From: Linus Walleij <linus.walleij@linaro.org> To: linux-arm-kernel@lists.infradead.org, Imre Kaloz <kaloz@openwrt.org>, Krzysztof Halasa <khalasa@piap.pl> Cc: devicetree@vger.kernel.org, Linus Walleij <linus.walleij@linaro.org> Subject: [PATCH 28/30 v2] soc: ixp4xx: qmgr: Add DT bindings for IXP4xx qmgr Date: Thu, 21 Feb 2019 16:44:56 +0100 [thread overview] Message-ID: <20190221154458.23763-29-linus.walleij@linaro.org> (raw) In-Reply-To: <20190221154458.23763-1-linus.walleij@linaro.org> This adds device tree bindings for the Intel IXP4xx AHB Queue Manager. Cc: devicetree@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- .../misc/intel,ixp4xx-queue-manager.yaml | 57 +++++++++++++++++++ 1 file changed, 57 insertions(+) create mode 100644 Documentation/devicetree/bindings/misc/intel,ixp4xx-queue-manager.yaml diff --git a/Documentation/devicetree/bindings/misc/intel,ixp4xx-queue-manager.yaml b/Documentation/devicetree/bindings/misc/intel,ixp4xx-queue-manager.yaml new file mode 100644 index 000000000000..c324860bede5 --- /dev/null +++ b/Documentation/devicetree/bindings/misc/intel,ixp4xx-queue-manager.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 Linaro Ltd. +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/misc/intel-ixp4xx-ahb-queue-manager.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Intel IXP4xx AHB Queue Manager + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +description: | + The IXP4xx AHB Queue Manager maintains queues as circular buffers in + an 8KB embedded SRAM along with hardware pointers. It is used by both + the XScale processor and the NPEs (Network Processing Units) in the + IXP4xx for accelerating queues, especially for networking. Clients pick + queues from the queue manager with foo-queue = <&qmgr N> where the + &qmgr is a phandle to the queue manager and N is the queue resource + number. The queue resources available and their specific purpose + on a certain IXP4xx system will vary. + +properties: + compatible: + oneOf: + - items: + - const: intel,ixp4xx-ahb-queue-manager + + reg: + items: + - description: Queue Manager MMIO range + + interrupts: + minItems: 2 + maxItems: 2 + items: + - description: Interrupt for queues 0-31 + - description: Interrupt for queues 32-63 + + '#queue-cells': + const: 1 + +required: + - compatible + - reg + - interrupts + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + qmgr: queue-manager@60000000 { + compatible = "intel,ixp4xx-ahb-queue-manager"; + reg = <0x60000000 0x4000>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH>, <4 IRQ_TYPE_LEVEL_HIGH>; + #queue-cells = <1>; + }; -- 2.20.1
WARNING: multiple messages have this Message-ID (diff)
From: Linus Walleij <linus.walleij@linaro.org> To: linux-arm-kernel@lists.infradead.org, Imre Kaloz <kaloz@openwrt.org>, Krzysztof Halasa <khalasa@piap.pl> Cc: devicetree@vger.kernel.org, Linus Walleij <linus.walleij@linaro.org> Subject: [PATCH 28/30 v2] soc: ixp4xx: qmgr: Add DT bindings for IXP4xx qmgr Date: Thu, 21 Feb 2019 16:44:56 +0100 [thread overview] Message-ID: <20190221154458.23763-29-linus.walleij@linaro.org> (raw) In-Reply-To: <20190221154458.23763-1-linus.walleij@linaro.org> This adds device tree bindings for the Intel IXP4xx AHB Queue Manager. Cc: devicetree@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- .../misc/intel,ixp4xx-queue-manager.yaml | 57 +++++++++++++++++++ 1 file changed, 57 insertions(+) create mode 100644 Documentation/devicetree/bindings/misc/intel,ixp4xx-queue-manager.yaml diff --git a/Documentation/devicetree/bindings/misc/intel,ixp4xx-queue-manager.yaml b/Documentation/devicetree/bindings/misc/intel,ixp4xx-queue-manager.yaml new file mode 100644 index 000000000000..c324860bede5 --- /dev/null +++ b/Documentation/devicetree/bindings/misc/intel,ixp4xx-queue-manager.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 Linaro Ltd. +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/misc/intel-ixp4xx-ahb-queue-manager.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Intel IXP4xx AHB Queue Manager + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +description: | + The IXP4xx AHB Queue Manager maintains queues as circular buffers in + an 8KB embedded SRAM along with hardware pointers. It is used by both + the XScale processor and the NPEs (Network Processing Units) in the + IXP4xx for accelerating queues, especially for networking. Clients pick + queues from the queue manager with foo-queue = <&qmgr N> where the + &qmgr is a phandle to the queue manager and N is the queue resource + number. The queue resources available and their specific purpose + on a certain IXP4xx system will vary. + +properties: + compatible: + oneOf: + - items: + - const: intel,ixp4xx-ahb-queue-manager + + reg: + items: + - description: Queue Manager MMIO range + + interrupts: + minItems: 2 + maxItems: 2 + items: + - description: Interrupt for queues 0-31 + - description: Interrupt for queues 32-63 + + '#queue-cells': + const: 1 + +required: + - compatible + - reg + - interrupts + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + qmgr: queue-manager@60000000 { + compatible = "intel,ixp4xx-ahb-queue-manager"; + reg = <0x60000000 0x4000>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH>, <4 IRQ_TYPE_LEVEL_HIGH>; + #queue-cells = <1>; + }; -- 2.20.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-02-21 15:44 UTC|newest] Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-02-21 15:44 [PATCH 00/30 v2] ARM: ixp4xx: Modernize and DT support Linus Walleij 2019-02-21 15:44 ` [PATCH 01/30 v2] ARM: ixp4xx: Convert to MULTI_IRQ_HANDLER Linus Walleij 2019-02-21 15:44 ` [PATCH 02/30 v2] ARM: ixp4xx: Pass IRQ resource to beeper Linus Walleij 2019-02-21 15:44 ` [PATCH 03/30 v2] ARM: ixp4xx: Convert to SPARSE_IRQ Linus Walleij 2019-02-21 15:44 ` [PATCH 04/30 v2] irqchip: Add driver for IXP4xx Linus Walleij 2019-02-22 9:51 ` Marc Zyngier 2019-02-21 15:44 ` [PATCH 05/30 v2] gpio: ixp4xx: Add driver for the IXP4xx GPIO Linus Walleij 2019-02-21 15:44 ` [PATCH 06/30 v2] ARM: ixp4xx: Switch to use new IRQ+GPIO drivers Linus Walleij 2019-02-22 9:51 ` Marc Zyngier 2019-02-21 15:44 ` [PATCH 07/30 v2] clocksource/drivers/ixp4xx: Add driver Linus Walleij 2019-02-21 20:54 ` Daniel Lezcano 2019-03-03 9:35 ` Linus Walleij 2019-02-21 15:44 ` [PATCH 08/30 v2] ARM: ixp4xx: Switch to use new timer driver Linus Walleij 2019-02-22 8:38 ` Daniel Lezcano 2019-02-21 15:44 ` [PATCH 09/30 v2] irqchip: ixp4xx: Add DT bindings Linus Walleij 2019-02-21 15:44 ` Linus Walleij 2019-02-21 21:39 ` Rob Herring 2019-02-21 21:39 ` Rob Herring 2019-02-21 15:44 ` [PATCH 10/30 v2] irqchip: ixp4xx: Add OF initialization support Linus Walleij 2019-02-22 9:53 ` Marc Zyngier 2019-02-21 15:44 ` [PATCH 11/30 v2] clocksource/drivers/ixp4xx: Add DT bindings Linus Walleij 2019-02-21 15:44 ` Linus Walleij 2019-02-21 21:40 ` Rob Herring 2019-02-21 21:40 ` Rob Herring 2019-02-21 15:44 ` [PATCH 12/30 v2] clocksource/drivers/ixp4xx: Add OF initialization support Linus Walleij 2019-02-21 15:44 ` [PATCH 13/30 v2] gpio: ixp4xx: Add DT bindings Linus Walleij 2019-02-21 15:44 ` Linus Walleij 2019-02-21 15:44 ` [PATCH 14/30 v2] gpio: ixp4xx: Add OF probing support Linus Walleij 2019-02-21 15:44 ` [PATCH 15/30 v2] ARM: ixp4xx: Add DT bindings Linus Walleij 2019-02-21 15:44 ` Linus Walleij 2019-02-21 15:44 ` [PATCH 16/30 v2] ARM: ixp4xx: Add device tree boot support Linus Walleij 2019-02-21 15:44 ` [PATCH 17/30 v2] ARM: dts: Add some initial IXP4xx device trees Linus Walleij 2019-02-21 15:44 ` [PATCH 18/30 v2] ARM: ixp4xx: Move NPE and QMGR to drivers/soc Linus Walleij 2019-02-21 15:44 ` [PATCH 19/30 v2] ARM: ixp4xx: Move IXP4xx QMGR and NPE headers Linus Walleij 2019-02-21 15:44 ` [PATCH 20/30 v2] ARM: ixp4xx: Turn the NPE into a platform device Linus Walleij 2019-02-21 15:44 ` [PATCH 21/30 v2] ARM: ixp4xx: Turn the QMGR " Linus Walleij 2019-02-21 15:44 ` [PATCH 22/30 v2] soc: ixp4xx: npe: Pass addresses as resources Linus Walleij 2019-02-21 15:44 ` [PATCH 23/30 v2] soc: ixp4xx: Uninline several functions Linus Walleij 2019-02-21 15:44 ` [PATCH 24/30 v2] soc: ixp4xx: Remove unused functions Linus Walleij 2019-02-21 15:44 ` [PATCH 25/30 v2] soc: ixp4xx: qmgr: Pass resources Linus Walleij 2019-02-21 15:44 ` [PATCH 26/30 v2] soc: ixp4xx: Add DT bindings for IXP4xx NPE Linus Walleij 2019-02-21 15:44 ` Linus Walleij 2019-02-21 21:48 ` Rob Herring 2019-02-21 21:48 ` Rob Herring 2019-02-22 10:37 ` Linus Walleij 2019-02-22 10:37 ` Linus Walleij 2019-02-21 15:44 ` [PATCH 27/30 v2] soc: ixp4xx: npe: Add DT probe code Linus Walleij 2019-02-21 15:44 ` Linus Walleij [this message] 2019-02-21 15:44 ` [PATCH 28/30 v2] soc: ixp4xx: qmgr: Add DT bindings for IXP4xx qmgr Linus Walleij 2019-02-21 22:00 ` Rob Herring 2019-02-21 22:00 ` Rob Herring 2019-02-21 15:44 ` [PATCH 29/30 v2] soc: ixp4xx: qmgr: Add DT probe code Linus Walleij 2019-02-21 15:44 ` [PATCH 30/30 v2] ARM: dts: Add queue manager and NPE to the IXP4xx DTSI Linus Walleij 2019-03-18 7:16 ` [PATCH 00/30 v2] ARM: ixp4xx: Modernize and DT support Krzysztof Hałasa 2019-03-18 22:16 ` Linus Walleij 2019-04-02 12:12 ` Krzysztof Hałasa
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20190221154458.23763-29-linus.walleij@linaro.org \ --to=linus.walleij@linaro.org \ --cc=devicetree@vger.kernel.org \ --cc=kaloz@openwrt.org \ --cc=khalasa@piap.pl \ --cc=linux-arm-kernel@lists.infradead.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.