From: Chen-Yu Tsai <wens@kernel.org> To: Maxime Ripard <maxime.ripard@bootlin.com>, Sebastian Reichel <sre@kernel.org> Cc: Chen-Yu Tsai <wens@csie.org>, linux-pm@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com, Hans de Goede <hdegoede@redhat.com> Subject: [PATCH v4 7/7] ARM: dts: sun8i: a83t: Enable USB OTG controller on some boards Date: Tue, 16 Apr 2019 14:40:24 +0800 [thread overview] Message-ID: <20190416064024.20414-8-wens@kernel.org> (raw) In-Reply-To: <20190416064024.20414-1-wens@kernel.org> From: Chen-Yu Tsai <wens@csie.org> The Bananapi M3 and Cubietruck Plus both have USB OTG ports wired to the SoC and PMIC in the same way, with the N_VBUSEN pin on the PMIC controlling VBUS output, the PMIC's VBUS input for sensing VBUS, and PH11 on the SoC for sensing the ID pin. Enable OTG on both boards. Signed-off-by: Chen-Yu Tsai <wens@csie.org> --- arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts | 12 ++++++++++++ arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts | 12 ++++++++++++ 2 files changed, 24 insertions(+) diff --git a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts index 838be7b3715f..9d34eabba121 100644 --- a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts +++ b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts @@ -389,7 +389,19 @@ }; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usb_power_supply { + status = "okay"; +}; + &usbphy { + usb0_id_det-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */ + usb0_vbus_power-supply = <&usb_power_supply>; + usb0_vbus-supply = <®_drivevbus>; usb1_vbus-supply = <®_usb1_vbus>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts index fcbec3d7ccd7..ea299d3d84d0 100644 --- a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts +++ b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts @@ -420,7 +420,19 @@ }; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usb_power_supply { + status = "okay"; +}; + &usbphy { + usb0_id_det-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */ + usb0_vbus_power-supply = <&usb_power_supply>; + usb0_vbus-supply = <®_drivevbus>; usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; -- 2.20.1
WARNING: multiple messages have this Message-ID (diff)
From: Chen-Yu Tsai <wens@kernel.org> To: Maxime Ripard <maxime.ripard@bootlin.com>, Sebastian Reichel <sre@kernel.org> Cc: devicetree@vger.kernel.org, linux-pm@vger.kernel.org, linux-sunxi@googlegroups.com, linux-kernel@vger.kernel.org, Hans de Goede <hdegoede@redhat.com>, Chen-Yu Tsai <wens@csie.org>, linux-arm-kernel@lists.infradead.org Subject: [PATCH v4 7/7] ARM: dts: sun8i: a83t: Enable USB OTG controller on some boards Date: Tue, 16 Apr 2019 14:40:24 +0800 [thread overview] Message-ID: <20190416064024.20414-8-wens@kernel.org> (raw) In-Reply-To: <20190416064024.20414-1-wens@kernel.org> From: Chen-Yu Tsai <wens@csie.org> The Bananapi M3 and Cubietruck Plus both have USB OTG ports wired to the SoC and PMIC in the same way, with the N_VBUSEN pin on the PMIC controlling VBUS output, the PMIC's VBUS input for sensing VBUS, and PH11 on the SoC for sensing the ID pin. Enable OTG on both boards. Signed-off-by: Chen-Yu Tsai <wens@csie.org> --- arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts | 12 ++++++++++++ arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts | 12 ++++++++++++ 2 files changed, 24 insertions(+) diff --git a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts index 838be7b3715f..9d34eabba121 100644 --- a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts +++ b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts @@ -389,7 +389,19 @@ }; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usb_power_supply { + status = "okay"; +}; + &usbphy { + usb0_id_det-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */ + usb0_vbus_power-supply = <&usb_power_supply>; + usb0_vbus-supply = <®_drivevbus>; usb1_vbus-supply = <®_usb1_vbus>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts index fcbec3d7ccd7..ea299d3d84d0 100644 --- a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts +++ b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts @@ -420,7 +420,19 @@ }; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usb_power_supply { + status = "okay"; +}; + &usbphy { + usb0_id_det-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */ + usb0_vbus_power-supply = <&usb_power_supply>; + usb0_vbus-supply = <®_drivevbus>; usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; -- 2.20.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-04-16 6:40 UTC|newest] Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-04-16 6:40 [PATCH v4 0/7] ARM: sun8i: a83t: Enable USB OTG Chen-Yu Tsai 2019-04-16 6:40 ` Chen-Yu Tsai 2019-04-16 6:40 ` Chen-Yu Tsai 2019-04-16 6:40 ` [PATCH v4 1/7] dt-bindings: power: supply: axp20x_usb_power: add axp813 compatible Chen-Yu Tsai 2019-04-16 6:40 ` Chen-Yu Tsai 2019-04-16 6:40 ` Chen-Yu Tsai 2019-04-16 6:40 ` [PATCH v4 2/7] power: supply: axp20x_usb_power: Fix typo in VBUS current limit macros Chen-Yu Tsai 2019-04-16 6:40 ` Chen-Yu Tsai 2019-04-16 6:40 ` Chen-Yu Tsai 2019-04-16 6:40 ` [PATCH v4 3/7] power: supply: axp20x_usb_power: use polling to detect vbus status change Chen-Yu Tsai 2019-04-16 6:40 ` Chen-Yu Tsai 2019-04-16 6:40 ` Chen-Yu Tsai 2019-04-16 6:40 ` [PATCH v4 4/7] power: supply: axp20x_usb_power: add function to get max current Chen-Yu Tsai 2019-04-16 6:40 ` Chen-Yu Tsai 2019-04-16 6:40 ` [PATCH v4 5/7] power: supply: axp20x_usb_power: add support for AXP813 Chen-Yu Tsai 2019-04-16 6:40 ` Chen-Yu Tsai 2019-04-16 6:40 ` Chen-Yu Tsai 2019-04-16 6:40 ` [PATCH v4 6/7] ARM: dtsi: axp81x: add USB power supply node Chen-Yu Tsai 2019-04-16 6:40 ` Chen-Yu Tsai 2019-04-16 6:40 ` Chen-Yu Tsai [this message] 2019-04-16 6:40 ` [PATCH v4 7/7] ARM: dts: sun8i: a83t: Enable USB OTG controller on some boards Chen-Yu Tsai 2019-04-17 21:27 ` [PATCH v4 0/7] ARM: sun8i: a83t: Enable USB OTG Sebastian Reichel 2019-04-17 21:27 ` Sebastian Reichel 2019-04-17 21:27 ` Sebastian Reichel 2019-04-18 15:49 ` Maxime Ripard 2019-04-18 15:49 ` Maxime Ripard 2019-04-18 15:49 ` Maxime Ripard
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20190416064024.20414-8-wens@kernel.org \ --to=wens@kernel.org \ --cc=devicetree@vger.kernel.org \ --cc=hdegoede@redhat.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-pm@vger.kernel.org \ --cc=linux-sunxi@googlegroups.com \ --cc=maxime.ripard@bootlin.com \ --cc=sre@kernel.org \ --cc=wens@csie.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.