hwirq;
dev_dbg(pci->dev, "msi#%d address_hi %#x address_lo %#x\n",
(int)data->hwirq, msg->address_hi, msg->address_lo);
@@ -157,17 +151,13 @@ static void dw_pci_bottom_mask(struct irq_data *data)
raw_spin_lock_irqsave(&pp->lock, flags);
- if (pp->ops->msi_clear_irq) {
- pp->ops->msi_clear_irq(pp, data->hwirq);
- } else {
- ctrl = data->hwirq / MAX_MSI_IRQS_PER_CTRL;
- res = ctrl * MSI_REG_CTRL_BLOCK_SIZE;
- bit = data->hwirq % MAX_MSI_IRQS_PER_CTRL;
+ ctrl = data->hwirq / MAX_MSI_IRQS_PER_CTRL;
+ res = ctrl * MSI_REG_CTRL_BLOCK_SIZE;
+ bit = data->hwirq % MAX_MSI_IRQS_PER_CTRL;
- pp->irq_status[ctrl] &= ~(1 << bit);
- dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_MASK + res, 4,
- ~pp->irq_status[ctrl]);
- }
+ pp->irq_status[ctrl] &= ~(1 << bit);
+ dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_MASK + res, 4,
+ ~pp->irq_status[ctrl]);
raw_spin_unlock_irqrestore(&pp->lock, flags);
}
@@ -180,17 +170,13 @@ static void dw_pci_bottom_unmask(struct irq_data *data)
raw_spin_lock_irqsave(&pp->lock, flags);
- if (pp->ops->msi_set_irq) {
- pp->ops->msi_set_irq(pp, data->hwirq);
- } else {
- ctrl = data->hwirq / MAX_MSI_IRQS_PER_CTRL;
- res = ctrl * MSI_REG_CTRL_BLOCK_SIZE;
- bit = data->hwirq % MAX_MSI_IRQS_PER_CTRL;
+ ctrl = data->hwirq / MAX_MSI_IRQS_PER_CTRL;
+ res = ctrl * MSI_REG_CTRL_BLOCK_SIZE;
+ bit = data->hwirq % MAX_MSI_IRQS_PER_CTRL;
- pp->irq_status[ctrl] |= 1 << bit;
- dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_MASK + res, 4,
- ~pp->irq_status[ctrl]);
- }
+ pp->irq_status[ctrl] |= 1 << bit;
+ dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_MASK + res, 4,
+ ~pp->irq_status[ctrl]);
raw_spin_unlock_irqrestore(&pp->lock, flags);
}
@@ -199,20 +185,12 @@ static void dw_pci_bottom_ack(struct irq_data *d)
{
struct pcie_port *pp = irq_data_get_irq_chip_data(d);
unsigned int res, bit, ctrl;
- unsigned long flags;
ctrl = d->hwirq / MAX_MSI_IRQS_PER_CTRL;
res = ctrl * MSI_REG_CTRL_BLOCK_SIZE;
bit = d->hwirq % MAX_MSI_IRQS_PER_CTRL;
- raw_spin_lock_irqsave(&pp->lock, flags);
-
dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_STATUS + res, 4, 1 << bit);
-
- if (pp->ops->msi_irq_ack)
- pp->ops->msi_irq_ack(d->hwirq, pp);
-
- raw_spin_unlock_irqrestore(&pp->lock, flags);
}
static struct irq_chip dw_pci_msi_bottom_irq_chip = {
diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
index cb6eeb062f47..ac75cde80a0c 100644
--- a/drivers/pci/controller/dwc/pcie-designware.h
+++ b/drivers/pci/controller/dwc/pcie-designware.h
@@ -142,14 +142,9 @@ struct dw_pcie_host_ops {
int (*wr_other_conf)(struct pcie_port *pp, struct pci_bus *bus,
unsigned int devfn, int where, int size, u32 val);
int (*host_init)(struct pcie_port *pp);
- void (*msi_set_irq)(struct pcie_port *pp, int irq);
- void (*msi_clear_irq)(struct pcie_port *pp, int irq);
- phys_addr_t (*get_msi_addr)(struct pcie_port *pp);
- u32 (*get_msi_data)(struct pcie_port *pp, int pos);
void (*scan_bus)(struct pcie_port *pp);
void (*set_num_vectors)(struct pcie_port *pp);
int (*msi_host_init)(struct pcie_port *pp);
- void (*msi_irq_ack)(int irq, struct pcie_port *pp);
};
struct pcie_port {
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-02-13 13:28 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-13 13:26 [PATCH v3 0/9] PCI: DWC/Keystone: MSI configuration cleanup Kishon Vijay Abraham I
2019-02-13 13:26 ` Kishon Vijay Abraham I
2019-02-13 13:26 ` [PATCH v3 1/9] PCI: keystone: Cleanup interrupt related macros Kishon Vijay Abraham I
2019-02-13 13:26 ` Kishon Vijay Abraham I
2019-02-13 13:26 ` [PATCH v3 2/9] PCI: keystone: Add separate functions for configuring MSI and legacy interrupt Kishon Vijay Abraham I
2019-02-13 13:26 ` Kishon Vijay Abraham I
2019-02-13 13:26 ` [PATCH v3 3/9] PCI: keystone: Use hwirq to get the legacy IRQ number offset Kishon Vijay Abraham I
2019-02-13 13:26 ` Kishon Vijay Abraham I
2019-02-13 16:57 ` Lorenzo Pieralisi
2019-02-13 16:57 ` Lorenzo Pieralisi
2019-02-14 4:57 ` Kishon Vijay Abraham I
2019-02-14 4:57 ` Kishon Vijay Abraham I
2019-02-14 10:31 ` Lorenzo Pieralisi
2019-02-14 10:31 ` Lorenzo Pieralisi
2019-02-14 12:46 ` Marc Zyngier
2019-02-14 12:46 ` Marc Zyngier
2019-02-21 9:18 ` Kishon Vijay Abraham I
2019-02-21 9:18 ` Kishon Vijay Abraham I
2019-02-13 13:26 ` [PATCH v3 4/9] PCI: keystone: Use hwirq to get the MSI " Kishon Vijay Abraham I
2019-02-13 13:26 ` Kishon Vijay Abraham I
2019-02-13 13:26 ` [PATCH v3 5/9] PCI: keystone: Cleanup ks_pcie_msi_irq_handler and ks_pcie_legacy_irq_handler Kishon Vijay Abraham I
2019-02-13 13:26 ` Kishon Vijay Abraham I
2019-02-13 13:26 ` [PATCH v3 6/9] PCI: dwc: Add support to use non default msi_irq_chip Kishon Vijay Abraham I
2019-02-13 13:26 ` Kishon Vijay Abraham I
2019-02-13 13:26 ` [PATCH v3 7/9] PCI: keystone: Use Keystone specific msi_irq_chip Kishon Vijay Abraham I
2019-02-13 13:26 ` Kishon Vijay Abraham I
2019-02-13 13:26 ` Kishon Vijay Abraham I [this message]
2019-02-13 13:26 ` [PATCH v3 8/9] PCI: dwc: Remove Keystone specific dw_pcie_host_ops Kishon Vijay Abraham I
2019-02-13 13:26 ` [PATCH v3 9/9] PCI: dwc: Do not write to MSI control registers if the platform doesn't use it Kishon Vijay Abraham I
2019-02-13 13:26 ` Kishon Vijay Abraham I
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190213132629.24790-9-kishon@ti.com \
--to=kishon@ti.com \
--cc=bhelgaas@google.com \
--cc=gustavo.pimentel@synopsys.com \
--cc=jingoohan1@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=m-karicheri2@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.