From: Stuart Menefy <stuart.menefy@mathembedded.com>
To: Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Russell King <linux@armlinux.org.uk>,
Kukjin Kim <kgene@kernel.org>,
Krzysztof Kozlowski <krzk@kernel.org>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 3/4] ARM: dts: exynos: Add interrupts for dedicated EINTs on Exynos5260
Date: Tue, 19 Feb 2019 13:03:36 +0000 [thread overview]
Message-ID: <20190219130337.21353-4-stuart@menefy.org> (raw)
In-Reply-To: <20190219130337.21353-1-stuart@menefy.org>
From: Stuart Menefy <stuart.menefy@mathembedded.com>
Add the missing interrupt information for the GPIO lines with
dedicated EINT interrupts.
Signed-off-by: Stuart Menefy <stuart.menefy@mathembedded.com>
---
arch/arm/boot/dts/exynos5260-pinctrl.dtsi | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/arch/arm/boot/dts/exynos5260-pinctrl.dtsi b/arch/arm/boot/dts/exynos5260-pinctrl.dtsi
index b1edb20b789e..17e2f3e0d71e 100644
--- a/arch/arm/boot/dts/exynos5260-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5260-pinctrl.dtsi
@@ -153,6 +153,14 @@
#gpio-cells = <2>;
interrupt-controller;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <2>;
};
@@ -161,6 +169,14 @@
#gpio-cells = <2>;
interrupt-controller;
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <2>;
};
--
2.13.6
WARNING: multiple messages have this Message-ID (diff)
From: Stuart Menefy <stuart.menefy@mathembedded.com>
To: Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Russell King <linux@armlinux.org.uk>,
Kukjin Kim <kgene@kernel.org>,
Krzysztof Kozlowski <krzk@kernel.org>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 3/4] ARM: dts: exynos: Add interrupts for dedicated EINTs on Exynos5260
Date: Tue, 19 Feb 2019 13:03:36 +0000 [thread overview]
Message-ID: <20190219130337.21353-4-stuart@menefy.org> (raw)
In-Reply-To: <20190219130337.21353-1-stuart@menefy.org>
From: Stuart Menefy <stuart.menefy@mathembedded.com>
Add the missing interrupt information for the GPIO lines with
dedicated EINT interrupts.
Signed-off-by: Stuart Menefy <stuart.menefy@mathembedded.com>
---
arch/arm/boot/dts/exynos5260-pinctrl.dtsi | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/arch/arm/boot/dts/exynos5260-pinctrl.dtsi b/arch/arm/boot/dts/exynos5260-pinctrl.dtsi
index b1edb20b789e..17e2f3e0d71e 100644
--- a/arch/arm/boot/dts/exynos5260-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5260-pinctrl.dtsi
@@ -153,6 +153,14 @@
#gpio-cells = <2>;
interrupt-controller;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <2>;
};
@@ -161,6 +169,14 @@
#gpio-cells = <2>;
interrupt-controller;
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <2>;
};
--
2.13.6
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-02-19 13:03 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-19 13:03 [PATCH v2 0/4] Devicetree updates for Exynos 5260 Stuart Menefy
2019-02-19 13:03 ` Stuart Menefy
2019-02-19 13:03 ` [PATCH v2 1/4] ARM: dts: exynos: Use bustop PLL as the source for MMC clocks on Exynos5260 Stuart Menefy
2019-02-19 13:03 ` Stuart Menefy
2019-02-19 13:03 ` [PATCH v2 2/4] ARM: dts: exynos: Add high speed I2C ports for exynos5260 Stuart Menefy
2019-02-19 13:03 ` Stuart Menefy
2019-02-19 13:03 ` Stuart Menefy [this message]
2019-02-19 13:03 ` [PATCH v2 3/4] ARM: dts: exynos: Add interrupts for dedicated EINTs on Exynos5260 Stuart Menefy
2019-02-19 13:03 ` [PATCH v2 4/4] ARM: dts: exynos: Fix interrupt for shared " Stuart Menefy
2019-02-19 13:03 ` Stuart Menefy
2019-02-20 13:59 ` [PATCH v2 0/4] Devicetree updates for Exynos 5260 Krzysztof Kozlowski
2019-02-20 13:59 ` Krzysztof Kozlowski
2019-02-20 13:59 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190219130337.21353-4-stuart@menefy.org \
--to=stuart.menefy@mathembedded.com \
--cc=devicetree@vger.kernel.org \
--cc=kgene@kernel.org \
--cc=krzk@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.